A coupled SPH-DEM model for fluid and solid mechanics of apple parenchyma cells during drying

A coupled SPH-DEM based two-dimensional (2-D) micro-scale single cell model is developed to predict basic cell-level shrinkage effects of apple parenchyma cells during air drying. In this newly developed drying model, Smoothed Particle Hydrodynamics (SPH) is used to model the low Reynolds Number fluid motions of the cell protoplasm, and a Discrete Element Method (DEM) is employed to simulate the polymer-like cell wall. Simulations results reasonably agree with published experimental drying results on cellular shrinkage properties such as cellular area, diameter and perimeter. These preliminary results indicate that the model is effective for the modelling and simulation of apple parenchyma cells during air drying.

Morphology changes and mechanistic aspects of the electrochemically-induced reversible solid-solid transformation of microcrystalline TCNQ into Co TCNQ 2-based materials (TCNQ= 7, 7, 8, 8-Tetracyanoquinodimethane)

The chemically reversible solid−solid phase transformation of a TCNQ-modified glassy carbon, indium tin oxide, or metal electrode into Co\[TCNQ]2(H2O)2 material in the presence of Co2+(aq) containing electrolytes has been induced and monitored electrochemically. Voltammetric data reveal that the TCNQ/Co\[TCNQ]2(H2O)2 interconversion process is independent of electrode material and identity of cobalt electrolyte anion. However, a marked dependence on electrolyte concentration, scan rate, and method of electrode modification (drop casting or mechanical attachment) is found. Cyclic voltammetric and double potential step chronoamperometric measurements confirm that formation of Co\[TCNQ]2(H2O)2 occurs through a rate-determining nucleation and growth process that initially involves incorporation of Co2+(aq) ions into the reduced TCNQ crystal lattice at the TCNQ|electrode|electrolyte interface. Similarly, the reverse (oxidation) process, which involves transformation of solid Co\[TCNQ]2(H2O)2 back to parent TCNQ crystals, also is controlled by nucleation−growth kinetics. The overall chemically reversible process that represents this transformation is described by the reaction:  2TCNQ0(s) + 2e- + Co2+(aq) + 2H2O \[Co(TCNQ)2(H2O)2](s). Ex situ SEM images illustrated that this reversible TCNQ/Co\[TCNQ]2(H2O)2 conversion process is accompanied by drastic size and morphology changes in the parent solid TCNQ. In addition, different sizes of needle-shaped nanorod/nanowire crystals of Co\[TCNQ]2(H2O)2 are formed depending on the method of surface immobilization.

AFM study of morphological changes associated with electrochemical solid--solid transformation of three-dimensional crystals of TCNQ to metal derivatives (metal= Cu, Co, Ni; TCNQ= tetracyanoquinodimethane)

In situ atomic force microscopy (AFM) allows images from the upper face and sides of TCNQ crystals to be monitored during the course of the electrochemical solid–solid state conversion of 50 × 50 μm2 three-dimensional drop cast crystals of TCNQ to CuTCNQ or M[TCNQ]2(H2O)2 (M = Co, Ni). Ex situ images obtained by scanning electron microscopy (SEM) also allow the bottom face of the TCNQ crystals, in contact with the indium tin oxide or gold electrode surface and aqueous metal electrolyte solution, to be examined. Results show that by carefully controlling the reaction conditions, nearly mono-dispersed, rod-like phase I CuTCNQ or M[TCNQ]2(H2O)2 can be achieved on all faces. However, CuTCNQ has two different phases, and the transformation of rod-like phase 1 to rhombic-like phase 2 achieved under conditions of cyclic voltammetry was monitored in situ by AFM. The similarity of in situ AFM results with ex situ SEM studies accomplished previously implies that the morphology of the samples remains unchanged when the solvent environment is removed. In the process of crystal transformation, the triple phase solid∣electrode∣electrolyte junction is confirmed to be the initial nucleation site. Raman spectra and AFM images suggest that 100% interconversion is not always achieved, even after extended electrolysis of large 50 × 50 μm2 TCNQ crystals.

Scanning electrochemical microscopy study of the solid--solid interconversion of TCNQ to phase I and phase II CuTCNQ

The reduction of 7,7,8,8-tetracyanoquinodimethane (TCNQ) crystals attached to a glassy carbon electrode in the presence of Cu2+(aq) to form CuTCNQ(s) has been investigated using scanning electrochemical microscopy in the substrate generation tip collection mode and shown to involve a generation of soluble TCNQ−(aq). The subsequent oxidation of CuTCNQ does not involve simple expulsion of Cu+ into solution but a soluble complex attributed to Cu2+TCNQ−(aq). Mechanistic insights relative to the electrochemical conversion of CuTCNQ phase I into phase II by repetitive cycling of potential and electrochemical formation of KTCNQ have also been established

Raman spectroscopy of the molybdate minerals chillagite (tungsteinian wulfenite-I4), stolzite, scheelite, wolframite and wulfenite

Raman spectra of chillagite, wulfenite, stolzite, scheelite and wolframite were obtained at 298 and 77 K using a Raman microprobe in combination with a thermal stage. Chillagite is a solid solution of wulfenite and stolzite. The spectra of these molybdate minerals are orientation dependent. The band at 695 cm-1 is interpreted as an antisymmetric bridging mode associated with the tungstate chain. The bands at 790 and 881 cm-1 are associated with the antisymmetric and symmetric Ag modes of terminal WO2 whereas the origin of the 806 cm-1 band remains unclear. The 4(Eg) band was absent for scheelite. The bands at 353 and 401 cm-1 are assigned as either deformation modes or as r(Bg) and (Ag) modes of terminal WO2. The band at 462 cm-1 has an equivalent band in the infrared at 455 cm-1 assigned as as(Au) of the (W2O4)n chain. The band at 508 cm-1 is assigned as sym(Bg) of the (W2O4)n chain.

Improving governance : practical methods and an analytic framework for the enhancement of democracy

Seven endemic governance problems are shown to be currently present in governments around the globe and at any level of government as well (for example municipal, federal). These problems have their roots traced back through more than two thousand years of political, specifically ‘democratic’, history. The evidence shows that accountability, transparency, corruption, representation, campaigning methods, constitutionalism and long-term goals were problematic for the ancient Athenians as well as modern international democratisation efforts encompassing every major global region. Why then, given the extended time period humans have had to deal with these problems, are they still present? At least part of the answer to this question is that philosophers, academics and NGOs as well as MNOs have only approached these endemic problems in a piecemeal manner with a skewed perspective on democracy. Their works have also been subject to the ebbs and flows of human history which essentially started and stopped periods of thinking. In order to approach the investigation of endemic problems in relation to democracy (as the overall quest of this thesis was to generate prescriptive results for the improvement of democratic government), it was necessary to delineate what exactly is being written about when using the term ‘democracy’. It is common knowledge that democracy has no one specific definition or practice, even though scholars and philosophers have been attempting to create a definition for generations. What is currently evident, is that scholars are not approaching democracy in an overly simplified manner (that is, it is government for the people, by the people) but, rather, are seeking the commonalities that democracies share, in other words, those items which are common to all things democratic. Following that specific line of investigation, the major practiced and theoretical versions of democracy were thematically analysed. After that, their themes were collapsed into larger categories, at which point the larger categories were comparatively analysed with the practiced and theoretical versions of democracy. Four democratic ‘particles’ (selecting officials, law, equality and communication) were seen to be present in all practiced and theoretical democratic styles. The democratic particles fused with a unique investigative perspective and in-depth political study created a solid conceptualisation of democracy. As such, it is argued that democracy is an ever-present element of any state government, ‘democratic’ or not, and the particles are the bodies which comprise the democratic element. Frequency- and proximity-based analyses showed that democratic particles are related to endemic problems in international democratisation discourse. The linkages between democratic particles and endemic problems were also evident during the thematic analysis as well historical review. This ultimately led to the viewpoint that if endemic problems are mitigated the act may improve democratic particles which might strengthen the element of democracy in the governing apparatus of any state. Such may actively minimise or wholly displace inefficient forms of government, leading to a government specifically tailored to the population it orders. Once the theoretical and empirical goals were attained, this thesis provided some prescriptive measures which government, civil society, academics, professionals and/or active citizens can use to mitigate endemic problems (in any country and at any level of government) so as to improve the human condition via better democratic government.

Psychosocial experience of cancer : surpassing mere survival and recognising the potential for posttraumatic growth as well as distress.

The publication of the fourth edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-IV; American Psychiatric Association, 1994) introduced the notion that a life-threatening illness can be a stressor and catalyst for Posttraumatic Stress Disorder (PTSD). Since then a solid body of research has been established investigating the post-diagnosis experience of cancer. These studies have identified a number of short and long-term life changes resulting from a diagnosis of cancer and associated treatments. In this chapter, we discuss the psychosocial response to the cancer experience and the potential for cancer-related distress. Cancer can represent a life-threatening diagnosis that may be associated with aggressive treatments and result in physical and psychological changes. The potential for future trauma through the lasting effects of the disease and treatment, and the possibility of recurrence, can be a source of continued psychological distress. In addition to the documented adverse repercussions of cancer, we also outline the recent shift that has occurred in the psycho-oncology literature regarding positive life change or posttraumatic growth that is commonly reported after a diagnosis of cancer. Adopting a salutogenic framework acknowledges that the cancer experience is a dynamic psychosocial process with both negative and positive repercussions. Next, we describe the situational and individual factors that are associated with posttraumatic growth and the types of positive life change that are prevalent in this context. Finally, we discuss the implications of this research in a therapeutic context and the directions of future posttraumatic growth research with cancer survivors. This chapter will present both quantitative and qualitative research that indicates the potential for personal growth from adversity rather than just mere survival and return to pre-diagnosis functioning. It is important to emphasise however, that the presence of growth and prevalence of resilience does not negate the extremely distressing nature of a cancer diagnosis for the patient and their families and the suffering that can accompany treatment regimes. Indeed, it will be explained that for growth to occur, the experience must be one that quite literally shatters previously held schemas in order to act as a catalyst for change.

The effect of Yb addition in bi2sr2ca 1-xybxcu2oy partial melted thick films

To study the phase relations in the Bi-2212 and Yb2O3 system, Bi2Sr2Ca1-xYbxCu 2Oy thick films are prepared by partial melt processing via an intermediate reaction between Bi-2212 and Yb2O3. When Bi-2212 and Yb2O3 are partially melted and then slowly cooled, solid solutions of Bi2Sr2Ca 1-xYbxCu2Oy, form by reactions between liquid and solid phases which contain Yb. Following these reactions, Ca is partially replaced in Bi-2212 matrix and participates in the formation of secondary phases, such as Bi-free, (Ca, Sr)Ox and CaO. Variation of the Bi-2212-Yb2O3 ratios and processing parameters changes the balance between the phases and leads to different Yb:Ca ratios in the Bi-2212 matrix of processed thick films. When the partial melting process is optimized for each sample to minimize the growth of secondary phases, x = 0.42-0.46 for the samples prepared at pO2 = 0.01 atm, x = 0.24-0.29 for the samples prepared at pO2 = 0.21 atm, x = 0.18-0.23 for the samples prepared at pO2 = 0.99 atm are obtained regardless to the starting compositions. It is found that superconducting properties of Bi 2Sr2Ca1-xYbxCu2O y thick films strongly depend on the processing conditions, because the conditions result in different Yb content in the Bi-2212 matrix and the volume fraction of the secondary phases. The highest Tc(0) of 77, 90 and 91 K were obtained for the samples processed at 0.01, 0.21 and 0.99 atm of O2, respectively.

The deep trauma of secondary victimisation : parents of sex offenders

The publication of the fourth edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-IV; American Psychiatric Association, 1994) introduced the notion that a life-threatening illness can be a stressor and catalyst for Posttraumatic Stress Disorder (PTSD). Since then a solid body of research has been established investigating the post-diagnosis experience of cancer. These studies have identified a number of short and long-term life changes resulting from a diagnosis of cancer and associated treatments. In this chapter, we discuss the psychosocial response to the cancer experience and the potential for cancer-related distress. Cancer can represent a life-threatening diagnosis that may be associated with aggressive treatments and result in physical and psychological changes. The potential for future trauma through the lasting effects of the disease and treatment, and the possibility of recurrence, can be a source of continued psychological distress. In addition to the documented adverse repercussions of cancer, we also outline the recent shift that has occurred in the psycho-oncology literature regarding positive life change or posttraumatic growth that is commonly reported after a diagnosis of cancer. Adopting a salutogenic framework acknowledges that the cancer experience is a dynamic psychosocial process with both negative and positive repercussions. Next, we describe the situational and individual factors that are associated with posttraumatic growth and the types of positive life change that are prevalent in this context. Finally, we discuss the implications of this research in a therapeutic context and the directions of future posttraumatic growth research with cancer survivors. This chapter will present both quantitative and qualitative research that indicates the potential for personal growth from adversity rather than just mere survival and return to pre-diagnosis functioning. It is important to emphasise however, that the presence of growth and prevalence of resilience does not negate the extremely distressing nature of a cancer diagnosis for the patient and their families and the suffering that can accompany treatment regimes. Indeed, it will be explained that for growth to occur, the experience must be one that quite literally shatters previously held schemas in order to act as a catalyst for change.

Electrospinning and crosslinking of low-molecular-weight poly(trimethylene carbonate-co-L-lactide) as an elastomeric scaffold for vascular engineering

The growth of suitable tissue to replace natural blood vessels requires a degradable scaffold material that is processable into porous structures with appropriate mechanical and cell growth properties. This study investigates the fabrication of degradable, crosslinkable prepolymers of l-lactide-co-trimethylene carbonate into porous scaffolds by electrospinning. After crosslinking by γ-radiation, dimensionally stable scaffolds were obtained with up to 56% trimethylene carbonate incorporation. The fibrous mats showed Young’s moduli closely matching human arteries (0.4–0.8 MPa). Repeated cyclic extension yielded negligible change in mechanical properties, demonstrating the potential for use under dynamic physiological conditions. The scaffolds remained elastic and resilient at 30% strain after 84 days of degradation in phosphate buffer, while the modulus and ultimate stress and strain progressively decreased. The electrospun mats are mechanically superior to solid films of the same materials. In vitro, human mesenchymal stem cells adhered to and readily proliferated on the three-dimensional fiber network, demonstrating that these polymers may find use in growing artificial blood vessels in vivo.

Comprehensive Addictive Behaviors and Disorders, Volume 1 : Principles of Addiction

"Principles of Addiction provides a solid understanding of the definitional and diagnostic differences between use, abuse, and disorder. It describes in great detail the characteristics of these syndromes and various etiological models. The book's three main sections examine the nature of addiction, including epidemiology, symptoms, and course; alcohol and drug use among adolescents and college students; and detailed descriptions of a wide variety of addictive behaviors and disorders, encompassing not only drugs and alcohol, but caffeine, food, gambling, exercise, sex, work, social networking, and many other areas. This volume is especially important in providing a basic introduction to the field as well as an in-depth review of our current understanding of the nature and process of addictive behaviors. Principles of Addiction is one of three volumes comprising the 2,500-page series, Comprehensive Addictive Behaviors and Disorders. This series provides the most complete collection of current knowledge on addictive behaviors and disorders to date. In short, it is the definitive reference work on addictions."--publisher website

Contemporary cultures of service delivery to families : implications for music therapy

Family-centred and early intervention and prevention programs are a strong focus of current policy objectives within Australia, and a significant area of practice within the music therapy community. Recent shifts in the culture of policy and practice increasingly reflect ecological understandings by focussing on integrated and place-based approaches to service delivery. Further, current funding opportunities are strongly concerned with the extent to which interventions are able to reach out to highly vulnerable families that typically do not engage with services easily. Music therapy holds unique promise within these cultural shifts and thus advocates must develop a solid understanding of the concepts and related language in order to confidently engage with both funding and service systems. This paper uses an integrative review to first define and summarise current knowledge in three key areas relevant to contemporary Australian policy and practice: hard-to-reach families, home visiting as assertive outreach, and integrated or place-based service delivery. Evidence for the effectiveness of music therapy in relation to these key themes is then presented. Finally, the paper discusses the implications for the future of music therapy within the current Australian early intervention and prevention policy context and makes recommendations for moving forward on both practice and research fronts. While there is growing evidence and theory to suggest that music therapy may be uniquely efficacious in this area, greater Australian Journal of Music Therapy Vol 25, 2014 149 advocacy, documentation, research and adjustment of practices and language will further cement the position of the industry.

Application of meshfree methods to numerically simulate microscale deformations of different plant food materials during drying

Plant food materials have a very high demand in the consumer market and therefore, improved food products and efficient processing techniques are concurrently being researched in food engineering. In this context, numerical modelling and simulation techniques have a very high potential to reveal fundamentals of the underlying mechanisms involved. However, numerical modelling of plant food materials during drying becomes quite challenging, mainly due to the complexity of the multiphase microstructure of the material, which undergoes excessive deformations during drying. In this regard, conventional grid-based modelling techniques have limited applicability due to their inflexible grid-based fundamental limitations. As a result, meshfree methods have recently been developed which offer a more adaptable approach to problem domains of this nature, due to their fundamental grid-free advantages. In this work, a recently developed meshfree based two-dimensional plant tissue model is used for a comparative study of microscale morphological changes of several food materials during drying. The model involves Smoothed Particle Hydrodynamics (SPH) and Discrete Element Method (DEM) to represent fluid and solid phases of the cellular structure. Simulation are conducted on apple, potato, carrot and grape tissues and the results are qualitatively and quantitatively compared and related with experimental findings obtained from the literature. The study revealed that cellular deformations are highly sensitive to cell dimensions, cell wall physical and mechanical properties, middle lamella properties and turgor pressure. In particular, the meshfree model is well capable of simulating critically dried tissues at lower moisture content and turgor pressure, which lead to cell wall wrinkling. The findings further highlighted the potential applicability of the meshfree approach to model large deformations of the plant tissue microstructure during drying, providing a distinct advantage over the state of the art grid-based approaches.

Electronic structure studies and photocatalytic properties of cubic Bi1.5ZnNb1.5O7

The photocatalytic ability of cubic Bi1.5ZnNb1.5O7 (BZN) pyrochlore for the decolorization of an acid orange 7 (AO7) azo dye in aqueous solution under ultraviolet (UV) irradiation has been investigated for the first time. BZN catalyst powders prepared using low temperature sol-gel and higher temperature solid-state methods have been evaluated and their reaction rates have been compared.The experimental band gap energy has been estimated from the optical absorption edge and has been used as reference for theoretical calculations. The electronic band structure of BZN has been investigated using first-principles density functional theory (DFT) calculations for random, completely and partially ordered solid solutions of Zn cations in both the A and B sites of the pyrochlore structure.The nature of the orbitals in the valence band (VB) and the conduction band (CB) has been identified and the theoretical band gap energy has been discussed in terms of the DFT model approximations.

Plasma-enhanced synthesis of bioactive polymeric coatings from monoterpene alcohols: A combined experimental and theoretical study

This paper describes the synthesis and characterization of a novel organic polymer coating for the prevention of the growth of Pseudomonas aeruginosa on the solid surface of three-dimensional objects. Substrata were encapsulated with polyterpenol thin films prepared from terpinen-4-ol using radio frequency plasma enhanced chemical vapor deposition. Terpinen-4-ol is a constituent of tea tree oil with known antibacterial properties. The influence of deposition power on the chemical structure, surface composition, and ultimately the antibacterial inhibitory activity of the resulting polyterpenol thin films was studied using X-ray photoelectron spectroscopy (XPS), water contact angle measurement, atomic force microscopy (AFM), and 3-D interactive visualization and statistical approximation of the topographic profiles. The experimental results were consistent with those predicted by molecular simulations. The extent of bacterial attachment and extracellular polymeric substances (EPS) production was analyzed using scanning electron microscopy (SEM) and confocal scanning laser microscopy (CSLM). Polyterpenol films deposited at lower power were particularly effective against P. aeruginosa due to the preservation of original terpinen-4-ol molecules in the film structure. The proposed antimicrobial and antifouling coating can be potentially integrated into medical and other clinically relevant devices to prevent bacterial growth and to minimize bacteria-associated adverse host responses.