Development of gas sensing technology for ground and airborne applications powered by solar energy : methodology and experimental results

Monitoring gases for environmental, industrial and agricultural fields is a demanding task that requires long periods of observation, large quantity of sensors, data management, high temporal and spatial resolution, long term stability, recalibration procedures, computational resources, and energy availability. Wireless Sensor Networks (WSNs) and Unmanned Aerial Vehicles (UAVs) are currently representing the best alternative to monitor large, remote, and difficult access areas, as these technologies have the possibility of carrying specialised gas sensing systems, and offer the possibility of geo-located and time stamp samples. However, these technologies are not fully functional for scientific and commercial applications as their development and availability is limited by a number of factors: the cost of sensors required to cover large areas, their stability over long periods, their power consumption, and the weight of the system to be used on small UAVs. Energy availability is a serious challenge when WSN are deployed in remote areas with difficult access to the grid, while small UAVs are limited by the energy in their reservoir tank or batteries. Another important challenge is the management of data produced by the sensor nodes, requiring large amount of resources to be stored, analysed and displayed after long periods of operation. In response to these challenges, this research proposes the following solutions aiming to improve the availability and development of these technologies for gas sensing monitoring: first, the integration of WSNs and UAVs for environmental gas sensing in order to monitor large volumes at ground and aerial levels with a minimum of sensor nodes for an effective 3D monitoring; second, the use of solar energy as a main power source to allow continuous monitoring; and lastly, the creation of a data management platform to store, analyse and share the information with operators and external users. The principal outcomes of this research are the creation of a gas sensing system suitable for monitoring any kind of gas, which has been installed and tested on CH4 and CO2 in a sensor network (WSN) and on a UAV. The use of the same gas sensing system in a WSN and a UAV reduces significantly the complexity and cost of the application as it allows: a) the standardisation of the signal acquisition and data processing, thereby reducing the required computational resources; b) the standardisation of calibration and operational procedures, reducing systematic errors and complexity; c) the reduction of the weight and energy consumption, leading to an improved power management and weight balance in the case of UAVs; d) the simplification of the sensor node architecture, which is easily replicated in all the nodes. I evaluated two different sensor modules by laboratory, bench, and field tests: a non-dispersive infrared module (NDIR) and a metal-oxide resistive nano-sensor module (MOX nano-sensor). The tests revealed advantages and disadvantages of the two modules when used for static nodes at the ground level and mobile nodes on-board a UAV. Commercial NDIR modules for CO2 have been successfully tested and evaluated in the WSN and on board of the UAV. Their advantage is the precision and stability, but their application is limited to a few gases. The advantages of the MOX nano-sensors are the small size, low weight, low power consumption and their sensitivity to a broad range of gases. However, selectivity is still a concern that needs to be addressed with further studies. An electronic board to interface sensors in a large range of resistivity was successfully designed, created and adapted to operate on ground nodes and on-board UAV. The WSN and UAV created were powered with solar energy in order to facilitate outdoor deployment, data collection and continuous monitoring over large and remote volumes. The gas sensing, solar power, transmission and data management systems of the WSN and UAV were fully evaluated by laboratory, bench and field testing. The methodology created to design, developed, integrate and test these systems was extensively described and experimentally validated. The sampling and transmission capabilities of the WSN and UAV were successfully tested in an emulated mission involving the detection and measurement of CO2 concentrations in a field coming from a contaminant source; the data collected during the mission was transmitted in real time to a central node for data analysis and 3D mapping of the target gas. The major outcome of this research is the accomplishment of the first flight mission, never reported before in the literature, of a solar powered UAV equipped with a CO2 sensing system in conjunction with a network of ground sensor nodes for an effective 3D monitoring of the target gas. A data management platform was created using an external internet server, which manages, stores, and shares the data collected in two web pages, showing statistics and static graph images for internal and external users as requested. The system was bench tested with real data produced by the sensor nodes and the architecture of the platform was widely described and illustrated in order to provide guidance and support on how to replicate the system. In conclusion, the overall results of the project provide guidance on how to create a gas sensing system integrating WSNs and UAVs, how to power the system with solar energy and manage the data produced by the sensor nodes. This system can be used in a wide range of outdoor applications, especially in agriculture, bushfires, mining studies, zoology, and botanical studies opening the way to an ubiquitous low cost environmental monitoring, which may help to decrease our carbon footprint and to improve the health of the planet.

Field-effect transistors based on self-organized molecular nanostripes

Charge transport properties in organic semiconductors depend strongly on molecular order. Here we demonstrate field-effect transistors where drain current flows through a precisely defined array of nanostripes made of crystalline and highly ordered molecules. The molecular stripes are fabricated across the channel of the transistor by a stamp-assisted deposition of the molecular semiconductors from a solution. As the solvent evaporates, the capillary forces drive the solution to form menisci under the stamp protrusions. The solute precipitates only in the regions where the solution is confined by the menisci once the critical concentration is reached and self-organizes into molecularly ordered stripes 100-200 nm wide and a few monolayers high. The charge mobility measured along the stripes is 2 orders of magnitude larger than the values measured for spin-coated thin films.

Real-time decision making by driverless city vehicles : a discrete event driven approach

This thesis addresses the topic of real-time decision making by driverless (autonomous) city vehicles, i.e. their ability to make appropriate driving decisions in non-simplified urban traffic conditions. After addressing the state of research, and explaining the research question, the thesis presents solutions for the subcomponents which are relevant for decision making with respect to information input (World Model), information output (Driving Maneuvers), and the real-time decision making process. TheWorld Model is a software component developed to fulfill the purpose of collecting information from perception and communication subsystems, maintaining an up-to-date view of the vehicle’s environment, and providing the required input information to the Real-Time Decision Making subsystem in a well-defined, and structured way. The real-time decision making process consists of two consecutive stages. While the first decision making stage uses a Petri net to model the safetycritical selection of feasible driving maneuvers, the second stage uses Multiple Criteria Decision Making (MCDM) methods to select the most appropriate driving maneuver, focusing on fulfilling objectives related to efficiency and comfort. The complex task of autonomous driving is subdivided into subtasks, called driving maneuvers, which represent the output (i.e. decision alternatives) of the real-time decision making process. Driving maneuvers are considered as implementations of closed-loop control algorithms, each capable of maneuvering the autonomous vehicle in a specific traffic situation. Experimental tests in both a 3D simulation and real-world experiments attest that the developed approach is suitable to deal with the complexity of real-world urban traffic situations.

Knowledge management challenges in small-and medium-sized enterprises

Background & Research Focus Managing knowledge for innovation and organisational benefit has been extensively investigated in studies of large firms (Smith, Collins & Clark, 2005; Zucker, et al., 2007) and to a large extent there is limited research into studies of small- and medium- sized enterprises (SMEs). There are some investigations in knowledge management research on SMEs, but what remains to be seen in particular is the question of where are the potential challenges for managing knowledge more effectively within these firms? Effective knowledge management (KM) processes and systems lead to improved performance in pursuing distinct capabilities that contribute to firm-level innovation (Nassim 2009; Zucker et al. 2007; Verona and Ravasi 2003). Managing internal and external knowledge in a way that links it closely to the innovation process can assist the creation and implementation of new products and services. KM is particularly important in knowledge intensive firms where the knowledge requirements are highly specialized, diverse and often emergent. However, to a large extent the KM processes of small firms that are often the source of new knowledge and an important element of the value networks of larger companies have not been closely studied. To address this gap which is of increasing importance with the growing number of small firms, we need to further investigate knowledge management processes and the ways that firms find, capture, apply and integrate knowledge from multiple sources for their innovation process. This study builds on the previous literature and applies existing frameworks and takes the process and activity view of knowledge management as a starting point of departure (see among others Kraaijenbrink, Wijnhoven & Groen, 2007; Enberg, Lindkvist, & Tell, 2006; Lu, Wang & Mao, 2007). In this paper, it is attempted to develop a better understanding of the challenges of knowledge management within the innovation process in small knowledge-oriented firms. The paper aims to explore knowledge management processes and practices in firms that are engaged in the new product/service development programs. Consistent with the exploratory character of the study, the research question is: How is knowledge integrated, sourced and recombined from internal and external sources for innovation and new product development? Research Method The research took an exploratory case study approach and developed a theoretical framework to investigate the knowledge situation of knowledge-intensive firms. Equipped with the conceptual foundation, the research adopted a multiple case study method investigating four diverse Australian knowledge-intensive firms from IT, biotechnology, nanotechnology and biochemistry industries. The multiple case study method allowed us to document in some depth the knowledge management experience of the theses firms. Case study data were collected through a review of company published data and semi-structured interviews with managers using an interview guide to ensure uniform coverage of the research themes. This interview guide was developed following development of the framework and a review of the methodologies and issues covered by similar studies in other countries and used some questions common to these studies. It was framed to gather data around knowledge management activity within the business, focusing on the identification, acquisition and utilisation of knowledge, but collecting a range of information about subject as well. The focus of the case studies was on the use of external and internal knowledge to support their knowledge intensive products and services. Key Findings Firstly a conceptual and strategic knowledge management framework has been developed. The knowledge determinants are related to the nature of knowledge, organisational context, and mechanism of the linkages between internal and external knowledge. Overall, a number of key observations derived from this study, which demonstrated the challenges of managing knowledge and how important KM is as a management tool for innovation process in knowledge-oriented firms. To summarise, findings suggest that knowledge management process in these firms is very much project focused and not embedded within the overall organisational routines and mainly based on ad hoc and informal processes. Our findings highlighted lack of formal knowledge management process within our sampled firms. This point to the need for more specialised capabilities in knowledge management for these firms. We observed a need for an effective knowledge transfer support system which is required to facilitate knowledge sharing and particularly capturing and transferring tacit knowledge from one team members to another. In sum, our findings indicate that building effective and adaptive IT systems to manage and share knowledge in the firm is one of the biggest challenges for these small firms. Also, there is little explicit strategy in small knowledge-intensive firms that is targeted at systematic KM either at the strategic or operational level. Therefore, a strategic approach to managing knowledge for innovation as well as leadership and management are essential to achieving effective KM. In particular, research findings demonstrate that gathering tacit knowledge, internal and external to the organization, and applying processes to ensure the availability of knowledge for innovation teams, drives down the risks and cost of innovation. KM activities and tools, such as KM systems, environmental scanning, benchmarking, intranets, firm-wide databases and communities of practice to acquire knowledge and to make it accessible, were elements of KM. Practical Implications The case study method that used in this study provides practical insight into the knowledge management process within Australian knowledge-intensive firms. It also provides useful lessons which can be used by other firms in managing the knowledge more effectively in the innovation process. The findings would be helpful for small firms that may be searching for a practical method for managing and integrating their specialised knowledge. Using the results of this exploratory study and to address the challenges of knowledge management, this study proposes five practices that are discussed in the paper for managing knowledge more efficiently to improve innovation: (1) Knowledge-based firms must be strategic in knowledge management processes for innovation, (2) Leadership and management should encourage various practices for knowledge management, (3) Capturing and sharing tacit knowledge is critical and should be managed, (4)Team knowledge integration practices should be developed, (5) Knowledge management and integration through communication networks, and technology systems should be encouraged and strengthen. In sum, the main managerial contribution of the paper is the recognition of knowledge determinants and processes, and their effects on the effective knowledge management within firm. This may serve as a useful benchmark in the strategic planning of the firm as it utilises new and specialised knowledge.

Biologically inspired SLAM using Wi-Fi

Wi-Fi is a commonly available source of localization information in urban environments but is challenging to integrate into conventional mapping architectures. Current state of the art probabilistic Wi-Fi SLAM algorithms are limited by spatial resolution and an inability to remove the accumulation of rotational error, inherent limitations of the Wi-Fi architecture. In this paper we leverage the low quality sensory requirements and coarse metric properties of RatSLAM to localize using Wi-Fi fingerprints. To further improve performance, we present a novel sensor fusion technique that integrates camera and Wi-Fi to improve localization specificity, and use compass sensor data to remove orientation drift. We evaluate the algorithms in diverse real world indoor and outdoor environments, including an office floor, university campus and a visually aliased circular building loop. The algorithms produce topologically correct maps that are superior to those produced using only a single sensor modality.

A simple nutrition screening tool for paediatric inpatients

Background: Pediatric nutrition risk screening tools are not routinely implemented throughout many hospitals, despite prevalence studies demonstrating malnutrition is common in hospitalized children. Existing tools lack the simplicity of those used to assess nutrition risk in the adult population. This study reports the accuracy of a new, quick, and simple pediatric nutrition screening tool (PNST) designed to be used for pediatric inpatients. Materials and Methods: The pediatric Subjective Global Nutrition Assessment (SGNA) and anthropometric measures were used to develop and assess the validity of 4 simple nutrition screening questions comprising the PNST. Participants were pediatric inpatients in 2 tertiary pediatric hospitals and 1 regional hospital. Results: Two affirmative answers to the PNST questions were found to maximize the specificity and sensitivity to the pediatric SGNA and body mass index (BMI) z scores for malnutrition in 295 patients. The PNST identified 37.6% of patients as being at nutrition risk, whereas the pediatric SGNA identified 34.2%. The sensitivity and specificity of the PNST compared with the pediatric SGNA were 77.8% and 82.1%, respectively. The sensitivity of the PNST at detecting patients with a BMI z score of less than -2 was 89.3%, and the specificity was 66.2%. Both the PNST and pediatric SGNA were relatively poor at detecting patients who were stunted or overweight, with the sensitivity and specificity being less than 69%. Conclusion: The PNST provides a sensitive, valid, and simpler alternative to existing pediatric nutrition screening tools such as Screening Tool for the Assessment of Malnutrition in Pediatrics (STAMP), Screening Tool Risk on Nutritional status and Growth (STRONGkids), and Paediatric Yorkhill Malnutrition Score (PYMS) to ensure the early detection of hospitalized children at nutrition risk.

The Catlin Seaview Survey – kilometre-scale seascape assessment, and monitoring of coral reef ecosystems

1.Marine ecosystems provide critically important goods and services to society, and hence their accelerated degradation underpins an urgent need to take rapid, ambitious and informed decisions regarding their conservation and management. 2.The capacity, however, to generate the detailed field data required to inform conservation planning at appropriate scales is limited by time and resource consuming methods for collecting and analysing field data at the large scales required. 3.The ‘Catlin Seaview Survey’, described here, introduces a novel framework for large-scale monitoring of coral reefs using high-definition underwater imagery collected using customized underwater vehicles in combination with computer vision and machine learning. This enables quantitative and geo-referenced outputs of coral reef features such as habitat types, benthic composition, and structural complexity (rugosity) to be generated across multiple kilometre-scale transects with a spatial resolution ranging from 2 to 6 m2. 4.The novel application of technology described here has enormous potential to contribute to our understanding of coral reefs and associated impacts by underpinning management decisions with kilometre-scale measurements of reef health. 5.Imagery datasets from an initial survey of 500 km of seascape are freely available through an online tool called the Catlin Global Reef Record. Outputs from the image analysis using the technologies described here will be updated on the online repository as work progresses on each dataset. 6.Case studies illustrate the utility of outputs as well as their potential to link to information from remote sensing. The potential implications of the innovative technologies on marine resource management and conservation are also discussed, along with the accuracy and efficiency of the methodologies deployed.

Using qualitative mixed methods to study small health care organizations while maximising trustworthiness and authenticity

Background The primary health care sector delivers the majority of health care in western countries through small, community-based organizations. However, research into these healthcare organizations is limited by the time constraints and pressure facing them, and the concern by staff that research is peripheral to their work. We developed Q-RARA—Qualitative Rapid Appraisal, Rigorous Analysis—to study small, primary health care organizations in a way that is efficient, acceptable to participants and methodologically rigorous. Methods Q-RARA comprises a site visit, semi-structured interviews, structured and unstructured observations, photographs, floor plans, and social scanning data. Data were collected over the course of one day per site and the qualitative analysis was integrated and iterative. Results We found Q-RARA to be acceptable to participants and effective in collecting data on organizational function in multiple sites without disrupting the practice, while maintaining a balance between speed and trustworthiness. Conclusions The Q-RARA approach is capable of providing a richly textured, rigorous understanding of the processes of the primary care practice while also allowing researchers to develop an organizational perspective. For these reasons the approach is recommended for use in small-scale organizations both within and outside the primary health care sector.

Pedestrian-cyclist interactions at bus stops along segregated bike paths : a case study of Montreal

Safety is one of the major world health issues, and is even more acute for “vulnerable” road users, pedestrians and cyclists. At the same time, public authorities are promoting the active modes of transportation that involve these very users for their health benefits. It is therefore important to understand the factors and designs that provide the best safety for vulnerable road users and encourage more people to use these modes. Qualitative and quantitative shortcomings of collisions make it necessary to use surrogate measures of safety in studying these modes. Some interactions without a collision such as conflicts can be good surrogates of collisions as they are more frequent and less costly. To overcome subjectivity and reliability challenges, automatic conflict analysis using video cameras and deriving users’ trajectories is a solution to overcome shortcomings of manual conflict analysis. The goal of this paper is to identify and characterize various interactions between cyclists and pedestrians at bus stops along bike paths using a fully automated process. Three conflict severity indicators are calculated and adapted to the situation of interest to capture those interactions. A microscopic analysis of users’ behavior is proposed to explain interactions more precisely. Eventually, the study aims to show the capability of automatically collecting and analyzing data for pedestrian-cyclist interactions at bus stops along segregated bike paths in order to better understand the actual and perceived risks of these facilities.

What patient information allows us to make accurate predictions of outcome?

Only some of the information contained in a medical record will be useful to the prediction of patient outcome. We describe a novel method for selecting those outcome predictors which allow us to reliably discriminate between adverse and benign end results. Using the area under the receiver operating characteristic as a nonparametric measure of discrimination, we show how to calculate the maximum discrimination attainable with a given set of discrete valued features. This upper limit forms the basis of our feature selection algorithm. We use the algorithm to select features (from maternity records) relevant to the prediction of failure to progress in labour. The results of this analysis motivate investigation of those predictors of failure to progress relevant to parous and nulliparous sub-populations.

The clinical utility of the Cornell Scale for Depression in Dementia as a routine assessment in nursing homes

Objective To examine the clinical utility of the Cornell Scale for Depression in Dementia (CSDD) in nursing homes. Setting 14 nursing homes in Sydney and Brisbane, Australia. Participants 92 residents with a mean age of 85 years. Measurements Consenting residents were assessed by care staff for depression using the CSDD as part of their routine assessment. Specialist clinicians conducted assessment of depression using the Semi-structured Clinical Diagnostic Interview for DSM-IV-TR Axis I Disorders for residents without dementia or the Provisional Diagnostic Criteria for Depression in Alzheimer Disease for residents with dementia to establish expert clinical diagnoses of depression. The diagnostic performance of the staff completed CSDD was analyzed against expert diagnosis using receiver operating characteristic (ROC) curves. Results The CSDD showed low diagnostic accuracy, with areas under the ROC curve being 0.69, 0.68 and 0.70 for the total sample, residents with dementia and residents without dementia, respectively. At the standard CSDD cutoff score, the sensitivity and specificity were 71% and 59% for the total sample, 69% and 57% for residents with dementia, and 75% and 61% for residents without dementia. The Youden index (for optimizing cut-points) suggested different depression cutoff scores for residents with and without dementia. Conclusion When administered by nursing home staff the clinical utility of the CSDD is highly questionable in identifying depression. The complexity of the scale, the time required for collecting relevant information, and staff skills and knowledge of assessing depression in older people must be considered when using the CSDD in nursing homes.

Cryptographic hash functions

Cryptographic hash functions are an important tool of cryptography and play a fundamental role in efficient and secure information processing. A hash function processes an arbitrary finite length input message to a fixed length output referred to as the hash value. As a security requirement, a hash value should not serve as an image for two distinct input messages and it should be difficult to find the input message from a given hash value. Secure hash functions serve data integrity, non-repudiation and authenticity of the source in conjunction with the digital signature schemes. Keyed hash functions, also called message authentication codes (MACs) serve data integrity and data origin authentication in the secret key setting. The building blocks of hash functions can be designed using block ciphers, modular arithmetic or from scratch. The design principles of the popular Merkle–Damgård construction are followed in almost all widely used standard hash functions such as MD5 and SHA-1.

Strategies for teaching evidence-based practice to undergraduate health students: A systematic review protocol

Review question/objective The objective of this review is to find, critically appraise and synthesize the available quantitative evidence on the effectiveness of interventions that promote successful teaching of the evidence-based practice process in undergraduate health students, in preparation for them to become professional evidence-based practitioners. More specifically, the question that this review seeks to answer is: What is the effectiveness of teaching strategies for evidence-based practice for undergraduate health students? Inclusion criteria Types of participants This review will consider studies that include undergraduate health students from any undergraduate health discipline, including but not limited to medicine, nursing and allied health. Post graduate and post-registration students will not be included. Types of interventions This review will consider studies that evaluate strategies or interventions aimed at teaching any or all of the five steps of evidence-based practice, namely asking a structured clinical question; collecting the best evidence available; critically appraising the evidence to ensure validity, relevance and applicability; applying or integrating the results into clinical practice, and evaluating outcomes. The strategy may take place solely within a tertiary education environment or may be combined with a clinical setting. Types of outcomes This review will consider studies that include the following outcome measures: evidence-based practice behavior, knowledge, skills, attitudes, self-efficacy (or self-confidence), beliefs, values, intention to use evidence-based practice (future use) and confidence levels. Tools used to measure these outcomes will be assessed for reported validity, reliability and generalizability. Outcomes will be measured during the student’s education period up to graduation. If studies are conducted across different year levels this will be taken into account during analysis and reported accordingly.

User perceived video quality modelling on mobile devices for Vp9 and H265 encoders

This study constructs performance prediction models to estimate the end-user perceived video quality on mobile devices for the latest video encoding techniques –VP9 and H.265. Both subjective and objective video quality assessments were carried out for collecting data and selecting the most desirable predictors. Using statistical regression, two models were generated to achieve 94.5% and 91.5% of prediction accuracies respectively, depending on whether the predictor derived from the objective assessment is involved. These proposed models can be directly used by media industries for video quality estimation, and will ultimately help them to ensure a positive end-user quality of experience on future mobile devices after the adaptation of the latest video encoding technologies.

Learning to lead: The development and testing of a model of leadership learning

Drawing upon an action learning perspective, we hypothesized that a leader’s learning of project leadership skills would be related to facilitative leadership, team reflexivity, and team performance. Secondly, we proposed that new and experienced leaders would differ in the amount they learn from their current and recent experience as project managers, and in the strength of the relationship between their self-reported learning, facilitative leadership, and team reflexivity. We conducted a 1-year longitudinal study of 50 R&D teams, led by 25 new and 25 experienced leaders, with 313 team members and 22 project customers, collecting both quantitative and qualitative data. We found evidence of a significant impact of the leader’s learning on subsequent facilitative leadership and team performance 8 and 12 months later, suggesting a lag between learning leadership skills and translating these skills into leadership behavior. The findings contribute to an understanding of how leaders consolidate their learned experience into facilitative leadership behavior.