Controlling whole blood activation and resultant clot properties on various material surfaces : a possible therapeutic approach for enhancing bone healing

Injured bone initiates the healing process by forming a blood clot at the damaged site. However, in severe damage, synthetic bone implants are used to provide structural integrity and restore the healing process. The implant unavoidably comes into direct contact with whole blood, leading to a blood clot formation on its surface. Despite this, most research in bone tissue engineering virtually ignores the important role of a blood clot in supporting healing. Surface chemistry of a biomaterial is a crucial property in mediating blood-biomaterials interactions, and hence the formation of the resultant blood clot. Surfaces presenting mixtures of functional groups carboxyl (–COOH) and methyl (–CH3) have been shown to enhance platelet response and coagulation activation, leading to the formation of fibrin fibres. In addition, it has been shown that varying the compositions of these functional groups and the length of alkyl groups further modulate the immune complement response. In this study, we hypothesised that a biomaterial surface with mixture of –COOH/–CH3(methyl), –CH2CH3 (ethyl) or –(CH2)3CH3 (butyl) groups at different ratios would modulate blood coagulation and complement activation, and eventually tailor the structural and functional properties of the blood clot formed on the surface, which subsequently impacts new bone formation. Firstly, we synthesised a series of materials composed of acrylic acid (AA), and methyl (MMA), ethyl (EMA) or butyl methacrylates (BMA) at different ratios and coated on the inner surfaces of incubation vials. Our surface analysis showed that the amount of –COOH groups on the surface coatings was lower than the ratios of AA prepared in the materials even though the surface content of –COOH groups increased with increasing in AA ratios. It was indicated that the surface hydrophobicity increased with increasing alkyl chain length: –CH 3 > –CH2CH3 > –(CH2)3CH3, and decreased with increasing –COOH groups. No significant differences in surface hydrophobicity was found on surfaces with –CH3 and –CH2CH3 groups in the presence of –COOH groups. The material coating was as smooth as uncoated glass and without any major flaws. The average roughness of material-coated surface (3.99 ± 0.54 nm) was slightly higher than that of uncoated glass surface (2.22 ± 0.29 nm). However, no significant differences in surface average roughness was found among surfaces with the same functionalities at different –COOH ratios nor among surfaces with different alkyl groups but the same –COOH ratios. These suggested that the surface functional groups and their compositions had a combined effect on modulating surface hydrophobicity but not surface roughness. The second part of our study was to investigate the effect of surface functional groups and their compositions on blood cascade activation and structural properties of the formed clots. It was found that surfaces with –COOH/–(CH2)3CH3 induced a faster coagulation activation than those with –COOH/–CH3 and –CH2CH3, regardless of the –COOH ratios. An increase in –COOH ratios on –COOH/–CH3 and –CH2CH3 surfaces decreased the rate of activation. Moreover, all material-coated surfaces markedly reduced the complement activation compared to uncoated glass surfaces, and the pattern of complement activation was entirely similar to that of surface-induced coagulation, suggesting there is an interaction between two cascades. The clots formed on material-coated surfaces had thicker fibrin with a tighter network at the exterior when compared to uncoated glass surfaces. Compared to the clot exteriors, thicker fibrins with a loose network were found in clot interiors. Coated surfaces resulted in more rigid clots with a significantly slower fibrinolysis after 1 h of lysis when compared to uncoated glass surfaces. Significant differences in fibrinolysis after 1 h of lysis among clots on material-coated surfaces correlated well with the differences in fibrin thickness and density at clot exterior. In addition, more growth factors were released during clot formation than during clot lysis. From an intact clot, there was a correlation between the amount of PDGF-AB release and fibrin density. Highest amount of PDGF-AB was released from clots formed on surfaces with 40% –COOH/60% –CH 3 (i.e. 65MMA). During clot lysis, the release of PDGF-AB also correlated with the fibrinolytic rate while the release of TGF-â1 was influenced by the fibrin thickness. This suggested that different clot structures led to different release profiles of growth factors in clot intact and degrading stages. We further validated whether the clots formed on material-coatings provide the microenvironment for improved bone healing by using a rabbit femoral defect model. In this pilot study, the implantation of clots formed on 65MMA coatings significantly increased new bone formation with enhanced chondrogenesis, osteoblasts activity and vascularisation, but decreased inflammatory macrophage number at the defects after 4 weeks when compared to commercial bone grafts ChronOSTM â-TCP granules. Empty defects were observed when blood clot formation was inhibited. In summary, our study demonstrated that surface functional groups and their relative ratios on material coatings synergistically modulate activation of blood cascades, resultant fibrin architecture, rigidity, susceptibility to fibrinolysis as well as growth factor release of the formed clots, which ultimately alter the healing microenvironment of injured bones.

An ecological dynamics approach to skill acquisition : implications for development of talent in sport.

This paper proposes how ecological dynamics, a theory focusing on the performer-environment relationship, provides a basis for understanding skill acquisition in sport. From this perspective, learners are conceptualized as complex, neurobiological systems in which inherent self-organisation tendencies support the emergence of adaptive behaviours under a range of interacting task and environmental constraints. Intentions, perceptions and actions are viewed as intertwined processes which underpin functional movement solutions assembled by each learner during skill acquisition. These ideas suggest that skill acquisition programmes need to sample information from the performance environment to guide behaviour in practice tasks. Skill acquisition task protocols should allow performers to use movement variability to explore and create opportunities for action, rather than constraining them to passively receiving information. This conceptualisation also needs to characterize the design of talent evaluation tests, which need to faithfully represent the perception-action relationships in the performance environment. Since the dynamic nature of changing task constraints in sports cannot be predicted over longer timescales, an implication is that talent programmes should focus on developing performance expertise in each individual, rather than over-relying on identification of expert performers at specific points in time.

The experience of being an advanced practice nurse within Australian acute care settings : a systematic review of qualitative evidence

Background There is a vast amount of international literature which, although agreeing on the need for advanced practice nurse roles, simultaneously debates and discusses the difficulties with nomenclature, definition and subsequent implementation of such roles. Due to this ambiguity it is difficult to equally compare evidence in this field across different countries. A context-specific systematic review on the qualitative evidence of the experience of being an advanced practice nurse in Australia has not been undertaken previously, however it is imperative for nursing managers and leaders to understand the complexities of advanced nursing roles in order to effectively utilise and retain these experienced and valuable nurses. With the creation of a national nursing regulating authority in 2010, it is timely to explore in-depth the experience of being an advanced practice nurse from a national perspective. Objective To identify the experience of being an advanced practice nurse working in Australian acute care settings. Inclusion criteria -Types of participants Registered nurses working in advanced practice roles in acute care settings throughout Australia. -Phenomena of interest The experience of being an advanced practice registered nurse working in an Australian acute care setting, as reported by the nurses themselves. -Types of studies Interpretive qualitative studies including designs such as phenomenology, grounded theory and ethnography. -Search strategy A three step search strategy was used to identify published and unpublished studies. The search process was conducted from August to October 2011 and considered published and unpublished studies from 1990 to October 2011. -Methodological quality Studies were appraised for methodological quality by two independent reviewers using the Joanna Briggs Qualitative Assessment and Review Instrument. -Data extraction Data was extracted from the papers included in the review using the standardised Joanna Briggs Institute Qualitative Assessment and Review Instrument data extraction tool. -Data synthesis Research findings were pooled using the Joanna Briggs Institute Qualitative Data and Review Instrument. Results Three published studies and one unpublished dissertation were included in the review. From these four studies, 216 findings were extracted, forming 18 categories which were then analysed to create six synthesised findings. Six meta-syntheses under the headings of expert knowledge, confidence, education, relationships, negative experiences and patient centred experience were formed from the findings. Conclusions The synthesised findings confirm that the experience of advanced practice nurses in Australian acute care settings is complex and greatly influenced personally and professionally by the organisation as well as the unpredictable nature of working with people.

An examination of learning design in elite springboard diving

The overarching aim of this programme of work was to evaluate the effectiveness of the existing learning environment within the Australian Institute of Sport (AIS) elite springboard diving programme. Unique to the current research programme, is the application of ideas from an established theory of motor learning, specifically ecological dynamics, to an applied high performance training environment. In this research programme springboard diving is examined as a complex system, where individual, task, and environmental constraints are continually interacting to shape performance. As a consequence, this thesis presents some necessary and unique insights into representative learning design and movement adaptations in a sample of elite athletes. The questions examined in this programme of work relate to how best to structure practice, which is central to developing an effective learning environment in a high performance setting. Specifically, the series of studies reported in the chapters of this doctoral thesis: (i) provide evidence for the importance of designing representative practice tasks in training; (ii) establish that completed and baulked (prematurely terminated) take-offs are not different enough to justify the abortion of a planned dive; and (iii), confirm that elite athletes performing complex skills are able to adapt their movement patterns to achieve consistent performance outcomes from variable dive take-off conditions. Chapters One and Two of the thesis provide an overview of the theoretical ideas framing the programme of work, and include a review of literature pertinent to the research aims and subsequent empirical chapters. Chapter Three examined the representativeness of take-off tasks completed in the two AIS diving training facilities routinely used in springboard diving. Results highlighted differences in the preparatory phase of reverse dive take-offs completed by elite divers during normal training tasks in the dry-land and aquatic training environments. The most noticeable differences in dive take-off between environments began during the hurdle (step, jump, height and flight) where the diver generates the necessary momentum to complete the dive. Consequently, greater step lengths, jump heights and flight times, resulted in greater board depression prior to take-off in the aquatic environment where the dives required greater amounts of rotation. The differences observed between the preparatory phases of reverse dive take-offs completed in the dry-land and aquatic training environments are arguably a consequence of the constraints of the training environment. Specifically, differences in the environmental information available to the athletes, and the need to alter the landing (feet first vs. wrist first landing) from the take-off, resulted in a decoupling of important perception and action information and a decomposition of the dive take-off task. In attempting to only practise high quality dives, many athletes have followed a traditional motor learning approach (Schmidt, 1975) and tried to eliminate take-off variations during training. Chapter Four examined whether observable differences existed between the movement kinematics of elite divers in the preparation phases of baulked (prematurely terminated) and completed take-offs that might justify this approach to training. Qualitative and quantitative analyses of variability within conditions revealed greater consistency and less variability when dives were completed, and greater variability amongst baulked take-offs for all participants. Based on these findings, it is probable that athletes choose to abort a planned take-off when they detect small variations from the movement patterns (e.g., step lengths, jump height, springboard depression) of highly practiced comfortable dives. However, with no major differences in coordination patterns (topology of the angle-angle plots), and the potential for negative performance outcomes in competition, there appears to be no training advantage in baulking on unsatisfactory take-offs during training, except when a threat of injury is perceived by the athlete. Instead, it was considered that enhancing the athletes' movement adaptability would be a more functional motor learning strategy. In Chapter Five, a twelve-week training programme was conducted to determine whether a sample of elite divers were able to adapt their movement patterns and complete dives successfully, regardless of the perceived quality of their preparatory movements on the springboard. The data indeed suggested that elite divers were able to adapt their movements during the preparatory phase of the take-off and complete good quality dives under more varied take-off conditions; displaying greater consistency and stability in the key performance outcome (dive entry). These findings are in line with previous research findings from other sports (e.g., shooting, triple jump and basketball) and demonstrate how functional or compensatory movement variability can afford greater flexibility in task execution. By previously only practising dives with good quality take-offs, it can be argued that divers only developed strong couplings between information and movement under very specific performance circumstances. As a result, this sample was sometimes characterised by poor performance in competition when the athletes experienced a suboptimal take-off. Throughout this training programme, where divers were encouraged to minimise baulking and attempt to complete every dive, they demonstrated that it was possible to strengthen the information and movement coupling in a variety of performance circumstances, widening of the basin of performance solutions and providing alternative couplings to solve a performance problem even when the take-off was not ideal. The results of this programme of research provide theoretical and experimental implications for understanding representative learning design and movement pattern variability in applied sports science research. Theoretically, this PhD programme contributes empirical evidence to demonstrate the importance of representative design in the training environments of high performance sports programmes. Specifically, this thesis advocates for the design of learning environments that effectively capture and enhance functional and flexible movement responses representative of performance contexts. Further, data from this thesis showed that elite athletes performing complex tasks were able to adapt their movements in the preparatory phase and complete good quality dives under more varied take-off conditions. This finding signals some significant practical implications for athletes, coaches and sports scientists. As such, it is recommended that care should be taken by coaches when designing practice tasks since the clear implication is that athletes need to practice adapting movement patterns during ongoing regulation of multi-articular coordination tasks. For example, volleyball servers can adapt to small variations in the ball toss phase, long jumpers can visually regulate gait as they prepare for the take-off, and springboard divers need to continue to practice adapting their take-off from the hurdle step. In summary, the studies of this programme of work have confirmed that the task constraints of training environments in elite sport performance programmes need to provide a faithful simulation of a competitive performance environment in order that performance outcomes may be stabilised with practice. Further, it is apparent that training environments can be enhanced by ensuring the representative design of task constraints, which have high action fidelity with the performance context. Ultimately, this study recommends that the traditional coaching adage 'perfect practice makes perfect", be reconsidered; instead advocating that practice should be, as Bernstein (1967) suggested, "repetition without repetition".

Marital power process of Korean men married to foreign women : A qualitative study

This study explored how Korean men married to migrant women construct meaning around married life. Data were collected through in-depth interviews with 10 men who had had been married to migrant women for ≥ 2 years. Data collection and analysis were performed concurrently using a grounded theory approach. The core category generated was the process of sustaining a family unit. The men came to understand the importance of a distribution of power within the family in sustaining the family unit. Constituting this process were four stages: recognizing an imbalance of power, relinquishing power, empowering, and fine-tuning the balance of power. This study provides important insight into the dynamics of marital power from men's point of view by demonstrating a link between the way people adjust to married life and the process by which married couples adjust through the distribution and redistribution of power.

A cross-discipline and collaborative approach to identifying the predictors of environmentally friendly and health protective behaviour

Background. As a society, our interaction with the environment is having a negative impact on human health. For example, an increase in car use for short trips, over walking or cycling, has contributed to an increase in obesity, diabetes and poor heart health and also contributes to pollution, which is associated with asthma and other respiratory diseases. In order to change the nature of that interaction, to be more positive and healthy, it is recommended that individuals adopt a range of environmentally friendly behaviours (such as walking for transport and reducing the use of plastics). Effective interventions aimed at increasing such behaviours will need to be evidence based and there is a need for the rapid communication of information from the point of research, into policy and practice. Further, a number of health disciplines, including psychology and public health, share a common mission to promote health and well-being. Therefore, the objective of this project is to take a cross-discipline and collaborative approach to reveal psychological mechanisms driving environmentally friendly behaviour. This objective is further divided into three broad aims, the first of which is to take a cross-discipline and collaborative approach to research. The second aim is to explore and identify the salient beliefs which most strongly predict environmentally friendly behaviour. The third aim is to build an augmented model to explain environmentally friendly behaviour. The thesis builds on the understanding that an interdisciplinary collaborative approach will facilitate the rapid transfer of knowledge to inform behaviour change interventions. Methods. The application of this approach involved two surveys which explored the psycho-social predictors of environmentally friendly behaviour. Following a qualitative pilot study, and in collaboration with an expert panel comprising academics, industry professionals and government representatives, a self-administered, Theory of Planned Behaviour (TPB) based, mail survey was distributed to a random sample of 3000 residents of Brisbane and Moreton Bay Region (Queensland, Australia). This survey explored specific beliefs including attitudes, norms, perceived control, intention and behaviour, as well as environmental altruism and green identity, in relation to walking for transport and switching off lights when not in use. Following analysis of the mail survey data and based on feedback from participants and key stakeholders, an internet survey was employed (N=451) to explore two additional behaviours, switching off appliances at the wall when not in use, and shopping with reusable bags. This work is presented as a series of interrelated publications which address each of the research aims. Presentation of Findings. Chapter five of this thesis consists of a published paper which addresses the first aim of the research and outlines the collaborative and multidisciplinary approach employed in the mail survey. The paper argued that forging alliances with those who are in a position to immediately utilise the findings of research has the potential to improve the quality and timely communication of research. Illustrating this timely communication, Chapter six comprises a report presented to Moreton Bay Regional Council (MBRC). This report addresses aim's one and two. The report contains a summary of participation in a range of environmentally friendly behaviours and identifies the beliefs which most strongly predicted walking for transport and switching off lights (from the mail survey). These salient beliefs were then recommended as targets for interventions and included: participants believing that they might save money; that their neighbours also switch off lights; that it would be inconvenient to walk for transport and that their closest friend also walks for transport. Chapter seven also addresses the second aim and presents a published conference paper in which the salient beliefs predicting the four specified behaviours (from both surveys) are identified and potential applications for intervention are discussed. Again, a range of TPB based beliefs, including descriptive normative beliefs, were predictive of environmentally friendly behaviour. This paper was also provided to MBRC, along with recommendations for applying the findings. For example, as descriptive normative beliefs were consistently correlated with environmentally friendly behaviour, local councils could engage in marketing and interventions (workshops, letter box drops, internet promotions) which encourage parents and friends to model, rather than simply encourage, environmentally friendly behaviour. The final two papers, presented in Chapters eight and nine, addresses the third aim of the project. These papers each present two behaviours together to inform a TPB based theoretical model with which to predict environmentally friendly behaviour. A generalised model is presented, which is found to predict the four specific behaviours under investigation. The role of demographics was explored across each of the behaviour specific models. It was found that some behaviour's differ by age, gender, income or education. In particular, adjusted models predicted more of the variance in walking for transport amongst younger participants and females. Adjusted models predicted more variance in switching off lights amongst those with a bachelor degree or higher and predicted more variance in switching off appliances amongst those on a higher income. Adjusted models predicted more variance in shopping with reusable bags for males, people 40 years or older, those on a higher income and those with a bachelor degree or higher. However, model structure and general predictability was relatively consistent overall. The models provide a general theoretical framework from which to better understand the motives and predictors of environmentally friendly behaviour. Conclusion. This research has provided an example of the benefits of a collaborative interdisciplinary approach. It has identified a number of salient beliefs which can be targeted for social marketing campaigns and educational initiatives; and these findings, along with recommendations, have been passed on to a local council to be used as part of their ongoing community engagement programs. Finally, the research has informed a practical model, as well as behaviour specific models, for predicting sustainable living behaviours. Such models can highlight important core constructs from which targeted interventions can be designed. Therefore, this research represents an important step in undertaking collaborative approaches to improving population health through human-environment interactions.

Work-based assessment : qualitative perspectives of novice nutrition and dietetics educators

Background The assessment of competence for health professionals including nutrition and dietetics professionals in work-based settings is challenging. The present study aimed to explore the experiences of educators involved in the assessment of nutrition and dietetics students in the practice setting and to identify barriers and enablers to effective assessment. Methods A qualitative research approach using in-depth interviews was employed with a convenience sample of inexperienced dietitian assessors. Interviews explored assessment practices and challenges. Data were analysed using a thematic approach within a phenomenological framework. Twelve relatively inexperienced practice educators were purposefully sampled to take part in the present study. Results Three themes emerged from these data. (i) Student learning and thus assessment is hindered by a number of barriers, including workload demands and case-mix. Some workplaces are challenged to provide appropriate learning opportunities and environment. Adequate support for placement educators from the university, managers and their peers and planning are enablers to effective assessment. (ii) The role of the assessor and their relationship with students impacts on competence assessment. (iii) There is a lack of clarity in the tasks and responsibilities of competency-based assessment. Conclusions The present study provides perspectives on barriers and enablers to effective assessment. It highlights the importance of reflective practice and feedback in assessment practices that are synonymous with evidence from other disciplines, which can be used to better support a work-based competency assessment of student performance.

Not losing the plot : creating, collecting and curating qualitative data through a web-based application

Collecting regular personal reflections from first year teachers in rural and remote schools is challenging as they are busily absorbed in their practice, and separated from each other and the researchers by thousands of kilometres. In response, an innovative web-based solution was designed to both collect data and be a responsive support system for early career teachers as they came to terms with their new professional identities within rural and remote school settings. Using an emailed link to a web-based application named goingok.com, the participants are charting their first year plotlines using a sliding scale from ‘distressed’, ‘ok’ to ‘soaring’ and describing their self-assessment in short descriptive posts. These reflections are visible to the participants as a developing online journal, while the collections of de-identified developing plotlines are visible to the research team, alongside numerical data. This paper explores important aspects of the design process, together with the challenges and opportunities encountered in its implementation. A number of the key considerations for choosing to develop a web application for data collection are initially identified, and the resultant application features and scope are then examined. Examples are then provided about how a responsive software development approach can be part of a supportive feedback loop for participants while being an effective data collection process. Opportunities for further development are also suggested with projected implications for future research.

A Bayesian network approach to modelling temporal behaviour of Lyngbya majuscula bloom initiation

Lyngbya majuscula is a cyanobacterium (blue-green algae) occurring naturally in tropical and subtropical coastal areas worldwide. Deception Bay, in Northern Moreton Bay, Queensland, has a history of Lyngbya blooms, and forms a case study for this investigation. The South East Queensland (SEQ) Healthy Waterways Partnership, collaboration between government, industry, research and the community, was formed to address issues affecting the health of the river catchments and waterways of South East Queensland. The Partnership coordinated the Lyngbya Research and Management Program (2005-2007) which culminated in a Coastal Algal Blooms (CAB) Action Plan for harmful and nuisance algal blooms, such as Lyngbya majuscula. This first phase of the project was predominantly of a scientific nature and also facilitated the collection of additional data to better understand Lyngbya blooms. The second phase of this project, SEQ Healthy Waterways Strategy 2007-2012, is now underway to implement the CAB Action Plan and as such is more management focussed. As part of the first phase of the project, a Science model for the initiation of a Lyngbya bloom was built using Bayesian Networks (BN). The structure of the Science Bayesian Network was built by the Lyngbya Science Working Group (LSWG) which was drawn from diverse disciplines. The BN was then quantified with annual data and expert knowledge. Scenario testing confirmed the expected temporal nature of bloom initiation and it was recommended that the next version of the BN be extended to take this into account. Elicitation for this BN thus occurred at three levels: design, quantification and verification. The first level involved construction of the conceptual model itself, definition of the nodes within the model and identification of sources of information to quantify the nodes. The second level included elicitation of expert opinion and representation of this information in a form suitable for inclusion in the BN. The third and final level concerned the specification of scenarios used to verify the model. The second phase of the project provides the opportunity to update the network with the newly collected detailed data obtained during the previous phase of the project. Specifically the temporal nature of Lyngbya blooms is of interest. Management efforts need to be directed to the most vulnerable periods to bloom initiation in the Bay. To model the temporal aspects of Lyngbya we are using Object Oriented Bayesian networks (OOBN) to create ‘time slices’ for each of the periods of interest during the summer. OOBNs provide a framework to simplify knowledge representation and facilitate reuse of nodes and network fragments. An OOBN is more hierarchical than a traditional BN with any sub-network able to contain other sub-networks. Connectivity between OOBNs is an important feature and allows information flow between the time slices. This study demonstrates more sophisticated use of expert information within Bayesian networks, which combine expert knowledge with data (categorized using expert-defined thresholds) within an expert-defined model structure. Based on the results from the verification process the experts are able to target areas requiring greater precision and those exhibiting temporal behaviour. The time slices incorporate the data for that time period for each of the temporal nodes (instead of using the annual data from the previous static Science BN) and include lag effects to allow the effect from one time slice to flow to the next time slice. We demonstrate a concurrent steady increase in the probability of initiation of a Lyngbya bloom and conclude that the inclusion of temporal aspects in the BN model is consistent with the perceptions of Lyngbya behaviour held by the stakeholders. This extended model provides a more accurate representation of the increased risk of algal blooms in the summer months and show that the opinions elicited to inform a static BN can be readily extended to a dynamic OOBN, providing more comprehensive information for decision makers.

Identifying and characterising crashes of returning riders - a new approach

Surveys have identified that many older motorcyclists are returning riders but it is difficult to draw conclusions about their crash risk because of discrepancies in definitions and the inability to identify returning riders in official crash databases. Analyses of NSW crash data were undertaken in which returning riders were defined as aged 25 and over, holding a full licence 10 years prior to the crash, and not the registered operator of one or more motorcycles during the 5-10 years prior to the crash. Based on this definition, there were 472 riders in casualty crashes in 2005-09 who were returning riders (5.5% of riders aged 25 and over in casualty crashes) and the characteristics of their crashes were similar to those involving continuing riders. In contrast, crashes of new riders were more likely to have characteristics suggestive of relatively more riding in urban areas, probably for transport rather than recreation. More work is recommended to assess the validity of the definition to allow a better understanding of the effects of long periods away from riding on riding skills and crash risk.

Brand value of property in Bangkok Metropolitan Region (BMR), Thailand

This paper aims to evaluate the brand value of property in subdivision developments in the Bangkok Metropolitan Region (BMR), Thailand. The result has been determined by the application of a hedonic price model. The development of the model is developed based on a sample of 1,755 property sales during the period of 1992-2010 in eight zones of the BMR. The results indicate that the use of a semi-logarithmic model has stronger explanatory power and is more reliable. Property price increases 12.90% from the branding. Meanwhile, the price annually increases 2.96%; lot size and dwelling area have positive impacts on the price. In contrast, duplexes and townhouses have a negative impact on the price compared to single detached houses. Moreover, the price of properties which are located outside the Bangkok inner city area is reduced by 21.26% to 43.19%. These findings also contribute towards a new understanding of the positive impact of branding on the property price in the BMR. The result is useful for setting selling prices for branded and unbranded properties, and the model could provide a reference for setting property prices in subdivision developments in the BMR.

Experience of being an advanced practice nurse within Australian acute care settings : a systematic review of qualitative evidence

Background Nationally and internationally, advanced practice nurses are working under various titles and in different contexts to address gaps within healthcare systems. Analysis of advanced practice roles in different countries has been undertaken, but due to variations in cultural, geographical and professional factors, it is difficult and perhaps ineffectual to compare roles between countries. Contextual factors may also affect the actual experience of being an advanced practice nurse. A systematic review was therefore undertaken of qualitative evidence on the experience of being an advanced practice nurse in Australia, to provide deeper understanding of the role in the defined context. Methods The review followed the method for qualitative synthesis as per the Joanna Briggs Institute. An extensive search was undertaken of databases and online resources to find published and unpublished studies. Papers from 1990 to October 2011 which met specified inclusion criteria were appraised using the Joanna Briggs Institute Qualitative Assessment and Review Instrument. Results Three published studies and one unpublished dissertation were included in the review. From these studies, 216 findings were extracted and these were formed into 18 categories. Six meta-syntheses grouped under the headings of expert knowledge, confidence, education, relationships, negative experiences and patient-centred experience were created. Organisational factors impact greatly on the experience, professionally and personally. Conclusions Heterogeneity of role titles makes synthesis a difficult process, but contextualising the population provides a pragmatic approach to informing the status of the advanced practice nurse discourse. The review identifies positive and negative experiences of being an advanced practice nurse in Australian acute care settings with overlapping and intertwining findings that reinforce the complexity of the role.

Student focus and prioritization of design parameters in first-year engineering design projects

BACKGROUND Research on engineering design is a core area of concern within engineering education and a fundamental understanding of how engineering students approach and undertake design is necessary in order to develop effective design models and pedagogies. Understanding the factors related to design experiences in education and how they affect student practice can help educators as well as designers to leverage these factors as part of the design process. PURPOSE This study investigated the design practices of first-year engineering students’ and their experiences with a first-year engineering course design project. The research questions that guided the investigation were: 1. From a student perspective, what design parameters or criteria are most important? 2. How does this perspective impact subsequent student design practice throughout the design process? DESIGN/METHOD The authors employed qualitative multi-case study methods (Miles & Huberman, 1994) in order to the answer the research questions. Participant teams were observed and video recorded during team design meetings in which they researched the background for the design problem, brainstormed and sketched possible solutions, as well as built prototypes and final models of their design solutions as part of a course design project. Analysis focused on explanation building (Yin, 2009) and utilized within-case and cross-case analysis (Miles & Huberman, 1994). RESULTS We found that students focused disproportionally on the functional parameter, i.e. the physical implementation of their solution, and the possible/applicable parameter, i.e. a possible and applicable solution that benefited the user, in comparison to other given parameters such as safety and innovativeness. In addition, we found that individual teams focused on the functional and possible/ applicable parameters in early design phases such as brainstorming/ ideation and sketching. When prompted to discuss these non-salient parameters (from the student perspective) in the final design report, student design teams often used a post-hoc justification to support how the final designs fit the parameters that they did not initially consider. CONCLUSIONS This study suggests is that student design teams become fixated on (and consequently prioritize) certain parameters they interpret as important because they feel these parameters were described more explicitly in terms how they were met and assessed. Students fail to consider other parameters, perceived to be less directly assessable, unless prompted to do so. Failure to consider other parameters in the early design phases subsequently affects their approach in design phases as well. Case studies examining students’ study strategies within three Australian Universities illustrate similarities with some student approaches to design.

Improved rural health through a collaborative model of care – qualitative findings

INTRODUCTION Health disparity between urban and rural regions in Australia is well-documented. In the Wheatbelt catchments of Western Australia there is higher incidence and rate of avoidable hospitalisation for chronic diseases. Structured care approach to chronic illnesses is not new but the focus has been on single disease state. A recent ARC Discovery Project on general practice nurse-led chronic disease management of diabetes, hypertension and stable ischaemic heart disease reported improved communication and better medical administration.[1] In our study we investigated the sustainability of such a multi-morbidities general practice –led collaborative model of care in rural Australia. METHODS A QUAN(qual) design was utilised. Eight pairs of rural general practices were matched. Inclusion criteria used were >18 years and capable of giving informed consent, at least one identified risk factor or diagnosed with chronic conditions. Patients were excluded if deemed medically unsuitable. A comprehensive care plan was formulated by the respective general practice nurse in consultation with the treating General Practitioner (GP) and patient based on the individual’s readiness to change, and was informed by available local resource. A case management approach was utilised. Shediaz-Rizkallah and Lee’s conceptual framework on sustainability informed our evaluation.[2] Our primary outcome on measures of sustainability was reduction in avoidable hospitalisation. Secondary outcomes were patients and practitioners acceptance and satisfaction, and changes to pre-determined interim clinical and process outcomes. RESULTS The qualitative interviews highlighted the community preference for a ‘sustainable’ local hospital in addition to general practice. Costs, ease of access, low prioritisation of self chronic care, workforce turnover and perception of losing another local resource if underutilised influenced the respondents’ decision to present at local hospital for avoidable chronic diseases regardless. CONCLUSIONS Despite the pragmatic nature of rural general practice in Australia, the sustainability of chronic multi-morbidities management in general practice require efficient integration of primary-secondary health care and consideration of other social determinants of health. What this study adds: What is already known on this subject: Structured approach to chronic disease management is not new and has been shown to be effective for reducing hospitalisation. However, the focus has been on single disease state. What does this study add: Sustainability of collaborative model of multi-morbidities care require better primary-secondary integration and consideration of social determinants of health.

Variations in acculturation and Australian physical education teacher education students' receptiveness to an alternative pedagogical approach to games teaching

Background The development of intelligent, thinking performers as a central theme in Physical Education curriculum documents worldwide has highlighted the need for an evolution of teaching styles from the dominant reproductive approach. This has prompted an Australian university to change the content and delivery of a games unit within their Physical Education Teacher Education (PETE) course and adopt a productive student centred approach that is compatible with current curriculum directives. The significance of prospective physical educators’ biographies on their receptiveness to this pedagogical innovation was studied to help recognise and understand potential differences and subsequently guide programme development to help improve the impact of teacher education. Purpose To investigate whether past school and sporting experiences are powerful influences on Australian PETE recruits’ initial perspectives about effective physical education teaching practice and their receptiveness to an alternative pedagogical approach. Participants and Setting 49 first year pre-service PETE students (53% male; 47% female; mean age 18.88 ± 1.57 years) undertaking a compulsory unit on games teaching at an Australian university volunteered to take part in the study and were grouped according to their highest level of representation in games, either school/club (n=13), regional (n=20), or state/national (n=16). Students experienced the constraints-led approach as learners and teachers during an 8-week games unit informed by nonlinear pedagogy and underpinned by motor learning theory. Data collection and Analysis Prior to the commencement of the unit participants completed part A of a two part mixed response questionnaire aimed at gathering data about their physical education and sporting background. The data were summarised using descriptive statistics. Pre and post intervention, participants completed part B responding, via Likert Scale with their opinion of the importance of each sub-component of the traditional reproductive style for an effective games teaching session. This resulted in a traditional reproductive games teaching belief score. For each sub-component, participants were invited to respond in more detail to justify their opinions. A one-way between groups analysis of variance (ANOVA), Tukey’s HSD Post Hoc Test and a two - tailed, paired samples t test were used to analyse the quantitative data. Content analysis was used to analyse the qualitative data. Findings The traditional, reproductive approach was the most frequently reported teaching approach used by the physical education teachers and sports coaches of participants in all groups. Prior to the commencement of the alternate games unit, participants in each representative level group held very strong custodial traditional reproductive games teaching beliefs. After experiencing the alternative games unit there were statistically significant differences in the traditional reproductive games teaching belief mean scores for each group, This combined with participants’ qualitative responses indicated a receptiveness to the alternative pedagogy. Conclusions The results of this present study show that, contrary to previous research undertaken in North America, in Australia, it is possible for PETE educators to change beliefs in order to overcome the constraint of acculturation and provide PETE students with the knowledge, understanding and belief in an alternate approach to teaching games in physical education compatible with curriculum documents.