Probing the effect of charge transfer enhancement in off resonance mode SERS via conjugation of the probe dye between silver nanoparticles and metal substrates

The charge transfer-mediated surface enhanced Raman scattering (SERS) of crystal violet (CV) molecules that were chemically conjugated between partially polarized silver nanoparticles and optically smooth gold and silver substrates has been studied under off-resonant conditions. Tyrosine molecules were used as a reducing agent to convert silver ions into silver nanoparticles where oxidised tyrosine caps the silver nanoparticle surface with its semiquinone group. This binding through the quinone group facilitates charge transfer and results in partially oxidised silver. This establishes a chemical link between the silver nanoparticles and the CV molecules, where the positively charged central carbon of CV molecules can bind to the terminal carboxylate anion of the oxidised tyrosine molecules. After drop casting Ag nanoparticles bound with CV molecules it was found that the free terminal amine groups tend to bind with the underlying substrates. Significantly, only those CV molecules that were chemically conjugated between the partially polarised silver nanoparticles and the underlying gold or silver substrates were found to show SERS under off-resonant conditions. The importance of partial charge transfer at the nanoparticle/capping agent interface and the resultant conjugation of CV molecules to off resonant SERS effects was confirmed by using gold nanoparticles prepared in a similar manner. In this case the capping agent binds to the nanoparticle through the amine group which does not facilitate charge transfer from the gold nanoparticle and under these conditions SERS enhancement in the sandwich configuration was not observed.

Writing the oriental woman : an examination of the representation of Japanese women in contemporary Australian crime fiction

This study considers the challenges in representing women from other cultures in the crime fiction genre. The study is presented in two parts; an exegesis and a creative practice component consisting of a full length crime fiction novel, Batafurai. The exegesis examines the historical period of a section of the novel—post-war Japan—and how the area of research known as Occupation Studies provides an insight into the conditions of women during this period. The exegesis also examines selected postcolonial theory and its exposition of representations of the 'other' as a western construct designed to serve Eurocentric ends. The genre of crime fiction is reviewed, also, to determine how characters purportedly representing Oriental cultures are constricted by established stereotypes. Two case studies are examined to investigate whether these stereotypes are still apparent in contemporary Australian crime fiction. Finally, I discuss my own novel, Batafurai, to review how I represented people of Asian background, and whether my attempts to resist stereotype were successful. My conclusion illustrates how novels written in the crime fiction genre are reliant on strategies that are action-focused, rather than character-based, and thus often use easily recognizable types to quickly establish frameworks for their stories. As a sub-set of popular fiction, crime fiction has a tendency to replicate rather than challenge established stereotypes. Where it does challenge stereotypes, it reflects a territory that popular culture has already visited, such as the 'female', 'black' or 'gay' detective. Crime fiction also has, as one of its central concerns, an interest in examining and reinforcing the notion of societal order. It repeatedly demonstrates that crime either does not pay or should not pay. One of the ways it does this is to contrast what is 'good', known and understood with what is 'bad', unknown, foreign or beyond our normal comprehension. In western culture, the east has traditionally been employed as the site of difference, and has been constantly used as a setting of contrast, excitement or fear. Crime fiction conforms to this pattern, using the east to add a richness and depth to what otherwise might become a 'dry' tale. However, when used in such a way, what is variously eastern, 'other' or Oriental can never be paramount, always falling to secondary side of the binary opposites (good/evil, known/unknown, redeemed/doomed) at work. In an age of globalisation, the challenge for contemporary writers of popular fiction is to be responsive to an audience that demands respect for all cultures. Writers must demonstrate that they are sensitive to such concerns and can skillfully manage the tensions caused by the need to deliver work that operates within the parameters of the genre, and the desire to avoid offence to any cultural or ethnic group. In my work, my strategy to manage these tensions has been to create a back-story for my characters of Asian background, developing them above mere genre types, and to situate them with credibility in time and place through appropriate historical research.

A process-oriented approach to supporting Off-site Manufacture in construction projects

It is well-known that the use of off-site manufacture (OSM) techniques can assist in timely completion of a construction project though the utilisation of such techniques may have other disadvantages. Currently, OSM uptake within the Australian construction industry is limited. To successfully incorporate OSM practices within a construction project, it is crucial to understand the impact of OSM adoption on the processes used during a construction project. This paper presents how a systematic process-oriented approach may be able to support OSM utilisation within a construction project. Process modelling, analysis and automation techniques which are well-known within the Business Process Management (BPM) discipline have been applied to develop a collection of construction process models that represent the end-to-end generic construction value chain. The construction value chain enables researchers to identify key activities, resources, data, and stakeholders involved in construction processes in each defined construction phase. The collection of construction process models is then used as a basis for identification of potential OSM intervention points in collaboration with domain experts from the Australian construction industry. This ensures that the resulting changes reflect the needs of various stakeholders within the construction industry and have relevance in practice. Based on the input from the domain experts, these process models are further refined and operational requirements are taken into account to develop a prototype process automation (workflow) system that can support and coordinate OSM-related process activities. The resulting workflow system also has the potential to integrate with other IT solutions used within the construction industry (e.g., BIM, Acconex). As such, the paper illustrates the role that process-oriented thinking can play in assisting OSM adoption within the industry.

Association between maternal depressive symptoms in the early postnatal period and responsiveness in feeding at child age 2 years

Maternal depression is a known risk factor for poor outcomes for children. Pathways to these poor outcomes relate to reduced maternal responsiveness or sensitivity to the child. Impaired responsiveness potentially impacts the feeding relationship and thus may be a risk factor for inappropriate feeding practices. The aim of this study was to examine the longitudinal relationships between self-reported maternal post-natal depressive symptoms at child age 4 months and feeding practices at child age 2 years in a community sample. Participants were Australian first-time mothers allocated to the control group of the NOURISH randomized controlled trial when infants were 4 months old. Complete data from 211 mothers (of 346 allocated) followed up when their children were 2 years of age (51% girls) were available for analysis. The relationship between Edinburgh Postnatal Depression Scale (EPDS) score (child age 4 months) and child feeding practices (child age 2 years) was tested using hierarchical linear regression analysis adjusted for maternal and child characteristics. Higher EPDS score was associated with less responsive feeding practices at child age 2 years: greater pressure [β = 0.18, 95% confidence interval (CI): 0.04–0.32, P = 0.01], restriction (β = 0.14, 95% CI: 0.001–0.28, P = 0.05), instrumental (β = 0.14, 95% CI: 0.005–0.27, P = 0.04) and emotional (β = 0.15, 95% CI: 0.01–0.29, P = 0.03) feeding practices (ΔR2 values: 0.02–0.03, P < 0.05). This study provides evidence for the proposed link between maternal post-natal depressive symptoms and lower responsiveness in child feeding. These findings suggest that the provision of support to mothers experiencing some levels of depressive symptomatology in the early post-natal period may improve responsiveness in the child feeding relationship.

Development of an evidence-based framework to guide injury prevention interventions for off-road motorcyclists

There is little research on off-road motorcycle and all-terrain vehicle riders though injury levels are high. This thesis identified formal responsibility for monitoring injuries, targeting young male and recreational riders, promotion of family members as models, and controlled and accessible riding locations as ways to increase safety. These recommendations were based on analysis of Queensland hospitalisation records, rider personal reports and survey responses.

Text messaging to support off-campus clinical nursing facilitators : a descriptive survey

Background Managing large student cohorts can be a challenge for university academics, coordinating these units. Bachelor of Nursing programmes have the added challenge of managing multiple groups of students and clinical facilitators whilst completing clinical placement. Clear, time efficient and effective communication between coordinating academics and clinical facilitators is needed to ensure consistency between student and teaching groups and prompt management of emerging issues. Methods This study used a descriptive survey to explore the use of text messaging via a mobile phone, sent from coordinating academics to off-campus clinical facilitators, as an approach to providing direction and support. Results The response rate was 47.8% (n = 22). Correlations were found between the approachability of the coordinating academic and clinical facilitator perception that, a) the coordinating academic understood issues on clinical placement (r = 0.785, p < 0.001), and b) being part of the teaching team (r = 0.768, p < 0.001). Analysis of responses to qualitative questions revealed three themes: connection, approachability and collaboration. Conclusions This study demonstrates that use of regular text messages improves communication between coordinating academics and clinical facilitators. Findings suggest improved connection, approachability and collaboration between the coordinating academic and clinical facilitation staff.

Dry powder inhaler formulations-effect of polymer carrier size on the drug dispersion

Background The size of the carrier influences the aerosolization of drug from a dry powder inhaler (DPI) formulation. Currently, lactose monohydrate particles in a variety of sizes are preferably used in carrier based DPI formulations of various drugs; however, contradictory reports exist regarding the effect of the size of the carrier on the dispersion of drug. In this study we examined the influence of the intrinsic particle size of the polymeric carrier on the aerosolization of a model drug salbutamol sulphate (SS). Methods Four different sizes (20–150 lm) of polymer carriers were fabricated using solvent evaporation technique and the dispersion of SS particles from these carriers was measured by a Twin Stage Impinger (TSI). The size and morphological properties of polymer carriers were by laser diffraction and SEM, respectively. Results The FPF from these carriers was found to be increasing from 5.6% to 21.3% with increasing the carrier size. The FPF was found to be greater (21%) with the highest particle size of the carrier (150 lm). Conclusions The aerosolization of drug was dependent on the size of polymer carriers. The smaller size of the carrier resulted in lower FPF which was increased with increasing the carrier size. For a fixed mass of drug particles in a formulation, the mass of drug particles per unit area of carriers is higher in formulations containing the larger carriers, which leads to an increase in the dispersion of drug due to the increased mechanical forces occurred between the carriers and the device walls.

Effect of chemical conjugation of L-leucine to chitosan on the dispersibility and drug release of a dry powder inhaler nanoparticle formulation

Purpose: This study investigated the effect of chemical conjugation of the amino acid L-leucine to the polysaccharide chitosan on the dispersibility and drug release pattern of a polymeric nanoparticle (NP)-based controlled release dry powder inhaler (DPI) formulation. Methods: A chemical conjugate of L-leucine with chitosan was synthesized and characterized by Infrared (IR) Spectroscopy, Nuclear Magnetic Resonance (NMR) Spectroscopy, Elemental Analysis and X-ray Photoelectron Spectroscopy (XPS). Nanoparticles of both chitosan and its conjugate were prepared by a water-in-oil emulsification – glutaraldehyde cross-linking method using the antihypertensive agent, diltiazem (Dz) hydrochloride as the model drug. The surface morphology and particle size distribution of the nanoparticles were determined by Scanning Electron Microscopy (SEM) and Dynamic Light Scattering (DLS). The dispersibility of the nanoparticle formulation was analysed by a Twin Stage Impinger (TSI) with a Rotahaler as the DPI device. Deposition of the particles in the different stages was determined by gravimetry and the amount of drug released was analysed by UV spectrophotometry. The release profile of the drug was studied in phosphate buffered saline at 37 ⁰C and analyzed by UV spectrophotometry. Results: The TSI study revealed that the fine particle fractions (FPF), as determined gravimetrically, for empty and drug-loaded conjugate nanoparticles were significantly higher than for the corresponding chitosan nanoparticles (24±1.2% and 21±0.7% vs 19±1.2% and 15±1.5% respectively; n=3, p<0.05). The FPF of drug-loaded chitosan and conjugate nanoparticles, in terms of the amount of drug determined spectrophotometrically, had similar values (21±0.7% vs 16±1.6%). After an initial burst, both chitosan and conjugate nanoparticles showed controlled release that lasted about 8 to 10 days, but conjugate nanoparticles showed twice as much total drug release compared to chitosan nanoparticles (~50% vs ~25%). Conjugate nanoparticles also showed significantly higher dug loading and entrapment efficiency than chitosan nanoparticles (conjugate: 20±1% & 46±1%, chitosan: 16±1% & 38±1%, n=3, p<0.05). Conclusion: Although L-leucine conjugation to chitosan increased dispersibility of formulated nanoparticles, the FPF values are still far from optimum. The particles showed a high level of initial burst release (chitosan, 16% and conjugate, 31%) that also will need further optimization.

Do the kinematics of a baulked take-off in springboard diving differ from those of a completed dive

Consistency and invariance in movements are traditionally viewed as essential features of skill acquisition and elite sports performance. This emphasis on the stabilization of action has resulted in important processes of adaptation in movement coordination during performance being overlooked in investigations of elite sport performance. Here we investigate whether differences exist between the movement kinematics displayed by five, elite springboard divers (age 17 ± 2.4 years) in the preparation phases of baulked and completed take-offs. The two-dimensional kinematic characteristics of the reverse somersault take-off phases (approach and hurdle) were recorded during normal training sessions and used for intra-individual analysis. All participants displayed observable differences in movement patterns at key events during the approach phase; however, the presence of similar global topological characteristics suggested that, overall, participants did not perform distinctly different movement patterns during completed and baulked dives. These findings provide a powerful rationale for coaches to consider assessing functional variability or adaptability of motor behaviour as a key criterion of successful performance in sports such as diving.

A Bayesian regression approach to assess uncertainty in pollutant wash-off modelling

Due to knowledge gaps in relation to urban stormwater quality processes, an in-depth understanding of model uncertainty can enhance decision making. Uncertainty in stormwater quality models can originate from a range of sources such as the complexity of urban rainfall-runoff-stormwater pollutant processes and the paucity of observed data. Unfortunately, studies relating to epistemic uncertainty, which arises from the simplification of reality are limited and often deemed mostly unquantifiable. This paper presents a statistical modelling framework for ascertaining epistemic uncertainty associated with pollutant wash-off under a regression modelling paradigm using Ordinary Least Squares Regression (OLSR) and Weighted Least Squares Regression (WLSR) methods with a Bayesian/Gibbs sampling statistical approach. The study results confirmed that WLSR assuming probability distributed data provides more realistic uncertainty estimates of the observed and predicted wash-off values compared to OLSR modelling. It was also noted that the Bayesian/Gibbs sampling approach is superior compared to the most commonly adopted classical statistical and deterministic approaches commonly used in water quality modelling. The study outcomes confirmed that the predication error associated with wash-off replication is relatively higher due to limited data availability. The uncertainty analysis also highlighted the variability of the wash-off modelling coefficient k as a function of complex physical processes, which is primarily influenced by surface characteristics and rainfall intensity.

Time as the critical factor in the investigation of the relationship between pollutant wash-off and rainfall characteristics

The approach adopted for investigating the relationship between rainfall characteristics and pollutant wash-off process is commonly based on the use of parameters which represent the entire rainfall event. This does not permit the investigation of the influence of rainfall characteristics on different sectors of the wash-off process such as first flush where there is a high pollutant wash-off load at the initial stage of the runoff event. This research study analysed the influence of rainfall characteristics on the pollutant wash-off process using two sets of innovative parameters by partitioning wash-off and rainfall characteristics. It was found that the initial 10% of the wash-off process is closely linked to runoff volume related rainfall parameters including rainfall depth and rainfall duration while the remaining part of the wash-off process is primarily influenced by kinetic energy related rainfall parameters, namely, rainfall intensity. These outcomes prove that different sectors of the wash-off process are influenced by different segments of a rainfall event.

IODP Expedition 339 in the Gulf of Cadiz and off West Iberia : decoding the environmental significance of the Mediterranean outflow water and its global influence

IODP Expedition 339 drilled five sites in the Gulf of Cadiz and two off the west Iberian margin (November 2011 to January 2012), and recovered 5.5 km of sediment cores with an average recovery of 86.4%. The Gulf of Cadiz was targeted for drilling as a key location for the investigation of Mediterranean outflow water (MOW) through the Gibraltar Gateway and its influence on global circulation and climate. It is also a prime area for understanding the effects of tectonic activity on evolution of the Gibraltar Gateway and on margin sedimentation. We penetrated into the Miocene at two different sites and established a strong signal of MOW in the sedimentary record of the Gulf of Cadiz, following the opening of the Gibraltar Gateway. Preliminary results show the initiation of contourite deposition at 4.2–4.5 Ma, although subsequent research will establish whether this dates the onset of MOW. The Pliocene succession, penetrated at four sites, shows low bottom current activity linked with a weak MOW. Significant widespread unconformities, present in all sites but with hiatuses of variable duration, are interpreted as a signal of intensified MOW, coupled with flow confinement. The Quaternary succession shows a much more pronounced phase of contourite drift development, with two periods of MOW intensification separated by a widespread unconformity. Following this, the final phase of drift evolution established the contourite depositional system (CDS) architecture we see today. There is a significant climate control on this evolution of MOW and bottom-current activity. However, from the closure of the Atlantic–Mediterranean gateways in Spain and Morocco just over 6 Ma and the opening of the Gibraltar Gateway at 5.3 Ma, there has been an even stronger tectonic control on margin development, downslope sediment transport and contourite drift evolution. The Gulf of Cadiz is the world's premier contourite laboratory and thus presents an ideal testing ground for the contourite paradigm. Further study of these contourites will allow us to resolve outstanding issues related to depositional processes, drift budgets, and recognition of fossil contourites in the ancient record on shore. The expedition also verified an enormous quantity and extensive distribution of contourite sands that are clean and well sorted. These represent a relatively untapped and important exploration target for potential oil and gas reservoirs.

“Creep-out” versus “gross-out” : horror movies at the Australian Box Office

Australia is a difficult market for horror movies. Particularly in recent years, Australia has been regarded as a graveyard for many horror films released theatrically. This is not to say that Australians have not enjoyed the occasional scary movie on the big screen. But what types of horror films have been popular with Australian audiences at the box-office remains poorly understood. Horror films revolve around monsters, the fear of death and the transgression of boundaries, and they aim to scare audiences through ‘gross-out’ or ‘creep-out’ factors (some combine both). The former refers to shocking and graphic portrayals of gore and violence – as seen in the sadistic torture of backpackers in Hostel (Eli Roth, 2005), which depicts limbs being hacked off and eyes being cut from nerve endings. The latter refers to the crafting of fear through mood and suspense without explicit bloodshed, achieved brilliantly in The Sixth Sense’s (M Night Shyamalan, 1999) chilling encounters with ‘dead people’. In creep-out films, it is often what viewers don’t see that is most disturbing. Using an analysis of the top fifty films each year at the Australian box office from 1992 to 2012, this article identifies the most successful horror movies over this period to ascertain what types of horror movies – with reference to creep-out and gross-out factors – have been most popular with domestic audiences.

Dry tropics water smart : a community based approach to residential outdoor water consumption

This paper discusses the Townsville City Council Dry Tropics Water Smart (DTWS) initiative, developed by TCC Integrated Sustainability Services (ISS) and Townsville Water, and informed by The University of Adelaide. The program draws on many years of experience by the TCC team to blend key community-based research approaches in order to develop this residential outdoor water conservation program. Several community pilots have been conducted to test different behaviour change strategies and messages. This paper outlines recent steps taken to develop the community trials, as guided by a combination of behaviour change theories including community-based social marketing and thematic communications methods. Some preliminary results are outlined focused on community uptake of different strategies, community perceptions of communication materials, and some insights into the effectiveness of outdoor water hardware.