Assessing the production of jet mix columns using alkali activated waste based on mechanical and financial performance and CO2 (eq) emissions

Recent research has proved the potential of alkaline activated fly-ash for soil stabilisation. However, such studies have not focused on the link between financial, mechanical and environmental aspects of this solution, but only on their absolute mechanical properties. The present paper characterises the mechanical behaviour of a large spectrum of activator-ash-soil combinations used to build jet mixing columns, analysing also the cost and CO2 (eq) emissions. The concern with these two vectors forced a decrease in the quantity of stabilising agent added to the soil, relatively to previous research, and the effects of such low quantities have not yet been published. However, the results clearly showed a significant improve in strength, still well above the average values expected when improving the stressstrain behaviour of a weak soil. Uniaxial compressive strength tests were used to assess the effects of the fly-ash percentage, the alkalieash ratio and the water content. The carbon calculator recently developed by the European Federation of Foundation Contractors and the Deep Foundations Institute was used to quantify the CO2 (eq) emissions associated with this technique. The financial cost was estimated based on the experience of a major Portuguese contractor. For comparison purposes, soil cement mixtures were also analysed, using similar conditions and tools used for the soil-ash analysis. Results showed that the cement and ash solutions are very similar in terms of overall performance, with some advantage of the former regarding financial cost, and a significant advantage of the latter regarding the CO2 (eq) emissions. This new grout, although it is in an embryonic stage, it has the potential for broader developments in the field.

Sobrecarga em cuidadores informais de doentes com Alzheimer

Dissertação de mestrado em Psicologia Aplicada

Qualidade de vida nos cuidadores informais de doentes com doença de Alzheimer

Dissertação de mestrado em Psicologia Aplicada

Structural, mechanical and piezoelectric properties of polycrystalline AlN films sputtered on titanium bottom electrodes

Polycrystalline AlN coatings deposited on Ti-electrodes films were sputtered by using nitrogen both as reactive gas and sputtering gas, in order to obtain high purity coatings with appropriate properties to be further integrated into wear resistance coatings as a piezoelectric monitoring wear sensor. The chemical composition, the structure and the morphology of the films were investigated by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy and atomic force microscopy techniques. These measurements show the formation of highly (101), (102) and (103) oriented AlN films with good piezoelectric and mechanical properties suitable for applications in electronic devices. Through the use of lower nitrogen flow a densification of the AlN coating occurs in the microstructure, with an improvement of the crystallinity along with the increase of the hardness. Thermal stability of aluminum nitride coatings at high temperature was also examined. It was found an improvement of the piezoelectric properties of the highly (10x) oriented AlN films which became c-axis (002) oriented after annealing. The mechanical behavior after heat treatment shows an important enhancement of the surface hardness and Young’s modulus, which decrease rapidly with the increase of the indentation depth until approach constant values close to the substrate properties after annealing. Thus, thermal annealing energy promotes not only the rearrangement of Al–N network, but also the occurrence of a nitriding process of unsaturated Al atoms which cause a surface hardening of the film.

Enhanced resistive switching and multilevel behavior in bilayered HfAlO/HfAlOx structures for non-volatile memory applications

In this work, hafnium aluminum oxide (HfAlO) thin films were deposited by ion beam sputtering deposition technique on Si substrate. The presence of oxygen vacancies in the HfAlOx layer deposited in oxygen deficient environment is evidenced from the photoluminescence spectra. Furthermore, HfAlO(oxygen rich)/HfAlOx(oxygen poor) bilayer structures exhibit multilevel resistive switching (RS), and the switching ratio becomes more prominent with increasing the HfAlO layer thickness. The bilayer structure with HfAlO/HfAlOx thickness of 30/40 nm displays the enhanced multilevel resistive switching characteristics, where the high resistance state/ intermediate resistance state (IRS) and IRS/low resistance state resistance ratios are 102 and 5 105 , respectively. The switching mechanisms in the bilayer structures were investigated by the temperature dependence of the three resistance states. This study revealed that the multilevel RS is attributed to the coupling of ionic conduction and the metallic conduction, being the first associated to the formation and rupture of conductive filaments related to oxygen vacancies and the second with the formation of a metallic filament. Moreover, the bilayer structures exhibit good endurance and stability in time.

Compatibilidade do contrato de concessão comercial com as regras de defesa da concorrência

Dissertação de mestrado em Direito dos Contratos e da Empresa

Prenatal dysthymia versus major depression effects on maternal cortisol and fetal growth

To determine differences between pregnant women diagnosed with Dysthymia versus Major Depression, depressed pregnant women (N=102) were divided by their diagnosis into Dysthymic (N=48) and Major Depression (N=54) groups and compared on self-report measures (depression, anxiety, anger, daily hassles and behavioral inhibition), on stress hormone levels (cortisol and norepinephrine), and on fetal measurements. The Major Depression group had more self-reported symptoms. However, the Dysthymic group had higher prenatal cortisol levels and lower fetal growth measurements (estimated weight, femur length, abdominal circumference) as measured at their first ultrasound (M=18 weeks gestation). Thus, depressed pregnant women with Dysthymia and Major Depression appeared to have different prenatal symptoms.

Atividades de campo no ensino da Geologia: opiniões de professores portugueses sobre formas ideais de as usar

Devido à elevada dimensão espacial e temporal da maior parte dos fenómenos geológicos, não é possível reproduzir no laboratório os fenómenos a estudar, pelo que, se o professor de Geologia pretender colocar os alunos em contato com esses fenómenos, terá que organizar uma saída de campo para que as necessárias e adequadas atividades sejam realizadas no lugar onde esses fenómenos ocorrem. Contudo, e apesar de professores e alunos reconhecerem diversas potencialidades didáticas das saídas de campo, os professores raramente as organizam e justificam isso com base em diversos impedimentos. Neste artigo relatam-se os resultados de um estudo em que 233 professores portugueses de Biologia e Geologia foram inquiridos acerca de formas ideais de integrar as atividades de campo na componente de Geologia, no 3º ciclo do Ensino Básico (n=102) e no Ensino Secundário (n=131). Os resultados sugerem que as práticas que os professores gostariam de implementar, caso não houvesse constrangimentos à realização de atividades de campo, não seriam, na maior parte dos casos, muito diferentes das práticas implementadas que são relatadas na literatura. Esta falta de exigência e de ousadia por parte dos professores, no que concerne ao modo como as atividades de campo deveriam ser utilizadas, sugere a necessidade de a formação inicial e contínua de professores contemplar uma abordagem adequada das saídas de campo e de as escolas se reorganizarem para facilitarem a organização, fundamentada, das mesmas.