Estudo da partição de fitase produzida por Aspergillus niger var. phoenicis utilizando bioconversão extrativa em sistemas de duas fases aquosas PEG/citrato

Existem diversos métodos tradicionais que são utilizados para extratir biomoléculas produzidas por fermentação convencional. Um método alternativo é o sistema de duas fases aquosas, o qual foi desenvolvido para a extração de bioprodutos. A bioconversão extrativa trata-se de um sistema de duas fases aquosas que integra cultivo microbiológico à produção e recuperação do bioproduto. Fitases são fosfatases específicas que estão envolvidas na catálise do ácido fitico. O objetivo deste trabalho foi estudar a partição da fitase produzida por A. niger var. phoenicis por bioconversão extrativa utilizando PEG/citrato. Realizou-se um planejamento fatorial completo 25, estudando as seguintes variáveis: massa molar do PEG, concentração do PEG, concentração de citrato, pH e agitação, onde obteve-se como variável-resposta o coeficiente de partição em atividade (KATIV). Neste trabalho conseguiu-se um coeficiente de partição de 25,77 utilizando MPEG (8000 g/mol), CPEG, (26,0% m/m), CCIT (20,0% m/m), pH (6,0) e agitação (100 rpm). Através dos resultados obtivos, pode-se concluir que a fitase utilizada no presente estudo apresenta uma tendência de particionar para a fase superior do sistema (K>1). A técnica de fermentação extrativa utilizando SDFA PEG/citrato demonstrou ser promissora para extração de fitase produzida por A. niger var. phoenicis, podendo ser aplicada na composição de rações comerciais.

A novel approach for honey pollen profile assessment using an electronic tongue and chemometric tools

Nowadays the main honey producing countries require accurate labeling of honey before commercialization, including floral classification. Traditionally, this classification is made by melissopalynology analysis, an accurate but time-consuming task requiring laborious sample pre-treatment and high-skilled technicians. In this work the potential use of a potentiometric electronic tongue for pollinic assessment is evaluated, using monofloral and polyfloral honeys. The results showed that after splitting honeys according to color (white, amber and dark), the novel methodology enabled quantifying the relative percentage of the main pollens (Castanea sp., Echium sp., Erica sp., Eucaliptus sp., Lavandula sp., Prunus sp., Rubus sp. and Trifolium sp.). Multiple linear regression models were established for each type of pollen, based on the best sensors sub-sets selected using the simulated annealing algorithm. To minimize the overfitting risk, a repeated K-fold cross-validation procedure was implemented, ensuring that at least 10-20% of the honeys were used for internal validation. With this approach, a minimum average determination coefficient of 0.91 ± 0.15 was obtained. Also, the proposed technique enabled the correct classification of 92% and 100% of monofloral and polyfloral honeys, respectively. The quite satisfactory performance of the novel procedure for quantifying the relative pollen frequency may envisage its applicability for honey labeling and geographical origin identification. Nevertheless, this approach is not a full alternative to the traditional melissopalynologic analysis; it may be seen as a practical complementary tool for preliminary honey floral classification, leaving only problematic cases for pollinic evaluation.

Práticas centradas na família: identificação de comportamentos para uma prática de qualidade nos distritos de Braga, Viana do Castelo e Vila Real

Dissertação de mestrado em Educação Especial (área de especialização em Intervenção Precoce)

Contribuição da susceptibilidade genética e do contexto ambiental na representação da vinculação em crianças em idade pré-escolar

Dissertação de mestrado integrado em Psicologia

Triagem universal de alunos em risco de apresentarem dificuldades de aprendizagem específicas na leitura: um estudo quantitativo no 3º ano do 1º Ciclo do Ensino Básico

Doutoramento em Estudos da Criança (área de especialização em Educação Especial).

Advances in microbial diagnosis: using mass spectrometry for proteomics and genomics applications

Since the last two decades mass spectrometry (MS) has been applied to analyse the chemical cellular components of microorganisms, providing rapid and discriminatory proteomic profiles for their species identification and, in some cases, subtyping. The application of MS for the microbial diagnosis is currently well-established. The remarkable reproducibility and objectivity of this method is based on the measurement of constantly expressed and highly abundant proteins, mainly important conservative ribosomal proteins, which are used as markers to generate a cellular fingerprint. Mass spectrometry based on matrix-assisted laser desorption ionization-time of flight (MALDI- TOF) technique has been an important tool for the microbial diagnostic. However, some technical limitation concerning both MALDI-TOF and its used protocols for sample preparation have fostered the research of new mass spectrometry systems (e.g. LC MS/MS). LC MS/MS is able to generate online mass spectra of specific ions with further online sequencing of these ions, which include both specific proteins and DNA fragments. In this work a set of data for yeasts and filamentous fungi diagnostic obtained through an international collaboration project involving partners from Argentina, Brazil, Chile and Portugal will be presented and discussed.

Assessment of a protease inhibitor peptide for anti-ageing

Ageing and skin exposure to UV radiation induces production and activation of matrix metalloproteinases (MMPs) and human neutrophil elastase (HNE). These enzymes are known to break down the extracellular matrix (ECM) which leads to wrinkle formation. Here, we demonstrated the potential of a solid-in-oil nanodispersion containing a competitive inhibitor peptide of HNE mixed with hyaluronic acid (HA), displaying 158 nm of mean diameter, to protect the skin against the ageing effects. Western blot analysis demonstrated that activation of MMP-1 in fibroblasts by HNE treatment is inhibited by the solid-in-oil nanodispersion containing the peptide and HA. The results clearly demonstrate that solid-in-oil nanodispersion containing the HNE inhibitor peptide is a promising strategy for anti-ageing effects. This effect can be seen particularly by ECM regulation by affecting fibroblasts. The formulation also enhances the formation of thicker bundles of actin filaments.

Magnetoelectric CoFe2O4/polyvinylidene fluoride electrospun nanofibres

Magnetoelectric 0-1 composites comprising CoFe2O4 (CFO) nanoparticles in polyvinylidene fluoride (PVDF) polymerfibre matrix have been prepared by electrospinning. The average diameter of the electrospun composite fibres D is ~ 325 nm, independently of nanoparticle content, and the amount of crystalline polar β phase is strongly enhanced when compared to pure PVDF polymer fibres. The piezoelectric response of these electroactive nanofibres is modified by an applied magnetic field, thus evidencing the magnetoelectric character of the CFO/PVDF 0-1 composites.

Photolabile protection for amino acids: studies on the release from novel benzoquinolone cages

The synthesis of a novel fused nitrogen heterocycle, benzoquinolone, for evaluation as a photocleavable protecting group is described for the first time, by coupling to model amino acids (alanine, phenylalanine and glutamic acid). Conversion of the phenylalanine ester conjugate to the thionated derivative was accomplished by reaction with Lawesson’s reagent. Photocleavage studies of the carbonyl and thiocarbonyl benzoquinolone conjugates in various solvents and at different wavelengths (300, 350 and 419 nm) showed that the most interesting result was obtained at 419 nm for the thioconjugate, revealing that the presence of the thiocarbonyl group clearly improved the photolysis rates, giving practicable irradiations times for the release of the amino acids (less than 1 minute).

Aminobenzocoumarinylmehtyl esters as photoactive precursors for the release of butyric acid

The evaluation of the photorelease of a carboxylic acid drug, using butyric acid as a representative model, was carried out by using 7-amino-4-chloromethyl-2-oxo-2Hnaphtho[1,2-b] pyran, an aminobenzocoumarin, and its mono- and di-methylated or ethylated derivatives. This study was intended to improve the release of butyric acid from benzocoumarins by the addition of an amino group to the heterocycle by applying the knowledge of second-generation coumarinylmethyl-based photoremovable protecting groups. Photolysis studies were performed on the resultant ester cages by irradiation in a photochemical reactor at 254, 300, 350 and 419 nm, using methanol/HEPES buffer 80:20 solutions as solvent. The data obtained showed that these new fluorescent aminobenzocoumarins are superior to all the previously tested benzocoumarins with the same or different ring fusions. As well as the photolysis, the photophysics of the compounds were characterised by both steady state and time-resolved methods.

Soluções otimizadas de reabilitação de edifícios residenciais para atingir os nZEB

A produção e consumo dos vários tipos de energia são dos grandes responsáveis pelas emissões de gases com efeito de estufa que contribuem para as alterações climáticas. No sentido de reduzir as emissões tendo em vista a mitigação das alterações climáticas, o setor dos edifícios, enquanto um dos grandes consumidores de energia, é um alvo de intervenção importante no que concerne à redução dos consumos e consequentes emissões de CO2. Neste contexto, nos últimos anos a Comissão Europeia tem vindo a publicar Diretivas com um grau de exig��ncia crescente em relação ao desempenho dos edifícios, de modo a torna-los mais eficientes , ainda que de uma forma que seja rentável no ciclo de vida do edifício. De modo a perceber o potencial de melhoria de desempenho energ��tico dos edifícios do parque habitacional português, analisaram-se alguns edifícios representativos do mesmo, com e sem medidas de melhoria de desempenho energ��tico, avaliando a rentabilidade do investimento ao Soluções otimizadas de reabilitação de edifícios residenciais para atingir os nZEB 104 longo do ciclo de vida do edifício. Os resultados permitem verificar que as medidas que têm maior impacto são a alteração dos sistemas de climatização e preparação de águas quentes sanitárias e a melhoria do desempenho das fachadas e coberturas. O presente documento foca-se especificamente nas componentes opacas das fachadas, apresentando os níveis ótimos de rentabilidade para o seu desempenho energ��tico em operações de reabilitação de edifícios existentes de diferentes épocas e em diversas zonas climáticas, e mostrando como estes elementos podem contribuir para a obtenção de edifícios de energia quase-zero.

Custo ótimo de ciclo de vida na requalificação urbana da urbanização de Vila d’Este

A urbanização de Vila d’Este é uma das mais importantes urbanizações de “habitação de custos controlados” em Portugal, com um total de 109 edifícios, alojando cerca de 17 mil habitantes. Tendo por base o processo de reabilitação em curso, é realizada uma análise de custos de ciclo de vida. O objetivo é identificar os níveis ótimos de rentabilidade dos requisitos energ��ticos aplicáveis na reabilitação dos edifícios e em cada um dos seus componentes com relevância no desempenho energ��tico, bem como identificar os níveis de desempenho energ��tico compatíveis com o conceito de edifícios de necessidades quase nulas de energia. Os resultados desta avaliação serão de utilidade relevante para o desenvolvimento do plano nacional para a reabilitação do parque edificado existente como previsto na Diretiva Europeia para o Desempenho Energ��tico dos Edifícios de 2010.

Cost optimal strategies for the renovation of residential neighbourhoods towards energy and emissions neutrality – Rainha Dona Leonor case study

Buildings are one of the major consumers of energy in Europe. This makes them an important target when aiming to reduce the energy consumptions and carbon emissions. The majority of the European building stock has already some decades and so it needs renovation in order to keep its functionality. Taking advantage of these interventions, the energy performance of the buildings may also be improved. In Portugal the renovation techniques, both regarding energy efficiency measures as well as measures for the use of renewable energy sources, are normally planned at the building scale. It is important to explore the possibility of having large scale interventions, has it has been done in other countries, namely at neighbourhood scale with district energy system in order to optimize the results in terms of costs and environmental impact.

Improving buildings energy performance: comparison between simple payback period and life cycle costs analysis

The building sector is one of the Europeâ s main energy consumer, making buildings an important target for a wiser energy use, improving indoor comfort conditions and reducing the energy consumption. To achieve the European Union targets for energy consumption and carbon reductions it is crucial to act in new, but also in existing buildings, which constitute the majority of the building stock. In existing buildings, the significant improvement of their efficiency requires important investments. Therefore, costs are a major concern in the decision making process and the analysis of the cost effectiveness of the interventions is an important path in the guidance for the selection of the different renovation scenarios. The Portuguese thermal legislation considers the simple payback method for the calculations of the time for the return of the investment. However, this method does not take into consideration inflation, cash flows and cost of capital, as well as the future costs of energy and the building elements lifetime as it happens in a life cycle cost analysis. In order to understand the impact of the economic analysis method used in the choice of the renovation measures, a case study has been analysed using simple payback calculations and life cycle costs analysis. Overall results show that less far-reaching renovation measures are indicated when using the simple payback calculations which may be leading to solutions less cost-effective in a long run perspective.

Cost-effective energy and carbon emission optimization in building renovation – A case-study in a low income neighbourhood

Construction sector is one of the major responsible for energy consumption and carbon emissions and renovation of existing buildings plays an important role in the actions to mitigate climate changes. Present work is based on the methodology developed in IEA Annex 56, allowing identifying cost optimal and cost effective renovation scenarios improving the energy performance. The analysed case study is a residential neighbourhood of the municipality of Gaia in Portugal. The analysis compares a reference renovation scenario (without improving the energy performance of the building) with a series of alternative renovation scenarios, including the one that is being implemented.