End-of-life care in the critical care setting : nurses' practices and factors affecting these practices

Background: Critical care units are designed and resourced to save lives, yet the provision of end-of-life care is a significant component of nursing work in these settings. Limited research has investigated the actual practices of critical care nurses in the provision of end-of-life care, or the factors influencing these practices. To improve the care that patients at the end of life and their families receive, and to support nurses in the provision of this care, further research is needed. The purpose of this study was to identify critical care nurses' end-of-life care practices, the factors influencing the provision of end-of-life care and the factors associated with specific end-of-life care practices. Methods: A three-phase exploratory sequential mixed-methods design was utilised. Phase one used a qualitative approach involving interviews with a convenience sample of five intensive care nurses to identify their end-of-life care experiences and practices. In phase two, an online survey instrument was developed, based on a review of the literature and the findings of phase one. The survey instrument was reviewed by six content experts and pilot tested with a convenience sample of 28 critical care nurses (response rate 45%) enrolled in a postgraduate critical care nursing subject. The refined survey instrument was used in phase three of this study to conduct a national survey of critical care nurses. Descriptive analyses, exploratory factor analysis and univariate general linear modelling was undertaken on completed survey responses from 392 critical care nurses (response rate 25%). Results: Six end-of-life care practice areas were identified in this study: information sharing, environmental modification, emotional support, patient and family-centred decision making, symptom management and spiritual support. The items most frequently identified as always undertaken by critical care nurses in the provision of end-of-life care were from the information sharing and environmental modification practice areas. Items least frequently identified as always undertaken included items from the emotional support practice area. Eight factors influencing the provision of end-of-life care were identified: palliative values, patient and family preferences, knowledge, preparedness, organisational culture, resources, care planning, and emotional support for nurses. Strong agreement was noted with items reflecting values consistent with a palliative approach and inclusion of patient and family preferences. Variation was noted in agreement for items regarding opportunities for knowledge acquisition in the workplace and formal education, yet most respondents agreed that they felt adequately prepared. A context of nurse-led practice was identified, with variation in access to resources noted. Collegial support networks were identified as a source of emotional support for critical care nurses. Critical care nurses reporting values consistent with a palliative approach and/or those who scored higher on support for patient and family preferences were more likely to be engaged in end-of-life care practice areas identified in this study. Nurses who reported higher levels of preparedness and access to opportunities for knowledge acquisition were more likely to report engaging in interpersonal practices that supported patient and family centred decision making and emotional support of patients and their families. A negative relationship was identified between the explanatory variables of emotional support for nurses and death anxiety, and the patient and family centred decision making practice area. Contextual factors had a limited influence as explanatory variables of specific end-of-life care practice areas. Gender was identified as a significant explanatory variable in the emotional and spiritual support practice areas, with male gender associated with lower summated scores on these practice scales. Conclusions: Critical care nurses engage in practices to share control with and support inclusion of families experiencing death and dying. The most frequently identified end-of-life care practices were those that are easily implemented, practical strategies aimed at supporting the patient at the end of life and the patient's family. These practices arguably require less emotional engagement by the nurse. Critical care nurses' responses reflected values consistent with a palliative approach and a strong commitment to the inclusion of families in end-of-life care, and these factors were associated with engagement in all end-of-life care practice areas. Perceived preparedness or confidence with the provision of end-of-life care was associated with engagement in interpersonal caring practices. Critical care nurses autonomously engage in the provision of end-of-life care within the constraints of an environment designed for curative care and rely on their colleagues for emotional support. Critical care nurses must be adequately prepared and supported to provide comprehensive care in all areas of end-of-life care practice. The findings of this study raise important implications, and informed recommendations for practice, education and further research.

End-of-life care practices of critical care nurses: A national cross-sectional survey

Background: The critical care context presents important opportunities for nurses to deliver skilled, comprehensive care to patients at the end of life and their families. Limited research has identified the actual end-of-life care practices of critical care nurses. Objective: To identify the end-of-life care practices of critical care nurses. Design: A national cross-sectional online survey. Methods: The survey was distributed to members of an Australian critical care nursing association and 392 critical care nurses (response rate 25%) completed the survey. Exploratory factor analysis using principal axis factoring with oblique rotation was undertaken on survey responses to identify the domains of end-of-life care practice. Descriptive statistics were calculated for individual survey items. Results: Exploratory factor analysis identified six domains of end-of-life care practice: information sharing, environmental modification, emotional support, patient and family centred decision-making, symptom management and spiritual support. Descriptive statistics identified a high level of engagement in information sharing and environmental modification practices and less frequent engagement in items from the emotional support and symptom management practice areas. Conclusions: The findings of this study identified domains of end-of-life care practice, and critical care nurse engagement in these practices. The findings highlight future training and practice development opportunities, including the need for experiential learning targeting the emotional support practice domain. Further research is needed to enhance knowledge of symptom management practices during the provision of end-of-life care to inform and improve practice in this area.

Feasibility of a stepped wedge cluster RCT and concurrent observational sub-study to evaluate the effects of modified ward night lighting on inpatient fall rates and sleep quality: A protocol for a pilot trial

Background: Falls among hospitalised patients impose a considerable burden on health systems globally and prevention is a priority. Some patient-level interventions have been effective in reducing falls, but others have not. An alternative and promising approach to reducing inpatient falls is through the modification of the hospital physical environment and the night lighting of hospital wards is a leading candidate for investigation. In this pilot trial, we will determine the feasibility of conducting a main trial to evaluate the effects of modified night lighting on inpatient ward level fall rates. We will test also the feasibility of collecting novel forms of patient level data through a concurrent observational sub-study. Methods/design: A stepped wedge, cluster randomised controlled trial will be conducted in six inpatient wards over 14 months in a metropolitan teaching hospital in Brisbane (Australia). The intervention will consist of supplementary night lighting installed across all patient rooms within study wards. The planned placement of luminaires, configurations and spectral characteristics are based on prior published research and pre-trial testing and modification. We will collect data on rates of falls on study wards (falls per 1000 patient days), the proportion of patients who fall once or more, and average length of stay. We will recruit two patients per ward per month to a concurrent observational sub-study aimed at understanding potential impacts on a range of patient sleep and mobility behaviour. The effect on the environment will be monitored with sensors to detect variation in light levels and night-time room activity. We will also collect data on possible patient-level confounders including demographics, pre-admission sleep quality, reported vision, hearing impairment and functional status. Discussion: This pragmatic pilot trial will assess the feasibility of conducting a main trial to investigate the effects of modified night lighting on inpatient fall rates using several new methods previously untested in the context of environmental modifications and patient safety. Pilot data collected through both parts of the trial will be utilised to inform sample size calculations, trial design and final data collection methods for a subsequent main trial.

Modelling end-of-life care practices: Factors associated with critical care nurse engagement in care provision

Objective To identify factors associated with critical care nurses’ engagement in end-of-life care practices. Methods Multivariable regression modelling was undertaken on 392 responses to an online self-report survey of end-of-life care practices and factors influencing practice by Australian critical care nurses’. Univariate general linear models were built for six end-of-life care practice areas. Results Six statistically significant (p < 0.001) models were developed: Information sharing F(3, 377) = 40.53, adjusted R2 23.8%; Environmental modification F(5, 380) = 19.55, adjusted R2 19.4%; Emotional support F(10, 366) = 12.10, adjusted R2 22.8%; Patient and family centred decision making F(8, 362) = 17.61 adjusted R2 26.4%; Symptom management F(8, 376) = 7.10, adjusted R2 11.3%; and Spiritual support F(9, 367) = 14.66, adjusted R2 24.6%. Stronger agreement with values consistent with a palliative approach, and greater support for patient and family preferences were associated with higher levels of engagement in end-of-life care practices. Higher levels of preparedness and access to opportunities for knowledge acquisition were associated with engagement in the interpersonal practices of patient and family centred decision making and emotional support. Conclusion This study provides evidence for interventions to address factors associated with nurse engagement to increase participation in all end-of-life care practice areas.

An autecological interpretation of the firm and its environment

Explaining the survival and failure of firms is an important issue for researchers and managers of firms in society. Ecological approaches to the study of firms have existed for over 100 years, and have been increasingly popular during the past 40 years, especially since the pioneering works of Hannan and Freeman on one hand, and Aldrich on the other. This paper, in keeping with recent developments elsewhere in mainstream ecology outlines and positions the theoretical and philosophical foundations of an alternative ecological approach, autecology, that has not yet been formulated for the study of firms. The autecological approach affords the individual firm more autonomy in creating its own future evolutionary trajectory. The idea of an ecological complex is developed to provide clear focus on what is central to the application of autecology to the study of firms. The paper also considers several emergent research opportunities that highlight the potential value of employing an autecological approach to the study of firms.

Modification and validation of a microwave-assisted digestion method for subsequent ICP-MS determination of selected heavy metals in sediment and fish samples in Agusan River, Philippines

This study investigated, validated, and applied the optimum conditions for a modified microwave assisted digestion method for subsequent ICP-MS determination of mercury, cadmium, and lead in two matrices relevant to water quality, that is, sediment and fish. Three different combinations of power, pressure, and time conditions for microwave-assisted digestion were tested, using two certified reference materials representing the two matrices, to determine the optimum set of conditions. Validation of the optimized method indicated better recovery of the studied metals compared to standard methods. The validated method was applied to sediment and fish samples collected from Agusan River and one of its tributaries, located in Eastern Mindanao, Philippines. The metal concentrations in sediment ranged from 2.85 to 341.06 mg/kg for Hg, 0.05 to 44.46 mg/kg for Cd and 2.20 to 1256.16 mg/kg for Pb. The results indicate that the concentrations of these metals in the sediments rapidly decrease with distance downstream from sites of contamination. In the selected fish species, the metals were detected but at levels that are considered safe for human consumption, with concentrations of 2.14 to 6.82 μg/kg for Hg, 0.035 to 0.068 μg/kg for Cd, and 0.019 to 0.529 μg/kg for Pb.

Functionalised zinc oxide nanowire gas sensors : enhanced NO2 gas sensor response by chemical modification of nanowire surfaces

Surface coating with an organic self-assembled monolayer (SAM) can enhance surface reactions or the absorption of specific gases and hence improve the response of a metal oxide (MOx) sensor toward particular target gases in the environment. In this study the effect of an adsorbed organic layer on the dynamic response of zinc oxide nanowire gas sensors was investigated. The effect of ZnO surface functionalisation by two different organic molecules, tris(hydroxymethyl)aminomethane (THMA) and dodecanethiol (DT), was studied. The response towards ammonia, nitrous oxide and nitrogen dioxide was investigated for three sensor configurations, namely pure ZnO nanowires, organic-coated ZnO nanowires and ZnO nanowires covered with a sparse layer of organic-coated ZnO nanoparticles. Exposure of the nanowire sensors to the oxidising gas NO2 produced a significant and reproducible response. ZnO and THMA-coated ZnO nanowire sensors both readily detected NO2 down to a concentration in the very low ppm range. Notably, the THMA-coated nanowires consistently displayed a small, enhanced response to NO2 compared to uncoated ZnO nanowire sensors. At the lower concentration levels tested, ZnO nanowire sensors that were coated with THMA-capped ZnO nanoparticles were found to exhibit the greatest enhanced response. ΔR/R was two times greater than that for the as-prepared ZnO nanowire sensors. It is proposed that the ΔR/R enhancement in this case originates from the changes induced in the depletion-layer width of the ZnO nanoparticles that bridge ZnO nanowires resulting from THMA ligand binding to the surface of the particle coating. The heightened response and selectivity to the NO2 target are positive results arising from the coating of these ZnO nanowire sensors with organic-SAM-functionalised ZnO nanoparticles.

Metabolic and ecological study of environmental pentose utilizing bacteria (E-PUB)

Lignocellulosic materials, such as sugar cane bagasse, a waste product of the sugarcane processing industry, agricultural residues and herbaceous crops, may serve as an abundant and comparatively cheap feedstock for largescale industrial fermentation, resulting in the production of marketable end-products. However, the complex structure of lignocellulosic materials, the presence of various hexose and pentose sugars in the hemicellulose component, and the presence of various compounds that inhibit the organisms selected for the fermentation process, all constitute barriers that add to the production costs and make full scale industrial production economically less feasible. The work presented in this thesis was conducted in order to screen microorganisms for ability to utilize pentose sugars derived from the sugar mill industrial waste. A large number of individual bacterial strains were investigated from hemi-cellulose rich material collected at the Proserpine and Maryborough sugar mills, notably soil samples from the mill sites. The research conducted to isolation of six pentose-capable Gram-positive organisms from the actinomycetes group by using pentose as a sole carbon source in the cultivation process. The isolates were identified as Corynebacterium glutamicum, Actinomyces odontolyticus, Nocardia elegans, and Propionibacterium freudenreichii all of which were isolated from the hemicellulose-enriched soil. Pentose degrading microbes are very rare in the environment, so this was a significant discovery. Previous research indicated that microbes could degrade pentose after genetic modification but the microbes discovered in this research were able to naturally utilize pentose. Six isolates, identified as four different genera, were investigated for their ability to utilize single sugars as substrates (glucose, xylose, arabinose or ribose), and also dual sugars as substrates (a hexose plus a pentose). The results demonstrated that C. glutamicum, A. odontolyticus, N. elegans, and P. freudenreichii were pentose-capable (able to grow using xylose or other pentose sugar), and also showed diauxie growth characteristics during the dual-sugar (glucose, in combination with xylose, arabinose or ribose) carbon source tests. In addition, it was shown that the isolates displayed very small differences in growth rates when grown on dual sugars as compared to single sugars, whether pentose or hexose in nature. The anabolic characteristics of C. glutamicum, A. odontolyticus, N. elegans and P. freudenreichii were subsequently investigated by qualitative analysis of their end-products, using high performance liquid chromatography (HPLC). All of the organisms produced arginine and cysteine after utilization of the pentose substrates alone. In addition, P. freudenreichii produced alanine and glycine. The end-product profile arising from culture with dual carbon sources was also tested. Interestingly, this time the product was different. All of them produced the amino acid glycine, when grown on a combination substrate-mix of glucose with xylose, and also glucose with arabinose. Only N. elegans was able to break down ribose, either singly or in combination with glucose, and the end-product of metabolism of the glucose plus ribose substrate combination was glutamic acid. The ecological analysis of microbial abundance in sugar mill waste was performed using denaturing gradient gel electrophoresis (DGGE) and also the metagenomic microarray PhyloChip method. Eleven solid samples and seven liquid samples were investigated. A very complex bacterial ecosystem was demonstrated in the seven liquid samples after testing with the PhyloChip method. It was also shown that bagasse leachate was the most different, compared to all of the other samples, by virtue of its richness in variety of taxa and the complexity of its bacterial community. The bacterial community in solid samples from Proserpine, Mackay and Maryborough sugar mills showed huge diversity. The information found from 16S rDNA sequencing results was that the bacterial genera Brevibacillus, Rhodospirillaceae, Bacillus, Vibrio and Pseudomonas were present in greatest abundance. In addition, Corynebacterium was also found in the soil samples. The metagenomic studies of the sugar mill samples demonstrate two important outcomes: firstly that the bagasse leachate, as potentially the most pentose-rich sample tested, had the most complex and diverse bacterial community; and secondly that the pentose-capable isolates that were initially discovered at the beginning of this study, were not amongst the most abundant taxonomic groups discovered in the sugar mill samples, and in fact were, as suspected, very rare. As a bioprospecting exercise, therefore, the study has discovered organisms that are naturally present, but in very small numbers, in the appropriate natural environment. This has implications for the industrial application of E-PUB, in that a seeding process using a starter culture will be necessary for industrial purposes, rather than simply assuming that natural fermentation might occur.

A combined environmental scanning electron microscopy and Raman microscopy study of methanol oxidation on silver(I) oxide

The techniques of environmental scanning electron microscopy (ESEM) and Raman microscopy have been used to respectively elucidate the morphological changes and nature of the adsorbed species on silver(I) oxide powder, during methanol oxidation conditions. Heating Ag2O in either water vapour or oxygen resulted firstly in the decomposition of silver(I) oxide to polycrystalline silver at 578 K followed by sintering of the particles at higher temperature. Raman spectroscopy revealed the presence of subsurface oxygen and hydroxyl species in addition to surface hydroxyl groups after interaction with water vapour. Similar species were identified following exposure to oxygen in an ambient atmosphere. This behaviour indicated that the polycrystalline silver formed from Ag2O decomposition was substantially more reactive than silver produced by electrochemical methods. The interaction of water at elevated temperatures subsequent to heating silver(I) oxide in oxygen resulted in a significantly enhanced concentration of subsurface hydroxyl species. The reaction of methanol with Ag2O at high temperatures was interesting in that an inhibition in silver grain growth was noted. Substantial structural modification of the silver(I) oxide material was induced by catalytic etching in a methanol/air mixture. In particular, "pin-hole" formation was observed to occur at temperatures in excess of 773 K, and it was also recorded that these "pin- holes" coalesced to form large-scale defects under typical industrial reaction conditions. Raman spectroscopy revealed that the working surface consisted mainly of subsurface oxygen and surface Ag=O species. The relative lack of sub-surface hydroxyl species suggested that it was the desorption of such moieties which was the cause of the "pin-hole" formation.

An analysis of DNA methylation in human adipose tissue reveals differential modification of obesity genes before and after gastric bypass and weight loss

Background Environmental factors can influence obesity by epigenetic mechanisms. Adipose tissue plays a key role in obesity-related metabolic dysfunction, and gastric bypass provides a model to investigate obesity and weight loss in humans. Results Here, we investigate DNA methylation in adipose tissue from obese women before and after gastric bypass and significant weight loss. In total, 485,577 CpG sites were profiled in matched, before and after weight loss, subcutaneous and omental adipose tissue. A paired analysis revealed significant differential methylation in omental and subcutaneous adipose tissue. A greater proportion of CpGs are hypermethylated before weight loss and increased methylation is observed in the 3′ untranslated region and gene bodies relative to promoter regions. Differential methylation is found within genes associated with obesity, epigenetic regulation and development, such as CETP, FOXP2, HDAC4, DNMT3B, KCNQ1 and HOX clusters. We identify robust correlations between changes in methylation and clinical trait, including associations between fasting glucose and HDAC4, SLC37A3 and DENND1C in subcutaneous adipose. Genes investigated with differential promoter methylation all show significantly different levels of mRNA before and after gastric bypass. Conclusions This is the first study reporting global DNA methylation profiling of adipose tissue before and after gastric bypass and associated weight loss. It provides a strong basis for future work and offers additional evidence for the role of DNA methylation of adipose tissue in obesity.

Protocol for assessing maternal, environmental and epigenetic risk factors for dental caries in children

Background Expenditure on dental and oral health services in Australia is $3.4 billion AUD annually. This is the sixth highest health cost and accounts for 7 % of total national health expenditure. Approximately 49 % of Australian children aged 6 years have caries experience in their deciduous teeth and this is rising. The aetiology of dental caries involves a complex interplay of individual, behavioural, social, economic, political and environmental conditions, and there is increasing interest in genetic predisposition and epigenetic modification. Methods The Oral Health Sub-study; a cross sectional study of a birth cohort began in November 2012 by examining mothers and their children who were six years old by the time of initiation of the study, which is ongoing. Data from detailed questionnaires of families from birth onwards and data on mothers’ knowledge, attitudes and practices towards oral health collected at the time of clinical examination are used. Subjects’ height, weight and mid-waist circumference are taken and Body Mass Index (BMI) computed, using an electronic Bio-Impedance balance. Dental caries experience is scored using the International Caries Detection and Assessment System (ICDAS). Saliva is collected for physiological measures. Salivary Deoxyribose Nucleic Acid (DNA) is extracted for genetic studies including epigenetics using the SeqCap Epi Enrichment Kit. Targets of interest are being confirmed by pyrosequencing to identify potential epigenetic markers of caries risk. Discussion This study will examine a wide range of potential determinants for childhood dental caries and evaluate inter-relationships amongst them. The findings will provide an evidence base to plan and implement improved preventive strategies.

In Situ Observation of the Thermal Decomposition of Weddelite by Heating Stage Environmental Scanning Electron Microscopy

The morphological and chemical changes occurring during the thermal decomposition of weddelite, CaC2O4·2H2O, have been followed in real time in a heating stage attached to an Environmental Scanning Electron Microscope operating at a pressure of 2 Torr, with a heating rate of 10 °C/min and an equilibration time of approximately 10 min. The dehydration step around 120 °C and the loss of CO around 425 °C do not involve changes in morphology, but changes in the composition were observed. The final reaction of CaCO3 to CaO while evolving CO2 around 600 °C involved the formation of chains of very small oxide particles pseudomorphic to the original oxalate crystals. The change in chemical composition could only be observed after cooling the sample to 350 °C because of the effects of thermal radiation.