2 resultados para COMB POLYMERS

em Memorial University Research Repository


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Produced water is a by-product of offshore oil and gas production, and is released in large volumes when platforms are actively processing crude oil. Some pollutants are not typically removed by conventional oil/water separation methods and are discharged with produced water. Oil and grease can be found dispersed in produced water in the form of tiny droplets, and polycyclic aromatic hydrocarbons (PAHs) are commonly found dissolved in produced water. Both can have acute and chronic toxic effects in marine environments even at low exposure levels. The analysis of the dissolved and dispersed phases are a priority, but effort is required to meet the necessary detection limits. There are several methods for the analysis of produced water for dispersed oil and dissolved PAHs, all of which have advantages and disadvantages. In this work, EPA Method 1664 and APHA Method 5520 C for the determination of oil and grease will be examined and compared. For the detection of PAHs, EPA Method 525 and PAH MIPs will be compared, and results evaluated. APHA Method 5520 C Partition-Infrared Method is a liquid-liquid extraction procedure with IR determination of oil and grease. For analysis on spiked samples of artificial seawater, extraction efficiency ranged from 85 – 97%. Linearity was achieved in the range of 5 – 500 mg/L. This is a single-wavelength method and is unsuitable for quantification of aromatics and other compounds that lack sp³-hybridized carbon atoms. EPA Method 1664 is the liquid-liquid extraction of oil and grease from water samples followed by gravimetric determination. When distilled water spiked with reference oil was extracted by this procedure, extraction efficiency ranged from 28.4 – 86.2%, and %RSD ranged from 7.68 – 38.0%. EPA Method 525 uses solid phase extraction with analysis by GC-MS, and was performed on distilled water and water from St. John’s Harbour, all spiked with naphthalene, fluorene, phenanthrene, and pyrene. The limits of detection in harbour water were 0.144, 3.82, 0.119, and 0.153 g/L respectively. Linearity was obtained in the range of 0.5-10 g/L, and %RSD ranged from 0.36% (fluorene) to 46% (pyrene). Molecularly imprinted polymers (MIPs) are sorbent materials made selective by polymerizing functional monomers and crosslinkers in the presence of a template molecule, usually the analytes of interest or related compounds. They can adsorb and concentrate PAHs from aqueous environments and are combined with methods of analysis including GC-MS, LC-UV-Vis, and desorption electrospray ionization (DESI)- MS. This work examines MIP-based methods as well as those methods previously mentioned which are currently used by the oil and gas industry and government environmental agencies. MIPs are shown to give results consistent with other methods, and are a low-cost alternative improving ease, throughput, and sensitivity. PAH MIPs were used to determine naphthalene spiked into ASTM artificial seawater, as well as produced water from an offshore oil and gas operation. Linearity was achieved in the range studied (0.5 – 5 mg/L) for both matrices, with R² = 0.936 for seawater and R² = 0.819 for produced water. The %RSD for seawater ranged from 6.58 – 50.5% and for produced water, from 8.19 – 79.6%.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The three-dimensional reconstructions of Phoebichnus trochoides and Schaubcylindrichnus (Palaeophycus) heberti created as part of this thesis allow us to fully understand and characterize the three-dimensional morphology and palaeobiology of these common taxa. Three-dimensional reconstructions demonstrate that P. trochoides is a large stellate burrow composed of numerous long galleries produced by a deposit feeding organism. This study reports for the first time that the central zone is composed of stacked disk-shaped layers of highly bioturbated sediment, the radial burrows are composed of a sand-rich lining of pelleted annuli surrounding an active sand-rich fill, and the presence of subtle conical features above the radial galleries that are inferred to result from collapse cone feeding. Reconstructions of heberti demonstrate that the thick walled burrows are composed of sand-rich annular rings, are a broad U-shape, and may be either clustered or isolated. Our observations show that the morphology of heberti is inconsistent with the generic diagnosis of Palaeophycus, but is morphologically comparable to Schaubcylindrichnus, and is herein synonymised with Schaubcylindrichnus to create S. heberti comb. nov. The three-dimensional reconstructions have revealed a number of hitherto unknown morphological elements to both taxa which has facilitated new interpretations of the trace-makers behaviour. The data improves the taxonomic understanding of both P. trochoides and S. heberti which require significant taxonomic change and emendation of diagnoses at the species and genus level.