19 resultados para critical force
em Universidade do Minho
Resumo:
Dovetail joints are one of the most cornrnonly used joints during Gothic and Baroque periods. Despite being coristructed in the sarne way during the ages, there is no analyticai solution available to help its analysis and design so required in reconstruction works of existing timber structures. An analytical solution based on the principie of virtual works under different types of loading is presented in this paper as weli as differences in bearing capacity of the joint for chosen types of loading, when different wood species are used. The accuracy of the presented solution is confirrned by data obtained from experimental tests of scaied modeis of a dovetail joint.
Resumo:
The objective of this paper is to propose a simplified analytical approach to predict the flexural behavior of simply supported reinforced-concrete (RC) beams flexurally strengthened with prestressed carbon fiber reinforced polymer (CFRP) reinforcements using either externally bonded reinforcing (EBR) or near surface mounted (NSM) techniques. This design methodology also considers the ultimate flexural capacity of NSM CFRP strengthened beams when concrete cover delamination is the governing failure mode. A moment–curvature (M–χ) relationship formed by three linear branches corresponding to the precracking, postcracking, and postyielding stages is established by considering the four critical M–χ points that characterize the flexural behavior of CFRP strengthened beams. Two additional M–χ points, namely, concrete decompression and steel decompression, are also defined to assess the initial effects of the prestress force applied by the FRP reinforcement. The mid-span deflection of the beams is predicted based on the curvature approach, assuming a linear curvature variation between the critical points along the beam length. The good predictive performance of the analytical model is appraised by simulating the force–deflection response registered in experimental programs composed of RC beams strengthened with prestressed NSM CFRP reinforcements.
Resumo:
The Childhood protection is a subject with high value for the society, but, the Child Abuse cases are difficult to identify. The process from suspicious to accusation is very difficult to achieve. It must configure very strong evidences. Typically, Health Care services deal with these cases from the beginning where there are evidences based on the diagnosis, but they aren’t enough to promote the accusation. Besides that, this subject it’s highly sensitive because there are legal aspects to deal with such as: the patient privacy, paternity issues, medical confidentiality, among others. We propose a Child Abuses critical knowledge monitor system model that addresses this problem. This decision support system is implemented with a multiple scientific domains: to capture of tokens from clinical documents from multiple sources; a topic model approach to identify the topics of the documents; knowledge management through the use of ontologies to support the critical knowledge sensibility concepts and relations such as: symptoms, behaviors, among other evidences in order to match with the topics inferred from the clinical documents and then alert and log when clinical evidences are present. Based on these alerts clinical personnel could analyze the situation and take the appropriate procedures.
Resumo:
Stress/strain sensors constitute a class of devices with a global ever-growing market thanks to their use in many fields of modern life. They are typically constituted by thin metal foils deposited on flexible supports. However, the low inherent resistivity and limited flexibility of their constituents make them inadequate for several applications, such as measuring large movements in robotic systems and biological tissues. As an alternative to the traditional compounds, in the present work we will show the advantages to employ a smart material, polyaniline (PANI), prepared by an innovative environmentally friendly route, for force/strain sensor applications wherein simple processing, environmental friendliness and sensitivity are particularly required.
Resumo:
Over the past four decades the EU cohesion policy’s focus, objectives and content have experienced significant changes as a result of successive reforms aiming at adapting it to a Union in constant evolution. In the early stages, cohesion policy had eminently redistributive goals and it assumed an explicit spatial dimension. In the late nineties, the possibility of an extension towards Eastern European countries and the limited willingness of net contributors to increase funding led to a turning point in cohesion policy. The increased importance of economic growth and job creation in the 2000’s, within the cohesion policy’s context, has led to a misrepresentation of its essence and motivations. Cohesion was losing importance towards competitiveness and regional equity towards national efficiency. Today, cohesion policy is for many EU countries the main mean for mobilising investment in a context of budgetary constraints and credit rationing. In light of the available evidence, it is likely that the overall design and priorities of the current cohesion policy have a limited impact in terms of convergence in many EU regions, especially in the less developed regions. This paper’s main objectives are to analyse the evolution of European cohesion policy throughout its history, to present a picture of cohesion policy in the 2014-2020 programming period and to discuss the main problems associated with its design, priorities and programming model.
Resumo:
We perform Monte-Carlo simulations of the three-dimensional Ising model at the critical temperature and zero magnetic field. We simulate the system in a ball with free boundary conditions on the two dimensional spherical boundary. Our results for one and two point functions in this geometry are consistent with the predictions from the conjectured conformal symmetry of the critical Ising model.
Resumo:
OBJECTIVE The aim of this study was to compare the performance of the current conventional Pap smear with liquid-based cytology (LBC) preparations. STUDY DESIGN Women routinely undergoing their cytopathological and histopathological examinations at Fundação Oncocentro de São Paulo (FOSP) were recruited for LBC. Conventional smears were analyzed from women from other areas of the State of São Paulo with similar sociodemographic characteristics. RESULTS A total of 218,594 cases were analyzed, consisting of 206,999 conventional smears and 11,595 LBC. Among the conventional smears, 3.0% were of unsatisfactory preparation; conversely, unsatisfactory LBC preparations accounted for 0.3%. The ASC-H (atypical squamous cells - cannot exclude high-grade squamous intraepithelial lesion) frequency did not demonstrate any differences between the two methods. In contrast, the incidence of ASC-US (atypical squamous cells of undetermined significance) was almost twice as frequent between LBC and conventional smears, at 2.9 versus 1.6%, respectively. An equal percentage of high-grade squamous intraepithelial lesions were observed for the two methods, but not for low-grade squamous intraepithelial lesions, which were more significantly observed in LBC preparations than in conventional smears (2.2 vs. 0.7%). The index of positivity was importantly enhanced from 3.0% (conventional smears) to 5.7% (LBC). CONCLUSIONS LBC performed better than conventional smears, and we are truly confident that LBC can improve public health strategies aimed at reducing cervical lesions through prevention programs.
Resumo:
"Series title: Springerbriefs in applied sciences and technology, ISSN 2191-530X"
Resumo:
The links between gender, sex and sexuality and their relevance are theoretically and politically problematic (Richardson, 2007). One of the difficulties in understanding their interconnections is that these terms are often used differently and ambiguously by different authors (and even by the same authors). This article reports the results of an analysis of the articles published in open access communication journals with known impact factor, edited in Portugal and published between 2005 and 2012. The diverse conceptualisations of those three basic concepts and of their (inter)relationships within communication research are identified. The complexity and the intricate (and often implicit) nature of both the meanings of these categories and their relationships underlie and justify our attention and further research. What the findings suggest about the current communication research into gender issues published in the two journals surveyed is that the ‘Gender differences discourse’ (Sunderland, 2004) is the most pervasive discourse (also) in academic practice. Additionally, they show that gender and sex are mainly taken for a fact, not a question that is worth being studied. The editors of these journals, as well as the scholars submitting manuscripts, need to be more aware of the traditional nature of the theoretical and methodological choices that they make regarding gender- and sex-related issues, as well as of the relative lack of attention to sexuality as a research subject.
Resumo:
The evolution of the construction caused a need to use more effective equipments, capable of meeting the increasingly demanding deadlines for the completion of works. In this context, the safety and efficiency of equipment have become key aspects in order to optimize the execution time of the works, as well as reducing labor costs and loss of materials. With the evolution of construction and construction processes, cranes have come to represent a signal of the construction of buildings, revealing to be, in most of the cases, the main equipment of construction sites. Currently, some engineers revels some apprehension regarding the use and handling of cranes which is natural and acceptable, since an equipment failure can lead to serious or fatal accidents. The factors affecting safety management of the cranes in construction sites were investigated, identified, classified and evaluated according to their degree of importance, through interviews with representatives of the general contractors of a set of selected construction sites.
Resumo:
The analysis of journalistic discourse and its social embeddedness has known significant advances in the last two decades, especially due to the emergence and development of Critical Discourse Analysis. However, three important aspects remain under-researched: the time plane in discourse analysis, the discursive strategies of social actors, and the extra- and supra-textual effects of mediated discourse. Firstly, understanding the biography of public matters requires a longitudinal examination of mediated texts and their social contexts but most forms of analysis of journalistic discourse do not account for the time sequence of texts and its implications. Secondly, as the media representation of social issues is, to a large extent, a function of the discursive construction of events, problems and positions by social actors, the discursive strategies that they employ in a variety of arenas and channels ‘‘before’’ and ‘‘after’’ journalistic texts need to be examined. Thirdly, the fact that many of the modes of operation of discourse are extra- or supra-textual calls for a consideration of various social processes ‘‘outside’’ the text. This paper aims to produce a theoretical and methodological contribution to the integration of these issues in discourse analysis by proposing a framework that combines a textual dimension with a contextual one
Resumo:
Under the framework of constraint based modeling, genome-scale metabolic models (GSMMs) have been used for several tasks, such as metabolic engineering and phenotype prediction. More recently, their application in health related research has spanned drug discovery, biomarker identification and host-pathogen interactions, targeting diseases such as cancer, Alzheimer, obesity or diabetes. In the last years, the development of novel techniques for genome sequencing and other high-throughput methods, together with advances in Bioinformatics, allowed the reconstruction of GSMMs for human cells. Considering the diversity of cell types and tissues present in the human body, it is imperative to develop tissue-specific metabolic models. Methods to automatically generate these models, based on generic human metabolic models and a plethora of omics data, have been proposed. However, their results have not yet been adequately and critically evaluated and compared. This work presents a survey of the most important tissue or cell type specific metabolic model reconstruction methods, which use literature, transcriptomics, proteomics and metabolomics data, together with a global template model. As a case study, we analyzed the consistency between several omics data sources and reconstructed distinct metabolic models of hepatocytes using different methods and data sources as inputs. The results show that omics data sources have a poor overlapping and, in some cases, are even contradictory. Additionally, the hepatocyte metabolic models generated are in many cases not able to perform metabolic functions known to be present in the liver tissue. We conclude that reliable methods for a priori omics data integration are required to support the reconstruction of complex models of human cells.
Resumo:
"Series: Solid mechanics and its applications, vol. 226"
Resumo:
"Series: Solid mechanics and its applications, vol. 226"
Resumo:
"Series: Solid mechanics and its applications, vol. 226"