Using axially loaded MRI to investigate the biomechanics of adolescent idiopathic scoliosis

Introduction. Spinal flexibility measurement is an important aspect of pre-operative clinical assessment in the treatment of Adolescent Idiopathic Scoliosis (AIS). Clinically, curve flexibility is a combined measure for all vertebral levels. We propose that in vivo flexibility for individual spinal joints could provide valuable additional information in planning treatment for scoliosis. Methods. Individual spinal joint flexibility in the coronal plane was measured for a series of AIS patients using axially loaded magnetic resonance imaging. Each patient underwent magnetic resonance imaging in the supine position, with no axial load, and then following application of an axial compressive load equal to half the patient’s bodyweight. Coronal plane disc wedge angles in the unloaded and loaded configurations were measured. Joint moments exerted by the axial compressive load were used to derive estimates of individual joint compliance. Results. Fifteen AIS patients were included in the study (mean clinical Cobb angle 46 degrees, mean age 15.3 years). Mean intra-observer measurement error for endplate inclination was 1.6˚. The mean increase in measured major Cobb angle between unloaded and loaded scans was 7.6˚. For certain spinal levels (+2,+1,-2 relative to the apex) there was a statistically significant relationship between change in wedge angle under load and initial wedge angle, such that initially highly wedged discs demonstrated a smaller change in wedge angle than less wedged discs. Highly wedged discs were observed near the apex of the curve, which corresponded to lower joint compliance in the apical region. Conclusion. Approaches such as this can provide valuable biomechanical data on in vivo spinal biomechanics in AIS. Knowledge of individual joint flexibility may assist surgeons to determine which spinal procedure is most appropriate for a patient, which levels should be included in a spinal fusion and the relative mobility of individual joints in the deformed region of the spine.

A compliant, banded outflow cannula for decreased afterload sensitivity of rotary right ventricular assist devices

Biventricular support with dual rotary ventricular assist devices (VADs) has been implemented clinically with restriction of the right VAD (RVAD) outflow cannula to artificially increase afterload and, therefore, operate within recommended design speed ranges. However, the low preload and high afterload sensitivity of these devices increase the susceptibility of suction events. Active control systems are prone to sensor drift or inaccurate inferred (sensor-less) data, therefore an alternative solution may be of benefit. This study presents the in vitro evaluation of a compliant outflow cannula designed to passively decrease the afterload sensitivity of rotary RVADs and minimize left-sided suction events. A one-way fluid-structure interaction model was initially used to produce a design with suitable flow dynamics and radial deformation. The resultant geometry was cast with different initial cross-sectional restrictions and concentrations of a softening diluent before evaluation in a mock circulation loop. Pulmonary vascular resistance (PVR) was increased from 50 dyne s/cm5 until left-sided suction events occurred with each compliant cannula and a rigid, 4.5 mm diameter outflow cannula for comparison. Early suction events (PVR ∼ 300 dyne s/cm5) were observed with the rigid outflow cannula. Addition of the compliant section with an initial 3 mm diameter restriction and 10% diluent expanded the outflow restriction as PVR increased, thus increasing RVAD flow rate and preventing left-sided suction events at PVR levels beyond 1000 dyne s/cm5. Therefore, the compliant, restricted outflow cannula provided a passive control system to assist in the prevention of suction events with rotary biventricular support while maintaining pump speeds within normal ranges of operation.

The trend toward pre-graduation professional work experience for Australian young planners: Essential experience or essentially exploitation

This paper explores the changing employment expectations that frame the early professional work experiences of young planners in Australia. In particular, it considers the rising popularity of pre-graduation professional work experience as a precursor to formal entry into the workforce as a practising planner. This shift is being driven in part by employer expectations that graduates will already have ‘real world’ and relevant work experience. However, an equally significant driver appears to be a growing desire for early career and graduate planners to find ways to distinguish themselves from their peers in an increasingly tight labour market. Using data from an ongoing research project into the formative work experiences of young people this paper describes the three main types of pre-graduation professional work experience undertaken by young planners. It highlights the potential challenges and benefits of pre-graduation work experience from a legal, social and ethical perspective as well as from the perspective of young planners themselves. The paper concludes by reflecting on the role of the planning profession – employers, peak bodies and planning educators – in managing the tensions between producing ‘work ready’ graduates and safeguarding the employment conditions of early career planning professionals.

Supporting mindful planners in a mindless system: Limitations to the emotional turn in planning practice

Despite widespread acknowledgment within planning scholarship that emotion – both present in knowledge and a form of knowledge – is integral to lived experience and the judgement of planners, it is often sidelined within planning practice. The extent to which mainstream planning has been able or willing to accommodate emotions remains constrained and the emotions of planners and the public remain an unacknowledged but pervasive presence. Antonio Ferreira recently highlighted in this journal the importance of attending to emotions at the level of the individual planner through the concept of mindfulness. We argue this approach must be complemented by an acknowledgement of the structural and institutional limitations of including emotions in planning practice. Drawing from the emotional geographies literature to describe a social-spatial conceptualisation of emotion, we highlight ontological and practical tensions associated with the achievement of the ‘emotional turn’ and advance a more purposeful engagement with emotion in mainstream planning practice.

Can exploring natural recovery from substance misuse in psychosis assist with treatment? A review of current research

Substance misuse in people with psychosis presents significant problems, but trials of treatments to address it show little sustained advantage over control conditions. An examination of mechanisms underpinning unassisted improvements may assist in the refinement of co-morbidity treatments. This study reviewed existing research on natural recovery from substance misuse in people with psychosis. To address this issue, a systematic search identified only 7 articles that fulfilled the criteria. Their results suggest that people with psychosis report similar reasons to change as do non-psychotic groups, although they did not clarify whether the relative frequencies or priority orders were the same. Differences involved issues relating to the disorder and the functional problems faced by this group: receipt of treatment for mental health difficulties, worsening of mental health difficulties, and homelessness. The current research on reasons for change in people with psychosis is sparse and has significant limitations, and as yet it offers little inspiration for new treatments. A more fertile source may prove to be a detailed investigation of successful substance control strategies that are used in self-management by this group.

Feedback and clinical practice improvement: A tool to assist workplace supervisors and students

In work integrated learning, students may report difficulties applying theory learned at university to clinical practice. One contributing factor may be students' inability to engage in meaningful reflection and self-correcting behaviours. This paper reports the evaluation of a tool, process and resources developed to assist students to reflect on feedback and engage in self-assessment. Students were assisted to develop self-assessment skills by reflecting on, and engaging with feedback from previous workplace experiences to develop goals, learning outcomes and strategies to improve performance with mostly positive results. A secondary aim was to identify common learning strategies or barriers that impacted on student outcomes. Four themes emerged from the qualitative data: 1) preparing for clinical learning; 2) relationships and engagement levels; 3) shared awareness, and; 4) developing clinical practice. Overall students felt the tool assisted them to narrow their attention on what needed to be improved. While supervisors believed the tool helped them to focus on specific needs of each student. Common barriers to clinical practice improvement related to a lack of opportunity in some settings, and lack of staff willingness to support students to achieve identified goals. Students and supervisors found the use of the tools beneficial and assisted students to demonstrate a greater understanding of how to apply feedback received to support their learning in the clinical environment.

Measuring route passenger load diversity for capacity and quality of service assessment

This paper develops theory that quantifies transit route passenger-relative load factor and distinguishes it from occupancy load factor. The ratio between these measures is defined as the load diversity coefficient, which as a single measure characterizes the diversity of passenger load factor between route segments according to the origin-destination profile. The relationship between load diversity coefficient and route coefficient of variation in occupancy load factor is quantified. Two tables are provided that enhance passenger capacity and quality of service (QoS) assessment regarding onboard passenger load. The first expresses the transit operator’s perspective of load diversity and the passengers’ perspective of load factor relative to the operator’s, across six service levels corresponding to ranges of coefficient of variation in occupancy load factor. The second interprets the relationships between passenger average travel time and each of passenger-relative load factor and occupancy load factor. The application of this methodology is illustrated using a case study of a premium radial bus route in Brisbane, Australia. The methodology can assist in benchmarking and decision making regarding route and schedule design. Future research will apply value of time to QoS measurement, reflecting perceived passenger comfort through crowding and average time spent aboard. This would also assist in transit service quality econometric modeling.

More equal than others?: Meeting the professional development needs of rural primary and secondary science teachers

It is often assumed that teachers in rural and remote schools are at a disadvantage when it comes to accessing professional development. But is there sufficient evidence to support this assumption? This paper reports findings from two national surveys comparing the professional development priorities of primary and secondary science teachers from metropolitan, provincial and remote schools. The research found that while teachers' unmet needs for some PD opportunities increased significantly with school remoteness, this was not the case for all opportunities. In teasing out the different PD priorities of primary and secondary science teachers, the paper provides evidence to help education authorities and professional organisations address the specific needs of teachers in different locations.

In bed with technology: Challenges and opportunities for sleep tracking

In recent years a variety of mobile apps, wearable technologies and embedded systems have emerged that allow individuals to track the amount and the quality of their sleep in their own beds. Despite the widespread adoption of these technologies, little is known about the challenges that current users face in tracking and analysing their sleep. Hence we conducted a qualitative study to examine the practices of current users of sleep tracking technologies and to identify challenges in current practice. Based on data collected from 5 online forums for users of sleep-tracking technologies, we identified 22 different challenges under the following 4 themes: tracking continuity, trust, data manipulation, and data interpretation. Based on these results, we propose 6 design opportunities to assist researchers and practitioners in designing sleep-tracking technologies.

Antigen-specific CD4 cells assist CD8 T-effector cells in eliminating keratinocytes

Keratinocytes expressing tumor or viral antigens can be eliminated by antigen-primed CD8 cytotoxic T cells. CD4 T-helper cells help induction of CD8 cytotoxic T cells from naive precursors and generation of CD8 T-cell memory. In this study, we show, unexpectedly, that CD4 cells are also required to assist primed CD8 effector T cells in rejection of skin expressing human growth hormone, a neo-self-antigen, in keratinocytes. The requirement for CD4 cells can be substituted by CD40 costimulation. Rejection of skin expressing ovalbumin (OVA), a non-self-antigen, by primed CD8 cytotoxic T cells can in contrast occur without help from antigen-specific CD4 T cells. However, rejection of OVA expressing keratinocytes is helped by antigen-specific CD4 T cells if only low numbers of primed or naive OVA-specific CD8 T cells are available. Effective immunotherapy directed at antigens expressed in squamous cancer may therefore be facilitated by induction of tumor antigen-specific CD4 helper T cells, as well as cytotoxic CD8 T cells.

Mechanism design of ventricular assist device

This research presents an innovative design approach for the development of high efficiency Ventricular assist device that can be used for long-term support a heart failure patient. Computational fluid dynamics (CFD) techniques were applied to the development and intensive analysis to improve the performance and reliability of the pump. From the CFD analysis, a prototype pump was created and evaluated on the mock circulation loop that simulate the human circulatory system environment to evaluate its performance in support varying heart conditions.

Looking out of the void : Scaffolds to assist drama higher research degree students on the path to artist–scholar

In recent years, a number of Australian and international universities have offered the ability to complete postgraduate qualifications using the research frame known as creative practice as research. This has been particularly prevalent in the Drama discipline in the Creative Industries Faculty at Queensland University of Technology (QUT). There has been a noticeable shift away from students undertaking a traditional research Master of Arts (Research) or Doctor of Philosophy to a higher proportion of research higher degree students undertaking research through their creative work. The somewhat ephemeral nature of the theatre and performance practice can generate anxieties for students about how to best represent, analyse and discuss the creative practice within a theoretical frame. The argument in this paper is situated in the experience of two artist-scholars who undertook their studies at QUT while under principal supervision of the author and explores the research scaffolds that supervisors in Drama at QUT have developed to assist research higher degree students to navigate the tricky persona of artist–scholar.

A model of factors that influence meeting the needs of family with a relative in ICU

This thesis developed a model of factors that influence meeting the needs of family with a relative admitted to an adult intensive care unit. The results from the model indicate that several variables are significant in meeting the needs of families in ICU. The factors identified in this study should be considered when planning future intervention studies or implementing interventions into ICU clinical practice. Meeting the needs of families is an integral part of caring for a critically ill patient. ICU staff can minimise this stressful time for relatives by anticipating and addressing family needs.