Improved fabrication of melt electrospun tissue engineering scaffolds using direct writing and advanced electric field control

Direct writing melt electrospinning is an additive manufacturing technique capable of the layer-by-layer fabrication of highly ordered 3d tissue engineering scaffolds from micron-diameter fibres. The utility of these scaffolds, however, is limited by the maximum achievable height of controlled fibre deposition, beyond which the structure becomes increasingly disordered. A source of this disorder is charge build-up on the deposited polymer producing unwanted coulombic forces. In this study we introduce a novel melt electrospinning platform with dual voltage power supplies to reduce undesirable charge effects and improve fibre deposition control. We produced and characterised several 90° cross-hatched fibre scaffolds using a range of needle/collector plate voltages. Fibre thickness was found to be sensitive only to overall potential and invariant to specific tip/collector voltage. We also produced ordered scaffolds up to 200 layers thick (fibre spacing 1 mm, diameter 40 μm) and characterised structure in terms of three distinct zones; ordered, semi-ordered and disordered. Our in vitro analysis indicates successful cell attachment and distribution throughout the scaffolds, with little evidence of cell death after seven days. This study demonstrates the importance of electrostatic control for reducing destabilising polymer charge effects and enabling the fabrication of morphologically suitable scaffolds for tissue engineering.

Antidepressant direct-to-consumer prescription drug advertising and public stigma of depression : the mediating role of perceived prevalence of depression

This study examines whether memory of antidepressant direct-to-consumer (DTC) prescription drug advertising is associated with the public stigma attached to depression. Results indicate that those who better remember antidepressant DTC ads tend to have a higher perceived prevalence of depression (i.e., more people suffer from depression). And, the perceived prevalence of depression is inversely associated with the public stigma toward depression. That is, those who have a higher perceived prevalence of depression report that they are more supportive of and comfortable with people who have depression. The results suggest that the perceived prevalence of depression is a mediating variable that accounts for the relationship between memory of antidepressant DTC ads and the public stigma toward depression. The implications and limitations of the study, as an exploratory investigation, are discussed.

An improved robust field weakening algorithm for direct torque controlled synchronous reluctance motor drives

This paper presents an improved field weakening algorithm for synchronous reluctance motor (RSMs) drives. The proposed algorithm is robust to the variations in the machine d- and q-axes inductances. The transition between the maximum torque per ampere (MTPA), current and voltage limits as well as the maximum torque per flux (MTPF) trajectories is smooth. The proposed technique is combined with the direct torque control method to attain a high performance drive in the field weakening region. Simulation and experimental results are supplemented to verify the effectiveness of the proposed approach.

Direct measurement as a tool for assessing the accuracy of inverse dynamics

The understanding of the loads generated within the prosthetic leg can aid engineers in the design of components and clinicians in the process of rehabilitation. Traditional methods to assess these loads have relied on inverse dynamics. This indirect method estimates the applied load using video recordings and force-plates located at a distance from the region of interest, such as the base of the residuum. The well-known limitations of this method are related to the accuracy of this recursive model and the experimental conditions required (Frossard et al., 2003). Recent developments in sensors (Frossard et al., 2003) and prosthetic fixation (Brånemark et al., 2000) permit the direct measurement of the loads applied on the residuum of transfemoral amputees. In principle, direct measurement should be an appropriate tool for assessing the accuracy of inverse dynamics. The purpose of this paper is to determine the validity of this assumption. The comparative variable used in this study is the velocity of the relative body center of mass (VCOM(t)). The relativity is used to align the static (w.r.t. position) force plate measurement with the dynamic load cell measurement.

Review of direct measurement of inner prosthesis loading in transfemoral amputation: Potential benefits for evidence-based practice

The understanding of the load applied on the residuum through the prosthesis of individuals with transfemoral amputation (TFA) is essential to address a number of concerns that could strongly reduce their quality of life (e.g., residuum skin lesion, prosthesis fitting, alignment). This inner prosthesis loading could be estimated using a typical gait laboratory relying on inverse dynamics equations. Alternative, technological advances proposed over the last decade enabled direct measurement of this kinetic information in a broad variety of situations that could potentially be more relevant in clinical settings. The purposes of this presentation are (A) to review the literature about recent developments in measure and analyses of inner prosthesis loading of TFA, and (B) to extract information that could potentially contribute to a better evidence-based practice.

Book review: Politics and the media in twenty-first century Indonesia: Decade of democracy

This is the third (but first edited) volume in Sen and Hill’s corpus on Indonesian media. An anthology built from contributions to a 2006 workshop, it is necessarily more fragmented than the editors’ earlier monographs. While this fragmented character helps to evoke a fractured context, it also makes for unwieldiness...

Participatory action research for civic engagement

The future of civic engagement is characterised by both technological innovation as well as new technological user practices that are fuelled by trends towards mobile, personal devices; broadband connectivity; open data; urban interfaces; and, cloud computing. These technology trends are progressing at a rapid pace, and have led global technology vendors to package and sell the ‘Smart City’ as a centralized service delivery platform predicted to optimize and enhance cities’ key performance indicators – and generate a profitable market. The top-down deployment of these large and proprietary technology platforms have helped sectors such as energy, transport, and healthcare to increase efficiencies. However, an increasing number of scholars and commentators warn of another ‘IT bubble’ emerging. Along with some city leaders, they argue that the top-down approach does not fit the governance dynamics and values of a liberal democracy when applied across sectors. A thorough understanding is required, of the socio-cultural nuances of how people work, live, play across different environments, and how they employ social media and mobile devices to interact with, engage in, and constitute public realms. Although the term ‘slacktivism’ is sometimes used to denote a watered down version of civic engagement and activism that is reduced to clicking a ‘Like’ button and signing online petitions, we believe that we are far from witnessing another Biedermeier period that saw people focus on the domestic and the non-political. There is plenty of evidence to the contrary, such as post-election violence in Kenya in 2008, the Occupy movements in New York, Hong Kong and elsewhere, the Arab Spring, Stuttgart 21, Fukushima, the Taksim Gezi Park in Istanbul, and the Vinegar Movement in Brazil in 2013. These examples of civic action shape the dynamics of governments, and in turn, call for new processes to be incorporated into governance structures. Participatory research into these new processes across the triad of people, place and technology is a significant and timely investment to foster productive, sustainable, and livable human habitats. With this chapter, we want to reframe the current debates in academia and priorities in industry and government to allow citizens and civic actors to take their rightful centerpiece place in civic movements. This calls for new participatory approaches for co-inquiry and co-design. It is an evolving process with an explicit agenda to facilitate change, and we propose participatory action research (PAR) as an indispensable component in the journey to develop new governance infrastructures and practices for civic engagement. This chapter proposes participatory action research as a useful and fitting research paradigm to guide methodological considerations surrounding the study, design, development, and evaluation of civic technologies. We do not limit our definition of civic technologies to tools specifically designed to simply enhance government and governance, such as renewing your car registration online or casting your vote electronically on election day. Rather, we are interested in civic media and technologies that foster citizen engagement in the widest sense, and particularly the participatory design of such civic technologies that strive to involve citizens in political debate and action as well as question conventional approaches to political issues (DiSalvo, 2012; Dourish, 2010; Foth et al., 2013). Following an outline of some underlying principles and assumptions behind participatory action research, especially as it applies to cities, we will critically review case studies to illustrate the application of this approach with a view to engender robust, inclusive, and dynamic societies built on the principles of engaged liberal democracy. The rationale for this approach is an alternative to smart cities in a ‘perpetual tomorrow,’ (cf. e.g. Dourish & Bell, 2011), based on many weak and strong signals of civic actions revolving around technology seen today. It seeks to emphasize and direct attention to active citizenry over passive consumerism, human actors over human factors, culture over infrastructure, and prosperity over efficiency. First, we will have a look at some fundamental issues arising from applying simplistic smart city visions to the kind of a problem a city is (cf. Jacobs, 1961). We focus on the touch points between “the city” and its civic body, the citizens. In order to provide for meaningful civic engagement, the city must provide appropriate interfaces.

Direct measurement of prosthetic loading for evidence-based practice

The demand for an evidence-based clinical practice involving lower limb amputees is increasing. Some of the critical care decisions are related to the loading applied on the residuum partially responsible for comfort and functional outcome. This loading can be assessed using inverse dynamics equations. Typically, this method requires a gait laboratory (e.g., 3D motion analysis system, force-plates). It is mainly suited for the analysis only few steps of walking while being expensive and labour intensive. However, recent scientific and industrial developments demonstrated that discrete and light portable sensors can be placed within the prosthesis to measure accurately the loading during an unlimited number of steps and activities of daily living. Several studies indicated that method based on direct measurements might provide more realistic results. Furthermore, it is a user-friendly method more accessible to clinicians, such as prosthetists. The purpose of this symposium will be to give an overview of these additional opportunities for clinicians to obtain relevant data for evidence-based practice. The three main aims will be: • To present some of the equipment used for direct measurements, • To propose ways to analyse some key data sets, • To give some practical example of data sets for transtibial and transfemoral amputees.

Do pollutions deter foreign direct investment in China?

The scale of environmental problems in China is clearly evident. This paper analyses foreign direct investment (FDI) in China with a finite mixture model, also known as latent class model to understand the relationship between FDI and several pollutions. This is used to regresses FDI as function covariates including pollutants. The results reveal that FDI is affected by pollutants. There are cases reducing pollution deters foreign investment in China.

Direct mapping of hippocampal surfaces with intrinsic shape context

We propose in this paper a new method for the mapping of hippocampal (HC) surfaces to establish correspondences between points on HC surfaces and enable localized HC shape analysis. A novel geometric feature, the intrinsic shape context, is defined to capture the global characteristics of the HC shapes. Based on this intrinsic feature, an automatic algorithm is developed to detect a set of landmark curves that are stable across population. The direct map between a source and target HC surface is then solved as the minimizer of a harmonic energy function defined on the source surface with landmark constraints. For numerical solutions, we compute the map with the approach of solving partial differential equations on implicit surfaces. The direct mapping method has the following properties: (1) it has the advantage of being automatic; (2) it is invariant to the pose of HC shapes. In our experiments, we apply the direct mapping method to study temporal changes of HC asymmetry in Alzheimer's disease (AD) using HC surfaces from 12 AD patients and 14 normal controls. Our results show that the AD group has a different trend in temporal changes of HC asymmetry than the group of normal controls. We also demonstrate the flexibility of the direct mapping method by applying it to construct spherical maps of HC surfaces. Spherical harmonics (SPHARM) analysis is then applied and it confirms our results on temporal changes of HC asymmetry in AD.

Direct observations of pedestrian unsafe crossing at urban Australian level crossings

The number of pedestrian victims at Australian and foreign level crossings has remained stable over the past decade and it continues to be a significant problem. To examine the factors contributing to pedestrians’ unsafe crossing behaviours, direct observations were conducted at three black spot urban level crossings in Brisbane for a total of 45 h during morning and afternoon peak. In total, 129 pedestrians transgressed the active controls. More transgressions were observed at the crossings located in more populated suburbs in close proximity to large shopping centres and school zones, whereas the smallest number of transgressions were observed at the least populated locations. In addition to characteristics associated with the larger socio-economic area, the patterns of transgression could be associated with the properties of the existing safety equipment and the design of each level crossing (i.e. location of the platforms, number of rail tracks). Indeed, the largest number of crossed unoccupied but “at risk” rail tracks (where a train could have passed), was observed at the crossing with the least transgressions. Contrary to previous findings, younger adults were the most frequent transgressors. School children and elderly were most likely to transgress in groups. Potential directions for future research and more effective measures are discussed.

Investigations of an electrochemical platform based on the layered MoS2-graphene and horseradish peroxidase nanocomposite for direct electrochemistry and electrocatalysis

The self-assembly of layered molybdenum disulfide–graphene (MoS2–Gr) and horseradish peroxidase (HRP) by electrostatic attraction into a novel hybrid nanomaterial (HRP–MoS2–Gr) is reported. The properties of the MoS2–Gr were characterized by X-ray diffraction (XRD), high-resolution transmission electron microscopy (TEM), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). UV–vis and Fourier transform infrared spectroscopy (FT-IR) indicate that the native structure of the HRP is maintained after the assembly, implying good biocompatibility of MoS2–Gr nanocomposite. Furthermore, the HRP–MoS2–Gr composite is utilized as a biosensor, which displays electrocatalytic activity to hydrogen peroxide (H2O2) with high sensitivity (679.7 μA mM−1 cm−2), wide linear range (0.2 μM–1.103 mM), low detection limit (0.049 μM), and fast amperometric response. In addition, the biosensor also exhibits strong anti-interference ability, satisfactory stability and reproducibility. These desirable electrochemical properties are attributed to the good biocompatibility and electron transport efficiency of the MoS2–Gr composite, as well as the high loading of HRP. Therefore, this biosensor is potentially suitable for H2O2 analysis in environmental, pharmaceutical, food or industrial applications.

Melt electrospinning of poly(epsilon-caprolactone) scaffolds: Phenomenological observations associated with collection and direct writing

Melt electrospinning and its additive manufacturing analogue, melt electrospinning writing (MEW), are two processes which can produce porous materials for applications where solvent toxicity and accumulation in solution electrospinning are problematic. This study explores the melt electrospinning of poly(ε-caprolactone) (PCL) scaffolds, specifically for applications in tissue engineering. The research described here aims to inform researchers interested in melt electrospinning about technical aspects of the process. This includes rapid fiber characterization using glass microscope slides, allowing influential processing parameters on fiber morphology to be assessed, as well as observed fiber collection phenomena on different collector substrates. The distribution and alignment of melt electrospun PCL fibers can be controlled to a certain degree using patterned collectors to create large numbers of scaffolds with shaped macroporous architectures. However, the buildup of residual charge in the collected fibers limits the achievable thickness of the porous template through such scaffolds. One challenge identified for MEW is the ability to control charge buildup so that fibers can be placed accurately in close proximity, and in many centimeter heights. The scale and size of scaffolds produced using MEW, however, indicate that this emerging process will fill a technological niche in biofabrication.

Direct photocatalytic conversion of aldehydes to esters using supported gold nanoparticles under visible light irradiation at room temperature

Visible light can drive esteri fi cation from aldehydes and alcohols using supported gold nanoparticles (Au/Al 2 O 3 ) as photo- catalysts at ambient temperatures. The gold nanoparticles (AuNPs) absorb visible light due to the localized surface plasmon resonance (LSPR) e ff ect, and the conduction electrons of the AuNPs gain the energy of the incident light. The energetic electrons, which concentrate at the NP surface, facilitate the activation of a range of aldehyde and alcohol substrates. The photocatalytic e ffi ciencies strongly depend on the Au loading, particle sizes of the AuNPs, irradiance, and wavelength of the light irradiation. Finally, a plausible reaction mechanism was proposed, and the Au/Al 2 O 3 catalysts can be reused several times without signi fi cantly losing activity. The knowledge acquired in this study may inspire further studies in new e ffi cient recyclable photocatalysts and a wide range of organic synthesis driven by sunlight.