Initial steps in optimal planning of a distribution system

This paper reports the initial steps of research on planning of rural networks for MV and LV. In this paper, two different cases are studied. In the first case, 100 loads are distributed uniformly on a 100 km transmission line in a distribution network and in the second case, the load structure become closer to the rural situation. In case 2, 21 loads are located in a distribution system so that their distance is increasing, distance between load 1 and 2 is 3 km, between 2 and 3 is 6 km, etc). These two models to some extent represent the distribution system in urban and rural areas, respectively. The objective function for the design of the optimal system consists of three main parts: cost of transformers, and MV and LV conductors. The bus voltage is expressed as a constraint and should be maintained within a standard level, rising or falling by no more than 5%.

Effectiveness of reactive power capability of photo voltaic inverters to maintain voltage profile in a residential distribution feeder

Large penetration of rooftop PVs has resulted in unacceptable voltage profile in many residential distribution feeders. Limiting real power injection from PVs to alleviate over voltage problem is not feasible due to loss of green power and hence corresponding revenue loss. Reactive capability of the PV inverter can be a solution to address over voltage and voltage dip problems to some extent. This paper proposes an algorithm to utilize reactive capability of PV inverters and investigate their effectiveness for voltage improvement based on R/X ratio of the feeder. The length and loading level of the feeder for a particular R/X ratio to have acceptable voltage profile is also investigated. This can be useful for suburban design and residential distribution planning. Furthermore, coordination among different PVs using residential smart meters via a substation based controller is also proposed.

Effectiveness of reactive power capability of photo voltaic inverters to maintain acceptable voltage profile in a residential distribution system

Integration of rooftop PVs and increasing peak demand in the residential distribution networks has resulted in unacceptable voltage profile. Curtailing PV generation to alleviate overvoltage problem and making regular network investment to cater peak demand is not always feasible. Reactive capability of the PV inverter can be a solution to address voltage dip and over voltage problems to some extent. This paper proposes an algorithm to utilize reactive capability of PV inverters and investigate their effectiveness on feeder length and R/X ratio of the line. Feeder loading level for a particular R/X ratio to have acceptable voltage profile is also investigated. Furthermore, the need of appropriate feeder distances and R/X ratio for acceptable voltage profile, which can be useful for suburban design and distribution planning, is explored.

Multi-victim sexual assault : a case study in rural Australia

Objective: There is a paucity of information regarding cases of multi-victim sexual assault of children. The reported incidence suggests that these cases are rare. The aim of this paper is to provide practitioners with information about effective intervention strategies arising out of the direct experience of managing a case of multi-victim sexual assault in an Australian rural community. --------- Method: A descriptive, case-report methodology summarizing the investigation and intervention in a case of multi-victim sexual assault is reported. A community based intervention arising out of the disclosures of 21 male children is described. The intervention occurred at an individual, group, and community level using a coordinated multi-disciplinary team and natural helping networks. ---------- Results: The coordination of police and welfare services increased the communication flow to victims, their families, and the community. The case also demonstrated the utility in regularly briefing political and bureaucratic authorities as well as local officials about emergent issues. Coordinating political and bureaucratic responses was essential in obtaining ongoing support and sufficient researching to enable the effective delivery of services. ---------- Conclusions: Interventions were focused at an individual, group, and community level using a coordinated multi-disciplinary team and natural helping networks. This provided a choice of services which were sensitive to the case setting. Recommendations are offered for practitioners who are confronted with similar events. While this paper describes an approach for intervening in a case of multi-victim sexual assault, further empirical research is needed to enable service deliverers to efficaciously target interventions which offer choice to victims and their families.

Droop control of converter interfaced micro sources in rural distributed generation

This paper proposes new droop control methods for load sharing in a rural area with distributed generation. Highly resistive lines, typical of rural low voltage networks, always create a big challenge for conventional droop control. To overcome the conflict between higher feedback gain for better power sharing and system stability in angle droop, two control methods have been proposed. The first method considers no communication among the distributed generators (DGs) and regulates the converter output voltage and angle ensuring proper sharing of load in a system having strong coupling between real and reactive power due to high line resistance. The second method, based on a smattering of communication, modifies the reference output volt-age angle of the DGs depending on the active and reactive power flow in the lines connected to point of common coupling (PCC). It is shown that with the second proposed control method, an economical and minimum communication system can achieve significant improvement in load sharing. The difference in error margin between proposed control schemes and a more costly high bandwidth communication system is small and the later may not be justified considering the increase in cost. The proposed control shows stable operation of the system for a range of operating conditions while ensuring satisfactory load sharing.

Modelling the broadband wireless channel in rural Australia

The internet infrastructure which supports high data rates has a major impact on the Australian economy and the world. However, in rural Australia, the provision of broadband services to an internet dispersed population over a large geographical area with low population densities remains both an economic and technical challenge [1]. Furthermore, the implementation of currently available technologies such as fibre-to-the-premise (FTTP), 3G, 4G and WiMAX seems to be impractical, considering the low population density that is distributed in a large area. Therefore, new paradigms and innovative telecommunication technologies need to be explored to overcome the challenges of providing faster and more reliable broadband internet services to internet dispersed rural areas. The research project implements an innovative Multi-User- Single-Antenna for MIMO (MUSA-MIMO) technology using the spectrum currently allocated to analogue TV. MUSAMIMO technology can be considered as a special case of MIMO technology, which is beneficial when provisioning reliable and high-speed communication channels. Particularly, the abstract describes the development of a novel MUSA-MIMO channel model that takes into account temporal variations in the rural wireless environment. This can be considered as a novel approach tailor-made to rural Australia for provisioning efficient wireless broadband communications.

Channel tracking algorithms for highly efficient wireless broadband communications in rural areas

High-speed broadband internet access is widely recognised as a catalyst to social and economic development, having a significant impact on global economy. Rural Australia’s inherent dispersed population over a large geographical area make the delivery of efficient, well-maintained and cost-effective internet a challenging task. The novel and highly-efficient Multi-User-Single-Antenna for MIMO (MUSA-MIMO) broadband wireless communication technology can effectively be used to deliver wireless broadband access to rural areas. This research aims to develop for the first time, an efficient and accurate algorithm for the tracking and prediction of Channel State Information (CSI) at the transmitter, by characterising time variation effects of the wireless communication channel on the performance of a highly-efficient MUSA-MIMO technology particularly suited for rural communities, improving their quality of life and economic prosperity.

Rethinking regional green space networks in China

Ecological networks are often represented as utopian webs of green meandering through cities, across states, through regions and even across a country (Erickson, 2006, p.28; Fabos, 2004, p.326; Walmsley, 2006). While this may be an inspiring goal for some in developed countries, the reality may be somewhat different in developing countries. China, in its shift to urbanisation and suburbanisation, is also being persuaded to adjust its planning schemes according to these aspirational representations of green spaces (Yu et al, 2006, p.237; Zhang and Wang, 2006, p.455). The failure of other countries to achieve regional goals of natural and cultural heritage protection on the ground in this way (Peterson et al, 2007; Ryan et al, 2006; von Haaren and Reich, 2006) suggests that there may be flaws in the underpinning concepts that are widely circulated in North American and Western European literature (Jongman et al, 2004; Walmsley, 2006). In China, regional open space networks, regional green infrastructure or regional ecological corridors as we know them in the West, are also likely to be problematic, at least in the foreseeable future. Reasons supporting this view can be drawn from lessons learned from project experience in landscape planning and related fields of study in China and overseas. Implementation of valuable regional green space networks is problematic because: • the concept of region as a spatial unit for planning green space networks is ambiguous and undefinable for practical purposes; • regional green space networks traditionally require top down inter-governmental cooperation and coordination which are generally hampered by inequalities of influence between and within government agencies; • no coordinating body with funding powers exists for regional green space development and infrastructure authorities are still in transition from engineering authorities; • like other infrastructure projects, green space is likely to become a competitive rather than a complementary resource for city governments; • stable long-term management, maintenance and uses of green space networks must fit into a ‘family’ social structure rather than a ‘public good’ social structure, particularly as rural and urban property rights are being re-negotiated with city governments; and • green space provision is a performance indicator of urban improvement in cities within the city hierarchy and remains quantitatively-based (land area, tree number and per capita share) rather than qualitatively-based with local people as the focus.

A simultaneous equations model of crash frequency by collision type for rural intersections

Safety at roadway intersections is of significant interest to transportation professionals due to the large number of intersections in transportation networks, the complexity of traffic movements at these locations that leads to large numbers of conflicts, and the wide variety of geometric and operational features that define them. A variety of collision types including head-on, sideswipe, rear-end, and angle crashes occur at intersections. While intersection crash totals may not reveal a site deficiency, over exposure of a specific crash type may reveal otherwise undetected deficiencies. Thus, there is a need to be able to model the expected frequency of crashes by collision type at intersections to enable the detection of problems and the implementation of effective design strategies and countermeasures. Statistically, it is important to consider modeling collision type frequencies simultaneously to account for the possibility of common unobserved factors affecting crash frequencies across crash types. In this paper, a simultaneous equations model of crash frequencies by collision type is developed and presented using crash data for rural intersections in Georgia. The model estimation results support the notion of the presence of significant common unobserved factors across crash types, although the impact of these factors on parameter estimates is found to be rather modest.

Load frequency control for rural distributed generation

In rural low-voltage networks, distribution lines are usually highly resistive. When many distributed generators are connected to such lines, power sharing among them is difficult when using conventional droop control, as the real and reactive power have strong coupling with each other. A high droop gain can alleviate this problem but may lead the system to instability. To overcome4 this, two droop control methods are proposed for accurate load sharing with frequency droop controller. The first method considers no communication among the distributed generators and regulates the output voltage and frequency, ensuring acceptable load sharing. The droop equations are modified with a transformation matrix based on the line R/X ration for this purpose. The second proposed method, with minimal low bandwidth communication, modifies the reference frequency of the distributed generators based on the active and reactive power flow in the lines connected to the points of common coupling. The performance of these two proposed controllers is compared with that of a controller, which includes an expensive high bandwidth communication system through time-domain simulation of a test system. The magnitude of errors in power sharing between these three droop control schemes are evaluated and tabulated.

Networks cities and ecological habitats

As the world’s rural populations continue to migrate from farmland to sprawling cities, transport networks form an impenetrable maze within which monocultures of urban form erupt from the spaces in‐between. These urban monocultures are as problematic to human activity in cities as cropping monocultures are to ecosystems in regional landscapes. In China, the speed of urbanisation is exacerbating the production of mono‐functional private and public spaces. Edges are tightly controlled. Barriers and management practices at these boundaries are discouraging the formation of new synergistic relationships, critical in the long‐term stability of ecosystems that host urban habitats. Some urban planners, engineers, urban designers, architects and landscape architects have recognised these shortcomings in contemporary Chinese cities. The ideology of sustainability, while critically debated, is bringing together thinking people in these and other professions under the umbrella of an ecological ethic. This essay aims to apply landscape ecology theory, a conceptual framework used by many professionals involved in land development processes, to a concept being developed by BAU International called Networks Cities: a city with its various land uses arranged in nets of continuity, adjacency, and superposition. It will consider six lesser‐known concepts in relation to creating enhanced human activity along (un)structured edges between proposed nets and suggest new frontiers that might be challenged in an eco‐city. Ecological theory suggests that sustaining biodiversity in regions and landscapes depends on habitat distribution patterns. Flora and fauna biologists have long studied edge habitats and have been confounded by the paradox that maximising the breadth of edges is detrimental to specialist species but favourable to generalist species. Generalist species of plants and animals tolerate frequent change in the landscape, frequenting two or more habitats for their survival. Specialist species are less tolerant of change, having specific habitat requirements during their life cycle. Protecting species richness then may be at odds with increasing mixed habitats or mixed‐use zones that are dynamic places where diverse activities occur. Forman (1995) in his book Land Mosaics however argues that these two objectives of land use management are entirely compatible. He postulates that an edge may be comprised of many small patches, corridors or convoluting boundaries of large patches. Many ecocentrists now consider humans to be just another species inhabiting the ecological environments of our cities. Hence habitat distribution theory may be useful in planning and designing better human habitats in a rapidly urbanising context like China. In less‐constructed environments, boundaries and edges provide important opportunities for the movement of multi‐habitat species into, along and from adjacent land use areas. For instance, invasive plants may escape into a national park from domestic gardens while wildlife may forage on garden plants in adjoining residential areas. It is at these interfaces that human interactions too flow backward and forward between land types. Spray applications of substances by farmers on cropland may disturb neighbouring homeowners while suburban residents may help themselves to farm produce on neighbouring orchards. Edge environments are some of the most dynamic and contested spaces in the landscape. Since most of us require access to at least two or three habitats diurnally, weekly, monthly or seasonally, their proximity to each other becomes critical in our attempts to improve the sustainability of our cities.

Planning of distribution networks for medium voltage and low voltage

Determination of the placement and rating of transformers and feeders are the main objective of the basic distribution network planning. The bus voltage and the feeder current are two constraints which should be maintained within their standard range. The distribution network planning is hardened when the planning area is located far from the sources of power generation and the infrastructure. This is mainly as a consequence of the voltage drop, line loss and system reliability. Long distance to supply loads causes a significant amount of voltage drop across the distribution lines. Capacitors and Voltage Regulators (VRs) can be installed to decrease the voltage drop. This long distance also increases the probability of occurrence of a failure. This high probability leads the network reliability to be low. Cross-Connections (CC) and Distributed Generators (DGs) are devices which can be employed for improving system reliability. Another main factor which should be considered in planning of distribution networks (in both rural and urban areas) is load growth. For supporting this factor, transformers and feeders are conventionally upgraded which applies a large cost. Installation of DGs and capacitors in a distribution network can alleviate this issue while the other benefits are gained. In this research, a comprehensive planning is presented for the distribution networks. Since the distribution network is composed of low and medium voltage networks, both are included in this procedure. However, the main focus of this research is on the medium voltage network planning. The main objective is to minimize the investment cost, the line loss, and the reliability indices for a study timeframe and to support load growth. The investment cost is related to the distribution network elements such as the transformers, feeders, capacitors, VRs, CCs, and DGs. The voltage drop and the feeder current as the constraints are maintained within their standard range. In addition to minimizing the reliability and line loss costs, the planned network should support a continual growth of loads, which is an essential concern in planning distribution networks. In this thesis, a novel segmentation-based strategy is proposed for including this factor. Using this strategy, the computation time is significantly reduced compared with the exhaustive search method as the accuracy is still acceptable. In addition to being applicable for considering the load growth, this strategy is appropriate for inclusion of practical load characteristic (dynamic), as demonstrated in this thesis. The allocation and sizing problem has a discrete nature with several local minima. This highlights the importance of selecting a proper optimization method. Modified discrete particle swarm optimization as a heuristic method is introduced in this research to solve this complex planning problem. Discrete nonlinear programming and genetic algorithm as an analytical and a heuristic method respectively are also applied to this problem to evaluate the proposed optimization method.

A study of postdiagnosis breast cancer concerns for women living in rural and remote Queensland. Part II : support issues

This paper presents the recent findings from a study on the postdiagnosis support needs of women with breast cancer living in rural and remote Queensland. The findings presented in this discussion focus on support needs from the perspective of the women experiencing breast cancer as well as health service providers. The tyranny of distance imposes unique hardships, such as separation from family and friends, during a time of great vulnerability for treatment, the need to travel long distances for support and follow-up services, and extra financial burdens, which can combine to cause strains on the marital relationship and family cohesion. Positive indications are, however, that the rural communities operate on strong, informal networks of support. This network of family, friends and community can, and does, play an active role in the provision of emotional and practical support.

Constructions of children's needs in informal kinship care in rural China

Kinship care is the oldest form of alternative child care in the world. Recent years have witnessed a significant increase in the number of children being placed in kinship care across Western countries. However, in contrast to rapid knowledge advances about formal kinship care, far less is known about the needs of children in informal kinship care, especially in Asian contexts. This thesis and the study upon which it is formed sought to redress this knowledge gap. Qualitative approach was adopted to explore social constructions of children in informal kinship care in rural China. Parents in China seeking work in cities have left behind around 58 million rural children, mostly with relatives and without the involvement of the state. The present study examined caregivers’ and school personnel’s understandings of these school-age children’s needs through semi-structured interviews with 23 kin caregivers and five school personnel in Shijiapu Town, Jilin Province, China. The central question that guided the whole study is: What are the needs of children in informal kinship care in rural Jilin Province, China? Interpretative Phenomenological Analysis was used to categorise and interpret the qualitative data. Based on participants’ constructions, this study developed a need model with eight themes. They are: (1) emotional needs and mental health, (2) relationships, (3) empowerment and agency, (4) safety, (5) education, (6) basic care, (7) physical health, and (8) personal development. These needs are grounded in the Chinese context, and therefore a good understanding of Chinese culture is essential to address them. The first four needs particularly capture children’s separations from their parents, and the rest are more general, and can be applied to most Chinese children. To meet the most important need for children left behind, namely education, these caregivers determined that others needs sometimes have to be compromised. Children left behind are a vulnerable group in contemporary rural China, and their diverse needs are attended to by several groups. This study found that as children’s closest kin while their parents are away, caregivers play a vital role in salving the children’s emotional loss. Caregivers’ love and familial obligations strongly motivate them to care for these children, and sensitivity to social stigma makes them strive to show their love and care to compensate for perceived differences between these children and their peers. Caregivers’ efforts to make children happy, however, were sometimes criticised by some school personnel, who see this as spoiling. The conflicting viewpoint between caregivers and school personnel indicate their different roles and perceptions in children’s lives, and the latter influence these children in a more authoritative way. Informal kinship care has several advantages of addressing children’s needs, especially their needs for emotional bonds with family. Community-based kin networks provide children with both emotional and material support. However, these advantages sometimes are restricted by caregivers’ child rearing capacity. Having developed a model of the needs of children left behind in China, this study suggests that caregivers, school personnel and government social services work in harmony to be child-centred and meet these children’s diverse needs. The unmet needs of children left behind mainly result from unbalanced development between urban and rural China, therefore, it is imperative to enhance state policies and programs that improve wellbeing for this growing part of China’s people.

A rural health education, training and research network

The purpose of the Rural Health Education, Training and Research Network is to support the education and training of rural health practitioners and research in rural health through the optimum use of appropriate information and communication technologies to link and inform all individuals and organisation involved in the teaching, planning and delivery of health care in rural and remote Queensland. The health care of people in rural areas has the potential to be enhanced, through providing the rural and remote health professionals in Queensland with the same access to educational and training opportunities as their metropolitan colleagues. This consultative, coordinated approach should be cost-effective through both increasing awareness and utilisation of existing and developing networks, and through more efficient and rational use of both the basic and sophisticated technologies which support them. Technological hardware, expertise and infrastructure are already in place in Queensland to support a Rural Health Education, Training and Research Network, but are not being used to their potential, more often due to a lack of awareness of their existence and utility than to their perceived costs. Development of the network has commenced through seeding funds provided by Queensland Health. Future expansion will ensure access by health professionals to existing networks within Queensland. This paper explores the issues and implications of a network for rural health professionals in Queensland and potentially throughout Australia, with a specific focus on the implications for rural and isolated health professional.