Structure and palaeoenvironmental implications of inter-branch coenosteum-rich skeleton in corymbose Acropora species

Coral reefs provide an increasingly important archive of palaeoclimate data that can be used to constrain climate model simulations. Reconstructing past environmental conditions may also provide insights into the potential of reef systems to survive changes in the Earth’s climate. Reef-based palaeoclimate reconstructions are predominately derived from colonies of massive Porites, with the most abundant genus in the Indo-Pacific—Acropora—receiving little attention owing to their branching growth trajectories, high extension rates and secondary skeletal thickening. However, inter-branch skeleton (consisting of both coenosteum and corallites) near the bases of corymbose Acropora colonies holds significant potential as a climate archive. This region of Acropora skeleton is atypical, having simple growth trajectories with parallel corallites, approximately horizontal density banding, low apparent extension rates and a simple microstructure with limited secondary thickening. Hence, inter-branch skeleton in Acropora bears more similarities to the coralla of massive corals, such as Porites, than to traditional Acropora branches. Cyclic patterns of Sr/Ca ratios in this structure suggest that the observed density banding is annual in nature, thus opening up the potential to use abundant corymbose Acropora for palaeoclimate reconstruction.

Australian horror movies and the American market

In Australian cinema since the mid-2000s, horror has become a popular and at times commercially viable genre for low-budget and emerging filmmakers targeting international markets. While the annual horror film output of Australia pales in comparison to that of other Anglophone nations like the United States, Great Britain, and Canada, it has produced several significant titles that have performed moderately well at the international box office, from Wolf Creek (Greg McLean, 2005) to Daybreakers (Michael and Peter Spierig, 2009). Yet as part of a broader tradition of Anglophone horror cinema, many Australian horror movies have been heavily influenced by US and to a lesser extent British horror films. Furthermore, Australian horror film production is largely an internationally-oriented sector that relies on its relationships with overseas distributors and often investors. Consequently, the content and style of Australian horror movies have regularly been tailored for international markets. As a direct consequence some filmmakers have sought to trade on the “Australianness” of their product, others have attempted to pass off their films as faux-American, while others still have attempted to develop placeless films effaced of national reference points. This chapter examines local production as part of a broader tradition of Anglophone horror cinema, the influence of US horror movies, and the limitations of the domestic marketplace. The article concludes with an analysis of how the lure of the US market influences Australian filmmakers’ textual strategies.

Visual field coordinates of pupillary circular axis and optical axis

Purpose: We term the visual field position from which the pupil appears most nearly circular as the pupillary circular axis (PCAx). The aim was to determine and compare the horizontal and vertical co-ordinates of the PCAx and optical axis from pupil shape and refraction information for only the horizontal meridian of the visual field. Method: The PCAx was determined from the changes with visual field angle in the ellipticity and orientation of pupil images out to ±90° from fixation along the horizontal meridian for the right eyes of 30 people. This axis was compared with the optical axis determined from the changes in the astigmatic components of the refractions for field angles out to ±35° in the same meridian. Results: The mean estimated horizontal and vertical field coordinates of the PCAx were (‒5.3±1.9°, ‒3.2±1.5°) compared with (‒4.8±5.1°, ‒1.5±3.4°) for the optical axis. The vertical co-ordinates of the two axes were just significantly different (p =0.03) but there was no significant correlation between them. Only the horizontal coordinate of the PCAx was significantly related to the refraction in the group. Conclusion: On average, the PCAx is displaced from the line-of-sight by about the same angle as the optical axis but there is more inter-subject variation in the position of the optical axis. When modelling the optical performance of the eye, it appears reasonable to assume that the pupil is circular when viewed along the line-of-sight.

The biology of an isolated population of American Flamingo Phoenicopterus ruber in the Galapagos Islands

A genetically and morphologically divergent population of c.500 American Flamingos, isolated from the parental Caribbean stock of Phoenicopterus ruber, occurs in the Galapagos archipelago. Based primarily on data from a 3-year study, we provide the first description of the feeding and breeding biology of this population. Galapagos provides a suitable habitat comprising lagoons on a number of islands, among which the flamingos travel in response to food and nest site availability. The occurrence and qualnity of some food species was associated with the chlorosity of lagoon water, as was the distribution of flamingos. They bred opportunistically at five lagoons on four islands, sometimes simultaneously on more than one island. Group display usually involved approx 20 birds and colonies contained as few as three nests. Laying occurred during nine months of the year... We review potential dangers to this unique population and suggest conservation measures.

Vocalizations of the North Island Brown Kiwi (Apteryx mantelli)

Few studies have investigated the vocal communication of ratites, and none has investigated the spectral and temporal structure of vocalizations of Apteryx, the only extant ratite genus in New Zealand. We describe the long-range vocalization (whistle call) and vocal behavior of male and female North Island Brown Kiwi (Apteryx mantelli). Spontaneous calling by seven pairs was recorded in the field over a one-year period. Call notes produced by males were tonal in nature; the fundamental frequency was ~1.5 kHz, with overtones reaching up to ~13.0 kHz. Call notes produced by females contained a series of tightly packed, poorly defined harmonics and consisted of a fundamental frequency of ~0.1 kHz, with overtones reaching ~7.0 kHz. The amplitude within notes of females was concentrated into two prominent formants. Some individuals of pairs exhibited duetting behavior that resulted in alteration of the inter-note interval after the onset of the call of their mate. Our findings draw attention to the uniqueness of the North Island Brown Kiwi's vocalizations, and we uncovered some unexpected structural features that call for further investigation.

Three-dimensional geological modelling of the Galilee and central Eromanga basins, Australia: New insights into aquifer/aquitard geometry and potential influence of faults on inter-connectivity

Study region The Galilee and Eromanga basins are located in central Queensland, Australia. Both basins are components of the Great Artesian Basin which host some of the most significant groundwater resources in Australia. Study focus This study evaluates the influence of regional faults on groundwater flow in an aquifer/aquitard interbedded succession that form one of the largest Artesian Basins in the world. In order to assess the significance of regional faults as potential barriers or conduits to groundwater flow, vertical displacements of the major aquifers and aquitards were studied at each major fault and the general hydraulic relationship of units that are juxtaposed by the faults were considered. A three-dimensional (3D) geological model of the Galilee and Eromanga basins was developed based on integration of well log data, seismic surfaces, surface geology and elevation data. Geological structures were mapped in detail and major faults were characterised. New hydrological insights for the region Major faults that have been described in previous studies have been confirmed within the 3D geological model domain and a preliminary assessment of their hydraulic significance has been conducted. Previously unknown faults such as the Thomson River Fault (herein named) have also been identified in this study.

Methodology to predict the safety performance of rural multilane highways [Final Report for NCHRP Project 17-29]

The objective of this research is to develop a methodology that predicts the safety performance of various elements considered in the planning, design, and operation of nonlimited- access rural multilane highways.

Inter-cycle variability of ignition delay in an ethanol fumigated common rail diesel engine

An experimental study has been performed to investigate the ignition delay of a modern heavy-duty common-rail diesel engine run with fumigated ethanol substitutions up to 40% on an energy basis. The ignition delay was determined through the use of statistical modelling in a Bayesian framework this framework allows for the accurate determination of the start of combustion from single consecutive cycles and does not require any differentiation of the in-cylinder pressure signal. At full load the ignition delay has been shown to decrease with increasing ethanol substitutions and evidence of combustion with high ethanol substitutions prior to diesel injection have also been shown experimentally and by modelling. Whereas, at half load increasing ethanol substitutions have increased the ignition delay. A threshold absolute air to fuel ratio (mole basis) of above ~110 for consistent operation has been determined from the inter-cycle variability of the ignition delay, a result that agrees well with previous research of other in-cylinder parameters and further highlights the correlation between the air to fuel ratio and inter-cycle variability. Numerical modelling to investigate the sensitivity of ethanol combustion has also been performed. It has been shown that ethanol combustion is sensitive to the initial air temperature around the feasible operating conditions of the engine. Moreover, a negative temperature coefficient region of approximately 900{1050 K (the approximate temperature at fuel injection) has been shown with for n-heptane and n-heptane/ethanol blends in the numerical modelling. A consequence of this is that the dominate effect influencing the ignition delay under increasing ethanol substitutions may rather be from an increase in chemical reactions and not from in-cylinder temperature. Further investigation revealed that the chemical reactions at low ethanol substitutions are different compared to the high (> 20%) ethanol substitutions.

Double star chopper cell converter for battery electric vehicles with inter-module SoC balancing and fault tolerant control

A modularized battery system with Double Star Chopper Cell (DSCC) based modular multilevel converter is proposed for a battery operated electric vehicle (EV). A design concept for the modularized battery micro-packs for DSCC is described. Multidimensional pulse width modulation (MD-PWM) with integrated inter-module SoC balancing and fault tolerant control is proposed and explained. The DSCC can be operated either as an inverter to drive the EV motor or as a synchronous rectifier connected to external three phase power supply equipment for charging the battery micro-packs. The methods of operation as inverter and synchronous rectifier with integrated inter-module SoC balancing and fault tolerant control are discussed. The proposed system operation as inverter and synchronous rectifier are verified through simulations and the results are presented.

The on-road experiences and awareness of sleepiness in a sample of Australian highway drivers: A roadside driver sleepiness study

Objective Driver sleepiness contributes substantially to road crash incidents. Simulator and on-road studies clearly reveal an impairing effect from sleepiness on driving ability. However, the degree to which drivers appreciate the dangerousness of driving while sleepy is somewhat unclear. This study sought to determine drivers’ on-road experiences of sleepiness, their prior sleep habits, and personal awareness of the signs of sleepiness. Methods Participants were a random selection of 92 drivers travelling on a major highway in the state of Queensland, Australia, who were stopped by police as part of routine drink driving operations. Participants completed a brief questionnaire that included demographic information, sleepy driving experiences (signs of sleepiness and on-road experiences of sleepiness), and prior sleep habits. A modified version of the Karolinska Sleepiness Scale (KSS) was used to assess subjective sleepiness in the 15 minutes prior to being stopped by police. Results Participants rating of subjective sleepiness were quite low, with 90% reporting being alert to extremely alert on the KSS. Participants were reasonably aware of the signs of sleepiness, with many signs of sleepiness associated with on-road experiences of sleepiness. Additionally, the number of hours spent driving was positively correlated with the drivers’ level of sleep debt. Conclusions The results suggest the participants had moderate experience of driving while sleepy and many were aware of the signs of sleepiness. The relationship between driving long distances and increased sleep debt is a concern for road safety – increased education regarding the dangers of sleepy driving seems warranted.

Large-scale interlaboratory study to develop, analytically validate and apply highly multiplexed, quantitative peptide assays to measure cancer-relevant proteins in plasma

There is an increasing need in biology and clinical medicine to robustly and reliably measure tens-to-hundreds of peptides and proteins in clinical and biological samples with high sensitivity, specificity, reproducibility and repeatability. Previously, we demonstrated that LC-MRM-MS with isotope dilution has suitable performance for quantitative measurements of small numbers of relatively abundant proteins in human plasma, and that the resulting assays can be transferred across laboratories while maintaining high reproducibility and quantitative precision. Here we significantly extend that earlier work, demonstrating that 11 laboratories using 14 LC-MS systems can develop, determine analytical figures of merit, and apply highly multiplexed MRM-MS assays targeting 125 peptides derived from 27 cancer-relevant proteins and 7 control proteins to precisely and reproducibly measure the analytes in human plasma. To ensure consistent generation of high quality data we incorporated a system suitability protocol (SSP) into our experimental design. The SSP enabled real-time monitoring of LC-MRM-MS performance during assay development and implementation, facilitating early detection and correction of chromatographic and instrumental problems. Low to sub-nanogram/mL sensitivity for proteins in plasma was achieved by one-step immunoaffinity depletion of 14 abundant plasma proteins prior to analysis. Median intra- and inter-laboratory reproducibility was <20%, sufficient for most biological studies and candidate protein biomarker verification. Digestion recovery of peptides was assessed and quantitative accuracy improved using heavy isotope labeled versions of the proteins as internal standards. Using the highly multiplexed assay, participating laboratories were able to precisely and reproducibly determine the levels of a series of analytes in blinded samples used to simulate an inter-laboratory clinical study of patient samples. Our study further establishes that LC-MRM-MS using stable isotope dilution, with appropriate attention to analytical validation and appropriate quality c`ontrol measures, enables sensitive, specific, reproducible and quantitative measurements of proteins and peptides in complex biological matrices such as plasma.

Improving out-domain PLDA speaker verification using unsupervised inter-dataset variability compensation approach

Experimental studies have found that when the state-of-the-art probabilistic linear discriminant analysis (PLDA) speaker verification systems are trained using out-domain data, it significantly affects speaker verification performance due to the mismatch between development data and evaluation data. To overcome this problem we propose a novel unsupervised inter dataset variability (IDV) compensation approach to compensate the dataset mismatch. IDV-compensated PLDA system achieves over 10% relative improvement in EER values over out-domain PLDA system by effectively compensating the mismatch between in-domain and out-domain data.

Wide-area damping control for inter-area oscillations using inverse filtering technique

In this study, a non-linear excitation controller using inverse filtering is proposed to damp inter-area oscillations. The proposed controller is based on determining generator flux value for the next sampling time which is obtained by maximising reduction rate of kinetic energy of the system after the fault. The desired flux for the next time interval is obtained using wide-area measurements and the equivalent area rotor angles and velocities are predicted using a non-linear Kalman filter. A supplementary control input for the excitation system, using inverse filtering approach, to track the desired flux is implemented. The inverse filtering approach ensures that the non-linearity introduced because of saturation is well compensated. The efficacy of the proposed controller with and without communication time delay is evaluated on different IEEE benchmark systems including Kundur's two area, Western System Coordinating Council three-area and 16-machine, 68-bus test systems.