Pixel value to electron density conversion for a Megavoltage Cone Beam CT System

Introduction: The motivation for developing megavoltage (and kilovoltage) cone beam CT (MV CBCT) capabilities in the radiotherapy treatment room was primarily based on the need to improve patient set-up accuracy. There has recently been an interest in using the cone beam CT data for treatment planning. Accurate treatment planning, however, requires knowledge of the electron density of the tissues receiving radiation in order to calculate dose distributions. This is obtained from CT, utilising a conversion between CT number and electron density of various tissues. The use of MV CBCT has particular advantages compared to treatment planning with kilovoltage CT in the presence of high atomic number materials and requires the conversion of pixel values from the image sets to electron density. Therefore, a study was undertaken to characterise the pixel value to electron density relationship for the Siemens MV CBCT system, MVision, and determine the effect, if any, of differing the number of monitor units used for acquisition. If a significant difference with number of monitor units was seen then pixel value to ED conversions may be required for each of the clinical settings. The calibration of the MV CT images for electron density offers the possibility for a daily recalculation of the dose distribution and the introduction of new adaptive radiotherapy treatment strategies. Methods: A Gammex Electron Density CT Phantom was imaged with the MVCB CT system. The pixel value for each of the sixteen inserts, which ranged from 0.292 to 1.707 relative electron density to the background solid water, was determined by taking the mean value from within a region of interest centred on the insert, over 5 slices within the centre of the phantom. These results were averaged and plotted against the relative electron densities of each insert with a linear least squares fit was preformed. This procedure was performed for images acquired with 5, 8, 15 and 60 monitor units. Results: The linear relationship between MVCT pixel value and ED was demonstrated for all monitor unit settings and over a range of electron densities. The number of monitor units utilised was found to have no significant impact on this relationship. Discussion: It was found that the number of MU utilised does not significantly alter the pixel value obtained for different ED materials. However, to ensure the most accurate and reproducible MV to ED calibration, one MU setting should be chosen and used routinely. To ensure accuracy for the clinical situation this MU setting should correspond to that which is used clinically. If more than one MU setting is used clinically then an average of the CT values acquired with different numbers of MU could be utilized without loss in accuracy. Conclusions: No significant differences have been shown between the pixel value to ED conversion for the Siemens MV CT cone beam unit with change in monitor units. Thus as single conversion curve could be utilised for MV CT treatment planning. To fully utilise MV CT imaging for radiotherapy treatment planning further work will be undertaken to ensure all corrections have been made and dose calculations verified. These dose calculations may be either for treatment planning purposes or for reconstructing the delivered dose distribution from transit dosimetry measurements made using electronic portal imaging devices. This will potentially allow the cumulative dose distribution to be determined through the patient’s multi-fraction treatment and adaptive treatment strategies developed to optimize the tumour response.

Effect of moisture and temperature distribution on dried food microstructure and porosity

Dehydration of food materials requires water removal from it. This removal of moisture prevents the growth and reproduction of microorganisms that cause decay and minimizes many of the moisture-driven deterioration reactions (Brennan, 1994). However, during food drying, many other changes occur simultaneously resulting in a modified overall quality (Kompany et al., 1993). Among the physical attributes of dried food material porosity and microstructure are the important ones that can dominant other quality of dried foods (Aguilera et al., 2000). In addition, this two concerned quality attributes affected by process conditions, material components and raw structure of food stuff. In this work, temperature moisture distribution within food materials during microwave drying will be taken into consideration to observe its participation on the microstructure and porosity of the finished product. Apple is the selective materials for this work. Generally, most of the food materials are found in non-uniformed moisture contained condition. To develop non uniform temperature distribution, food materials have been dried in a microwave oven with different power levels (Chua et al., 2000). First of all, temperature and moisture model is simulated by COMSOL Multiphysics. Later on, digital imaging camera and Image Pro Premier software have been deployed to observation moisture distribution and thermal imaging camera for temperature distribution. Finally, Microstructure and porosity of the food materials are obtained from scanning electron microscope and porosity measuring devices respectively . Moisture distribution and temperature during drying influence the microstructure and porosity significantly. Specially, High temperature and moisture contained regions show less porosity and more rupture. These findings support other literatures of Halder et al. (2011) and Rahman et al (1990). On the other hand, low temperature and moisture regions depict uniform microstructure and high porosity. This work therefore assists in better understanding of the role of moisture and temperature distribution to a prediction of micro structure and porosity of dried food materials.

Food insecurity : is it an issue among tertiary students

Insufficient access to food is known to compromise tertiary studies. Students often belong to groups known to have poor food security such as those renting or relying on government payments. The present study administered a cross-sectional survey incorporating the USDA food security survey module (FSSM) to 810 students at a metropolitan university in Brisbane, Australia. One in four students indicated they were food insecure, this being double that previously reported for tertiary students and five times that previously reported for the general population. Factors associated with food insecurity included low income, reliance on government support and renting. Students from food insecure households were twice as likely to report only fair or poor general health and three times as likely to have deferred their studies due to financial difficulties. Further, at least 80 % of these students reported that their studies were compromised. Strategies to alleviate food insecurity among students could improve retention rates and educational outcomes.

Indigenous knowledge and IP food security : a review of concepts and cases

Dáwat, Pamahándí, Tawíd, Ságda, Lampísa, Ibabások, Lapát, Panedlák: for most of us gathered here, these are words that we don’t usually use in our daily lives. Others may consider them as exotic, alien, funny and even backward. However, for indigenous kindred among us, these words denote an intimate identity and deep understanding of the world around them. It constitutes a broader knowledge system, be written or otherwise, which guides them in the management of resources within their ancestral land. This paper will provide a brief theoretical framework of the concepts of indigenous knowledge systems—hereinafter called IKS, and indigenous peoples food security, and hopefully a deeper or continued appreciation in the study of both concepts in general.

A gender comparison of food shopper typologies

This research segments male and female food shoppers based on store and product attribute evaluations, enjoyment, planning, and shopping responsibility. A rich profile for each segment is developed from a sample of 580 primary food shoppers. Gender comparisons are operationalized and these developed food shopper typologies are contrasted against earlier works. Factor analysis, cluster analysis, and ANOVA were employed to develop specific segments of shoppers. This is the first study to identify specific groups of male food shoppers and contrast these to traditional female shoppers and earlier typographical works. The research provides the basis for further cross-cultural, cross-contextual comparative studies.

Impact of a school-based food garden on attitudes and identification skills regarding vegetables and fruit : a 12-month intervention trial

Objective To determine changes in ability to identify specific vegetables and fruits, and attitudes towards vegetables and fruit, associated with the introduction of a school-based food garden. Design A 12-month intervention trial using a historical control (control n 132, intervention n 120), class-based, self-administered questionnaires requiring one-word answers and 3-point Likert scale responses. Setting A state primary school (grades 4 to 7) in a low socio-economic area of Brisbane, Australia. Intervention The introduction of a school-based food garden, including the funding of a teacher coordinator for 11 h/week to facilitate integration of garden activities into the curriculum. Main outcome measures Ability to identify a series of vegetables and fruits, attitudes towards vegetables and fruit. Analysis Frequency distributions for each item were generated and χ2 analyses were used to determine statistical significance. Exploratory factor analysis was employed to detect major trends in data. Results The intervention led to enhanced ability to identify individual vegetables and fruits, greater attention to origins of produce (garden-grown and fresh), changes to perceived consumption of vegetables and fruits, and enhanced confidence in preparing fruit and vegetable snacks, but decreased interest in trying new fruits. Conclusions The introduction of this school-based food garden was associated with skill and attitudinal changes conducive to enhancing vegetable and fruit consumption. The ways in which such changes might impact on dietary behaviours and intake require further analysis.

Effect of temperature distribution on predicting quality of microwave dehydrated food

During food drying, many other changes occur simultaneously, resulting in an improved overall quality. Among the quality attributes, the structure and its corresponding color influence directly or indirectly other properties of food. In addition, these quality attributes are affected by process conditions, material components and the raw structure of the foodstuff. In this work, the temperature distribution within food materials during microwave drying has been taken into consideration to observe its role in color modification. In order to determine the temperature distribution of microwave-dried food (apple), a thermal imaging camera has been used. The image acquired from the digital camera has been analysed using image J software in order to get the color change of fresh and dried apple. The results show that temperature distribution plays an important role in determining the quality of the food. The thermal imaging camera was deployed to observe the temperature distribution within food materials during drying. It is clearly observed from the higher value of (ERGB =102) and the uneven color change that uneven temperature distribution can influence customer perceptions of the quality of dried food. Simulation of a mathematical model of temperature distribution during microwave drying can make it possible to predict the colour and texture of the microwaved food.

Allelic variation at a single gene increases food value in a drought-tolerant staple cereal

The production of adequate agricultural outputs to support the growing human population places great demands on agriculture, especially in light of ever-greater restrictions on input resources. Sorghum is a drought-adapted cereal capable of reliable production where other cereals fail, and thus represents a good candidate to address food security as agricultural inputs of water and arable land grow scarce. A long-standing issue with sorghum grain is that it has an inherently lower digestibility. Here we show that a low-frequency allele type in the starch metabolic gene, pullulanase, is associated with increased digestibility, regardless of genotypic background. We also provide evidence that the beneficial allele type is not associated with deleterious pleiotropic effects in the modern field environment. We argue that increasing the digestibility of an adapted crop is a viable way forward towards addressing food security while maximizing water and land-use efficiency.

Design LED innovation to rejuvenate local food systems and healthy communities : an emerging research agenda

Food Sovereignty (food freedom) is about empowering people to develop their own local food system. Food Sovereignty challenges designers to enable people to innovate the local food system, rather than having a food system which is dictated by corporate interests and failed business ethics. Communities are realising the potential for design to assist in the innovation process, and add strategic value to potentially localise the food system. Design Led Innovation (DLI) offers a strategic framework to address large-scale cultural, systemic and economic changes. The DLI approach empowers communities to take organised action to achieve a healthy, prosperous and happy way of life. DLI can assist with business models in the business world and it is evident this approach can assist with creating social change too. This paper presents on an emerging research agenda aimed to assist designer’s focus from individuals and systems to communities and urban problems. This paper also presents the research proposition that DLI and service design coupled with social entrepreneurial ventures such as local food projects and creative community inventions, have the potential to enable social innovation for healthy and happy communities.

Food in an Australian primary school curriculum : a critical sociological study

Food is a multidimensional construct. It has social, cultural, economic, psychological, emotional, biological, and political dimensions. It is both a material object and a catalyst for a range of social and cultural action. Richly implicated in the social and cultural milieu, food is a central marker of culture and society. Yet little is known about the messages and knowledges in the school curriculum about food. Popular debates around food in schools are largely connected with biomedical issues of obesity, exercise and nutrition. This is a study of the sociological dimensions of food-related messages, practices and knowledge formations in the primary school curriculum. It uses an exploratory, qualitative case study methodology to identify and examine the food activities of a Year 5 class in a Queensland school. Data was gathered over a twoyear period using observation, documentation and interviews methods. Food was found to be an integral part of the primary school's activity. It had economic, symbolic, pedagogic, and instrumental value. Messages about food were found in the official, enacted and hidden curricular which were framed by a food governance framework of legislation, procedures and norms. In the school studied, food knowledge was commodified as a part of a political economy that centred on an 'eat more' message. Certain foods were privileged over others while myths about energy, fruit, fruit juice and sugar shaped student dispositions, values, norms and action. There was little engagement with the cognitive and behavioural dimensions of food and nutrition. The thesis concludes with recommendations for a whole scale reconsideration of food in schools as curricular content and knowledge.

Taking culture seriously : the case of Indigenous knowledge and food security

Mainstream discourse on the revolving around food security is often portrayed by macro level indicators on nutrition, consumption and food production. While these indicators may prove significant in addressing food security in the national and regional levels, it falls short in addressing it among the indigenous peoples’ (IP) communities in the Philippines. Reflecting through the experiences in agricultural production, indigenous knowledge and socio-political institutions are relevant factors that must be seriously considered when food security among IPs are concerned. It is argued that disregarding micro level interactions over macro development policies will not address the issue of food security among marginalized sectors. The paper presents policy recommendations in taking cultural systems seriously in addressing food security among indigenous peoples.

Designing for human–food interaction : an introduction to the special issue on ‘food and interaction design’

With this special issue, we draw attention to the growing and diverse field of HCI researchers exploring the interstices of food, technology and everyday practices. This special issue builds on the CHI workshop of the same name (Comber et al., 2012a), where we brought together the community of researchers that take food as a point from which to understand people and design technology. The workshop aimed to ‘to attend to the practical and theoretical difficulties in designing for human–food interactions in everyday life’ identifying four thematic areas of food practices – health and wellbeing; sustainability; food experiences; and alternative food cultures. These practical and theoretical difficulties are evident in the papers that we present here, though the distinction between our four themes, premised by complexities of food practices, is a little less evident. Thus, in the papers that follow we explore how the social, technological, cultural and methodological intertwine in the field of human–food interaction.