Out-of-plane behavior of masonry infill walls

In order to investigate the out-of-plane behaviour of masonry infill walls, quasi-static testing was performed on a masonry infill walls built inside a reinforced concrete frame by means of an airbag system to apply the uniform out-of-plane load to each component of the infill. The main advantage of this testing setup is that the out-of-plane loading can be applied more uniformly in the walls, contrarily to point load configuration. The test was performed under displacement control by selecting the mid-point of the infill as control point. Input and output air in the airbag was controlled by using a software to apply a specific displacement in the control point of the infill wall. The effect of the distance between the reaction frame of the airbag and the masonry infill on the effective contact area was previously analysed. Four load cells were attached to the reaction frame to measure the out-of-plane force. The effective contact area of the airbag was calculated by dividing the load measured in load cells by the pressure inside the airbag. When the distance between the reaction walls and the masonry infill wall is smaller, the effective area is closer to the nominal area of the airbag. Deformation and crack patterns of the infill confirm the formation of arching mechanism and two-way bending of the masonry infill. Until collapse of the horizontal interface between infill and upper beam in RC frame, the infill bends in two directions but the failure of that interface which is known as weakest interface due to difficulties in filling the mortar between bricks of last row and upper beam results in the crack opening trough a well-defined path and the consequent collapse of the infill.

In-plane and out-of plane experimental characterization of rc masonry infilled frames

Seismic investigations of typical south European masonry infilled frames were performed by testing two reduced scale specimens: one in the in-plane direction and another in the out-ofplane direction. Information about geometry and reinforcement scheme of those structures constructed in 1980s were obtained by [1]. The specimen to be tested in the in-plane direction was constructed as double leaf masonry while the specimen for testing in the out-of-plane direction is constructed with only its exterior leaf since the recent earthquakes have highlighted the vulnerability of the external leaf of the infills in out-of-plane direction [2]. The tests were performed by applying the pre-defined values of displacements in the in-plane and out-of-plane directions in the control points. For in-plane testing it was done by hydraulic actuator and for out-of-plane testing through the application of an airbag. Input and output air in the airbag was controlled by using a software to apply a specific displacement in the control point of the infill wall. Mid-point of the infill was assumed as a control point for outof- plane testing. Deformation and crack patterns of the infill confirm the formation of two-way arching mechanism of the masonry infill until collapse of the upper horizontal interface between infill and frame which is known as weakest interface due to difficulties in filling the mortar between bricks of last row and upper beam. This results in the crack opening through a welldefined path and the consequent collapse of the infill.

Grafting of adipic anhydride to carbon nanotubes through a Diels-Alder cycloaddition/oxidation cascade reaction

Accepted Manuscript

Implementation and comparison of different switching techniques for shunt active power filters

This paper presents a comparison between three switching techniques that can be used in three-phase four-wire Shunt Active Power Filters (SAPFs). The implemented switching techniques are: Periodic-Sampling (PS), Triangular Carrier Pulse-Width Modulation (TC-PWM) and Space Vector PWM (SVPWM). The comparison between them is made in terms of the compensated currents THD%, implementation complexity, necessary CPU time and SAPF efficiency. To perform this comparison are presented and analyzed several experimental results, obtained with a 20 kVA Shunt Active Power Filter prototype, specially developed for this purpose. The control system of the developed SAPF is based in the p-q Theory with a grid synchronization algorithm p-PLL.

Bidirectional battery charger with grid-to-vehicle, vehicle-to-grid and vehicle-to-home technologies

This paper presents the development of na on-board bidirectional battery charger for Electric Vehicles (EVs) targeting Grid-to-Vehicle (G2V), Vehicle-to-Grid (V2G), and Vehicle-to-Home (V2H) technologies. During the G2V operation mode the batteries are charged from the power grid with sinusoidal current and unitary power factor. During the V2G operation mode the energy stored in the batteries can be delivered back to the power grid contributing to the power system stability. In the V2H operation mode the energy stored in the batteries can be used to supply home loads during power outages, or to supply loads in places without connection to the power grid. Along the paper the hardware topology of the bidirectional battery charger is presented and the control algorithms are explained. Some considerations about the sizing of the AC side passive filter are taken into account in order to improve the performance in the three operation modes. The adopted topology and control algorithms are accessed through computer simulations and validated by experimental results achieved with a developed laboratory prototype operating in the different scenarios.

Integrated management systems: A model for maturity assessment

Maturity models are adopted to minimise our complexity perception over a truly complex phenomenon. In this sense, maturity models are tools that enable the assessment of the most relevant variables that impact on the outputs of a specific system. Ideally a maturity model should provide information concerning the qualitative and quantitative relationships between variables and how they affect the latent variable, that is, the maturity level. Management systems (MSs) are implemented worldwide and by an increasing number of companies. Integrated management systems (IMSs) consider the implementation of one or several MSs usually coexisting with the quality management subsystem (QMS). It is intended in this chapter to report a model based on two components that enables the assessment of the IMS maturity, considering the key process agents (KPAs) identified through a systematic literature review and the results collected from two surveys.

O jogo como potencializador da motivação para a aprendizagem: (des)envolvimento(s) através de um projeto curricular integrado

Relatório de estágio de mestrado em Educação Pré-Escolar e Ensino do 1.º Ciclo do Ensino Básico

Escola, democracia e autonomia: uma análise das políticas e práticas no cotidiano escolar

Tese de Doutoramento em Ciências da Educação - Especialidade em Política Educativa

Relação entre coordenação motora e comportamento sedentário, em crianças

Relatório de atividade profissional de mestrado em Ensino de Educação Física nos Ensinos Básico e Secundário

Reverse engineering of web applications

The MAP-i Doctoral Program of the Universities of Minho, Aveiro and Porto

Tax compliance and tax complexity in Portugal: essays on the perception of tax professionals

Tese de Doutoramento em Contabilidade.

Uma ontologia para os processos de negócio da Administração

O órgão coordenador da política arquivística portuguesa promoveu a constituição de uma Lista consolidada (LC) de processos de processos de negócio da Administração Pública (AP). Esta lista de natureza incremental e colaborativa foi desenvolvida a partir da identificação de uma macroestrutura representativa das funções exercidas pela AP, a Macroestrutura Funcional (MEF). Concretizado este produto e colocado à disposição da comunidade, na página oficial da Direção-Geral do Livro, dos Arquivos e das Bibliotecas (DGLAB), importa potenciar a sua aplicabilidade. Neste sentido, encontra-se em curso um projeto que envolve os autores, em contexto universitário, orientado para o desenvolvimento de um vocabulário formal, um modelo de dados que represente este conjunto de conceitos referentes aos processos de negócio e aos relacionamentos entre eles. Pretende-se que esta ontologia possa vir a ser disponibilizada em listas ou diretórios de ontologias com mecanismos de pesquisa (bibliotecas de ontologias) de modo a incrementar a sua utilização na websemântica, para além da sua utilização como esquema de classificação em sistemas eletrónicos de gestão de arquivos (SEGA), businesse intelligence systems e sistemas de gestão do conhecimento. Com esta comunicação pretende-se dar a conhecer à comunidade de profissionais um projeto de aplicação transversal para todas as entidades públicas e para as empresas com interesse na área.

Da gestão da informação à gestão do conhecimento: uma proposta para a e-Administração em Portugal

O trabalho proposto tem como objetivo apresentar um projeto de elaboração de um sistema de informação que visa gerir o desenvolvimento de uma ontologia promovida pelo organismo de coordenação da política arquivística para a classificação e avaliação da informação na Administração Central e Local, em Portugal. Entre os produtos propostos a partir do referido sistema, conta-se um website no qual é possível consultar toda a informação contida na ontologia, bem como descarregar versões da mesma, com níveis diferentes de semântica. A referida ontologia foi promovida pelo órgão coordenador da política arquivística portuguesa, e tem por base uma Lista consolidada (LC) de processos de processos de negócio da Administração Pública (AP). Esta lista de natureza incremental e colaborativa foi desenvolvida a partir da identificação de uma macroestrutura representativa das funções exercidas pela AP, a Macroestrutura Funcional (MEF). Concretizado este produto e colocado à disposição da comunidade, na página oficial da Direção-Geral do Livro, dos Arquivos e das Bibliotecas (DGLAB), importa potenciar a sua aplicabilidade. Neste sentido, encontra-se em curso um projeto que envolve os autores, em contexto universitário, orientado para o desenvolvimento de um vocabulário formal, um modelo de dados que represente este conjunto de conceitos referentes aos processos de negócio e aos relacionamentos entre eles. Pretende-se que esta ontologia possa vir a ser disponibilizada em listas ou diretórios de ontologias com mecanismos de pesquisa (bibliotecas de ontologias) de modo a incrementar a sua utilização na web semântica, para além da sua utilização como esquema de classificação em sistemas eletrónicos de gestão de arquivos (SEGA), businesse intelligence systems e sistemas de gestão do conhecimento. Com esta comunicação pretende-se dar a conhecer à comunidade de profissionais um projeto de aplicação transversal para todas as entidades públicas e para as empresas com interesse na área.

The role of ascorbate peroxidase, guaiacol peroxidase, and polysaccharides in cassava (Manihot esculenta Crantz) roots under postharvest physiological deterioration

Abstract This study aimed to investigate the role of ascorbate peroxidase (APX), guaiacol peroxidase (GPX), polysaccharides, and protein contents associated with the early events of postharvest physiological deterioration (PPD) in cassava roots. Increases in APX and GPX activity, as well as total protein contents occurred from 3 to 5 days of storage and were correlated with the delay of PPD. Cassava samples stained with periodic acid-Schiff (PAS) highlighted the presence of starch and cellulose. Degradation of starch granules during PPD was also detected. Slight metachromatic reaction with toluidine blue is indicative of increasing of acidic polysaccharides and may play an important role in PPD delay. Principal component analysis (PCA) classified samples according to their levels of enzymatic activity based on the decision tree model which showed GPX and total protein amounts to be correlated with PPD. The Oriental (ORI) cultivar was more susceptible to PPD.

Sistema de predição de avarias em máquinas de unidades fabris globalmente dispersas

Tese de Doutoramento Ramo Engenharia Industrial e de Sistemas