A thermoanalytical assessment of an organoclay

High resolution thermogravimetric analysis (TGA) has attracted much attention in the synthesis of organoclays and its applications. In this study, organoclays were synthesised through ion exchange of a single cationic surfactant for sodium ions, and characterised by methods including X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The changes of surface properties in montmorillonite and organoclays intercalated with surfactant were determined using XRD through the changes in the basal spacing. The thermogravimetric analysis (TGA) was applied in this study to investigate more information of the configuration and structural changes in the organoclays with thermal decomposition. There are four different decompositions steps in differential thermogravimetric (DTG) curves. The obtained TG steps are relevant to the arrangement of the surfactant molecules intercalated in montmorillonite and the thermal analysis indicates the thermal stability of surfactant modified clays. This investigation provides new insights into the properties of organoclays and is important in the synthesis and processing of organoclays for environmental applications.

Sulfate intercalated layered double hydroxides prepared by the reformation effect

The removal of the sulfate anion from water using synthetic hydrotalcite (Mg/Al LDH) was investigated using powder x-ray diffraction (XRD) and thermogravimetric analysis (TG). Synthetic hydrotalcite Mg6Al2(OH)16(CO3)∙4H2O was prepared by the co-precipitation method from aluminum and magnesium chloride salts. The synthetic hydrotalcite was thermally activated to a maximum temperature of 380°C. Samples of thermally activated hydrotalcite where then treated with aliquots of 1000ppm sulfate solution. The resulting products where dried and characterized by XRD and TG. Powder XRD revealed that hydrotalcite had been successfully prepared and that the product obtained after treatment with sulfate solution also conformed well to the reference pattern of hydrotalcite. The d(003) spacing of all samples was found to be within the acceptable region for a LDH structure. TG revealed all products underwent a similar decomposition to that of hydrotalcite. It was possible to propose a reasonable mechanism for the thermal decomposition of a sulfate containing Mg/Al LDH. The similarities in the results may indicate that the reformed hydrotalcite may contain carbonate anion as well as sulfate. Further investigation is required to confirm this.

Thermal stability of newberyite Mg(PO3OH)•3H2O – a cave mineral from Skipton lava tubes, Victoria, Australia.

The mineral newberyite Mg(PO3OH)•3H2O is a mineral that has been found in caves such as the Skipton Lava Tubes (SW of Ballarat, Victoria, Australia), Moorba cave, Jurien Bay, Western Australia, and in the Petrogale Cave (Madura , Eucla, Western Australia). Because these minerals contain water, the minerals lend themselves to thermal analysis. The mineral newberyite is found to decompose at 145°C with a water loss of 31.96%, a result which is very close to the theoretical value. The result shows that the mineral is not stable in caves where the temperature exceeds this value. The implication of this result rests with the removal of kidney stones, which have the same composition as newberyite. Point heating focussing on the kidney stone results in the destruction of the kidney stone.

Thermal stability of stercorite H(NH4)Na(PO4)·4H2O – a cave mineral from Petrogale Cave, Madura, Eucla, Western Australia

Thermogravimetric analysis has been used to determine the thermal stability of the mineral stercorite H(NH4)Na(PO4)·4H2O. The mineral stercorite originated from the Petrogale Cave, Madura, Eucla, Western Australia. This cave is one of many caves in the Nullarbor Plain in the South of Western Australia. The mineral is formed by the reaction of bat guano chemicals on calcite substrates. Upon thermal treatment the mineral shows a strong decomposition at 191°C with loss of water and ammonia. Other mass loss steps are observed at 158, 317 and 477°C. Ion current curves indicate a gain of CO2 at higher temperature and are attributed to the thermal decomposition of calcite impurity.

Thermal stability of crandallite CaAl3(PO4)2(OH)5•(H2O) – a ‘cave’ mineral from the Jenolan Caves

Thermogravimetry combined with evolved gas mass spectrometry has been used to characterise the mineral crandallite CaAl3(PO4)2(OH)5•(H2O) and to ascertain the thermal stability of this ‘cave’ mineral. X-ray diffraction proves the presence of the mineral and identifies the products after thermal decomposition. The mineral crandallite is formed through the reaction of calcite with bat guano. Thermal analysis shows that the mineral starts to decompose through dehydration at low temperatures at around 139°C while dehydroxylation occurs over the temperature range 200 to 700°C with loss of OH units. The critical temperature for OH loss is around 416°C and above this temperature the mineral structure is altered. Some minor loss of carbonate impurity occurs at 788°C. This study shows the mineral is unstable above 139°C. This temperature is well above the temperature in caves, which have a maximum temperature of 15°C. A chemical reaction for the synthesis of crandallite is offered and the mechanism for the thermal decomposition is given.

Delegation framework for federated systems

It is not uncommon for enterprises today to be faced with the demand to integrate and incor- porate many different and possibly heterogeneous systems which are generally independently designed and developed, to allow seamless access. In effect, the integration of these systems results in one large whole system that must be able, at the same time, to maintain the local autonomy and to continue working as an independent entity. This problem has introduced a new distributed architecture called federated systems. The most challenging issue in federated systems is to find answers for the question of how to efficiently cooperate while preserving their autonomous characteristic, especially the security autonomy. This thesis intends to address this issue. The thesis reviews the evolution of the concept of federated systems and discusses the organisational characteristics as well as remaining security issues with the existing approaches. The thesis examines how delegation can be used as means to achieve better security, especially authorisation while maintaining autonomy for the participating member of the federation. A delegation taxonomy is proposed as one of the main contributions. The major contribution of this thesis is to study and design a mechanism to support dele- gation within and between multiple security domains with constraint management capability. A novel delegation framework is proposed including two modules: Delegation Constraint Man- agement module and Policy Management module. The first module is designed to effectively create, track and manage delegation constraints, especially for delegation processes which require re-delegation (indirect delegation). The first module employs two algorithms to trace the root authority of a delegation constraint chain and to prevent the potential conflict when creating a delegation constraint chain if necessary. The first module is designed for conflict prevention not conflict resolution. The second module is designed to support the first module via the policy comparison capability. The major function of this module is to provide the delegation framework the capability to compare policies and constraints (written under the format of a policy). The module is an extension of Lin et al.'s work on policy filtering and policy analysis. Throughout the thesis, some case studies are used as examples to illustrate the discussed concepts. These two modules are designed to capture one of the most important aspects of the delegation process: the relationships between the delegation transactions and the involved constraints, which are not very well addressed by the existing approaches. This contribution is significant because the relationships provide information to keep track and en- force the involved delegation constraints and, therefore, play a vital role in maintaining and enforcing security for transactions across multiple security domains.

Principles of taxation law (4th Edition)

Taxation law can be an incredibly complex subject to absorb, particularly when time is limited. Written specifically for students, Principles of Taxation Law 2011 brings much needed clarity to this area of law. Utilising many methods to make this often daunting subject achievable, particular features of the 2011 edition include: • seven parts: overview and structure, principles of income, deductions and offsets, timing issues, investment and business entities, tax avoidance and administration, and indirect taxes; • clearly structured chapters within those parts grouped under helpful headings; • flowcharts, diagrams and tables, end of chapter practice questions, and case summaries; • an appendix containing all of the up to date and relevant rates; and • the online self-testing component mentor, which provides questions for students of both business and law. Every major aspect of the Australian tax system is covered, with chapters on topics such as goods and services tax, superannuation, offsets, partnerships, capital gains tax, trusts, company tax and tax administration. All chapters have been thoroughly revised. Principles of Taxation Law 2011 is the perfect tool to guide the reader from their initial exposure to the subject to success in taxation law exams. [from publisher's website]

Principles of taxation law 2012

Taxation law can be an incredibly complex subject to absorb, particularly when time is limited. Written specifically for students, Principles of Taxation Law 2012 brings much needed clarity to this area of law. Utilising many methods to make this often daunting subject achievable, particular features of the 2012 edition include: * seven parts: overview and structure, principles of income, deductions and offsets, timing issues, investment and business entities, tax avoidance and administration, and indirect taxes; * clearly structured chapters within those parts grouped under helpful headings; * flowcharts, diagrams and tables, end of chapter practice questions, and case summaries; * an appendix containing all of the up to date and relevant rates; and * the online self-testing component mentor, which provides questions for students of both business and law. Every major aspect of the Australian tax system is covered, with chapters on topics such as goods and services tax, superannuation, offsets, partnerships, capital gains tax, trusts, company tax and tax administration. All chapters have been thoroughly revised. Principles of Taxation Law 2012 is the perfect tool to guide the reader from their initial exposure to the subject to success in taxation law exams.

Eye shape and retinal shape, and their relation to peripheral refraction

Purpose: We provide an account of the relationships between eye shape, retinal shape and peripheral refraction. Recent findings: We discuss how eye and retinal shapes may be described as conicoids, and we describe an axis and section reference system for determining shapes. Explanations are given of how patterns of retinal expansion during the development of myopia may contribute to changing patterns of peripheral refraction, and how pre-existing retinal shape might contribute to the development of myopia. Direct and indirect techniques for determining eye and retinal shape are described, and results are discussed. There is reasonable consistency in the literature of eye length increasing at a greater rate than height and width as the degree of myopia increases, so that eyes may be described as changing from oblate/spherical shapes to prolate shapes. However, one study indicates that the retina itself, while showing the same trend, remains oblate in shape for most eyes (discounting high myopia). Eye shape and retinal shape are not the same and merely describing an eye shape as being prolate or oblate is insufficient without some understanding of the parameters contributing to this; in myopia a prolate eye shape is likely to involve both a steepening retina near the posterior pole combined with a flattening (or a reduction in steepening compared with an emmetrope) away from the pole.

Free our cultural archives.

Australians are the creators and custodians of a broad range of cultural materials. This material includes literary, photographic, video and audio archives. These archives should be made available to all Australians for access and reuse, as part of a pre-competitive platform which promotes the interests of the Australian public in gaining access to a diverse range of content that contributes to the development of national and cultural identity. This does not mean that all material must be made available for access and reuse for free and in an unrestricted fashion. But for publicly funded content, free and unrestricted access should be the default. The Venturous Australia report on the National Innovation System recommended that “[t]o the maximum extent possible, information, research and content funded by Australian governments – including national collections – should be made freely available over the internet as part of the global public commons.”1 The report further stated that “both for its direct and indirect benefits to Australia and for the greater global good, Australia should energetically and proudly maximise the extent to which it makes government funded content available as part of the global digital commons...

Hankering

As a man and woman take turns reciting their favourite simple pleasures, text fades in and out on screen. The visible words, which float against a starscape, are approximations and variations of those being spoken. As the video progresses, the voices and the correlating texts start to overlap slightly. What at first seems to be a testiment to small, saccharine satisfactions starts to become a passive-aggressive race for modest contentment. Rubbing the fine line between sweet and sour, “Hankering” plays with the indirect messages that float through our desires, relationships and the languages we use to communicate them.

Reviewing the impact of the 2008/2009 global financial crisis (GFC) on international property markets and property professions

The global financial crisis that impacted on all world economies throughout 2008 and 2009. This impact has not been confined to the finance industries but has had a direct and indirect impact on the property industry worldwide from both an ownership and investment perspective. Property markets have experienced various levels of impact from this event, but universally the greatest impact has been on the traditional commercial and industrial property sectors from the investor perspective, with investment and superannuation funds reporting significant declines in the reported value of these investments. Despite the very direct impact of these declining property markets, the GFC has also had a very significant indirect impact on the various property professions and how these professions are now operating in this declining property market. Of particular interest is the comparison of the property market forecasts in late 2007 to the actual results in 2008/2009.

Development of a 3D culture system to study the skeletal metastasis of prostate cancer

In the cancer research field, most in vitro studies still rely on two-dimensional (2D) cultures. However, the trend is rapidly shifting towards using a three-dimensional (3D) culture system. This is because 3D models better recapitulate the microenvironment of cells, and therefore, yield cellular and molecular responses that more accurately describe the pathophysiology of cancer. By adopting technology platforms established by the tissue engineering discipline, it is now possible to grow cancer cells in extracellular matrix (ECM)-like environments and dictate the biophysical and biochemical properties of the matrix. In addition, 3D models can be modified to recapitulate different stages of cancer progression for instance from the initial development of tumor to metastasis. Inevitably, to recapitulate a heterotypic condition, comprising more than one cell type, it requires a more complex 3D model. To date, 3D models that are available for studying the prostate cancer (CaP)-bone interactions are still lacking. Therefore, the aim of this study is to establish a co-culture model that allows investigation of direct and indirect CaP-bone interactions. Prior to that, 3D polyethylene glycol (PEG)-based hydrogel cultures for CaP cells were first developed and growth conditions were optimised. Characterization of the 3D hydrogel cultures show that LNCaP cells form a multicellular mass that resembles avascular tumor. In comparison to 2D cultures, besides the difference in cell morphology, the response of LNCaP cells to the androgen analogue (R1881) stimulation is different compared to the cells in 2D cultures. This discrepancy between 2D and 3D cultures is likely associated with the cell-cell contact, density and ligand-receptor interactions. Following the 3D monoculture study, a 3D direct co-culture model of CaP cells and the human tissue engineered bone (hTEBC) construct was developed. Interactions between the CaP cells and human osteoblasts (hOBs) resulted in elevation of Matrix Metalloproteinase 9 (MMP9) for PC-3 cells and Prostate Specific Antigen (PSA) for LNCaP cells. To further investigate the paracrine interaction of CaP cells and (hOBs), a 3D indirect co-culture model was developed, where LNCaP cells embedded within PEG hydrogels were co-cultured with hTEBC. It was found that the cellular changes observed reflect the early event of CaP colonizing the bone site. In the absence of androgens, interestingly, up-regulation of PSA and other kallikreins is also detected in the co-culture compared to the LNCaP monoculture. This non androgenic stimulation could be triggered by the soluble factors secreted by the hOB such as Interleukin-6. There are also decrease in alkaline phosphatase (ALP) activity and down-regulation of genes of the hOB when co-cultured with LNCaP cells that have not been previously described. These genes include transforming growth factor β1 (TGFβ1), osteocalcin and Vimentin. However, no changes to epithelial markers (e.g E-cadherin, Cytokeratin 8) were observed in both cell types from the co-culture. Some of these intriguing changes observed in the co-cultures that had not been previously described have enriched the basic knowledge of the CaP cell-bone interaction. From this study, we have shown evidence of the feasibility and versatility of our established 3D models. These models can be adapted to test various hypotheses for studies pertaining to underlying mechanisms of bone metastasis and could provide a vehicle for anticancer drug screening purposes in the future.

Biological responses of human bone marrow mesenchymal stem cells to Sr-M-Si (M = Zn, Mg) silicate bioceramics

Strontium (Sr), Zinc (Zn), magnesium (Mg), and silicon (Si) are reported to be essential trace elements for the growth and mineralization of bone. We speculated that the combination of these bioactive elements in bioceramics may be effective to regulate the osteogenic property of boneforming cells. In this study, two Sr-containing silicate bioceramics, Sr2ZnSi2O7 (SZS) and Sr2MgSi2O7 (SMS), were prepared. The biological response of human bone marrow mesenchymal stem cells (BMSCs) to the two bioceramics (in the forms of powders and dense ceramic bulks) was systematically studied. In powder form, the effect of powder extracts on the viability and alkaline phosphatase (ALP) activity of BMSCs was investigated. In ceramic disc form, both direct and indirect coculture of BMSCs with ceramic discs were used to investigate their biological response, including attachment, proliferation, ALP activity, and bone-related genes expression. Beta-tricalcium phosphate (b-TCP) and akermanite (Ca2MgSi2O7, CMS) were used as control materials. The results showed that the Sr, Zn, and Si (or Sr, Mg, and Si)-containing ionic products from SZS and SMS powders enhanced ALP activity of BMSCs, compared to those from b-TCP. Both SZS and SMS ceramic discs supported the growth of BMSCs, and most importantly, significantly enhanced the ALP activity and bone-related genes expression of BMSCs as compared to b-TCP. The results suggest that the specific combination of bioactive ions (Sr, Zn, Si, e.g.) in bioceramics is a viable way to improve the biological performance of biomaterials, and the form of materials and surface properties were nonnegligible factors to influence cell response.

Environmental degradation of lignin/poly(hydroxybutyrate) blends

Blends of lignin and poly(hydroxybutyrate) (PHB) were obtained by melt extrusion. They were buried in a garden soil for up to 12 months, and the extent and mechanism of degradation were investigated by gravimetric analysis, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and Fourier transform infra-red spectroscopy (FTIR) over the entire range of compositions. The PHB films were disintegrated and lost 45 wt% of mass within 12 months. This value dropped to 12 wt% of mass when only 10 wt% of lignin was present, suggesting that lignin both inhibited and slowed down the rate of PHB degradation. TGA and DSC indicated structural changes, within the lignin/PHB matrix, with burial time, while FTIR results confirmed the fragmentation of the PHB polymer. XPS revealed an accumulation of biofilms on the surface of buried samples, providing evidence of a biodegradation mechanism. Significant surface roughness was observed with PHB films due to microbial attack caused by both loosely and strongly associated micro-organisms. The presence of lignin in the blends may have inhibited the colonisation of the micro-organisms and caused the blends to be more resistant to microbial attack. Analysis suggested that lignin formed strong hydrogen bonds with PHB in the buried samples and it is likely that the rate of breakdown of PHB is reduced, preventing rapid degradation of the blends.