Fingering Instabilities in Dewetting Nanofluids

The growth of fingering patterns in dewetting nanofluids (colloidal solutions of thiol-passivated gold nanoparticles) has been followed in real time using contrast-enhanced video microscopy. The fingering instability on which we focus here arises from evaporatively-driven nucleation and growth a nanoscopically thin "precursor" solvent film behind the macroscopic contact line. We find that well-developed isotropic fingering structures only form for a narrow range of experimental parameters. Numerical simulations, based on a modification of the Monte Carlo approach introduced by Rabani et al. [Nature 426, 271 (2003)], reproduce the patterns we observe experimentally.

Controlling Pattern Formation in Nanoparticle Assemblies via Directed Solvent Dewetting

We have achieved highly localised control of pattern formation in two dimensional nanoparticle assemblies by direct modification of solvent dewetting dynamics. A striking dependence of nanoparticle organisation on the size of atomic force microscope-generated surface heterogeneities is observed and reproduced in numerical simulations. Nanoscale features induce rupture of the solvent-nanoparticle film, causing the local flow of solvent to carry nanoparticles into confinement. Microscale heterogeneities instead slow the evaporation of the solvent, producing a remarkably abrupt interface between different nanoparticle patterns.

Reclaiming Academia from Post-academia

Post-academic science, driven as it is by commercialisation and market forces, is fundamentally at odds with core academic principles. Publicly-funded academics have an obligation to carry out science for the public good, a responsibility which is incompatible with the entrepreneurial ethos increasingly expected of university research by funding agencies.

Anisotropic Assembly of Colloidal Nanoparticles: Exploiting Substrate Crystallinity

We show that the crystal structure of a substrate can be exploited to drive the anisotropic assembly of colloidal nanoparticles. Pentanethiol-passivated Au particles of approximately 2 nm diameter deposited from toluene onto hydrogen-passivated Si(111) surfaces form linear assemblies (rods) with a narrow width distribution. The rod orientations mirror the substrate symmetry, with a high degree of alignment along principal crystallographic axes of the Si(111) surface. There is a strong preference for anisotropic growth with rod widths substantially more tightly distributed than lengths. Entropic trapping of nanoparticles provides a plausible explanation for the formation of the anisotropic assemblies we observe.

Nanotechnology: radical new science or plus ça change?

Is a radical nanotechnology involving the construction of macroscopic products via software-directed manipulation of single molecules possible? Are we only a few decades away from a technological utopia where virtually any product may be constructed via molecular manufacturing? These and other similarly provocative questions formed the backdrop for a well-attended debate on nanotechnology held in the University of Nottingham last year (26 August 2005).

Coerced Mechanical Coarsening of Nanoparticle Assemblies

Coarsening is a ubiquitous phenomenon [1-3] that underpins countless processes in nature, including epitaxial growth [1,3,4], the phase separation of alloys, polymers and binary fluids [2], the growth of bubbles in foams5, and pattern formation in biomembranes6. Here we show, in the first real-time experimental study of the evolution of an adsorbed colloidal nanoparticle array, that tapping-mode atomic force microscopy (TM-AFM) can drive the coarsening of Au nanoparticle assemblies on silicon surfaces. Although the growth exponent has a strong dependence on the initial sample morphology, our observations are largely consistent with modified Ostwald ripening processes [7-9]. To date, ripening processes have been exclusively considered to be thermally activated, but we show that nanoparticle assemblies can be mechanically coerced towards equilibrium, representing a new approach to directed coarsening. This strategy enables precise control over the evolution of micro- and nanostructures.

A Mixed Discontinuous Galerkin Method for Incompressible Magnetohydrodynamics

We introduce and analyze a discontinuous Galerkin method for the numerical discretization of a stationary incompressible magnetohydrodynamics model problem. The fluid unknowns are discretized with inf-sup stable discontinuous P^3_{k}-P_{k-1} elements whereas the magnetic part of the equations is approximated by discontinuous P^3_{k}-P_{k+1} elements. We carry out a complete a-priori error analysis and prove that the energy norm error is convergent of order O(h^k) in the mesh size h. We also show that the method is able to correctly capture and resolve the strongest magnetic singularities in non-convex polyhedral domains. These results are verified in a series of numerical experiments.

An A Posteriori Error Indicator for Discontinuous Galerkin Approximations of Fourth Order Elliptic Problems

We introduce a residual-based a posteriori error indicator for discontinuous Galerkin discretizations of the biharmonic equation with essential boundary conditions. We show that the indicator is both reliable and efficient with respect to the approximation error measured in terms of a natural energy norm, under minimal regularity assumptions. We validate the performance of the indicator within an adaptive mesh refinement procedure and show its asymptotic exactness for a range of test problems.

Rail passenger crowding, stress, health and safety in Britain

There has long been a question as to whether crowding in rail passenger transport poses a threat to passenger health related to the experience of stress. A review of the scientific literature was conducted. Little rail-specific empirical research was identified. The more general research that does exist suggests that high-density environments are not necessarily perceived as crowded and that stress-related physiological, psychological and behavioural reactions do not necessarily follow from exposure to such environments. Several factors are identified that may moderate the impact of a high-density environment on perceptions of crowding and the subsequent experience and effects of stress. These include, inter alia, perceptions of control and predictability of events. However, if caused, the experience and effects of stress may be made worse by inadequate coach design that gives rise to discomfort. The model that emerges from these findings offers a suitable framework for the development of research questions that should help translate emerging knowledge into practical interventions, for the reduction of any adverse health outcomes associated with crowding.

Organizational, systems and human issues in production planning, scheduling and control

With global markets and global competition, pressures are placed on manufacturing organizations to compress order fulfillment times, meet delivery commitments consistently and also maintain efficiency in operations to address cost issues. This chapter argues for a process perspective on planning, scheduling and control that integrates organizational planning structures, information systems as well as human decision makers. The chapter begins with a reconsideration of the gap between theory and practice, in particular for classical scheduling theory and hierarchical production planning and control. A number of the key studies of industrial practice are then described and their implications noted. A recent model of scheduling practice derived from a detailed study of real businesses is described. Socio-technical concepts are then introduced and their implications for the design and management of planning, scheduling and control systems are discussed. The implications of adopting a process perspective are noted along with insights from knowledge management. An overview is presented of a methodology for the (re-)design of planning, scheduling and control systems that integrates organizational, system and human perspectives. The most important messages from the chapter are then summarized.

Seeing it my way: a case of a selective deficit in inhibiting self-perspective

Little is known about the functional and neural architecture of social reasoning, one major obstacle being that we crucially lack the relevant tools to test potentially different social reasoning components. In the case of belief reasoning, previous studies tried to separate the processes involved in belief reasoning per se from those involved in the processing of the high incidental demands such as the working memory demands of typical belief tasks (e.g., Stone et al., 1998; Samson et al., 2004). In this study, we developed new belief tasks in order to disentangle, for the first time, two perspective taking components involved in belief reasoning: (1) the ability to inhibit one’s own perspective (self-perspective inhibition) and (2) the ability to infer someone else’s perspective as such (other-perspective taking). The two tasks had similar demands in other-perspective taking as they both required the participant to infer that a character has a false belief about an object’s location. However, the tasks varied in the self-perspective inhibition demands. In the task with the lowest self-perspective inhibition demands, at the time the participant had to infer the character’s false belief, he or she had no idea what the new object’s location was. In contrast, in the task with the highest self-perspective inhibition demands, at the time the participant had to infer the character’s false belief, he or she knew where the object was actually located (and this knowledge had thus to be inhibited). The two tasks were presented to a stroke patient, WBA, with right prefrontal and temporal damage. WBA performed well in the low-inhibition false belief task but showed striking difficulty in the task placing high self-perspective inhibition demands, showing a selective deficit in inhibiting self-perspective. WBA also made egocentric errors in other social and visual perspective taking tasks, indicating a difficulty with belief attribution extending to the attribution of emotions, desires and visual experiences to other people. The case of WBA, together with the recent report of three patients impaired in belief reasoning even when self-perspective inhibition demands were reduced (Samson et al., 2004), provide the first neuropsychological evidence that (a) the inhibition of one’s own point of view and (b) the ability to infer someone else’ s point of view, rely on distinct neural and functional processes.

Error analyses reveal contrasting deficits in “theory of mind”: neuropsychological evidence from a 3-option false belief task

Perspective taking is a crucial ability that guides our social interactions. In this study, we show how the specific patterns of errors of brain-damaged patients in perspective taking tasks can help us further understand the factors contributing to perspective taking abilities. Previous work (e.g., Samson, Apperly, Chiavarino, & Humphreys, 2004; Samson, Apperly, Kathirgamanathan, & Humphreys, 2005) distinguished two components of perspective taking: the ability to inhibit our own perspective and the ability to infer someone else’s perspective. We assessed these components using a new nonverbal false belief task which provided different response options to detect three types of response strategies that participants might be using: a complete and spared belief reasoning strategy, a reality-based response selection strategy in which participants respond from their own perspective, and a simplified mentalising strategy in which participants avoid responding from their own perspective but rely on inaccurate cues to infer the other person’s belief. One patient, with a self-perspective inhibition deficit, almost always used the reality-based response strategy; in contrast, the other patient, with a deficit in taking other perspectives, tended to use the simplified mentalising strategy without necessarily transposing her own perspective. We discuss the extent to which the pattern of performance of both patients could relate to their executive function deficit and how it can inform us on the cognitive and neural components involved in belief reasoning.

When “happy” means “sad”: neuropsychological evidence for the right prefrontal cortex contribution to executive semantic processing

The contribution of the left inferior prefrontal cortex in semantic processing has been widely investigated in the last decade. Converging evidence from functional imaging studies shows that this region is involved in the “executive” or “controlled” aspects of semantic processing. In this study, we report a single case study of a patient, PW, with damage to the right prefrontal and temporal cortices following stroke. PW showed a problem in executive control of semantic processing, where he could not easily override automatic but irrelevant semantic processing. This case thus shows the necessary role of the right inferior prefrontal cortex in executive semantic processing. Compared to tasks previously used in the literature, our tasks placed higher demands on executive semantic processing. We suggest that the right inferior prefrontal cortex is recruited when the demands on executive semantic processing are particularly high.

Bayesian alignment of continuous molecular shapes using random fields

Statistical methodology is proposed for comparing molecular shapes. In order to account for the continuous nature of molecules, classical shape analysis methods are combined with techniques used for predicting random fields in spatial statistics. Applying a modification of Procrustes analysis, Bayesian inference is carried out using Markov chain Monte Carlo methods for the pairwise alignment of the resulting molecular fields. Superimposing entire fields rather than the configuration matrices of nuclear positions thereby solves the problem that there is usually no clear one--to--one correspondence between the atoms of the two molecules under consideration. Using a similar concept, we also propose an adaptation of the generalised Procrustes analysis algorithm for the simultaneous alignment of multiple molecular fields. The methodology is applied to a dataset of 31 steroid molecules.

Discrete breathers in a two-dimensional hexagonal Fermi-Pasta-Ulam lattice

We consider a two-dimensional Fermi-Pasta-Ulam (FPU) lattice with hexagonal symmetry. Using asymptotic methods based on small amplitude ansatz, at third order we obtain a eduction to a cubic nonlinear Schr{\"o}dinger equation (NLS) for the breather envelope. However, this does not support stable soliton solutions, so we pursue a higher-order analysis yielding a generalised NLS, which includes known stabilising terms. We present numerical results which suggest that long-lived stationary and moving breathers are supported by the lattice. We find breather solutions which move in an arbitrary direction, an ellipticity criterion for the wavenumbers of the carrier wave, symptotic estimates for the breather energy, and a minimum threshold energy below which breathers cannot be found. This energy threshold is maximised for stationary breathers, and becomes vanishingly small near the boundary of the elliptic domain where breathers attain a maximum speed. Several of the results obtained are similar to those obtained for the square FPU lattice (Butt \& Wattis, {\em J Phys A}, {\bf 39}, 4955, (2006)), though we find that the square and hexagonal lattices exhibit different properties in regard to the generation of harmonics, and the isotropy of the generalised NLS equation.