Human neural cell interactions with orientated electrospun nanofibers in vitro

Aim: Electrospun nanofibers represent potent guidance substrates for nervous tissue repair. Development of nanofiber-based scaffolds for CNS repair requires, as a first step, an understanding of appropriate neural cell type-substrate interactions. Materials & methods: Astrocyte–nanofiber interactions (e.g., adhesion, proliferation, process extension and migration) were studied by comparing human neural progenitor-derived astrocytes (hNP-ACs) and a human astrocytoma cell line (U373) with aligned polycaprolactone (PCL) nanofibers or blended (25% type I collagen/75% PCL) nanofibers. Neuron–nanofiber interactions were assessed using a differentiated human neuroblastoma cell line (SH-SY5Y). Results & discussion: U373 cells and hNP-AC showed similar process alignment and length when associated with PCL or Type I collagen/PCL nanofibers. Cell adhesion and migration by hNP-AC were clearly improved by functionalization of nanofiber surfaces with type I collagen. Functionalized nanofibers had no such effect on U373 cells. Another clear difference between the U373 cells and hNP-AC interactions with the nanofiber substrate was proliferation; the cell line demonstrating strong proliferation, whereas the hNP-AC line showed no proliferation on either type of nanofiber. Long axonal growth (up to 600 µm in length) of SH-SY5Y neurons followed the orientation of both types of nanofibers even though adhesion of the processes to the fibers was poor. Conclusion: The use of cell lines is of only limited predictive value when studying cell–substrate interactions but both morphology and alignment of human astrocytes were affected profoundly by nanofibers. Nanofiber surface functionalization with collagen significantly improved hNP-AC adhesion and migration. Alternative forms of functionalization may be required for optimal axon–nanofiber interactions.

Sub-tropical high-density, low rise residential buildings: case study 3

The case study 3 team viewed the mitigation of noise and air pollution generated in the transport corridor that borders the study site to be a paramount driver of the urban design solution. These key urban planning strategies were adopted: * Spatial separation from transport corridor pollution source. A linear green zone and environmental buffer was proposed adjacent to the transport corridor to mitigate the environmental noise and air quality impacts of the corridor, and to offer residents opportunities for recreation * Open space forming the key structural principle for neighbourhood design. A significant open space system underpins the planning and manages surface water flows. * Urban blocks running on east-west axis. The open space rationale emphasises an east-west pattern for local streets. Street alignment allows for predominantly north-south facing terrace type buildings which both face the street and overlook the green courtyard formed by the perimeter buildings. The results of the ESD assessment of the typologies conclude that the design will achieve good outcomes through: * Lower than average construction costs compared with other similar projects * Thermal comfort; A good balance between daylight access and solar gains is achieved * The energy rating achieved for the units is 8.5 stars.

The social orders of family mealtime

This study examined the everyday practices of families within the context of family mealtime to investigate how members accomplished mealtime interactions. Using an ethnomethodological approach, conversation analysis and membership categorization analysis, the study investigated the interactional resources that family members used to assemble their social orders moment by moment during family mealtimes. While there is interest in mealtimes within educational policy, health research and the media, there remain few studies that provide fine-grained detail about how members produce the social activity of having a family meal. Findings from this study contribute empirical understandings about families and family mealtime. Two families with children aged 2 to 10 years were observed as they accomplished their everyday mealtime activities. Data collection took place in the family homes where family members video recorded their naturally occurring mealtimes. Each family was provided with a video camera for a one-month period and they decided which mealtimes they recorded, a method that afforded participants greater agency in the data collection process and made available to the analyst a window into the unfolding of the everyday lives of the families. A total of 14 mealtimes across the two families were recorded, capturing 347 minutes of mealtime interactions. Selected episodes from the data corpus, which includes centralised breakfast and dinnertime episodes, were transcribed using the Jeffersonian system. Three data chapters examine extended sequences of family talk at mealtimes, to show the interactional resources used by members during mealtime interactions. The first data chapter explores multiparty talk to show how the uniqueness of the occasion of having a meal influences turn design. It investigates the ways in which members accomplish two-party talk within a multiparty setting, showing how one child "tells" a funny story to accomplish the drawing together of his brothers as an audience. As well, this chapter identifies the interactional resources used by the mother to cohort her children to accomplish the choralling of grace. The second data chapter draws on sequential and categorical analysis to show how members are mapped to a locally produced membership category. The chapter shows how the mapping of members into particular categories is consequential for social order; for example, aligning members who belong to the membership category "had haircuts" and keeping out those who "did not have haircuts". Additional interactional resources such as echoing, used here to refer to the use of exactly the same words, similar prosody and physical action, and increasing physical closeness, are identified as important to the unfolding talk particularly as a way of accomplishing alignment between the grandmother and grand-daughter. The third and final data analysis chapter examines topical talk during family mealtimes. It explicates how members introduce topics of talk with an orientation to their co-participant and the way in which the take up of a topic is influenced both by the sequential environment in which it is introduced and the sensitivity of the topic. Together, these three data chapters show aspects of how family members participated in family mealtimes. The study contributes four substantive themes that emerged during the analytic process and, as such, the themes reflect what the members were observed to be doing. The first theme identified how family knowledge was relevant and consequential for initiating and sustaining interaction during mealtime with, for example, members buying into the talk of other members or being requested to help out with knowledge about a shared experience. Knowledge about members and their activities was evident with the design of questions evidencing an orientation to coparticipant’s knowledge. The second theme found how members used topic as a resource for social interaction. The third theme concerned the way in which members utilised membership categories for producing and making sense of social action. The fourth theme, evident across all episodes selected for analysis, showed how children’s competence is an ongoing interactional accomplishment as they manipulated interactional resources to manage their participation in family mealtime. The way in which children initiated interactions challenges previous understandings about children’s restricted rights as conversationalists. As well as making a theoretical contribution, the study offers methodological insight by working with families as research participants. The study shows the procedures involved as the study moved from one where the researcher undertook the decisions about what to videorecord to offering this decision making to the families, who chose when and what to videorecord of their mealtime practices. Evident also are the ways in which participants orient both to the video-camera and to the absent researcher. For the duration of the mealtime the video-camera was positioned by the adults as out of bounds to the children; however, it was offered as a "treat" to view after the mealtime was recorded. While situated within family mealtimes and reporting on the experiences of two families, this study illuminates how mealtimes are not just about food and eating; they are social. The study showed the constant and complex work of establishing and maintaining social orders and the rich array of interactional resources that members draw on during family mealtimes. The family’s interactions involved members contributing to building the social orders of family mealtime. With mealtimes occurring in institutional settings involving young children, such as long day care centres and kindergartens, the findings of this study may help educators working with young children to see the rich interactional opportunities mealtimes afford children, the interactional competence that children demonstrate during mealtimes, and the important role/s that adults may assume as co-participants in interactions with children within institutional settings.

Realising dead path elimination in BPMN

The Web Service Business Process Execution Language (BPEL) lacks any standard graphical notation. Various efforts have been undertaken to visualize BPEL using the Business Process Modelling Notation (BPMN). Although this is straightforward for the majority of concepts, it is tricky for the full BPEL standard, partly due to the insufficiently specified BPMN execution semantics. The upcoming BPMN 2.0 revision will provide this clear semantics. In this paper, we show how the dead path elimination (DPE) capabilities of BPEL can be expressed with this new semantics and discuss the limitations. We provide a generic formal definition of DPE and discuss resulting control flow requirements independent of specific process description languages.

Determinants of driver vs. second row occupant posture modelling

Digital human modeling (DHM), as a convenient and cost-effective tool, is increasingly incorporated into product and workplace design. In product design, it is predominantly used for the development of driver-vehicle systems. Most digital human modeling software tools, such as JACK, RAMSIS and DELMIA HUMANBUILDER provide functions to predict posture and positions for drivers with selected anthropometry according to SAE (Society of Automotive Engineers) Recommended Practices and other ergonomics guidelines. However, few studies have presented 2nd row passenger postural information, and digital human modeling of these passenger postures cannot be performed directly using the existing driver posture prediction functions. In this paper, the significant studies related to occupant posture and modeling were reviewed and a framework of determinants of driver vs. 2nd row occupant posture modeling was extracted. The determinants which are regarded as input factors for posture modeling include target population anthropometry, vehicle package geometry and seat design variables as well as task definitions. The differences between determinants of driver and 2nd row occupant posture models are significant, as driver posture modeling is primarily based on the position of the foot on the accelerator pedal (accelerator actuation point AAP, accelerator heel point AHP) and the hands on the steering wheel (steering wheel centre point A-Point). The objectives of this paper are aimed to investigate those differences between driver and passenger posture, and to supplement the existing parametric model for occupant posture prediction. With the guide of the framework, the associated input parameters of occupant digital human models of both driver and second row occupant will be identified. Beyond the existing occupant posture models, for example a driver posture model could be modified to predict second row occupant posture, by adjusting the associated input parameters introduced in this paper. This study combines results from a literature review and the theoretical modeling stage of a second row passenger posture prediction model project.

How do the learning outcomes of students compare in units with different levels of practical work? A comparative study about the relation between Problem-­Based Learning and assessment approaches

The literature supporting the notion that active, student-centered learning is superior to passive, teacher-centered instruction is encyclopedic (Bonwell & Eison, 1991; Bruning, Schraw, & Ronning, 1999; Haile, 1997a, 1997b, 1998; Johnson, Johnson, & Smith, 1999). Previous action research demonstrated that introducing a learning activity in class improved the learning outcomes of students (Mejias, 2010). People acquire knowledge and skills through practice and reflection, not by watching and listening to others telling them how to do something. In this context, this project aims to find more insights about the level of interactivity in the curriculum a class should have and its alignment with assessment so the intended learning outcomes (ILOs) are achieved. In this project, interactivity is implemented in the form of problem- based learning (PBL). I present the argument that a more continuous formative feedback when implemented with the correct amount of PBL stimulates student engagement bringing enormous benefits to student learning. Different levels of practical work (PBL) were implemented together with two different assessment approaches in two subjects. The outcomes were measured using qualitative and quantitative data to evaluate the levels of student engagement and satisfaction in the terms of ILOs.

The effect of lumbar support on the trunk muscle activity and pelvic tilt in a passenger vehicle car seat

In order to gain a competitive edge in the market, automotive manufacturers and automotive seat suppliers have identified seat ergonomics for further development to improve overall vehicle comfort. Adjustable lumbar support devices have been offered since long as comfort systems in either a 2-way or 4-way adjustable configuration, although their effect on lumbar strain is not well documented. The effect of a lumbar support on posture and muscular strain, and therefore the relationship between discomfort and comfort device parameter settings, requires clarification. The aim of this paper is to study the effect of a 4-way lumbar support on lower trunk and pelvis muscle activity, pelvic tilt and spine curvature during a car seating activity. 10 healthy subjects (5 m/f; age 19-39) performed a seating activity in a passenger vehicle with seven different static lumbar support positions. The lumbar support was tested in 3 different height positions in relation to the seatback surface centreline (high, centre, low), each having 2 depths positions (lumbar prominence). An extra depth position was added for the centre position. Posture data were collected using a VICON MX motion capture system and NORAXON DTS goniometers and inclinometer. A rigid-body model of an adjustable car seat with four-way adjustable lumbar support was constructed in UGS Siemens NX and connected to a musculoskeletal model of a seated-human, modelled in AnyBody. Wireless electromyography (EMG) was used to calibrate the musculoskeletal model and assess the relationship between (a) muscular strain and lumbar prominence (normal to seatback surface) respective to the lumbar height (alongside seatback surface), (b) hip joint moment and lumbar prominence (normal to seatback surface) respective to lumbar height (alongside seatback surface) and (c) pelvic tilt and lumbar prominence (normal to seatback surface) respective to the lumbar height (alongside seatback surface). This study was based on the assumption that the musculoskeletal human model was seated at the correct R-Point (SgRP), determined via the occupant packaging toolkit in the JACK digital human model. The effect of the interaction between the driver/car-seat has been investigated for factors resulting from the presence and adjustment of a 4-way lumbar support. The results obtained show that various seat adjustments, and driver’s lumbar supports can have complex influence on the muscle activation, joint forces and moments, all of which can affect the comfort perception of the driver. This study enables the automotive industry to optimise passenger vehicle seat development and design. It further more supports the evaluation of static postural and dynamic seat comfort in normal everyday driving tasks and can be applied for future car design to reduce investment and improve comfort.

Investigating the future of project management : a co-word analysis approach

If Project Management (PM) is a well-accepted mode of managing organizations, more and more organizations are adopting PM in order to satisfy the diversified needs of application areas within a variety of industries and organizations. Concurrently, the number of PM practitioners and people involved at various level of qualification is vigorously rising. Thus the importance to characterize, define and understand this field and its underlying strength, basis and development is paramount. For this purpose we will referee to sociology of actor-networks and qualitative scientometrics leading to the choice of the co-word analysis method in enabling us to capture the project management field and its dynamics. Results of a study based on the analysis of EBSCO Business Source Premier Database will be presented and some future trends and scenarios proposed. The main following trends are confirmed, in alignment with previous studies: continuous interest for the “cost engineering” aspects, on going interest for Economic aspects and contracts, how to deal with various project types (categorizations), the integration with Supply Chain Management and Learning and Knowledge Management. Furthermore besides these continuous trends, we can note new areas of interest: the link between strategy and project, Governance, the importance of maturity (organizational performance and metrics, control) and Change Management. We see the actors (Professional Bodies, Governmental Bodies, Agencies, Universities, Industries, Researchers, and Practitioners) reinforcing their competing/cooperative strategies in the development of standards and certifications and moving to more “business oriented” relationships with their members and main stakeholders (Governments, Institutions like European Community, Industries, Agencies, NGOs…), at least at central level.

Lean supply chain performance evaluation method

Increasing global competitiveness worldwide has forced manufacturing organizations to produce high-quality products more quickly and at a competitive cost which demand of continuous improvements techniques. In this paper, we propose a fuzzy based performance evaluation method for lean supply chain. To understand the overall performance of cost competitive supply chain, we investigate the alignment of market strategy and position of the supply chain. Competitive strategies can be achieved by using a different weight calculation for different supply chain situations. By identifying optimal performance metrics and applying performance evaluation methods, managers can predict the overall supply chain performance under lean strategy.

Taxation of multinational banks : using formulary apportionment to reflect economic reality (Part 1)

Formulary apportionment does not attempt to undertake a transactional division of a highly integrated multinational entity. Rather, it allocates income to the jurisdictions based on an economically justifiable formula. Opposition to formulary apportionment is generally based on the argument that it is not a theoretically superior (or optimal) model because of the implementation difficulties. The conclusion that the unitary taxation model may be theoretically superior to the current arm's-length model that applies to multinational banks, despite significant implementation, compliance, and enforcement issues, is based on the unitary taxation model providing greater alignment with the unique features of these banks. The formulary apportionment model looks to the economic substance of the multinational entity and, in this sense, adopts a substance-over- form approach. Formulary apportionment further recognizes the impossibility of using arm's-length pricing for economically interdependent multinational entities. A final advantage to formulary apportionment, which is also a consequence of this model achieving greater inter-nation equity, is the elimination of double taxation.

The taxation of multinational banks : alternative apportionment through a unitary taxation regime aligning with economic reality

The taxation of multinational banks currently is governed by the general principles of international tax. However, it is arguable that there are characteristics exclusive to multinational banks that may warrant the consideration of a separate taxing regime. This article argues that because of the unique nature of multinational banks, the traditional international tax rules governing jurisdiction to tax and allocation of income do not produce a result which is optimal, as it does not reflect economic reality. That is, the current system does not produce a result that accurately reflects the economic source of the income or the location of the economic activity. The suggested alternative is unitary taxation using global formulary apportionment. Formulary apportionment is considered as an alternative that reflects economic reality by recognising the unique nature of multinational banks and allocating the income to the location of the economic activity. The unique nature of multinational banking is recognised in the fact that formulary apportionment does not attempt to undertake a transactional division of a highly integrated multinational entity. Rather, it allocates income to the jurisdictions based on an economically justifiable formula. Starting from this recognition, the purpose of this article is to demonstrate that formulary apportionment is a theoretically superior (or optimal) model for the taxation of multinational banks. An optimal regime, for the purposes of this article, is considered to be one that distributes the taxing rights in an equitable manner between the relevant jurisdictions, while, simultaneously allowing decisions of the international banks to be tax neutral. In this sense, neutrality is viewed as an economic concept and equity is regarded as a legal concept. A neutral tax system is one in which tax rules do not affect economic choices about commercial activities. Neutrality will ideally be across jurisdictions as well as across traditional and non-traditional industries. The primary focus of this article is jurisdictional neutrality. A system that distributes taxing rights in an equitable manner between the relevant jurisdictions ensures that each country receives its fair share of tax revenue. Given the increase in multinational banking, jurisdictions should be concerned that they are receiving their fair share. Inter-nation equity is concerned with re-determining the proper division of the tax base among countries. Richard and Peggy Musgrave argue that sharing of the tax base by countries of source should be seen as a matter of inter-nation equity requiring international cooperation. The rights of the jurisdiction of residency will also be at issue. To this extent, while it is agreed that inter-nation equity is an essential attribute to an international tax regime, there is no universal agreement as to how to achieve it. The current system attempts to achieve such equity through a combined residency and source regime, with the transfer pricing rules used to apportion income between the relevant jurisdictions. However, this article suggests, that as an alternative to the current regime, equity would be achieved through formulary apportionment. Opposition to formulary apportionment is generally based on the argument that it is not a theoretically superior (or optimal) model because of the implementation difficulties. Yet these are two separate issues. As such, this article is divided into two core parts. The first part examines the theoretical soundness of the formulary apportionment model concluding that it is theoretically superior to the arm’s length pricing requirement of the traditional transfer pricing regime. The second part examines the practical implications of accepting formulary apportionment as an optimal model with a view to disclosing the issues that arise when a formulary apportionment regime is adopted. Prior to an analysis of the theoretical and practical application of formulary apportionment to multinational banks, the unique nature of these banks is considered. The article concludes that, while there are significant implementation, compliance, and enforcement issues to overcome, the unitary taxation model may be theoretically superior to the current arm’s length model which applies to multinational banks. This conclusion is based on the unitary taxation model providing greater alignment with the unique features of these banks.

Aligning sustainability and the Torrens register : challenges and recommendations for reform

‘Sustainability’ is a policy mantra of modern governments particularly in relation to natural resources. The traditional connection between land ownership and access to natural resources, such as forestry, flora, fauna, minerals, water and energy, has given rise to an unprecedented number of restrictions and obligations on land owners in their use of the land and resources. The growing numbers of statutory exceptions and restrictions on rights of ownership and use of a fee simple holder presents serious challenges for the utility of the Torrens register, which was originally designed to record private interests in land or affecting title to land. Advocates proposing uniform Torrens legislation should give consideration to an alignment of government policies emphasising sustainability as a core requirement of effective land use and management, and the core Torrens concepts of indefeasibility and security of title. This article examines the challenges for a uniform Torrens system created by increases statutory regulation of land ownership and makes recommendations about how an effective alignment of sustainability objectives and Torrens principles may be achieved.

Implementing a systematic process for rapidly embedding sustainability within chemical engineering education: a case study of James Cook University, Australia

Sustainability has emerged as a primary context for engineering education in the 21st Century, particularly the sub-discipline of chemical engineering. However, there is confusion over how to go about integrating sustainability knowledge and skills systemically within bachelor degrees. This paper addresses this challenge, using a case study of an Australian chemical engineering degree to highlight important practical considerations for embedding sustainability at the core of the curriculum. The paper begins with context for considering a systematic process for rapid curriculum renewal. The authors then summarise a 2-year federally funded project, which comprised piloting a model for rapid curriculum renewal led by the chemical engineering staff. Model elements contributing to the renewal of this engineering degree and described in this paper include: industry outreach; staff professional development; attribute identification and alignment; program mapping; and curriculum and teaching resource development. Personal reflections on the progress and process of rapid curriculum renewal in sustainability by the authors and participating engineering staff will be presented as a means to discuss and identify methodological improvements, as well as highlight barriers to project implementation. It is hoped that this paper will provide an example of a formalised methodology on which program reform and curriculum renewal for sustainability can be built upon in other higher education institutions.

Bird evolution: testing the Metaves clade with six new mitochondrial genomes

Background Evolutionary biologists are often misled by convergence of morphology and this has been common in the study of bird evolution. However, the use of molecular data sets have their own problems and phylogenies based on short DNA sequences have the potential to mislead us too. The relationships among clades and timing of the evolution of modern birds (Neoaves) has not yet been well resolved. Evidence of convergence of morphology remain controversial. With six new bird mitochondrial genomes (hummingbird, swift, kagu, rail, flamingo and grebe) we test the proposed Metaves/Coronaves division within Neoaves and the parallel radiations in this primary avian clade. Results Our mitochondrial trees did not return the Metaves clade that had been proposed based on one nuclear intron sequence. We suggest that the high number of indels within the seventh intron of the β-fibrinogen gene at this phylogenetic level, which left a dataset with not a single site across the alignment shared by all taxa, resulted in artifacts during analysis. With respect to the overall avian tree, we find the flamingo and grebe are sister taxa and basal to the shorebirds (Charadriiformes). Using a novel site-stripping technique for noise-reduction we found this relationship to be stable. The hummingbird/swift clade is outside the large and very diverse group of raptors, shore and sea birds. Unexpectedly the kagu is not closely related to the rail in our analysis, but because neither the kagu nor the rail have close affinity to any taxa within this dataset of 41 birds, their placement is not yet resolved. Conclusion Our phylogenetic hypothesis based on 41 avian mitochondrial genomes (13,229 bp) rejects monophyly of seven Metaves species and we therefore conclude that the members of Metaves do not share a common evolutionary history within the Neoaves.