Companies' OHS internal structures: Types and theoretical foundations

An organization manages to regulate, standardize and optimize its operations in a way that places health and safety first by considering Health, Safety, Environment and Ergonomics (HSEE). In order to provide a theoretical foundation for Companies’ Occupational Health and Safety Internal Structures (COHSIS) allowing the focus on safety, COHSIS and its fundamentals were reviewed and described based on a brief literature review, which have included both papers published in journals, as well as works made available by selected organizations with mature safety culture. Three COHSIS were defined for description of its fundamentals, enabling improve the usability of its terminologies and provide the mentioned theoretical foundation.

Concepções e práticas do trabalho da equipe multidisciplinar diante das crianças com necessidades educacionais especiais

Dissertação de mestrado em Educação Especial (área de especialização em Dificuldades de Aprendizagem Específicas)

Tube-jack and sonic testing for the evaluation of the state of stress in historical masonry

In the investigation and diagnosis of damages to historical masonry structures, the state of stress of the masonry is an important characteristic that must be determined with as much accuracy as possible. Flat-jack testing is a traditional method used to determine the state of stress in historical masonry structures. However, when irregular masonry is tested the method can cause damage to the masonry units and the accuracy of the method is reduced. An enhanced technique, called tube-jack testing, is being developed at the University of Minho to reduce the damage caused during testing and improve the accuracy when used on irregular masonry. This method uses multiple cylindrical jacks inserted in a line of holes drilled in the mortar joints of the masonry, avoiding damage to the masonry units. Concurrently with the development of tube-jack testing, the effect of stress state on sonic testing is being studied. Sonic testing is often used to determine locations of voids and damage in masonry. The focus of these studies was to determine if the state of stress is influencing the sonic test results. In this paper the results of tube-jack testing and sonic testing on masonry walls, built for the purpose of this study in the laboratory, loaded in compression is presented. The tube-jack testing is used to estimate the state of stress in the masonry and the sonic test results are evaluated based on the effect of the applied load on the wall. Future testing and study are suggested for continued development of these test methods.

Embedded Through-Section shear strengthening technique using steel and CFRP bars in RC beams of different percentage of existing stirrups

The Embedded Through-Section (ETS) technique is a promising technique for the shear strengthening of existing (RC) elements. According to this technique, holes are drilled through the beam section, and bars of steel or FRP material are introduced into these holes and bonded to the concrete with adhesive materials. An experimental program was carried out with RC T-cross section beams strengthened in shear using the ETS steel bars and ETS CFRP rods. The research is focused on the evaluation of the ETS efficiency on beams with different percentage of existing internal transverse reinforcement (ρsw=0.0%, ρsw=0.1% and ρsw=0.17%). The effectiveness of different ETS strengthening configurations was also investigated. The good bond between the strengthening ETS bars and the surrounding concrete allowed the yield initiation of the ETS steel bars and the attainment of high tensile strains in the ETS CFPR rods, leading to significant increase of shear capacity, whose level was strongly influenced by the inclination of the ETS bars and the percentage of internal transverse reinforcement.

Survey and dynamic behaviour of the Our Lady of Conception Church, Portugal

The Our Lady of Conception church is located in village of Monforte (Portugal) and is not in use nowadays. The church presents structural damage and, consequently, a study was carried out. The study involved the survey of the damage, dynamic identification tests under ambient vibration and the numerical analysis. The church is constituted by the central nave, the chancel, the sacristy and the corridor to access the pulpit. The masonry walls present different thickness, namely 0.65 m in the chancel, 0.70 m in the sacristy, 0.92 in the central nave and 0.65 m in the corridor. The masonry walls present 8 buttresses with different dimensions. The total longitudinal and transversal dimensions of the church are equal to 21.10 m and 14.26 m, respectively. The survey of the damage showed that, in general, the masonry walls are in good conditions, with exception of the transversal walls of the nave, which present severe cracks. The arches of the vault presents also severe cracks along the central nave. As consequence, the infiltrations have increased the degradation of the vault and paintings. Furthermore, the foundations present settlements in the Southwest direction. The dynamic identification test were carried out under the action of ambient excitation of the wind and using 12 piezoelectric accelerometers of high sensitivity. The dynamic identification tests allowed to estimate the dynamic properties of the church, namely frequencies, mode shapes and damping ratios. A FEM numerical model was prepared and calibrated, based on the first four experimental modes estimated in the dynamic identification tests. The average error between the experimental and numerical frequencies of the first four modes is equal to 5%. After calibration of the numerical model, pushover analyses with a load pattern proportional to the mass, in the transversal and longitudinal direction of the church, were performed. The results of the analysis numerical allow to conclude that the most vulnerable direction of the church is in the transversal one and the maximum load factor is equal to 0.35.

Ciências e experiências em contexto de educação pré-escolar

Relatório de estágio de mestrado em Educação Pré-Escolar e Ensino do 1ºCiclo do Ensino Básico

José Anastácio da Cunha e o projeto MAT² : no trilho de uma história extraordinária

A ideia de que as Matemáticas de Portugal (e de Espanha) atravessaram, depois de um período áureo nos Descobrimentos, um longo deserto onde não foi possível florescerem Mestres, nem escolas, nem cultura científica, nem investigação de relevo foi, durante muito tempo, reiteradamente veiculada, inclusivé através de alguns dos nossos mais referenciados historiadores da Matemática, como é o caso de Gomes Teixeira ou de Rey Pastor. Mas a verdade é que o estudo da História das Matemáticas em Portugal tem, na última década, vivido um interesse crescente onde sobressaem, em particular, uma leitura menos enviesada sobre, por exemplo, o papel educativo dos Jesuítas ou a publicação das obras completas de Pedro Nunes. Está-se assim a contribuir para uma compreensão mais completa da História geral de Portugal, de que a História da Ciência e da Cultura faz parte. José Anastácio da Cunha (1744-1787) foi figura de proa no século XVIII português. Sabíamo-lo matemático que, sem nunca ter saído de Portugal, havia sido capaz de antecipar, em mais de 50 anos, os esforços de matemáticos franceses e alemães para fundar a Matemática com rigor. Sabíamo-lo também autor de uma vasta e diversificada obra de inegável importância matemática mas, igualmente, autor de textos poéticos. Agora, com o projecto que denominámos de MAT2, centramo-nos em José Anastácio da Cunha e pretendemos, se possível, ir ainda mais além. Partimos de uma descoberta, árdua mas com final feliz, em um Arquivo de família: o da Casa de Mateus. Sentimo-nos, com esta “sorte”, privilegiados e gratos por nos ter sido gentilmente concedido o acesso a um vasto conjunto de documentos únicos (diários de viagens, notas de aulas e correspondência) que incluem memórias autógrafas e inéditas de Anastácio da Cunha. Organizámo-nos, cientes do trabalho árduo que temos pela frente, multi e interdisciplinarmente englobando a Matemática (nas suas múltiplas especializações) e a História (incluindo a da Matemática) mas também contando com a Física, a Informática, os estudos militares ou a Arquivística e as Humanidades; reunimos académicos, mais e menos veteranos, com investigadores jovens e juntámos valências nacionais e estrangeiras. No presente artigo daremos conta do percurso trilhado, até agora, pelo projecto MAT2.

A relational algebra approach to ETL modeling

The MAP-i Doctoral Programme in Informatics, of the Universities of Minho, Aveiro and Porto

Assessing the production of jet mix columns using alkali activated waste based on mechanical and financial performance and CO2 (eq) emissions

Recent research has proved the potential of alkaline activated fly-ash for soil stabilisation. However, such studies have not focused on the link between financial, mechanical and environmental aspects of this solution, but only on their absolute mechanical properties. The present paper characterises the mechanical behaviour of a large spectrum of activator-ash-soil combinations used to build jet mixing columns, analysing also the cost and CO2 (eq) emissions. The concern with these two vectors forced a decrease in the quantity of stabilising agent added to the soil, relatively to previous research, and the effects of such low quantities have not yet been published. However, the results clearly showed a significant improve in strength, still well above the average values expected when improving the stressstrain behaviour of a weak soil. Uniaxial compressive strength tests were used to assess the effects of the fly-ash percentage, the alkalieash ratio and the water content. The carbon calculator recently developed by the European Federation of Foundation Contractors and the Deep Foundations Institute was used to quantify the CO2 (eq) emissions associated with this technique. The financial cost was estimated based on the experience of a major Portuguese contractor. For comparison purposes, soil cement mixtures were also analysed, using similar conditions and tools used for the soil-ash analysis. Results showed that the cement and ash solutions are very similar in terms of overall performance, with some advantage of the former regarding financial cost, and a significant advantage of the latter regarding the CO2 (eq) emissions. This new grout, although it is in an embryonic stage, it has the potential for broader developments in the field.

Modelling integral viscoelastic flows in OpenFOAM

[Excerpt] A large number of constitutive equations were developed for viscoelastic fluids, some empirical and other with strong physical foundations. The currently available macroscopic constitutive equations can be divided in two main types: differential and integral. Some of the constitutive equations, e.g. Maxwell are available both in differential and integral types. However, relevant in tegral models, like K - BKZ, just possesses the integral form. (...)

Construção de um manual de codificação e interpretação de memórias autobiográficas

Dissertação de mestrado integrado em Psicologia

Arquitecturas imaginárias. Espaço real e ilusório no Barroco português

Tese de Doutoramento em Arquitectura / Cultura Arquitectónica.

Educação e ambiguidades da autonomização: para uma pedagogia crítica da promoção do indivíduo autónomo

O presente artigo, confrontando a educação com o desiderato da autonomização, pretende analisar as ambiguidades a que esse confronto dá hoje origem e estabelecer, mediante a explicitação de uma conceção contra-hegemónica de autonomização, as bases e as coordenadas de uma pedagogia crítica da promoção do indivíduo autónomo, que seja simultaneamente humanista, emancipadora e transformadora tanto da realidade do sujeito quanto da realidade do contexto. A estrutura narrativa, em consonância com esse amplo propósito, articula as seguintes dimensões: a educação e a normatividade da autonomização; as ambiguidades da autonomização: sentidos divergentes de fazer educação para a autonomia; e, por fim, o empowerment emancipatório e transformador: vetor da educação enquanto autonomização contra-hegemónica. A conclusão aponta as linhas diretoras da construção de uma pedagogia crítica do indivíduo autónomo, assumida nas vertentes de emancipação individual e transformação social.

Recursos para la alfabetización mediática: investigación y propuestas para niños

Mucho se ha investigado sobre la educación en medios, su importancia y objetivos. Más allá de las Directivas, resoluciones o recomendaciones, la investigación en esta área ha permitido profundizar y solidificar sus fundamentos, al tiempo que ha facilitado el reconocimiento de sus puntos más débiles u omisiones. Uno de los puntos críticos destacados por la formación y por el trabajo de investigación que se ha desarrollado en la Universidad de Miño (Portugal) durante los últimos 20 años, es la inexistencia de recursos y materiales que puedan utilizarse para la promoción de la educación en los medios de comunicación en diferentes contextos. De esta forma, independientemente de los recursos y materiales, se genera la importancia de la transferencia de conocimientos a la práctica, la trascendencia de la mediación del conocimiento producido a su público. Esta preocupación fue la base principal del proyecto titulado «Recursos para la alfabetización mediática» llevado a cabo en el Centro de Estudios de Comunicación y Sociedad y financiado por Evens Foundation (Bélgica). Este trabajo presenta sucintamente los procesos de creación y los resultados generados por estos recursos, centrados en tres medios: televisión, videojuegos e Internet y redes sociales.

Controlo e gestão da produção no setor de corte térmico

Dissertação de mestrado integrado em Engenharia Mecânica