Proceedings of CMS WORKSHOP: Cracking of massive concrete structures

978-2-35158-155-1

Presentations eBook: according to 1st Workshop with focus on experimental testing of cement-based materials

COST TU 1404

Research posters’ eBook: according to 1st WORKSHOP with “Focus on experimental testing of cement based materials”

COST Action TU 1404

Institutional posters’ eBook: according to 1st Workshop with “Focus on experimental testing of cement based materials”

COST TU 1404

WOS 8th international conference - Book of Abstracts

Proceedings book of the WOS 8th international conference - Book of Abstracts Edited by WOS2015 - University of Minho Includes biographical references and index.

Influence of ageing on the properties of bitumen from asphalt mixtures with recycled concrete aggregates

The reuse of recycled concrete aggregates in new hot-mix asphalt can be a more sustainable method of production, but these mixtures may need a heat treatment before compaction to improve their water sensitivity performance. A direct consequence of this treatment is an increase in the hot-mix asphalt resilient modulus. The aim of this paper is to analyse the effect of ageing on the stiffness of asphalt mixtures with different amounts of recycled concrete aggregates, before and after a heat treatment, which was analysed through the assessment of its bitumen properties. Moreover, this paper also aims to analyse whether the rolling thin-film oven test is able to simulate the ageing effect of the heat treatment. In the laboratory work, a paving grade bitumen B50/70 has been used to produce asphalt mixtures with 0% and 30% recycled concrete aggregates, and the bitumen was later characterised (using penetration, softening point, dynamic viscosity and dynamic shear rheometer tests) in various situations, such as when using virgin bitumen, short-term aged bitumen, aged bitumen after heat treatment (simulated with 4 h of rolling thin-film oven test) and bitumen samples recovered from asphalt mixtures with different production mixes (0% and 30% recycled concrete aggregate) and heat treatment conditions (0 and 4 h of curing time in the oven). Based on the results obtained, it could be concluded that the ageing resulting from the heat treatment is the primary cause of the hot-mix asphalt's increased stiffness, while recycled concrete aggregate content has a small influence. Moreover, it could be concluded that when there is no curing time, the recycled concrete aggregate protects the bitumen against ageing. Additionally, it could be stated that the rolling thin-film test is able to adequately simulate the ageing effect of the heat treatment. Thus, this test is useful for determining the ageing suffered by the bitumen when the recycled concrete aggregate mixture is manufactured using a heat treatment.

Safety classification using GIS in decision-making process to define priority road interventions

Given the current economic situation of the Portuguese municipalities, it is necessary to identify the priority investments in order to achieve a more efficient financial management. The classification of the road network of the municipality according to the occurrence of traffic accidents is fundamental to set priorities for road interventions. This paper presents a model for road network classification based on traffic accidents integrated in a geographic information system. Its practical application was developed through a case study in the municipality of Barcelos. An equation was defined to obtain a road safety index through the combination of the following indicators: severity, property damage only and accident costs. In addition to the road network classification, the application of the model allows to analyze the spatial coverage of accidents in order to determine the centrality and dispersion of the locations with the highest incidence of road accidents. This analysis can be further refined according to the nature of the accidents namely in collision, runoff and pedestrian crashes.

Tempos sociais e o mundo contemporâneo: as crises, as fases e as ruturas

(Excerto) O presente ebook compõe-se do conjunto de comunicações apresentadas no seminário “Tempos Sociais e o mundo contemporâneo – fases, crises e ruturas”, realizado em novembro de 2013, na Universidade do Minho. Os textos que se apresentam vertem as influências disciplinares dos diversos autores, apresentando pontos de vista específicos sobre diversos fenómenos analisados, na perspetiva do tempo e das temporalidades. Michelle Bastian afirma que o tempo não é um recipiente neutro para a vida social, mas uma fonte de valores, conceitos e lógicas que são usados para negociar a complexidade da vida social. Com efeito, as sociedades atuais são marcadas por vários processos de transformação que implicam alterações significativas na forma de perceber e de usar o tempo. Algumas das palavras mais frequentes usadas na classificação do estado do social e do político são crise, fase e rutura. Trata-se de palavras aplicadas aos mais diversos níveis. Porque são socialmente constituídas, traduzem os modos pelos quais a sociedade se pensa e analisa a si própria. É nesse sentido que merecem ser estudadas. Qualquer uma destas palavras contém a ideia de corte num determinado processo temporal com caraterísticas próprias e qualquer uma delas contem, em potência, a sua superação. Tem primeiramente, um papel substantivo na forma como permitem uma certa leitura da sociedade atual. Um número crescente de autores tem vindo a dar atenção ao surgimento de novas experiências e expressões de tempo que consideram ser um resultado de tendências contemporâneas que caracterizam a expansão da sociedade em rede, da digitalização, das novas formas de interação e mediatização individual e institucional, assim como da aceleração (Hassan, 2010; Hope, 2009; Rosa, 2005; Scheuerman, 2004). Ideias tais como o fim do futuro, recessão, desigualdades temporais, surgimento de identidades em fluxo, e, ainda, as novas percepções sobre o passado, o presente e o futuro são exemplos das temáticas em discussão.

Embedded Through-Section shear strengthening technique using steel and CFRP bars in RC beams of different percentage of existing stirrups

The Embedded Through-Section (ETS) technique is a promising technique for the shear strengthening of existing (RC) elements. According to this technique, holes are drilled through the beam section, and bars of steel or FRP material are introduced into these holes and bonded to the concrete with adhesive materials. An experimental program was carried out with RC T-cross section beams strengthened in shear using the ETS steel bars and ETS CFRP rods. The research is focused on the evaluation of the ETS efficiency on beams with different percentage of existing internal transverse reinforcement (ρsw=0.0%, ρsw=0.1% and ρsw=0.17%). The effectiveness of different ETS strengthening configurations was also investigated. The good bond between the strengthening ETS bars and the surrounding concrete allowed the yield initiation of the ETS steel bars and the attainment of high tensile strains in the ETS CFPR rods, leading to significant increase of shear capacity, whose level was strongly influenced by the inclination of the ETS bars and the percentage of internal transverse reinforcement.

Life cycle analysis of zero waste management for Jonggol green city

A Zero waste management is believed to be one of methods to gain sustainability in urban areas. Take advantages of resources as enough as the needs and process it until the last part to be wasted is a contribution to take care the environment for the next generation. Reduce, reuse, and recycle are three simplesactivities which are until nowadays consideredas the back bone of zero waste. Jonggolgreen city is a new urban area in Indonesia with a 100 ha of surface area zoned as education tourism area. It is an independent area with pure natural resources of water, air, and land to be managed and protected. It is planned as green city through zero waste management since2013. In this preliminary period, a monitoring tool is being prepared by applying a Life Cycle Analysis (LCA) for urban areas [1]. This paper will present an explanatory assessment ofthe zero waste management for Jonggolgreen city. The existing situation will be examined through LCA and afterwards,the new program and the proposed green design to gain the next level of zero waste will be discussed. The purpose is to track the persistence of the commitment and the perception of the necessary innovationsin order to achieve the ideal behavior level of LCA.

Literacia, media e cidadania - Livro de atas do 3.º Congresso

(Excerto) A terceira edição do Congresso sobre Literacia, Media e Cidadania (LMC) teve lugar nos dias 17 e 18 de abril de 2015, em Lisboa, no Pavilhão do Conhecimento. Organizado pelo GILM – Grupo Informal sobre Literacia para os Media, o evento, que contou com a participação de cerca de 250 profissionais, teve como eixo central a temática “Literacia Mediática e Leituras Críticas do Mundo”. Durante dois dias de trabalho, procurou-se pro-mover uma reflexão crítica sobre a atualidade e o mundo, e o modo como os media a representam, com o objetivo de aprender a olhar e a ler criticamente os ecrãs e as mensagens e textos que produzem, o modo como os cidadãos os usam, como se apropriam deles e como produzem e partilham informação. Estes e outros tópicos relacionados foram apresentados e debatidos em 4 sessões plenárias, 16 sessões de comunicações livres e 4 workshops, acompanhados de uma mostra de projetos, produtos e serviços patentes no átrio do Pavilhão.

Structural, mechanical and piezoelectric properties of polycrystalline AlN films sputtered on titanium bottom electrodes

Polycrystalline AlN coatings deposited on Ti-electrodes films were sputtered by using nitrogen both as reactive gas and sputtering gas, in order to obtain high purity coatings with appropriate properties to be further integrated into wear resistance coatings as a piezoelectric monitoring wear sensor. The chemical composition, the structure and the morphology of the films were investigated by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy and atomic force microscopy techniques. These measurements show the formation of highly (101), (102) and (103) oriented AlN films with good piezoelectric and mechanical properties suitable for applications in electronic devices. Through the use of lower nitrogen flow a densification of the AlN coating occurs in the microstructure, with an improvement of the crystallinity along with the increase of the hardness. Thermal stability of aluminum nitride coatings at high temperature was also examined. It was found an improvement of the piezoelectric properties of the highly (10x) oriented AlN films which became c-axis (002) oriented after annealing. The mechanical behavior after heat treatment shows an important enhancement of the surface hardness and Young’s modulus, which decrease rapidly with the increase of the indentation depth until approach constant values close to the substrate properties after annealing. Thus, thermal annealing energy promotes not only the rearrangement of Al–N network, but also the occurrence of a nitriding process of unsaturated Al atoms which cause a surface hardening of the film.

Perspectivas sobre info-exclusão no ciberespaço lusófono

Os países de língua oficial portuguesa revelam, no seu conjunto, uma heterogeneidade económica, social, educativa e geográfica que afecta o modo como se efectiva o acesso à internet e à escolarização nestes países. Nesta comunicação, pretende-se reflectir sobre duas questões centrais que se colocam quando se discute o conceito de infoexclusão. Por um lado, questiona-se se estarão criadas as condições culturais, infraestruturais e sociais que permitam o acesso e a utilização informada dos serviços de internet nestes países; por outro lado, interroga-se sobre a existência, nos países da Comunidade dos Países de Língua Portuguesa (CPLP), de condições materiais e culturais que lhes permita desfrutar das potencialidades do mundo digital. Pretende-se apresentar, neste trabalho, alguns dados relativos aos índices de desenvolvimento humano nestes países, aos níveis de escolaridade e de literacia, reflectindo sobre os mesmos, apresentando também os dados disponíveis respeitantes ao número de utilizadores e subscritores dos serviços de internet. Os dados analisados indicam que existem grandes assimetrias no que diz respeito ao nível de desenvolvimento humano nestes países. Observam-se profundas desigualdades ligadas à pobreza e à educação, que contribuem de modo significativo para a presença de baixos níveis de desenvolvimento humano em alguns países da CPLP.

COST Action TU1406: eBook of the 1st Workshop Meeting

COST Action TU1406 aims to address the European economic and societal needs by standardizing the condition assessment and maintenance level of roadway bridges. Currently, bridge quality control plans vary from country to country and, in some cases, within the same country. This therefore urges the establishment of a European guideline to surpass the lack of a standard methodology to assess bridge condition and to define quality control plans for roadway bridges. Such a guideline will comprise specific recommendations for assessing performance indicators as well as for the definition of performance goals, bringing together different stakeholders (e.g. universities, institutes, operators, consultants and owners) from various scientific disciplines (e.g. on-site testing, visual inspection, structural engineering, sustainability, etc.) in order to establish a common transnational language. COST Action TU1406 Workshops aim to facilitate the exchange of ideas and experiences between active researchers and practitioners as well as to stimulate discussions on new and emerging issues in line with the conference topics. This first Workshop essentially focuses on WG1 issues, namely, intends to address performance indicators, how these are assessed (e.g. visual inspection, nondestructive tests and monitoring systems), with what frequency and what values are generally obtained. The main outcomes, given in this eBook, were really important, not only for WG1 developments, but also for all the other WGs and for the Action itself.