Head and eye movements and lane keeping in drivers with hemianopia and quadrantanopia compared to controls

Purpose: To compare the eye and head movements and lane-keeping of drivers with hemianopia and quadrantanopia with that of age-matched controls when driving under real world conditions. Methods: Participants included 22 hemianopes and 8 quadrantanopes (M age 53 yrs) and 30 persons with normal visual fields (M age 52 yrs) who were ≥ 6 months from the brain injury date and either a current driver or aiming to resume driving. All participants drove an instrumented dual-brake vehicle along a 14-mile route in traffic that included non-interstate city driving and interstate driving. Driving performance was scored using a standardised assessment system by two “backseat” raters and the Vigil Vanguard system which provides objective measures of speed, braking and acceleration, cornering, and video-based footage from which eye and head movements and lane-keeping can be derived. Results: As compared to drivers with normal visual fields, drivers with hemianopia or quadrantanopia on average were significantly more likely to drive slower, to exhibit less excessive cornering forces or acceleration, and to execute more shoulder movements off the seat. Those hemianopic and quadrantanopic drivers rated as safe to drive by the backseat evaluator made significantly more excursive eye movements, exhibited more stable lane positioning, less sudden braking events and drove at higher speeds than those rated as unsafe, while there was no difference between safe and unsafe drivers in head movements. Conclusions: Persons with hemianopic and quadrantanopic field defects rated as safe to drive have different driving characteristics compared to those rated as unsafe when assessed using objective measures of driving performance.

How environmental and organizational complexity affects opportunity recognition and exploitation in development projects

Principal Topic: Project structures are often created by entrepreneurs and large corporate organizations to develop new products. Since new product development projects (NPDP) are more often situated within a larger organization, intrapreneurship or corporate entrepreneurship plays an important role in bringing these projects to fruition. Since NPDP often involves the development of a new product using immature technology, we describe development of an immature technology. The Joint Strike Fighter (JSF) F-35 aircraft is being developed by the U.S. Department of Defense and eight allied nations. In 2001 Lockheed Martin won a $19 billion contract to develop an affordable, stealthy and supersonic all-weather strike fighter designed to replace a wide range of aging fighter aircraft. In this research we define a complex project as one that demonstrates a number of sources of uncertainty to a degree, or level of severity, that makes it extremely difficult to predict project outcomes, to control or manage project (Remington & Zolin, Forthcoming). Project complexity has been conceptualized by Remington and Pollock (2007) in terms of four major sources of complexity; temporal, directional, structural and technological complexity (See Figure 1). Temporal complexity exists when projects experience significant environmental change outside the direct influence or control of the project. The Global Economic Crisis of 2008 - 2009 is a good example of the type of environmental change that can make a project complex as, for example in the JSF project, where project managers attempt to respond to changes in interest rates, international currency exchange rates and commodity prices etc. Directional complexity exists in a project where stakeholders' goals are unclear or undefined, where progress is hindered by unknown political agendas, or where stakeholders disagree or misunderstand project goals. In the JSF project all the services and all non countries have to agree to the specifications of the three variants of the aircraft; Conventional Take Off and Landing (CTOL), Short Take Off/Vertical Landing (STOVL) and the Carrier Variant (CV). Because the Navy requires a plane that can take off and land on an aircraft carrier, that required a special variant of the aircraft design, adding complexity to the project. Technical complexity occurs in a project using technology that is immature or where design characteristics are unknown or untried. Developing a plane that can take off on a very short runway and land vertically created may highly interdependent technological challenges to correctly locate, direct and balance the lift fans, modulate the airflow and provide equivalent amount of thrust from the downward vectored rear exhaust to lift the aircraft and at the same time control engine temperatures. These technological challenges make costing and scheduling equally challenging. Structural complexity in a project comes from the sheer numbers of elements such as the number of people, teams or organizations involved, ambiguity regarding the elements, and the massive degree of interconnectedness between them. While Lockheed Martin is the prime contractor, they are assisted in major aspects of the JSF development by Northrop Grumman, BAE Systems, Pratt & Whitney and GE/Rolls-Royce Fighter Engineer Team and innumerable subcontractors. In addition to identifying opportunities to achieve project goals, complex projects also need to identify and exploit opportunities to increase agility in response to changing stakeholder demands or to reduce project risks. Complexity Leadership Theory contends that in complex environments adaptive and enabling leadership are needed (Uhl-Bien, Marion and McKelvey, 2007). Adaptive leadership facilitates creativity, learning and adaptability, while enabling leadership handles the conflicts that inevitably arise between adaptive leadership and traditional administrative leadership (Uhl-Bien and Marion, 2007). Hence, adaptive leadership involves the recognition and opportunities to adapt, while and enabling leadership involves the exploitation of these opportunities. Our research questions revolve around the type or source of complexity and its relationship to opportunity recognition and exploitation. For example, is it only external environmental complexity that creates the need for the entrepreneurial behaviours, such as opportunity recognition and opportunity exploitation? Do the internal dimensions of project complexity, such as technological and structural complexity, also create the need for opportunity recognition and opportunity exploitation? The Kropp, Zolin and Lindsay model (2009) describes a relationship between entrepreneurial orientation (EO), opportunity recognition (OR), and opportunity exploitation (OX) in complex projects, with environmental and organizational contextual variables as moderators. We extend their model by defining the affects of external complexity and internal complexity on OR and OX. ---------- Methodology/Key Propositions: When the environment complex EO is more likely to result in OR because project members will be actively looking for solutions to problems created by environmental change. But in projects that are technologically or structurally complex project leaders and members may try to make the minimum changes possible to reduce the risk of creating new problems due to delays or schedule changes. In projects with environmental or technological complexity project leaders who encourage the innovativeness dimension of EO will increase OR in complex projects. But projects with technical or structural complexity innovativeness will not necessarily result in the recognition and exploitation of opportunities due to the over-riding importance of maintaining stability in the highly intricate and interconnected project structure. We propose that in projects with environmental complexity creating the need for change and innovation project leaders, who are willing to accept and manage risk, are more likely to identify opportunities to increase project effectiveness and efficiency. In contrast in projects with internal complexity a much higher willingness to accept risk will be necessary to trigger opportunity recognition. In structurally complex projects we predict it will be less likely to find a relationship between risk taking and OP. When the environment is complex, and a project has autonomy, they will be motivated to execute opportunities to improve the project's performance. In contrast, when the project has high internal complexity, they will be more cautious in execution. When a project experiences high competitive aggressiveness and their environment is complex, project leaders will be motivated to execute opportunities to improve the project's performance. In contrast, when the project has high internal complexity, they will be more cautious in execution. This paper reports the first stage of a three year study into the behaviours of managers, leaders and team members of complex projects. We conduct a qualitative study involving a Group Discussion with experienced project leaders. The objective is to determine how leaders of large and potentially complex projects perceive that external and internal complexity will influence the affects of EO on OR. ---------- Results and Implications: These results will help identify and distinguish the impact of external and internal complexity on entrepreneurial behaviours in NPDP. Project managers will be better able to quickly decide how and when to respond to changes in the environment and internal project events.

Virtual Environment Visualisation of Executable Business Process Models

Business Process Modelling is a fast growing field in business and information technology, which uses visual grammars to model and execute the processes within an organisation. However, many analysts present such models in a 2D static and iconic manner that is difficult to understand by many stakeholders. Difficulties in understanding such grammars can impede the improvement of processes within an enterprise due to communication problems. In this chapter we present a novel framework for intuitively visualising animated business process models in interactive Virtual Environments. We also show that virtual environment visualisations can be performed with present 2D business process modelling technology, thus providing a low barrier to entry for business process practitioners. Two case studies are presented from film production and healthcare domains that illustrate the ease with which these visualisations can be created. This approach can be generalised to other executable workflow systems, for any application domain being modelled.

Towards a method of constructing self-efficacy narratives.

This paper outlines a method of constructing narratives about an individual’s self-efficacy. Self-efficacy is defined as “people’s judgments of their capabilities to organise and execute courses of action required to attain designated types of performances” (Bandura, 1986, p. 391), and as such represents a useful construct for thinking about personal agency. Social cognitive theory provides the theoretical framework for understanding the sources of self-efficacy, that is, the elements that contribute to a sense of self-efficacy. The narrative approach adopted offers an alternative to traditional, positivist psychology, characterised by a preoccupation with measuring psychological constructs (like self-efficacy) by means of questionnaires and scales. It is argued that these instruments yield scores which are somewhat removed from the lived experience of the person—respondent or subject—associated with the score. The method involves a cyclical and iterative process using qualitative interviews to collect data from participants – four mature aged university students. The method builds on a three-interview procedure designed for life history research (Dolbeare & Schuman, cited in Seidman, 1998). This is achieved by introducing reflective homework tasks, as well as written data generated by research participants, as they are guided in reflecting on those experiences (including behaviours, cognitions and emotions) that constitute a sense of self-efficacy, in narrative and by narrative. The method illustrates how narrative analysis is used “to produce stories as the outcome of the research” (Polkinghorne, 1995, p.15), with detail and depth contributing to an appreciation of the ‘lived experience’ of the participants. The method is highly collaborative, with narratives co-constructed by researcher and research participants. The research outcomes suggest an enhanced understanding of self-efficacy contributes to motivation, application of effort and persistence in overcoming difficulties. The paper concludes with an evaluation of the research process by the students who participated in the author’s doctoral study.

Cooperative multi-AUV tracking of phytoplankton blooms based on ocean model predictions

In recent years, ocean scientists have started to employ many new forms of technology as integral pieces in oceanographic data collection for the study and prediction of complex and dynamic ocean phenomena. One area of technological advancement in ocean sampling if the use of Autonomous Underwater Vehicles (AUVs) as mobile sensor plat- forms. Currently, most AUV deployments execute a lawnmower- type pattern or repeated transects for surveys and sampling missions. An advantage of these missions is that the regularity of the trajectory design generally makes it easier to extract the exact path of the vehicle via post-processing. However, if the deployment region for the pattern is poorly selected, the AUV can entirely miss collecting data during an event of specific interest. Here, we consider an innovative technology toolchain to assist in determining the deployment location and executed paths for AUVs to maximize scientific information gain about dynamically evolving ocean phenomena. In particular, we provide an assessment of computed paths based on ocean model predictions designed to put AUVs in the right place at the right time to gather data related to the understanding of algal and phytoplankton blooms.

Modeling circulation of train-set with multiple routing

Planning on utilization of train-set is one of the key tasks of transport organization for passenger dedicated railway in China. It also has strong relationships with timetable scheduling and operation plans at a station. To execute such a task in a railway hub pooling multiple railway lines, the characteristics of multiple routing for train-set is discussed in term of semicircle of train-sets' turnover. In programming the described problem, the minimum dwell time is selected as the objectives with special derive constraints of the train-set's dispatch, the connecting conditions, the principle of uniqueness for train-sets, and the first plus for connection in the same direction based on time tolerance σ. A compact connection algorithm based on time tolerance is then designed. The feasibility of the model and the algorithm is proved by the case study. The result indicates that the circulation model and algorithm about multiple routing can deal with the connections between the train-sets of multiple directions, and reduce the train's pulling in or leaving impact on the station's throat.

The emerging management services of business transformation management

Business transformations are large-scale organizational change programs that, evidence suggests, are often unsuccessful. Our interest is in identifying the management capabilities required for the successful execution of these projects. We advance a service-oriented view of the enterprise, which suggests that different management services need to be identified and integrated in order to execute business transformation. In order to identify those management services that require integration, we conducted an exploratory empirical study of the demand for management services in US and Asia, and we show that two archetypes of management services exist in business transformation initiatives: transactional and transformational management services. We identify the relevant set of transactional and transformational services and discuss what the demand for these services implies for the execution of business transformations.

Enduring documents : improving the forms, improving the outcomes

Most Australian states have introduced legislation to provide for enduring documents for financial, personal and health care decision making in the event of incapacity. Since the introduction of Enduring Powers of Attorney (EPAs) and Advance Health Directives (AHDs) in Queensland in 1998, concerns have continued to be raised by service providers, professionals and individuals about the uptake, understanding and appropriate use of these documents. In response to these concerns, the Department of Justice and Attorney-General (DJAG) convened a Practical Guardianship Initiatives Working Party. This group identified the limited evidence base available to address these concerns. In 2009, a multidisciplinary research team from the University of Queensland and the Queensland University of Technology was awarded $90,000 from the Legal Practitioners Interest on Trust Account Fund to undertake a review of the current EPA and AHD forms. The goal of the research was to gather data on the content and useability of the forms from the perspectives of a range of stakeholders, particularly those completing the EPA and AHD, witnesses of these documents, attorneys appointed under an EPA, and health professionals involved in the completion of an AHD or dealing with it in a clinical context. The researchers also sought to gather information from the perspective of Aboriginal and Torres Strait Islander (ATSI) individuals as well people from culturally and linguistically diverse (CALD) groups. Although the focus of the research was on the forms and the extent to which the current design, content and format represents a barrier to uptake, in the course of the research, some broader issues were identified which have an impact on the effectiveness of the EPA and AHD in achieving the goals of planning for financial and personal and health care in advance of losing capacity. The data gathered enabled the researchers to achieve the primary goal of the research: to make recommendations to improve the content and useability of the forms which hopefully will lead to an increased uptake and appropriate use of the forms. However, the researchers thought it was important not to ignore broader policy issues that were identified in the course of the research. These broader issues have been highlighted in this Report, and the researchers have responded to them in a variety of ways. For some issues, the researchers have suggested alterations that could be made to the forms to address the particular concerns. For other issues, the researchers have suggested that Government may need to take specific action such as educating the broader community with some attention to strategies that engage particular groups within communities. Other concerns raised can only be dealt with by legislative reform and, in some of these cases, the researchers have identified issues that Government may wish to consider further. We do note, however, that it is beyond the scope of this Report to recommend changes to the law. This three stage mixed methods project aimed to provide systematic evidence from a broad range of stakeholders in regard to: (i) which groups use and do not use these documents and why, (ii) the contribution of the length/complexity/format/language of the forms as barriers to their completion and/or effective use, and (iii) the issues raised by the current documents for witnesses and attorneys. Understanding and use of EPAs and AHDs were generally explored in separate but parallel processes. A purposive sampling strategy included users of the documents as principals and attorneys, and professionals, witnesses and service providers who assist others to execute or use the forms. The first component of this study built on existing knowledge using a Critical Reference Group and material provided by the DJAG Practical Guardianship Initiatives Working Party. This assisted in the development of the data collection tools for subsequent stages. The second component comprised semi-structured interviews and focus groups with a targeted sample of current users of the forms, potential users, witnesses and other professionals to provide in-depth information on critical issues. Outreach to Aboriginal and Torres Strait Islander Elders and individuals and workers with CALD groups ensured a broad sample of potential users of the two documents. Fifty individual interviews and three focus groups were completed. Most interviews and focus groups focused on perceptions of, and experiences with, either the EPA or the AHD form. In the interviews with Indigenous people and the CALD focus groups, however, respondents provided their perceptions and experiences of both documents. In general, these respondents had not used the forms and were responding to the documents made available in the interview or focus group. In total, seventy-seven individuals were involved in interviews or focus groups. The final component comprised on-line surveys for EPA principals, EPA attorneys, AHD principals, witnesses of EPAs and AHDs and medical practitioners with experience of AHDs as nominated and/or treating doctors. The surveys were developed from the initial component and the qualitative analysis of the interview and focus group data. A total of 116 surveys were returned from major cities and regional Queensland. The survey data was analysed descriptively for patterns and trends. It is important to note that the aim of the survey was to gain insight into issues and concerns relating to the documents and not to make generalisations to the broader population.

A mask-based approach for the geometric calibration of thermal-infrared cameras

Accurate and efficient thermal-infrared (IR) camera calibration is important for advancing computer vision research within the thermal modality. This paper presents an approach for geometrically calibrating individual and multiple cameras in both the thermal and visible modalities. The proposed technique can be used to correct for lens distortion and to simultaneously reference both visible and thermal-IR cameras to a single coordinate frame. The most popular existing approach for the geometric calibration of thermal cameras uses a printed chessboard heated by a flood lamp and is comparatively inaccurate and difficult to execute. Additionally, software toolkits provided for calibration either are unsuitable for this task or require substantial manual intervention. A new geometric mask with high thermal contrast and not requiring a flood lamp is presented as an alternative calibration pattern. Calibration points on the pattern are then accurately located using a clustering-based algorithm which utilizes the maximally stable extremal region detector. This algorithm is integrated into an automatic end-to-end system for calibrating single or multiple cameras. The evaluation shows that using the proposed mask achieves a mean reprojection error up to 78% lower than that using a heated chessboard. The effectiveness of the approach is further demonstrated by using it to calibrate two multiple-camera multiple-modality setups. Source code and binaries for the developed software are provided on the project Web site.

'The war of Canudos: a Euclidean interpretation.' [Guerra de Canudos: uma leitura euclidiana]

The publication of the book The interior, in 1902, would change the course of thinking about the War of Canudos, who for many years, had been known simply as' the history of Euclid. President Getulio Vargas became interested in the backwoods bloodbath after reading the book avenger-Euclidean. Liked the work he visited the place of occurrence of war promising enjoy the river poured-Barris with the construction of the weir Cocorobo. Euclides da Cunha lived and produced his work in a time of great change in thought, politics and technology. Despite having worked in the press throughout his life, was best known as an engineer, for having exercised the office during the reconstruction of the bridge, in Sao Jose do Rio Pardo. This article aims to illuminate the event of war in light of the Euclidean work. We will examine the trajectory of Euclides da Cunha in journalism. Your learning process to execute the office newsreader and war correspondent, the newspaper O Estado de S. Paul, as well as their reports and work-monument the hinterlands. Resumo: A publicação da obra Os sertões, em 1902, mudaria os rumos do pensamento sobre a Guerra de Canudos, que, por muitos anos, ficara conhecida, simplesmente, como ‘história de Euclides’. O presidente Getúlio Vargas interessou-se pela hecatombe sertaneja após ter lido o livro-vingador euclidiano. Gostou tanto da obra que visitou o lugar de acontecimento da guerra prometendo aproveitar as águas do rio Vaza-Barris com a construção do açude de Cocorobó. Euclides da Cunha viveu e produziu a sua obra em um momento de grandes transformações no pensamento, na política e na tecnologia. Apesar de ter atuado na imprensa ao longo de toda a sua vida, ficou mais conhecido como engenheiro, por ter exercido o ofício, durante a reconstrução da ponte, em São José do Rio Pardo. O presente artigo visa iluminar o acontecimento da guerra à luz da obra euclidiana. Examinaremos a trajetória de Euclides da Cunha no jornalismo. O seu processo de aprendizagem para exercer o ofício de noticiarista e correspondente de guerra, pelo jornal O Estado de S. Paulo, bem como, as suas reportagens e obra-monumento Os sertões.

A context sensitive model for querying linked scientific data

This thesis provides a query model suitable for context sensitive access to a wide range of distributed linked datasets which are available to scientists using the Internet. The model is designed based on scientific research standards which require scientists to provide replicable methods in their publications. Although there are query models available that provide limited replicability, they do not contextualise the process whereby different scientists select dataset locations based on their trust and physical location. In different contexts, scientists need to perform different data cleaning actions, independent of the overall query, and the model was designed to accommodate this function. The query model was implemented as a prototype web application and its features were verified through its use as the engine behind a major scientific data access site, Bio2RDF.org. The prototype showed that it was possible to have context sensitive behaviour for each of the three mirrors of Bio2RDF.org using a single set of configuration settings. The prototype provided executable query provenance that could be attached to scientific publications to fulfil replicability requirements. The model was designed to make it simple to independently interpret and execute the query provenance documents using context specific profiles, without modifying the original provenance documents. Experiments using the prototype as the data access tool in workflow management systems confirmed that the design of the model made it possible to replicate results in different contexts with minimal additions, and no deletions, to query provenance documents.

Experiences with implementing common mathematical operations using field programmable gate arrays

Many computationally intensive scientific applications involve repetitive floating point operations other than addition and multiplication which may present a significant performance bottleneck due to the relatively large latency or low throughput involved in executing such arithmetic primitives on commod- ity processors. A promising alternative is to execute such primitives on Field Programmable Gate Array (FPGA) hardware acting as an application-specific custom co-processor in a high performance reconfig- urable computing platform. The use of FPGAs can provide advantages such as fine-grain parallelism but issues relating to code development in a hardware description language and efficient data transfer to and from the FPGA chip can present significant application development challenges. In this paper, we discuss our practical experiences in developing a selection of floating point hardware designs to be implemented using FPGAs. Our designs include some basic mathemati cal library functions which can be implemented for user defined precisions suitable for novel applications requiring non-standard floating point represen- tation. We discuss the details of our designs along with results from performance and accuracy analysis tests.

Supporting risk-informed decisions during business process execution

This paper proposes a technique that supports process participants in making risk-informed decisions, with the aim to reduce the process risks. Risk reduction involves decreasing the likelihood and severity of a process fault from occurring. Given a process exposed to risks, e.g. a financial process exposed to a risk of reputation loss, we enact this process and whenever a process participant needs to provide input to the process, e.g. by selecting the next task to execute or by filling out a form, we prompt the participant with the expected risk that a given fault will occur given the particular input. These risks are predicted by traversing decision trees generated from the logs of past process executions and considering process data, involved resources, task durations and contextual information like task frequencies. The approach has been implemented in the YAWL system and its effectiveness evaluated. The results show that the process instances executed in the tests complete with substantially fewer faults and with lower fault severities, when taking into account the recommendations provided by our technique.

Smartphone malware evolution revisited : Android next target?

Smartphones started being targets for malware in June 2004 while malware count increased steadily until the introduction of a mandatory application signing mechanism for Symbian OS in 2006. From this point on, only few news could be read on this topic. Even despite of new emerging smartphone platforms, e.g. android and iPhone, malware writers seemed to lose interest in writing malware for smartphones giving users an unappropriate feeling of safety. In this paper, we revisit smartphone malware evolution for completing the appearance list until end of 2008. For contributing to smartphone malware research, we continue this list by adding descriptions on possible techniques for creating the first malware(s) for Android platform. Our approach involves usage of undocumented Android functions enabling us to execute native Linux application even on retail Android devices. This can be exploited to create malicious Linux applications and daemons using various methods to attack a device. In this manner, we also show that it is possible to bypass the Android permission system by using native Linux applications.

Deficiencies of scope statements in ITLET standardization

To execute good design one not only needs to know what to do and how to do it, but also why it should be done. For a standardization expert the rationale of a standardization project may be found in the proposal for a new work item or terms of reference, but rarely in the scope statement. However, it is also commonplace that the rationale of the project is not clearly stated in any of these parts. If the rationale is not surfaced in the early phases of a project, it is left to the design, sense-making and negotiation cycles of the design process to orient the project towards a goal. This paper explores how scope statements are used to position standardization projects in the IT for Learning, Education and Training (ITLET) domain, and how scope and rationale are understood in recent projects in European and international standardization. Based on two case-studies the paper suggests some actions for further research and improvement of the process.