Charge transport studies in donor-acceptor block copolymer PDPP-TNT and PC71BM based inverted organic photovoltaic devices processed in room conditions

Diketopyrrolopyrole-naphthalene polymer (PDPP-TNT), a donor-acceptor co-polymer, has shown versatile behavior demonstrating high performances in organic field-effect transistors (OFETs) and organic photovoltaic (OPV) devices. In this paper we report investigation of charge carrier dynamics in PDPP-TNT, and [6,6]-phenyl C71 butyric acid methyl ester (PC71BM) bulk-heterojunction based inverted OPV devices using current density-voltage (J-V) characteristics, space charge limited current (SCLC) measurements, capacitance-voltage (C-V) characteristics, and impedance spectroscopy (IS). OPV devices in inverted architecture, ITO/ZnO/PDPP-TNT:PC71BM/MoO3/Ag, are processed and characterized at room conditions. The power conversion efficiency (PCE) of these devices are measured ∼3.8%, with reasonably good fill-factor 54.6%. The analysis of impedance spectra exhibits electron’s mobility ∼2 × 10−3 cm2V−1s−1, and lifetime in the range of 0.03-0.23 ms. SCLC measurements give hole mobility of 1.12 × 10−5 cm2V−1s−1, and electron mobility of 8.7 × 10−4 cm2V−1s−1.

Generational change in Australian librarianship: viewpoints from Generation X

Australian librarianship faces the same age demographic and generational changes that other western countries and some other professions will soon encounter. As Baby Boomers retire there will be job opportunities and gaps in the profession. Who will take up higher level positions? Will there be enough qualifi ed library staff to fill vacant positions? How should the library industry attract and retain young people? What will be the effect of the ‘“brain drain” on the profession of librarianship resulting from mass retirements where people will take their knowledge, history and experiences with them? Questions such as these will be addressed in this paper, which will focus on Australian library demographic statistics and generational research from Australia and other countries.

A virtual radiation therapy workflow training simulation

Aim Simulation forms an increasingly vital component of clinical skills development in a wide range of professional disciplines. Simulation of clinical techniques and equipment is designed to better prepare students for placement by providing an opportunity to learn technical skills in a “safe” academic environment. In radiotherapy training over the last decade or so this has predominantly comprised treatment planning software and small ancillary equipment such as mould room apparatus. Recent virtual reality developments have dramatically changed this approach. Innovative new simulation applications and file processing and interrogation software have helped to fill in the gaps to provide a streamlined virtual workflow solution. This paper outlines the innovations that have enabled this, along with an evaluation of the impact on students and educators. Method Virtual reality software and workflow applications have been developed to enable the following steps of radiation therapy to be simulated in an academic environment: CT scanning using a 3D virtual CT scanner simulation; batch CT duplication; treatment planning; 3D plan evaluation using a virtual linear accelerator; quantitative plan assessment, patient setup with lasers; and image guided radiotherapy software. Results Evaluation of the impact of the virtual reality workflow system highlighted substantial time saving for academic staff as well as positive feedback from students relating to preparation for clinical placements. Students valued practice in the “safe” environment and the opportunity to understand the clinical workflow ahead of clinical department experience. Conclusion Simulation of most of the radiation therapy workflow and tasks is feasible using a raft of virtual reality simulation applications and supporting software. Benefits of this approach include time-saving, embedding of a case-study based approach, increased student confidence, and optimal use of the clinical environment. Ongoing work seeks to determine the impact of simulation on clinical skills.

Mind the Gap!: Fundraisers and their nonprofit organisational leaders do think differently and this difference matters

Australian fundraisers and their organisational leaders (CEOs and board members) diverge sometimes in how they think about fundraising. In fact, eight key differences emerged in the recent Australian study that sparked this paper. A strong fundraising/leadership accord in attitudes toward fundraising would seem to be important, especially in tightened funding regimes. Both demand and competition for funding beyond the government dollar is growing. Many organisations are moving into community fundraising for the first time due to imperilled government funding. The sophistication of all donation sources is likewise on the rise. These factors add complexity to the fundraising role and to the task of boards and CEOs in managing fundraising strategy and activity. Some variances in professional outlook might be predictable between fundraisers and fundraising organisation leaders. However, the differences found in our study are in areas that potentially affect the organisation’s ability to fill its mission. It is advisable then to ‘mind the gap’ and also to explore it.

A preference-based semantics for CTD reasoning

In [8] the authors developed a logical system based on the definition of a new non-classical connective ⊗ capturing the notion of reparative obligation. The system proved to be appropriate for handling well-known contrary-to-duty paradoxes but no model-theoretic semantics was presented. In this paper we fill the gap and define a suitable possible-world semantics for the system for which we can prove soundness and completeness. The semantics is a preference-based non-normal one extending and generalizing semantics for classical modal logics.

Melt electrospinning of poly(epsilon-caprolactone) scaffolds: Phenomenological observations associated with collection and direct writing

Melt electrospinning and its additive manufacturing analogue, melt electrospinning writing (MEW), are two processes which can produce porous materials for applications where solvent toxicity and accumulation in solution electrospinning are problematic. This study explores the melt electrospinning of poly(ε-caprolactone) (PCL) scaffolds, specifically for applications in tissue engineering. The research described here aims to inform researchers interested in melt electrospinning about technical aspects of the process. This includes rapid fiber characterization using glass microscope slides, allowing influential processing parameters on fiber morphology to be assessed, as well as observed fiber collection phenomena on different collector substrates. The distribution and alignment of melt electrospun PCL fibers can be controlled to a certain degree using patterned collectors to create large numbers of scaffolds with shaped macroporous architectures. However, the buildup of residual charge in the collected fibers limits the achievable thickness of the porous template through such scaffolds. One challenge identified for MEW is the ability to control charge buildup so that fibers can be placed accurately in close proximity, and in many centimeter heights. The scale and size of scaffolds produced using MEW, however, indicate that this emerging process will fill a technological niche in biofabrication.

Theorising the impacts of digitally mediated social interaction on diasporic identity formation: A case of Chinese diaspora in Australia

With the scope of Chinese diaspora in Australia, this paper theorises the impacts of digitally mediated social interaction on diasporic identity formation in the new media landscape. People’s identity is the outcome of their social interactions with other individuals. In the new media landscape, digital media technologies are changing the way in which people communicate with others. On one hand, space and time are unprecedentedly compressed by media technologies so people can maintain more frequent and instant connections with others than before. On the other hand, the digital media technologies have constructed a virtual social space that might withdraw people from their physical social interactions. As we witness today, our social interactions are increasing digitally mediated, in the forms of posts and comments in social network sites, as well as the messages in social apps. As to the diasporic groups, this new media landscape is presenting a challenge to their identity formation. They physically live in the host countries but still keep close social and cultural connections with their homelands. Facilitated by digital media technologies, they are facing two platforms in which they can practice different identity performances: one is the digitally mediated social network; the other is the physical social network. In the case of Chinese diaspora, the situation is more complex due to the language factor and media censorship in Mainland China, which will be articulated in the main text. This paper aims to fill a gap between media studies and diaspora research. Most of existing research on the relationship between diasporic identity and media primarily focuses on the development of ethnic media institutions, and the production and consumption of ethnic media in the pre-digital media context. However, the process of globalisation and digital media technologies are increasing the homogeneity and hybridity of media content worldwide. In this new context, attributing the formation of different identities to the consumption of media content is arguable to some extent. Therefore, the overlapped area of new media studies and diaspora research still has space deserves further investigation.

A methodological survey of future mobility literature: Opportunities for design research

This research establishes that the study of mobility and transportation is multi-disciplinary and highly complex, involving the diverse interplay between infrastructural and psychological factors. Coincidently, a new paradigm in personal mobility is developing. A new generation of mobility solutions is becoming widely available in the form of car and ride sharing services. These services build on the assumption that customers no longer need ownership of a product in order to benefit from it. With the emergence of this new paradigm, this paper presents a methodological review of current practises used by the wider research community. Therefore, this research piece aims to explore methodological approaches involved in the study the effect of community on an individual’s attitudes, perceptions and behaviours of future mobility solutions. The results of this review indicate that the majority of published literature uses quantitative methods as opposed to qualitative and even fewer studies have sought to understand the human factors in these new mobility solutions. This gap in knowledge is a valuable opportunity for design. Inherently qualitative and human focused, design research can fill this gap in knowledge by applying distinctly user-centred methods such as persona design, narrative storytelling, and in-depth observations to discover deeper human insights.

Automated topometric graph generation from floor plan analysis

The world is rich with information such as signage and maps to assist humans to navigate. We present a method to extract topological spatial information from a generic bitmap floor plan and build a topometric graph that can be used by a mobile robot for tasks such as path planning and guided exploration. The algorithm first detects and extracts text in an image of the floor plan. Using the locations of the extracted text, flood fill is used to find the rooms and hallways. Doors are found by matching SURF features and these form the connections between rooms, which are the edges of the topological graph. Our system is able to automatically detect doors and differentiate between hallways and rooms, which is important for effective navigation. We show that our method can extract a topometric graph from a floor plan and is robust against ambiguous cases most commonly seen in floor plans including elevators and stairwells.

Level of contribution of intrinsic risk factors to the management of patients with plantar heel pain

Introduction: Injuries in the lower extremity are considered to have multifactorial causes, whilst people with heel pain represent the most frequent cause of visits to health professionals. Managing these patients can be very difficult. The purpose of this research is to identify key variables which can influence foot health in patients with heel pain. Materials and method: A cross-sectional observational study was carried out with a sample of sixty-two participants recruited from the Educational Welfare Unit of the University of Malaga. The therapists, blinded for the study, fill in the data with anthropometric information and the FPI, while participants fill in the foot health status questionnaire, FHSQ. The most significant results reveal that there is a moderate relation between the clinical variables and the FHSQ commands. The most significant contribution is the BMI in the foot health status questionnaire. Conclusion: The variables which can help manage clinical subjects with heel pain are age, BMI, footwear and FPI (left foot).

Technology and the City: Systems, Applications and Implications

This book investigates and reveals the interplay between smart technologies and cities, a topic that has gained incredible currency in urban studies in recent years. Beginning with an elaboration of the historical significance of technologies in economic growth, social progress and urban development, the author then goes on to introduce the most prominent smart urban information technologies before demonstrating the use of these technologies in various smart urban systems. The book then showcases some of the most significant cases of smart city best practice from across the globe before discussing the magnitude and prospects of smart technologies and systems for our cities and societies. "The interplay between smart urban technologies and city development is a relatively uncharted territory. Technology and the City aims to fill that gap, exploring the growing importance of smart technologies and systems in contemporary cities, and providing an in-depth understanding of both theoretical and practical aspects of smart urban technology adoption, and its implications for our cities. Beginning with an elaboration of the historical significance of technologies in economic growth, social progress and urban development, Yigitcanlar introduces the most prominent smart urban information technologies. The book showcases significant smart city practices from across the globe that uses smart urban technologies and systems most effectively. It explores the role of these technologies and asks how they can be adopted into the planning, development and management processes of cities for sustainable urban futures. This pioneering volume contributes to the conceptualisation and practice of smart technology and system adoption in our cities by disseminating both conceptual and empirical research findings with real-world best practice applications. With a multidisciplinary approach to themes of technology and urban development, this book is a key reference source for scholars, practitioners, consultants, city officials, policymakers and urban technology enthusiasts."--Publisher website

The development of a component to improve the loading safety of bone-anchored prostheses

Use of socket prostheses Currently, for individuals with limb loss, the conventional method of attaching a prosthetic limb relies on a socket that fits over the residual limb. However, there are a number of issues concerning the use of a socket (e.g., blisters, irritation, and discomfort) that result in dissatisfaction with socket prostheses, and these lead ultimately a significant decrease in quality of life. Bone-anchored prosthesis Alternatively, the concept of attaching artificial limbs directly to the skeletal system has been developed (bone anchored prostheses), as it alleviates many of the issues surrounding the conventional socket interface.Bone anchored prostheses rely on two critical components: the implant, and the percutaneous abutment or adapter, which forms the connection for the external prosthetic system (Figure 1). To date, an implant that screws into the long bone of the residual limb has been the most common intervention. However, more recently, press-fit implants have been introduced and their use is increasing. Several other devices are currently at various stages of development, particularly in Europe and the United States. Benefits of bone-anchored prostheses Several key studies have demonstrated that bone-anchored prostheses have major clinical benefits when compared to socket prostheses (e.g., quality of life, prosthetic use, body image, hip range of motion, sitting comfort, ease of donning and doffing, osseoperception (proprioception), walking ability) and acceptable safety, in terms of implant stability and infection. Additionally, this method of attachment allows amputees to participate in a wide range of daily activities for a substantially longer duration. Overall, the system has demonstrated a significant enhancement to quality of life. Challenges of direct skeletal attachment However, due to the direct skeletal attachment, serious injury and damage can occur through excessive loading events such as during a fall (e.g., component damage, peri-prosthetic fracture, hip dislocation, and femoral head fracture). These incidents are costly (e.g., replacement of components) and could require further surgical interventions. Currently, these risks are limiting the acceptance of bone-anchored technology and the substantial improvement to quality of life that this treatment offers. An in-depth investigation into these risks highlighted a clear need to re-design and improve the componentry in the system (Figure 2), to improve the overall safety during excessive loading events. Aim and purposes The ultimate aim of this doctoral research is to improve the loading safety of bone-anchored prostheses, to reduce the incidence of injury and damage through the design of load restricting components, enabling individuals fitted with the system to partake in everyday activities, with increased security and self-assurance. The safety component will be designed to release or ‘fail’ external to the limb, in a way that protects the internal bone-implant interface, thus removing the need for restorative surgery and potential damage to the bone. This requires detailed knowledge of the loads typically experienced by the limb and an understanding of potential overload situations that might occur. Hence, a comprehensive review of the loading literature surrounding bone anchored prostheses will be conducted as part of this project, with the potential for additional experimental studies of the loads during normal activities to fill in gaps in the literature. This information will be pivotal in determining the specifications for the properties of the safety component, and the bone-implant system. The project will follow the Stanford Biodesign process for the development of the safety component.

Pharmacist vaccination – an Australian first, but what was the impact?

Introduction/background/issues The Queensland Pharmacist Immunisation Pilot is Australia’s first to allow pharmacists vaccination. The pilot ran between April 1st 2014 and August 31st 2014, with pharmacists administering influenza vaccination during the flu season. The aim of this work was to investigate the benefits of trained registered pharmacists administering vaccinations in a community pharmacy setting. Methods Participant demographics and previous influenza vaccination experiences were recorded using GuildCare software. Participants also completed a ‘post-vaccination satisfaction survey’ following their influenza vaccination. Results/discussions A total of 10,889 participant records were analysed. Females accounted for 63% of participants, with the majority of participants aged between 45-64 years (53%). Overall, 49% of participants had been vaccinated before, the majority at a GP clinic (60%). Most participants reported receiving their previous influenza vaccination from a nurse (61%). Interestingly, 1% thought a pharmacist had administered their previous vaccination, while 7% were unsure which health professional had administered it. It was also of note that approximately 10% of all participants were eligible to receive a free vaccination from the National Immunisation Program, but still opted to receive their vaccine in a pharmacy. Over 8,000 participants took part in the post-vaccination survey, 93% were happy to receive their vaccination from a pharmacy in the future while 94% would recommend this service to other people. The remaining 7% and 6% respectively had omitted to fill in those questions. Conclusions/implications These findings have helped pave the way for expanding the scope of practice for pharmacists with the aim to increase vaccination rates across Australia. Key message • Scope of practice and ability for health providers like pharmacists to provide services such as vaccination in primary care. • New service delivery to improve access to service, and increase immunisation rates.

The missing link of crime analysis: A systematic approach to testing competing hypotheses

Crime analysts have traditionally received little guidance from academic researchers in key tasks in the analysis process, specifically the testing of multiple hypotheses and evaluating evidence in a scientific fashion. This article attempts to fill this gap by outlining a method (the Analysis of Competing Hypotheses) of systematically analysing multiple explanations for crime problems. The method is systematic, avoids many cognitive errors common in analysis, and is explicit. It is argued that the implementation of this approach makes analytic products audit-able, the reasoning underpinning them transparent, and provides intelligence managers a rational professional development tool for individual analysts.

Influences on novice drivers' speed selection - a systematic review: Application and limitations of theory and methodology

Background Excessive speed is a primary contributing factor to young novice road trauma, including intentional and unintentional speeds above posted limits or too fast for conditions. The objective of this research was to conduct a systematic review of recent investigations into novice drivers’ speed selection, with particular attention to applications and limitations of theory and methodology. Method Systematic searches of peer-reviewed and grey literature were conducted during September 2014. Abstract reviews identified 71 references potentially meeting selection criteria of investigations since the year 2000 into factors that influence (directly or indirectly) actual speed (i.e., behaviour or performance) of young (age <25 years) and/or novice (recently-licensed) drivers. Results Full paper reviews resulted in 30 final references: 15 focused on intentional speeding and 15 on broader speed selection investigations. Both sets identified a range of individual (e.g., beliefs, personality) and social (e.g., peer, adult) influences, were predominantly theory-driven and applied cross-sectional designs. Intentional speed investigations largely utilised self-reports while other investigations more often included actual driving (simulated or ‘real world’). The latter also identified cognitive workload and external environment influences, as well as targeted interventions. Discussion and implications Applications of theory have shifted the novice speed-related literature beyond a simplistic focus on intentional speeding as human error. The potential to develop a ‘grand theory’ of intentional speeding emerged and to fill gaps to understand broader speed selection influences. This includes need for future investigations of vehicle-related and physical environment-related influences and methodologies that move beyond cross-sectional designs and rely less on self-reports.