Obligatory dangerousness criteria in the involuntary commitment and treatment provisions of Australian mental health legislation

Abstract Objective Involuntary commitment and treatment (IC&T) of people affected by mental illness may have reference to considerations of dangerousness and/or need for care. While attempts have been made to classify mental health legislation according to whether IC&T has obligatory dangerousness criteria, there is no standardised procedure for making classification decisions. The aim of this study was to develop and trial a classification procedure and apply it to Australia's mental health legislation. Method We developed benchmarks for ‘need for care’ and ‘dangerousness’ and applied these benchmarks to classify the mental health legislation of Australia's 8 states and territories. Our focus was on civil commitment legislation rather than criminal commitment legislation. Results One state changed its legislation during the course of the study resulting in two classificatory exercises. In our initial classification, we were able to classify IC&T provisions in legislation from 6 of the 8 jurisdictions as being based on either ‘need for care’ or ‘dangerousness’. Two jurisdictions used a terminology that was outside the established benchmarks. In our second classification, we were also able to successfully classify IC&T provisions in 6 of the 8 jurisdictions. Of the 6 Acts that could be classified, all based IC&T on ‘need for care’ and none contained mandatory ‘dangerousness’ criteria. Conclusions The classification system developed for this study provided a transparent and probably reliable means of classifying 75% of Australia's mental health legislation. The inherent ambiguity of the terminology used in two jurisdictions means that further development of classification may not be possible until the meaning of the terms used has been addressed in case law. With respect to the 6 jurisdictions for which classification was possible, the findings suggest that Australia's mental health legislation relies on ‘need for care’ and not on ‘dangerousness’ as the guiding principle for IC&T. Keywords: Involuntary commitment; Mental health legislation; Dangerousness; Australia

Recovery-based practice: do we know what we mean or mean what we know?

The concept of recovery is now widely promoted as the guiding principle for the provision of mental health services in Australia and overseas. While there is increasing pressure on service providers to ensure that services are recovery oriented, the way in which recovery-based practice is operationalized at the coalface presents a number of challenges. These are discussed in the context of five key questions that address (i) the appropriateness of recovery as a focus for service delivery, (ii) the distinction between recovery as a process and an outcome, (iii) the assessment of recovery initiatives, (iv) the alignment of recovery with current service delivery models, and (v) the risks associated with recovery-based practice. It is argued that these questions provide a framework for a debate that must extend beyond patients and providers of mental health services to the broader public, whose attitudes will ultimately determine the possibilities and limits of recovery-oriented practice.

The certainty of tax in insolvency : where does the ATO fit?

There are several ways that the Commissioner of Taxation may indirectly obtain priority over unsecured creditors. This is contrary to the principle of pari passu, a principle endorsed by the 1988 Harmer Report as one that is a fundamental objective of the law of insolvency. As the law and practice of Australia's taxation regime evolves, the law is being drafted in a manner that is inconsistent with the principle of pari passu. The natural consequence of this development is that it places at risk the capacity of corporate and bankruptcy laws to coexist and cooperate with taxation laws. This article posits that undermining the consistency of Commonwealth legislative objectives is undesirable. The authors suggest that one means of addressing the inconsistency is to examine whether there is a clearly aligned theoretical basis for the development of these areas of law and the extent that alignment addresses these inconsistencies. This forms the basis for the recommendations made around such inconsistencies using statutory priorities as an exemplar.

Insurance and the law of negligence : an influential or irrelevant persuader?

This article examines, from both within and outside the context of compulsory third party motor vehicle insurance, the different academic and judicial perspectives regarding the relevance of insurance to the imposition of negligence liability via the formulation of legal principle. In particular, the utility of insurance in setting the standard of care held owing by a learner driver to an instructor in Imbree v McNeilly is analysed and the implications of this High Court decision, in light of current jurisprudential argument and for other principles of negligence liability, namely claimant vulnerability, are considered. It concludes that ultimately one’s stance as to the relevance, or otherwise, of insurance to the development of the common law of negligence will be predominately influenced by normative views of torts’ function as an instrument of corrective or distributive justice.

Advance directives, autonomy and the refusal of life-sustaining medical treatment

As Australian society 1s agemg, individuals are increasingly concerned about managing their future, including making decisions about the medical treatment they may wish to receive or refuse if they lose decision-making capacity. To date, there has been relatively little research into the extent to which legal regulation allows competent adults to make advance refusals of life-sustaining medical treatment that will bind health professionals and others when a decision needs to be made at a future time. This thesis aims to fill this gap in the research by presenting the results of research into the legal regulation of advance directives that refuse life-sustaining medical treatment. In the five papers that comprise this thesis, the law that governs this area is examined, and the ethical principle of autonomy is used to critically evaluate that law. The principal finding of this research is that the current scheme of regulation is ineffective to adequately promote the right of a competent adult to make binding advance directives about refusal of medical treatment. The research concludes that legislation should be enacted to enable individuals to complete an advance directive, only imposing restrictions to the extent that this is necessary to promote individual autonomy. The thesis first examines the principle of autonomy upon which the common law (and some statutory law) is expressed to be based, to determine whether that principle is an appropriate one to underpin regulation. 1 The finding of the research is that autonomy can be justified as an organising principle on a number of grounds: it is consistent with the values of a liberal democracy; over recent decades, it is a principle that has been even more prominent within the discipline of medical ethics; and it is the principle which underpins the legal regulation of a related topic, namely the contemporaneous refusal of medical treatment. Next, the thesis reviews the common law to determine whether it effectively achieves the goal of promoting autonomy by allowing a competent adult to make an advance directive refusing treatment that will operate if he or she later loses decision-making capacity. 2 This research finds that conunon law doctrine, as espoused by the judiciary, prioritises individual choice by recognising valid advance directives that refuse treatment as binding. However, the research also concludes that the common law, as applied by the judiciary in some cases, may not be effective to promote individual autonomy, as there have been a number of circumstances where advance directives that refuse treatment have not been followed. The thesis then examines the statutory regimes in Australia that regulate advance directives, with a focus on the regulation of advance refusals of life-sustaining medical treatment.3 This review commences with an examination ofparliamentary debates to establish why legislation was thought to be necessary. It then provides a detailed review of all of the statutory regimes, the extent to which the legislation regulates the form of advance directives, and the circumstances in which they can be completed, will operate and can be ignored by medical professionals. The research finds that legislation was enacted mainly to clarify the common law and bring a level of certainty to the field. Legislative regimes were thought to provide medical professionals with the assurance that compliance with an advance directive that refuses life-sustaining medical treatment will not expose them to legal sanction. However, the research also finds that the legislation places so many restrictions on when an advance directive refusing treatment can be made, or will operate, that they have not been successful in promoting individual autonomy.

Refusal of medical treatment : a child's prerogative?

Society has a need for children to be able to make health care decisions. Homeless children need access to health care. Parents may not be accessible or competent to consent to their child’s health care. The familial relationship may have broken down. Children may not want their parents to know about drug, alcohol or pregnancy related issues. There is legal and academic support for the right of children to make autonomous decisions with respect to their health care. However what these decisions cover and who can make them is not clear. Whether or not a minor has capacity and is therefore competent to consent to medical treatment is a question of law. Some states of Australia have enacted legislation, while others rely on the common law to determine this issue. At common law a minor is capable of giving consent to medical treatment when he or she achieves a sufficient understanding and intelligence to be able to understand fully what is proposed. Known as ‘Gillick competence’ this is a well known principle of law. The question posed by this paper is whether the decision of a ‘Gillick competent’ child can and should be overridden by the court?

Implementable efficient time and energy consumption trajectories design for an autonomous underwater vehicle

In this paper we consider the implementation of time and energy efficient trajectories onto a test-bed autonomous underwater vehicle. The trajectories are losely connected to the results of the application of the maximum principle to the controlled mechanical system. We use a numerical algorithm to compute efficient trajectories designed using geometric control theory to optimize a given cost function. Experimental results are shown for the time minimization problem.

Sub-tropical high-density, low rise residential buildings: case study 3

The case study 3 team viewed the mitigation of noise and air pollution generated in the transport corridor that borders the study site to be a paramount driver of the urban design solution. These key urban planning strategies were adopted: * Spatial separation from transport corridor pollution source. A linear green zone and environmental buffer was proposed adjacent to the transport corridor to mitigate the environmental noise and air quality impacts of the corridor, and to offer residents opportunities for recreation * Open space forming the key structural principle for neighbourhood design. A significant open space system underpins the planning and manages surface water flows. * Urban blocks running on east-west axis. The open space rationale emphasises an east-west pattern for local streets. Street alignment allows for predominantly north-south facing terrace type buildings which both face the street and overlook the green courtyard formed by the perimeter buildings. The results of the ESD assessment of the typologies conclude that the design will achieve good outcomes through: * Lower than average construction costs compared with other similar projects * Thermal comfort; A good balance between daylight access and solar gains is achieved * The energy rating achieved for the units is 8.5 stars.

Utilizing industry-led innovation capacity to enhance supply chain performance : an empirical study

A fundamental principle of the resource-based (RBV) of the firm is that the basis for a competitive advantage lies primarily in the application of bundles of valuable strategic capabilities and resources at a firm’s or supply chain’s disposal. These capabilities enact research activities and outputs produced by industry funded R&D bodies. Such industry lead innovations are seen as strategic industry resources, because effective utilization of industry innovation capacity by sectors such as the Australian beef industry are critical, if productivity levels are to increase. Academics and practitioners often maintain that dynamic supply chains and innovation capacity are the mechanisms most likely to deliver performance improvements in national industries.. Yet many industries are still failing to capitalise on these strategic resources. In this research, we draw on the resource-based view (RBV) and embryonic research into strategic supply chain capabilities. We investigate how two strategic supply chain capabilities (supply chain performance differential capability and supply chain dynamic capability) influence industry-led innovation capacity utilization and provide superior performance enhancements to the supply chain. In addition, we examine the influence of size of the supply chain operative as a control variable. Results indicate that both small and large supply chain operatives in this industry believe these strategic capabilities influence and function as second-order latent variables of this strategic supply chain resource. Additionally respondents acknowledge size does impacts both the amount of influence these strategic capabilities have and the level of performance enhancement expected by supply chain operatives from utilizing industry-led innovation capacity. Results however also indicate contradiction in this industry and in relation to existing literature when it comes to utilizing such e-resources.

Flexible high voltage pulsed power supply for plasma applications

Demands for delivering high instantaneous power in a compressed form (pulse shape) have widely increased during recent decades. The flexible shapes with variable pulse specifications offered by pulsed power have made it a practical and effective supply method for an extensive range of applications. In particular, the release of basic subatomic particles (i.e. electron, proton and neutron) in an atom (ionization process) and the synthesizing of molecules to form ions or other molecules are among those reactions that necessitate large amount of instantaneous power. In addition to the decomposition process, there have recently been requests for pulsed power in other areas such as in the combination of molecules (i.e. fusion, material joining), gessoes radiations (i.e. electron beams, laser, and radar), explosions (i.e. concrete recycling), wastewater, exhausted gas, and material surface treatments. These pulses are widely employed in the silent discharge process in all types of materials (including gas, fluid and solid); in some cases, to form the plasma and consequently accelerate the associated process. Due to this fast growing demand for pulsed power in industrial and environmental applications, the exigency of having more efficient and flexible pulse modulators is now receiving greater consideration. Sensitive applications, such as plasma fusion and laser guns also require more precisely produced repetitive pulses with a higher quality. Many research studies are being conducted in different areas that need a flexible pulse modulator to vary pulse features to investigate the influence of these variations on the application. In addition, there is the need to prevent the waste of a considerable amount of energy caused by the arc phenomena that frequently occur after the plasma process. The control over power flow during the supply process is a critical skill that enables the pulse supply to halt the supply process at any stage. Different pulse modulators which utilise different accumulation techniques including Marx Generators (MG), Magnetic Pulse Compressors (MPC), Pulse Forming Networks (PFN) and Multistage Blumlein Lines (MBL) are currently employed to supply a wide range of applications. Gas/Magnetic switching technologies (such as spark gap and hydrogen thyratron) have conventionally been used as switching devices in pulse modulator structures because of their high voltage ratings and considerably low rising times. However, they also suffer from serious drawbacks such as, their low efficiency, reliability and repetition rate, and also their short life span. Being bulky, heavy and expensive are the other disadvantages associated with these devices. Recently developed solid-state switching technology is an appropriate substitution for these switching devices due to the benefits they bring to the pulse supplies. Besides being compact, efficient, reasonable and reliable, and having a long life span, their high frequency switching skill allows repetitive operation of pulsed power supply. The main concerns in using solid-state transistors are the voltage rating and the rising time of available switches that, in some cases, cannot satisfy the application’s requirements. However, there are several power electronics configurations and techniques that make solid-state utilisation feasible for high voltage pulse generation. Therefore, the design and development of novel methods and topologies with higher efficiency and flexibility for pulsed power generators have been considered as the main scope of this research work. This aim is pursued through several innovative proposals that can be classified under the following two principal objectives. • To innovate and develop novel solid-state based topologies for pulsed power generation • To improve available technologies that have the potential to accommodate solid-state technology by revising, reconfiguring and adjusting their structure and control algorithms. The quest to distinguish novel topologies for a proper pulsed power production was begun with a deep and through review of conventional pulse generators and useful power electronics topologies. As a result of this study, it appears that efficiency and flexibility are the most significant demands of plasma applications that have not been met by state-of-the-art methods. Many solid-state based configurations were considered and simulated in order to evaluate their potential to be utilised in the pulsed power area. Parts of this literature review are documented in Chapter 1 of this thesis. Current source topologies demonstrate valuable advantages in supplying the loads with capacitive characteristics such as plasma applications. To investigate the influence of switching transients associated with solid-state devices on rise time of pulses, simulation based studies have been undertaken. A variable current source is considered to pump different current levels to a capacitive load, and it was evident that dissimilar dv/dts are produced at the output. Thereby, transient effects on pulse rising time are denied regarding the evidence acquired from this examination. A detailed report of this study is given in Chapter 6 of this thesis. This study inspired the design of a solid-state based topology that take advantage of both current and voltage sources. A series of switch-resistor-capacitor units at the output splits the produced voltage to lower levels, so it can be shared by the switches. A smart but complicated switching strategy is also designed to discharge the residual energy after each supply cycle. To prevent reverse power flow and to reduce the complexity of the control algorithm in this system, the resistors in common paths of units are substituted with diode rectifiers (switch-diode-capacitor). This modification not only gives the feasibility of stopping the load supply process to the supplier at any stage (and consequently saving energy), but also enables the converter to operate in a two-stroke mode with asymmetrical capacitors. The components’ determination and exchanging energy calculations are accomplished with respect to application specifications and demands. Both topologies were simply modelled and simulation studies have been carried out with the simplified models. Experimental assessments were also executed on implemented hardware and the approaches verified the initial analysis. Reports on details of both converters are thoroughly discussed in Chapters 2 and 3 of the thesis. Conventional MGs have been recently modified to use solid-state transistors (i.e. Insulated gate bipolar transistors) instead of magnetic/gas switching devices. Resistive insulators previously used in their structures are substituted by diode rectifiers to adjust MGs for a proper voltage sharing. However, despite utilizing solid-state technology in MGs configurations, further design and control amendments can still be made to achieve an improved performance with fewer components. Considering a number of charging techniques, resonant phenomenon is adopted in a proposal to charge the capacitors. In addition to charging the capacitors at twice the input voltage, triggering switches at the moment at which the conducted current through switches is zero significantly reduces the switching losses. Another configuration is also introduced in this research for Marx topology based on commutation circuits that use a current source to charge the capacitors. According to this design, diode-capacitor units, each including two Marx stages, are connected in cascade through solid-state devices and aggregate the voltages across the capacitors to produce a high voltage pulse. The polarity of voltage across one capacitor in each unit is reversed in an intermediate mode by connecting the commutation circuit to the capacitor. The insulation of input side from load side is provided in this topology by disconnecting the load from the current source during the supply process. Furthermore, the number of required fast switching devices in both designs is reduced to half of the number used in a conventional MG; they are replaced with slower switches (such as Thyristors) that need simpler driving modules. In addition, the contributing switches in discharging paths are decreased to half; this decrease leads to a reduction in conduction losses. Associated models are simulated, and hardware tests are performed to verify the validity of proposed topologies. Chapters 4, 5 and 7 of the thesis present all relevant analysis and approaches according to these topologies.

Inclusive practice in kindergarten

Professional Development module video interview What does the principle of inclusive practice look/sound/feel like in the early years setting? (7min09sec; 15 MB) What do you see as the role of the teacher and support personnel in terms of inclusive practice? Why is collaboration so important? (3min; 6 MB) What communication strategies would help support inclusive practices with parents? (4min; 9 MB)

Physicality in Australian Patent Law

It is generally understood that the patent system exists to encourage the conception and disclosure of new and useful inventions embodied in machines and other physical devices, along with new methods that physically transform matter from one state to another. What is not well understood is whether, and to what extent, the patent system is to encourage and protect the conception and disclosure of inventions that are non-physical methods – namely those that do not result in a physical transformation of matter. This issue was considered in Grant v Commissioner of Patents. In that case the Full Court of the Federal Court of Australia held that an invention must involve a physical effect or transformation to be patentable subject matter. In doing so, it introduced a physicality requirement into Australian law. What this article seeks to establish is whether the court’s decision is consistent with the case law on point. It does so by examining the key common law cases that followed the High Court’s watershed decision in National Research Development Corporation v Commissioner of Patents, the undisputed authoritative statement of principle in regard to the patentable subject matter standard in Australia. This is done with a view to determining whether there is anything in those cases that supports the view that the Australian patentable subject matter test contains a physicality requirement.

Optimal allocation of water in village irrigation systems of Sri Lanka

This PhD study examines whether water allocation becomes more productive when it is re-allocated from 'low' to 'high' efficient alternative uses in village irrigation systems (VISs) in Sri Lanka. Reservoir-based agriculture is a collective farming economic activity, which inter-sectoral allocation of water is assumed to be inefficient due to market imperfections and weak user rights. Furthermore, the available literature shows that a „head-tail syndrome. is the most common issue for intra-sectoral water management in „irrigation. agriculture. This research analyses the issue of water allocation by using primary data collected from two surveys of 460 rice farmers and 325 fish farming groups in two administrative districts in Sri Lanka. Technical efficiency estimates are undertaken for both rice farming and culture-based fisheries (CBF) production. The equi-marginal principle is applied for inter and intra-sectoral allocation of water. Welfare benefits of water re-allocation are measured through consumer surplus estimation. Based on these analyses, the overall findings of the thesis can be summarised as follows. The estimated mean technical efficiency (MTE) for rice farming is 73%. For CBF production, the estimated MTE is 33%. The technical efficiency distribution is skewed to the left for rice farming, while it skewed to the right for CBF production. The results show that technical efficiency of rice farming can be improved by formalising transferability of land ownership and, therefore, water user rights by enhancing the institutional capacity of Farmer Organisations (FOs). Other effective tools for improving technical efficiency of CBF production are strengthening group stability of CBF farmers, improving the accessibility of official consultation, and attracting independent investments. Inter-sectoral optimal allocation shows that the estimated inefficient volume of water in rice farming, which can be re-allocated for CBF production, is 32%. With the application of successive policy instruments (e.g., a community transferable quota system and promoting CBF activities), there is potential for a threefold increase in marginal value product (MVP) of total reservoir water in VISs. The existing intra-sectoral inefficient volume of water use in tail-end fields and head-end fields can potentially be removed by reducing water use by 10% and 23% respectively and re-allocating this to middle fields. This re-allocation may enable a twofold increase in MVP of water used in rice farming without reducing the existing rice output, but will require developing irrigation practices to facilitate this re-allocation. Finally, the total productivity of reservoir water can be increased by responsible village level institutions and primary level stakeholders (i.e., co-management) sharing responsibility of water management, while allowing market forces to guide the efficient re-allocation decisions. This PhD has demonstrated that instead of farmers allocating water between uses haphazardly, they can now base their decisions on efficient water use with a view to increasing water productivity. Such an approach, no doubt will enhance farmer incomes and community welfare.

Teachers' conceptions of how to engage students through inquiry learning : foundations for STEM

The advocacy for inquiry-based learning in contemporary curricula assumes the principle that students learn in their own way by drawing on direct experience fostered by the teacher. That students should be able to discover answers themselves through active engagement with new experiences was central to the thinking of eminent educators such as Pestalozzi, Dewey and Montessori. However, even after many years of research and practice, inquiry learning as a referent for teaching still struggles to find expression in the average teachers' pedagogy. This study drew on interview data from 20 primary teachers. A phenomenographic analysis revealed three conceptions of teaching that support inquiry learning in science in the primary years of schooling: (a) The Experience-centred conception where teachers focused on providing interesting sensory experiences to students; (b) The Problem-centred conception where teachers focused on challenging students with engaging problems; and (c) The Question-centred conception where teachers focused on helping students to ask and answer their own questions. Understanding teachers' conceptions of teaching has implications for both the enactment of inquiry teaching in the classroom as well as the uptake of new teaching behaviours during professional development, with enhanced outcomes for engaging students in STEM.

Capacity-building workshops on the responsibility to protect (R2P) and the protection of civilians (POC) in armed conflict - Summary Report

In June 2011, a research project team from the Institute for Ethics, Governance and Law (IEGL), Queensland University of Technology, the United Nations University, and the Australian Government’s Asia Pacific Civil-Military Centre of Excellence (APCMCOE) held three Capacity-Building Workshops (the Workshops) on the Responsibility to Protect (R2P) and the Protection of Civilians (POC) in Armed Conflict in Manila, Kuala Lumpur, and Jakarta. The research project is funded by the Australian Responsibility to Protect Fund, with support from APCMCOE. Developments in Libya and Cote d’Ivoire and the actions of the United Nations Security Council have given new significance to the relationship between R2P and POC, providing impetus to the relevance and application of the POC principle recognised in numerous Security Council resolutions, and the R2P principle, which was recognised by the United Nations General Assembly in 2005 and, now, by the Security Council. The Workshops considered the relationship between R2P and POC. The project team presented the preliminary findings of their study and sought contributions and feedback from Workshop participants. Prior to the Workshops, members of the project team undertook interviews with UN offices and agencies, international organisations (IOs) and non-government organisations (NGOs) in Geneva and New York as part of the process of mapping the relationship between R2P and POC. Initial findings were considered at an Academic-Practitioner Workshop held at the University of Sydney in November 2010. In addition to an extensive literature review and a series of academic publications, the project team is preparing a practical guidance text (the Guide) on the relationship between R2P and POC to assist the United Nations, governments, regional bodies, IOs and NGOs in considering and applying appropriate protection strategies. It is intended that the Guide be presented to the United Nations Secretariat in New York in early 2012. The primary aim of the Workshops was to test the project’s initial findings among an audience of diplomats, military, police, civilian policy-makers, practitioners, researchers and experts from within the region. Through dialogue and discussion, the project team gathered feedback – comments, questions, critique and suggestions – to help shape the development of practical guidance about when, how and by whom R2P and POC might be implemented.