Synthesis and biological evaluation of mono and bis-naphthalimide derivatives against SH-SY5Y, human brain cancer cells

Dissertação de mestrado em Medicinal Chemistry

A search for t(t)over-bar resonances using lepton-plus-jets events in proton-proton collisions at root s=8 TeV with the ATLAS detector

A search for new particles that decay into top quark pairs is reported. The search is performed with the ATLAS experiment at the LHC using an integrated luminosity of 20.3 fb−1 of proton-proton collision data collected at a centre-of-mass energy of s√=8 TeV. The lepton-plus-jets final state is used, where the top pair decays to W+bW−b¯¯, with one W boson decaying leptonically and the other hadronically. The invariant mass spectrum of top quark pairs is examined for local excesses or deficits that are inconsistent with the Standard Model predictions. No evidence for a top quark pair resonance is found, and 95% confidence-level limits on the production rate are determined for massive states in benchmark models. The upper limits on the cross-section times branching ratio of a narrow Z′ boson decaying to top pairs range from 4.2 pb to 0.03 pb for resonance masses from 0.4 TeV to 3.0 TeV. A narrow leptophobic topcolour Z′ boson with mass below 1.8 TeV is excluded. Upper limits are set on the cross-section times branching ratio for a broad colour-octet resonance with Γ/m = 15% decaying to tt¯. These range from 4.8 pb to 0.03 pb for masses from 0.4 TeV to 3.0 TeV. A Kaluza-Klein excitation of the gluon in a Randall-Sundrum model is excluded for masses below 2.2 TeV.

Avaliação experimental de compósitos de agregados leves impregnados com PCM, para aplicação em pavimentos rodoviários

Este trabalho visa, em primeiro lugar, a caracterização experimental do comportam ento de argamassas com materiais de mudança de fase (PCM) incorporados através de agregados leves, comparativamente com argamassas de referência sem incorporação de PCM. Verifica-se que a aplicação de argamassas com PCM em camadas de desgaste de pavimentos contribui para a minimização dos potenciais efeitos negativos de gelo e degelo. Os estudos experimentais permitem concluir que o método utilizado de impregnação de PCM em materiais porosos, para posterior incorporação em argamassa ou betão, é um método simples, mas muito eficaz. Os resultados indicam ainda que os materiais compósitos com PCM incorporado, podem melhorar a inércia térmica, bem como, atrasar o tempo de eventual ocorrência de congelamento sob a camada de desgaste de um pavimento

Life cycle analysis of zero waste management for Jonggol green city

A Zero waste management is believed to be one of methods to gain sustainability in urban areas. Take advantages of resources as enough as the needs and process it until the last part to be wasted is a contribution to take care the environment for the next generation. Reduce, reuse, and recycle are three simplesactivities which are until nowadays consideredas the back bone of zero waste. Jonggolgreen city is a new urban area in Indonesia with a 100 ha of surface area zoned as education tourism area. It is an independent area with pure natural resources of water, air, and land to be managed and protected. It is planned as green city through zero waste management since2013. In this preliminary period, a monitoring tool is being prepared by applying a Life Cycle Analysis (LCA) for urban areas [1]. This paper will present an explanatory assessment ofthe zero waste management for Jonggolgreen city. The existing situation will be examined through LCA and afterwards,the new program and the proposed green design to gain the next level of zero waste will be discussed. The purpose is to track the persistence of the commitment and the perception of the necessary innovationsin order to achieve the ideal behavior level of LCA.

Ag-TiNx electrodes deposited on piezoelectric poly(vinylidene fluoride) for biomedical sensor applications

Electroactive polymers are one of the most interesting class of polymers used as smart materials in various applications, such as the development of sensors and actuators for biomedical applications in areas such as smart prosthesis, implantable biosensors and biomechanical signal monitoring, among others. For acquiring or applying the electrical signal from/to the piezoelectric material, suitable electrodes can be produced from Ti based coatings with tailored multifunctional properties, conductivity and antibacterial characteristics, through Ag inclusions. This work reports on Ag-TiNx electrodes, deposited by d. c. and pulsed magnetron sputtering at room temperature on poly(vinylidene fluoride), PVDF, the all-round best piezoelectric polymer.. Composition of the electrodes was assessed by microanalysis X-ray system (EDS - energy dispersive spectrometer). The XRD results revealed that the deposition conditions preserve the polymer structure and suggested the presence of crystalline fcc-TiN phase and fcc-Ag phase in samples with N2 flow above 3 sccm. According to the results obtained from SEM analysis, the coatings are homogeneous and Ag clusters were found for samples with nitrogen flow above 3 sccm. With increasing nitrogen flow, the sheet resistivity tend to be lower than the samples without nitrogen, leading also to a decrease of the piezoelectric response. It is concluded that the deposition conditions do significantly affect the piezoelectric polymer, which maintain its characteristics for sensor/actuator applications.

Influência da corrosão no comportamento ao arrancamento de fibras de aço no betão auto-compactável

Quando adicionadas ao betão, a possibilidade de corrosão das fibras de aço , devido à penetração de cloretos e ação da carbonatação, é um parâmetro de durabilidade no betão auto-compactável reforçado com fibras de aço (BACRFA) que requer especial atenção. No BACRFA fendilhado, a corrosão tende a ocorrer nas fibras de aço que atravessam as fissuras, o que pode afetar o seu comportamento à flexão. Deste modo, o estudo do comportamento interfacial fibra/matriz é importante para a compreensão dos efeitos da corrosão das fibras de aço no comportamento mecânico e na durabilidade das estruturas de BACRFA. Com o intuito de avaliar estes efeitos, no presente trabalho desenvolveu-se um ensaio experimental de arrancamento de fibras de aço em BAC fendilhado, sujeitas previamente à ação da corrosão por exposição a um ambiente agressivo de cloretos, sendo a corrosão avaliada por intermédio de técnicas eletroquímicas. Os ensaios eletroquímicos realizados revelaram que a probabilidade de corrosão das fibras de aço num ambiente com cloretos é superior a 90%. No mesmo ambiente, a susceptibilidade para a corros ão das fibras de aço que atravessam uma pseudo-fissura, aumenta com a abertura de fissura provocando um aumento da resistência ao arranque da fibra em BAC fissurado

O efeito da adição de 40% de cinzas volantes sobre o ingresso de cloretos no betão face à ação combinada entre a carbonatação e os iões cloreto

Além de imprimir um caráter sustentável ao betão, as cinzas volantes (CV) têm sido bastante utilizadas para tornar a matriz cimentícia mais resistente à penetração de Cl-uma vez que tornam a estrutura porosa mais densa e ajudam a fixar Cl-. Por outro lado, sabe-se que o Ca(OH)2 existente na matriz é parcialmente consumido pelas reações pozolânicas, facilitando o avanço da carbonatação e, consequentemente, aumentando a quantidade de Cl-livres. Considerando a ação conjunta destes agentes, especula-se sobre o papel das CV na penetração de Cl-. Foram moldados provetes com 0% e 40% de CV. Após 90 dias de cura os provetes foram submetidos a 12 ciclos de imersão em solução com NaCl e secagem em câmara de carbonatação , num total de 168 dias. Observou-se que os provetes contendo CV, e submetidos à ação combinada, apresentaram perfis de Cl-com teores superiores quando comparados à ação exclusiva dos Cl.

RNA-seq analysis of the Quercus suber root response to drought

Dissertação de mestrado em Plant Molecular Biology, Biotechnology and Bioentrepreneurship

Search for the associated production of the Higgs boson with a top quark pair in multilepton final states with the ATLAS detector

A search for the associated production of the Higgs boson with a top quark pair is performed in multilepton final states using 20.3 fb−1 of proton-proton collision data recorded by the ATLAS experiment at s√=8 TeV at the Large Hadron Collider. Five final states, targeting the decays H→WW∗, ττ, and ZZ∗, are examined for the presence of the Standard Model (SM) Higgs boson: two same-charge light leptons (e or μ) without a hadronically decaying τ lepton; three light leptons; two same-charge light leptons with a hadronically decaying τ lepton; four light leptons; and one light lepton and two hadronically decaying τ leptons. No significant excess of events is observed above the background expectation. The best fit for the tt¯H production cross section, assuming a Higgs boson mass of 125 GeV, is 2.1+1.4−1.2 times the SM expectation, and the observed (expected) upper limit at the 95% confidence level is 4.7 (2.4) times the SM rate. The p-value for compatibility with the background-only hypothesis is 1.8σ; the expectation in the presence of a Standard Model signal is 0.9σ.

Metabolic engineering with multi-objective optimization of kinetic models

Kinetic models have a great potential for metabolic engineering applications. They can be used for testing which genetic and regulatory modifications can increase the production of metabolites of interest, while simultaneously monitoring other key functions of the host organism. This work presents a methodology for increasing productivity in biotechnological processes exploiting dynamic models. It uses multi-objective dynamic optimization to identify the combination of targets (enzymatic modifications) and the degree of up- or down-regulation that must be performed in order to optimize a set of pre-defined performance metrics subject to process constraints. The capabilities of the approach are demonstrated on a realistic and computationally challenging application: a large-scale metabolic model of Chinese Hamster Ovary cells (CHO), which are used for antibody production in a fed-batch process. The proposed methodology manages to provide a sustained and robust growth in CHO cells, increasing productivity while simultaneously increasing biomass production, product titer, and keeping the concentrations of lactate and ammonia at low values. The approach presented here can be used for optimizing metabolic models by finding the best combination of targets and their optimal level of up/down-regulation. Furthermore, it can accommodate additional trade-offs and constraints with great flexibility.

Endoscopic retrograde cholangiopancreatography for suspected choledocholithiasis : from guidelines to clinical practice

Endoscopic retrograde cholangiopancreatography for suspected choledocholithiasis: From guidelines to clinical practice.

Morphology and oxygen incorporation effect on antimicrobial activity of silver thin films

Ag and AgxO thin films were deposited by non-reactive and reactive pulsed DC magnetron sputtering, respectively, with the final propose of functionalizing the SS316L substrate with antibacterial properties. The coatings were characterized chemically, physically and structurally. The coatings nanostructure was assessed by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), while the coatings morphology was determined by scanning electron microscopy (SEM). The XRD and XPS analyses suggested that Ag thin film is composed by metallic Ag, which crystallizes in fcc-Ag phase, while the AgxO thin film showed both metallic Ag and Ag-O bonds, which crystalize in fcc-Ag and silver oxide phases. The SEM results revealed that Ag thin film formed a continuous layer, while AgxO layer was composed of islands with hundreds of nanometers surrounded by small nanoparticles with tens of nanometers. The surface wettability and surface tension parameters were determined by contact angle measurements, being found that Ag and AgxO surfaces showed very similar behavior, with all the surfaces showing a hydrophobic character. In order to verify the antibacterial behavior of the coatings, halo inhibition zone tests were realized for Staphylococcus epidermidis and Staphylococcus aureus. Ag coatings did not show antibacterial behavior, contrarily to AgxO coating, which presented antibacterial properties against the studied bacteria. The presence of silver oxide phase along with the development of different morphology were pointed as the main factors in the origin of the antibacterial effect found in AgxO thin film. The present study demonstrated that AgxO coating presented antibacterial behavior and its application in cardiovascular stents is promising.

Engineering a commercial cold-adapted xylanase for improved low pH stability

Dissertação de mestrado em Genética Molecular