An investigation into factors affecting electron density calibration for a megavoltage cone-beam CT system

There is a growing interest in the use of megavoltage cone-beam computed tomography (MV CBCT) data for radiotherapy treatment planning. To calculate accurate dose distributions, knowledge of the electron density (ED) of the tissues being irradiated is required. In the case of MV CBCT, it is necessary to determine a calibration-relating CT number to ED, utilizing the photon beam produced for MV CBCT. A number of different parameters can affect this calibration. This study was undertaken on the Siemens MV CBCT system, MVision, to evaluate the effect of the following parameters on the reconstructed CT pixel value to ED calibration: the number of monitor units (MUs) used (5, 8, 15 and 60 MUs), the image reconstruction filter (head and neck, and pelvis), reconstruction matrix size (256 by 256 and 512 by 512), and the addition of extra solid water surrounding the ED phantom. A Gammex electron density CT phantom containing EDs from 0.292 to 1.707 was imaged under each of these conditions. The linear relationship between MV CBCT pixel value and ED was demonstrated for all MU settings and over the range of EDs. Changes in MU number did not dramatically alter the MV CBCT ED calibration. The use of different reconstruction filters was found to affect the MV CBCT ED calibration, as was the addition of solid water surrounding the phantom. Dose distributions from treatment plans calculated with simulated image data from a 15 MU head and neck reconstruction filter MV CBCT image and a MV CBCT ED calibration curve from the image data parameters and a 15 MU pelvis reconstruction filter showed small and clinically insignificant differences. Thus, the use of a single MV CBCT ED calibration curve is unlikely to result in any clinical differences. However, to ensure minimal uncertainties in dose reporting, MV CBCT ED calibration measurements could be carried out using parameter-specific calibration measurements.

Mineralogy of chondritic interplanetary dust particles

From a mineralogical survey of approximately 30 chondritic micrometeorites collected from the lower stratosphere and studied in detail using current electron microscopy techniques, it is concluded that these particles represent a unique group of extraterrestrial materials. These micrometeorites differ significantly in form and texture from components of carbonaceous chondrites and contain some mineral assemblages which do not occur in any meteorite class. Electron microscope investigations of chondritic micrometeorites have established that these materials (1) are extraterrestrial in origin, (2) existed in space as small objects, (3) endured minimal alteration by planetary processes since formation, and (4) can suffer minimal pulse heating (<600°C) on entering earth's atmosphere. The probable sources for chondritic interplanetary dust particles (IDPs) are cometary and asteroidal debris and, perhaps to a lesser extent, interstellar regions. These sources have not been conclusively linked to any specific mineralogical subset of IDP, although the chondritic porous (CP) aggregate is considered of likely cometary origin. Chondritic IDPs occur in two predominant mineral assemblages: (1) carbonaceous phases and phyllosilicates and (2) carbonaceous phases and nesosilicates or inosilicates, although particles with both types of silicate assemblages are observed. Olivines, pyroxenes, layer silicates, and carbon-rich phases are the most commonly occurring minerals in many chondritic IDPs. Other phases often observed in variable proportions include sulphides, spinels, metals, metal carbides, carbonates, and minor amounts of sulphates and phosphates. Individual mineral grain sizes range from micrometers (primarily pyroxenes and olivines) to nanometers, with the predominant size for all phases less than 100 nm. Specific mineral characteristics for particular chondritic IDPs provide an indication of processes which may have occurred prior to collection in the earth's stratosphere. For example, pyroxene mineralogy in some chondritic aggregates is consistent with condensation from a vapor phase and, we consider, with condensation in a turbulent solar nebula at relatively low temperatures (<1000°C). Carbonaceous phases present in other CP aggregates have been used to imply low-temperature formation processes such as Fischer-Tropsch synthesis (∼530°C) or carbonization and graphitization (∼315°C). Alteration processes have been implicated in the formation of some layer silicates in CP aggregates and may have involved hydrocryogenic alteration at <0°C. In general, interpretations of transformation processes on submicrometer-size minerals in chondritic IDPs are consistent with formation at a radius equivalent to the asteroid belt or greater during the later stages of solar nebula evolution using currently available models.

Family-based programmes for preventing smoking by children and adolescents

BACKGROUND: There is evidence that children's decisions to smoke are influenced by family and friends. OBJECTIVES: To assess the effectiveness of interventions to help family members to strengthen non-smoking attitudes and promote non-smoking by children and other family members. SEARCH STRATEGY: We searched 14 electronic bibliographic databases, including the Cochrane Tobacco Addiction Group specialized register, MEDLINE, EMBASE, PsycINFO and CINAHL. We also searched unpublished material, and the reference lists of key articles. We performed both free-text Internet searches and targeted searches of appropriate websites, and we hand-searched key journals not available electronically. We also consulted authors and experts in the field. The most recent search was performed in July 2006. SELECTION CRITERIA: Randomized controlled trials (RCTs) of interventions with children (aged 5-12) or adolescents (aged 13-18) and family members to deter the use of tobacco. The primary outcome was the effect of the intervention on the smoking status of children who reported no use of tobacco at baseline. Included trials had to report outcomes measured at least six months from the start of the intervention. DATA COLLECTION AND ANALYSIS: We reviewed all potentially relevant citations and retrieved the full text to determine whether the study was an RCT and matched our inclusion criteria. Two authors independently extracted study data and assessed them for methodological quality. The studies were too limited in number and quality to undertake a formal meta-analysis, and we present a narrative synthesis. MAIN RESULTS: We identified 19 RCTs of family interventions to prevent smoking. We identified five RCTs in Category 1 (minimal risk of bias on all counts); nine in Category 2 (a risk of bias in one or more areas); and five in Category 3 (risks of bias in design and execution such that reliable conclusions cannot be drawn from the study).Considering the fourteen Category 1 and 2 studies together: (1) four of the nine that tested a family intervention against a control group had significant positive effects, but one showed significant negative effects; (2) one of the five RCTs that tested a family intervention against a school intervention had significant positive effects; (3) none of the six that compared the incremental effects of a family plus a school programme to a school programme alone had significant positive effects; (4) the one RCT that tested a family tobacco intervention against a family non-tobacco safety intervention showed no effects; and (5) the one trial that used general risk reduction interventions found the group which received the parent and teen interventions had less smoking than the one that received only the teen intervention (there was no tobacco intervention but tobacco outcomes were measured). For the included trials the amount of implementer training and the fidelity of implementation are related to positive outcomes, but the number of sessions is not. AUTHORS' CONCLUSIONS: Some well-executed RCTs show family interventions may prevent adolescent smoking, but RCTs which were less well executed had mostly neutral or negative results. There is thus a need for well-designed and executed RCTs in this area.

Intercultural competence in engineering education : who are we teaching?

BACKGROUND There is little doubt that our engineering graduates’ ability to identify cultural differences and their potential to impact on engineering projects, and to work effectively with these differences is of key importance in the modern engineering practice. Within engineering degree programs themselves there is also a significant need to recognise the impact of changing student and staff profiles on what happens in the classroom. The research described in this paper forms part of a larger project exploring issues of intercultural competence in engineering. PURPOSE This paper presents an observational and survey study of undergraduate and postgraduate engineering students from four institutions working in groups on tasks with a purely technical focus, or with a cultural and humanitarian element. The study sought to explore how students rate their own intercultural competence and team process and whether any differences exist depending on the nature of the task they are working on. We also investigated whether any differences were evident between groups of first year, second year and postgraduate students. DESIGN/METHOD The study used the miniCQS instrument (Ang & Van Dyne, 2008) and a Bales Interaction Process Analysis based scale (Bales, 1950; Carney, 1976) to collect students self ratings of group process, task management, and cultural experience and behaviour. The Bales IPA was also used for coding video observations of students working in groups. Survey data were used to form descriptive variables to compare outcomes across the different tasks and contexts. Observations analysed in Nvivo were used to provide commentary and additional detail on the quantitative data. RESULTS The results of the survey indicated consistent mean scores on each survey item for each group of students, despite vastly different tasks, student backgrounds and educational contexts. Some small, statistically significant mean differences existed, offering some basic insights into how task and student group composition could affect self ratings. Overall though, the results suggest minimal shift in how students view group function and their intercultural experience, irrespective of differing educational experience. CONCLUSIONS The survey results, contrasted with group observations, indicate that either students are not translating their experience (in the group tasks) into critical self assessment of their cultural competence and teamwork, or that they become more critical of team performance and cultural competence as their competence in these areas grows, so their ratings remain consistent. Both outcomes indicate that students need more intensive guidance to build their critical self and peer assessment skills in these areas irrespective of their year level of study.

Adapting wheat sowing dates to projected climate change in the Australian subtropics: analysis of crop water use and yield

Projected increases in atmospheric carbon dioxide concentration ([CO2]) and air temperature associated with future climate change are expected to affect crop development, crop yield, and, consequently, global food supplies. They are also likely to change agricultural production practices, especially those related to agricultural water management and sowing date. The magnitude of these changes and their implications to local production systems are mostly unknown. The objectives of this study were to: (i) simulate the effect of projected climate change on spring wheat (Triticum aestivum L. cv. Lang) yield and water use for the subtropical environment of the Darling Downs, Queensland, Australia; and (ii) investigate the impact of changing sowing date, as an adaptation strategy to future climate change scenarios, on wheat yield and water use. The multimodel climate projections from the IPCC Coupled Model Intercomparison Project (CMIP3) for the period 2030–2070 were used in this study. Climate scenarios included combinations of four changes in air temperature (08C, 18C, 28C, and 38C), three [CO2] levels (380 ppm, 500 ppm, and 600 ppm), and three changes in rainfall (–30%, 0%, and +20%), which were superimposed on observed station data. Crop management scenarios included a combination of six sowing dates (1 May, 10 May, 20 May, 1 June, 10 June, and 20 June) and three irrigation regimes (no irrigation (NI), deficit irrigation (DI), and full irrigation (FI)). Simulations were performed with the model DSSAT4.5, using 50 years of daily weather data.Wefound that: (1) grain yield and water-use efficiency (yield/evapotranspiration) increased linearly with [CO2]; (2) increases in [CO2] had minimal impact on evapotranspiration; (3) yield increased with increasing temperature for the irrigated scenarios (DI and FI), but decreased for the NI scenario; (4) yield increased with earlier sowing dates; and (5) changes in rainfall had a small impact on yield for DI and FI, but a high impact for the NI scenario.

Social cognitive mediators of the effect of the MobileMums intervention on physical activity

Objective To explore whether improvements in physical activity following the MobileMums intervention were mediated by changes in Social Cognitive Theory (SCT) constructs targeted in the intervention (barrier self efficacy, goal setting skills, outcome expectancy, social support, and perceived environmental opportunity for exercise). This paper also examined if the mediating constructs differed between initial (baseline to 6 weeks) and overall (baseline to 13 weeks) changes in physical activity. Methods Secondary analysis of data from a randomized controlled trial involving 88 postnatal women (<12 months postpartum). Participants were randomized to receive either the 12-week MobileMums intervention or a minimal-contact control condition. Physical activity and proposed mediators were assessed by self-report at baseline, 6 weeks, and 13 weeks. Walking for Exercise frequency was assessed using the Australian Women's Activity Survey and frequency of moderate-to-vigorous physical activity (MVPA) was assessed using a single-item question. Results Initial improvements in goal-setting skills mediated the relationship between experimental condition and initial changes in MVPA, αβ (95% CI) = 0.23(0.01, 0.59), and Walking for Exercise, αβ (95% CI) = 0.34(0.06, 0.73). Initial improvements in barrier self efficacy mediated the relationship between experimental condition and initial change in MVPA, αβ (95% CI) = 0.36(0.12, 0.65), but not Walking for Exercise. None of the SCT outcomes significantly mediated the relationship between experimental condition and overall (baseline to 13 weeks) change in frequency of MVPA or Walking for Exercise. Conclusion Future interventions with postnatal women using SCT should target barrier self-efficacy and goal setting skills in order to increase physical activity. (PsycINFO Database Record (c) 2012 APA, all rights reserved)

Ideal victims in human trafficking awareness campaigns

Amidst a proliferation of bestseller books, blockbuster films, television documentaries and sensational news reports, public awareness campaigns have claimed their place in a growing chorus of concern about the crime of human trafficking. These campaigns aim to capture the public’s support in efforts to eliminate a ‘modern slave trade’ in which individuals seeking a better life are transported across borders and forced into exploitative labour conditions. Constrained by the limitations of primary campaign materials (posters, print ads, billboards) typically allowing for only a single image and minimal text, it is unlikely that these awareness campaigns can accurately convey the complexity of the trafficking problem. This chapter explores how the depictions of trafficking victims in awareness campaigns can exclude those who do not fit a restrictive narrative mould. Nils Christie’s pivotal work on the construction of society’s ideal victim is the lens through which this paper examines the literal ‘poster child’ of the anti-trafficking movement.

Intra-amniotic ureaplasma infection : adverse outcomes vary depending on gestation

Background: Ureaplasmas are the most prevalent bacteria isolated from preterm deliveries and the prognosis for neonates varies depending on the gestation at delivery. Ureaplasmas vary their surface-exposed antigen (MBA, a virulence mechanism) during chronic intra-amniotic infections, but it is not known when changes first occur during gestation. Method: U. parvum serovar 3 (2x10e7CFU) was injected intra-amniotically (IA) into six experimental cohorts of pregnant ewes (of n=7), 3 days (d) or 7d before delivery at either: 100d, 124d or 140d gestation (term=145d). Control ewes received IA 10B broth. Fetuses were delivered surgically and ureaplasmas cultured from amniotic fluid (AF), chorioamnion, fetal lung (FL) and umbilical cord. Ureaplasmas were tested by western blot to demonstrate MBA variation. Results: The highest number of ureaplasmas were recovered from FL at 100d gestation after 3 days of infection (p<0.03). Six of 7(86%) 100d–3d FL demonstrated an ureaplasma MBA variant, but only 17% and 15% of FL showed an MBA variant after 3d infection at 124d and 140d gestation respectively. Greatest variation of the MBA occurred in AF and FL at 124d gestation after 7d infection. The least MBA variation was observed at 140d; however, at this time the most severe histological chorioamnionitis was observed. Conclusions: After intra-amniotic ureaplasma injections, higher numbers of ureaplasmas gained access to the FL at 100d gestation than observed at later gestations. This may exacerbate the adverse outcomes for neonates delivered early in gestation. In late gestation, ureaplasma MBA variation was minimal, but chorioamnionitis was the most severe. Adverse pregnancy outcomes associated with IA ureaplasma infection may vary depending on the duration of gestation, the number of ureaplasmas isolated from the fetal tissues and the degree of MBA variation.

Shut up & write!

This case-study exemplifies a ‘writing movement’, which is currently occurring in various parts of Australia through the support of social media. A concept emerging from the café scene in San Francisco, ‘Shut Up and Write!’ is a meetup group that brings writers together at a specific time and place to write side by side, thus making writing practice, social. This concept has been applied to the academic environment and our case-study explores the positive outcomes in two locations: RMIT University and QUT. We believe that this informal learning practice can be implemented to assist research students in developing academic skills. DESCRIPTION: Please describe your practice as a case study, including its context; challenge addressed; its aims; what it is; and how it supports creative practice PhD students or supervisors. Additional information may include: the outcomes; key factors or principles that contribute to its effectiveness; anticipated impact/evidence of impact. Research students spend the majority of their time outside of formal learning environments. Doctoral candidates enter their degree with a range of experience, knowledge and needs, making it difficult to provide writing assistance in a structured manner. Using a less structured approach to provide writing assistance has been trialled with promising results (Boud, Cohen, & Sampson, 2001; Stracke, 2010; Devenish et al, 2009). Although, semi structured approaches have been developed and examined, informal learning opportunities have received minimal attention. The primary difference of Shut Up and Write! to other writing practices, is that individuals do not engage in any structured activity and they do not share the outcomes of the writing. The purpose of Shut Up and Write! is to transform writing practice from a solitary experience, to a social one. Shut Up and Write! typically takes place outside of formal learning environments, in public spaces such as a café. The structure of Shut Up and Write! sessions is simple: participants meet at a specific time and place, chat for a few minutes, then they Shut Up and Write for a predetermined amount of time. Critical to the success of the sessions, is that there is no critiquing of the writing, and there is no competition or formal exercises. Our case-study examines the experience of two meetup groups at RMIT University and QUT through narrative accounts from participants. These accounts reveal that participants have learned: • Writing/productivity techniques; • Social/cloud software; • Aspects of the PhD; and • ‘Mundane’ dimensions of academic practice. In addition to this, activities such as Shut Up and Write! promote peer to peer bonding, knowledge exchange, and informal learning within the higher degree research experience. This case-study extends the initial work presented by the authors in collaboration with Dr. Inger Mewburn at QPR2012 – Quality in Postgraduate Research Conference, 2012.

Shut up & write! Facilitating informal learning in doctoral education

Providing help for research degree writing within a formal structure is difficult because research students come into their degree with widely varying needs and levels of experience. Providing writing assistance within a less structured learning context is an approach which has been trialled in higher education with promising results (Boud, Cohen & Sampson, 2001; Stracke, 2010; Devendish et al., 2009). While semi structured approaches have been the subject of study, little attention has been paid to the processes of informal learning which exist within doctoral education. In this paper we explore a 'writing movement' which has started to be taken up at various locations in Australia through the auspices of social media (Twitter and Facebook). 'Shut up and Write' is a concept first used in the cafe scene in San Francisco, where writers converge at a specific time and place and write together, without showing each other the outcomes, temporarily transforming writing from a solitary practice to a social one. In this paper we compare the experience of facilitating shut up and write sessions in two locations: RMIT University and Queensland University of Technology. The authors describe the set up and functioning of the different groups and report on feedback from regular participants, both physical and virtual. We suggest that informal learning practices can be exploited to assist research students to orientate themselves to the university environment and share vital technical skills, with very minimal input from academic staff. This experience suggests there is untapped potential within these kinds of activities to promote learning within the research degree experience which is sustainable and builds a stronger sense of community.

Tracking new directions in the evaluation of postgraduate supervision

This article focuses on the evaluation of thesis supervision and highlights the vast range of problem areas presently documented as significant areas of concern for both graduate students and their supervisors. Additionally, the authors report on a study completed in 1995, which surveyed all Australian universities about current evaluative practices in postgraduate supervision. The conclusion of this study was that the conduct of such evaluations appears to be minimal and is primarily designed to obtain an indicator of the general “health” of a university's postgraduate supervision rather than to foster improved supervisory practices. As part of the same study, the authors conducted University faculty-based student and supervisor focus groups. Key issues emerging from these focus groups were: (1) the importance of relational aspects of supervision as the student communicates over the long term with one or more supervisors; (2) the importance of systematic feedback, monitoring, and evaluation to the supervisory process; and (3) the lack of strategies to facilitate this evaluative feedback process. On the basis of these findings, the authors designed evaluative strategies to facilitate regular ongoing feedback between students and supervisors.

Value management in infrastructure project design : unlocking the project team’s creativity

Value Management (VM) is a proven methodology that provides a structured framework using supporting tools and techniques that facilitate effective decision-making in many types of projects, thus achieving ‘best value’ for clients. It offers an exceptionally robust approach to exploring the need and function of projects to be aligned with client’s objectives. The functional analysis and creativity phases of VM are crucial as it focused on utilising innovative thinking to understand the objectives of clients’ projects and provide value-adding solutions at the early discovery stages of projects. There is however a perception of VM as just being another cost-cutting tool, which has overshadowed the fundamental benefits of the method, therefore negating both influence and wider use in the construction industry. This paper describes findings from a series of case studies conducted at project and corporate levels of a current public funded infrastructure projects in Malaysia. The study aims to investigate VM processes practised by the project client organisation and evaluate the effects of project team involvement in VM workshops during the design-stage of these projects. The focus of the study is on how issues related to ‘upstream’ infrastructure design aimed at improving ‘downstream’ construction process on-site, are being resolved through multi-disciplinary team consideration and decision-making. Findings from the case studies indicate that the mix of disciplines of project team members at a design-stage of a VM workshop has minimal influence on improving construction processes. However, the degree of interaction, institutionalized thinking, cultural dimensions and visualization aids adopted, have a significant impact in maximizing creativity amongst project team members during VM workshop. The case studies conducted for this research have focused on infrastructure projects that utilise traditional VM workshop as client’s chosen VM methodology to review and develop designs. Documents review and semi-structured interview with project teams are used as data collection techniques for the case study. The significant outcomes of this research are expected to offer alternative perspectives for construction professionals and clients to minimise the constraints and strengthen strategies for implementing VM on future projects.

Towards persistent indoor appearance-based localization, mapping and navigation using CAT-Graph

The challenge of persistent appearance-based navigation and mapping is to develop an autonomous robotic vision system that can simultaneously localize, map and navigate over the lifetime of the robot. However, the computation time and memory requirements of current appearance-based methods typically scale not only with the size of the environment but also with the operation time of the platform; also, repeated revisits to locations will develop multiple competing representations which reduce recall performance. In this paper we present a solution to the persistent localization, mapping and global path planning problem in the context of a delivery robot in an office environment over a one-week period. Using a graphical appearance-based SLAM algorithm, CAT-Graph, we demonstrate constant time and memory loop closure detection with minimal degradation during repeated revisits to locations, along with topological path planning that improves over time without using a global metric representation. We compare the localization performance of CAT-Graph to openFABMAP, an appearance-only SLAM algorithm, and the path planning performance to occupancy-grid based metric SLAM. We discuss the limitations of the algorithm with regard to environment change over time and illustrate how the topological graph representation can be coupled with local movement behaviors for persistent autonomous robot navigation.

Cryo-electron tomography of Marburg Virus particles and their morphogenesis within infected cells

Several major human pathogens, including the filoviruses, paramyxoviruses, and rhabdoviruses, package their single-stranded RNA genomes within helical nucleocapsids, which bud through the plasma membrane of the infected cell to release enveloped virions. The virions are often heterogeneous in shape, which makes it difficult to study their structure and assembly mechanisms. We have applied cryo-electron tomography and sub-tomogram averaging methods to derive structures of Marburg virus, a highly pathogenic filovirus, both after release and during assembly within infected cells. The data demonstrate the potential of cryo-electron tomography methods to derive detailed structural information for intermediate steps in biological pathways within intact cells. We describe the location and arrangement of the viral proteins within the virion. We show that the N-terminal domain of the nucleoprotein contains the minimal assembly determinants for a helical nucleocapsid with variable number of proteins per turn. Lobes protruding from alternate interfaces between each nucleoprotein are formed by the C-terminal domain of the nucleoprotein, together with viral proteins VP24 and VP35. Each nucleoprotein packages six RNA bases. The nucleocapsid interacts in an unusual, flexible "Velcro-like" manner with the viral matrix protein VP40. Determination of the structures of assembly intermediates showed that the nucleocapsid has a defined orientation during transport and budding. Together the data show striking architectural homology between the nucleocapsid helix of rhabdoviruses and filoviruses, but unexpected, fundamental differences in the mechanisms by which the nucleocapsids are then assembled together with matrix proteins and initiate membrane envelopment to release infectious virions, suggesting that the viruses have evolved different solutions to these conserved assembly steps.

A conceptual model for reflecting on expected learning vs. demonstrated student performance

Educators are faced with many challenging questions in designing an effective curriculum. What prerequisite knowledge do students have before commencing a new subject? At what level of mastery? What is the spread of capabilities between bare-passing students vs. the top performing group? How does the intended learning specification compare to student performance at the end of a subject? In this paper we present a conceptual model that helps in answering some of these questions. It has the following main capabilities: capturing the learning specification in terms of syllabus topics and outcomes; capturing mastery levels to model progression; capturing the minimal vs. aspirational learning design; capturing confidence and reliability metrics for each of these mappings; and finally, comparing and reflecting on the learning specification against actual student performance. We present a web-based implementation of the model, and validate it by mapping the final exams from four programming subjects against the ACM/IEEE CS2013 topics and outcomes, using Bloom's Taxonomy as the mastery scale. We then import the itemised exam grades from 632 students across the four subjects and compare the demonstrated student performance against the expected learning for each of these. Key contributions of this work are the validated conceptual model for capturing and comparing expected learning vs. demonstrated performance, and a web-based implementation of this model, which is made freely available online as a community resource.