Miniature cone tip resistance of sand with fly ash using triaxial setup

In a continuation of the authors' recent work, the ultimate tip resistance of a miniature cone using triaxial equipment was determined for samples of dry sand mixed with dry fly ash. The effect of (i) the proportion of fly ash, (ii) the relative density of samples, and (iii) the vertical overburden pressure was examined. It was noted that an addition of fly ash in sand for the same range of relative density leads to a significant reduction in the ultimate tip resistance of the cone (q(cu)). This occurs due to a decrease in the friction angle (phi) of the sample with an increase in the fly ash content for a given relative density. For phi greater than about 30 degrees, two widely used correlation curves from published literature, providing the relationships between q(cu) and phi for cohesionless soils, were found to provide satisfactory predictions, even for sand - fly ash mixtures. As was expected, the values of qcu increase continuously with an increase in the relative density of the soil mass and the vertical effective ( overburden) stress on the sample.

Prediction of compressive strength of SCC and HPC with high volume fly ash using ANN

An artificial neural network (ANN) is presented to predict a 28-day compressive strength of a normal and high strength self compacting concrete (SCC) and high performance concrete (HPC) with high volume fly ash. The ANN is trained by the data available in literature on normal volume fly ash because data on SCC with high volume fly ash is not available in sufficient quantity. Further, while predicting the strength of HPC the same data meant for SCC has been used to train in order to economise on computational effort. The compressive strengths of SCC and HPC as well as slump flow of SCC estimated by the proposed neural network are validated by experimental results.

Impact of African orography and the Indian summer monsoon on the low-level Somali jet

The low-level jet (LLJ) over the Indian region, which is most prominent during the monsoon (June-September) season, has been studied with a general circulation model (GCM). The role of African orography in modulating this jet is the focus of this article. The presence o African orography intensifies the cross-equatorial flow. Contrary to previous modelling Studies we find that cross-equatorial flow occurs even in the absence of African orography, though this flow is muc weaker even when the Indian monsoon rainfall is high. However, the location of the meridional jet near the equator in the Somali region is linked to the Indian monsoon rainfall rather than to the land-sea contrast over Somalia. Also, the presence of African orography, and not the strength of the Indian monsoon, controls the vertical extent of the equatorial meridional wind. In an aqua-planet simulation, the cross-equatorial flow occurs about 30 to the west of the rainfall maximum. Thus, the longitudinal location of the equatorial Somali jet depends upon the occurrence of monsoon heating, but the vertical structure of the jet is on account of the western boundary current in the atmosphere due to the East African highlands under the influence of monsoonal heat source.

Predatory and trophobiont-tending ants respond differently to fig and fig wasp volatiles

The interaction between figs and their pollinating or parasitic fig wasps is mediated largely by chemical communication. These fig wasps are often preyed upon by predatory ants. In this study, we found that predatory ants (Oecophylla smaragdina) patrolling Ficus racemosa trees were attracted to the odour from fig syconia at different developmental phases, as well as to the odours of fig wasps, whereas other predatory ants (Technomyrmex albipes) responded only to odours of syconia from which fig wasps were dispersing and to fig wasp odour. However, trophobiont-tending ants (Myrmicaria brunnea) patrolling the same trees and exposed to the same volatiles were unresponsive to fig or fig wasp odours. The predatory ants demonstrated a concentration-dependent response towards volatiles from figs receptive to pollinators and those from which wasps were dispersing while the trophobiont-tending ants were unresponsive to such odours at all concentrations. Naive predatory ants failed to respond to the volatiles to which the experienced predatory ants responded, indicating that the response to fig-related odours is learned. We suggest that predatory ants could use fig-associated volatiles to enhance their probability of wasp encounter and can eavesdrop on signals meant for pollinators. (C) 2009 The Association for the Study of Animal Behaviour.

Comparative life-history traits in a fig wasp community: implications for community structure

1. Whether life-history traits can determine community composition and structure is an important question that has been well explored theoretically, but has received scant empirical attention. Life-history traits of a seven-member community of galler and parasitoid fig wasp species (Chalcidoidea), developing within the inflorescences (syconia) of Ficus racemosa (Moraceae) in India, were determined and used to examine community structure and ecology. 2. Gallers were pro-ovigenic (all eggs are mature upon adult emergence) whereas parasitoids were synovigenic (eggs mature progressively during adult lifespan). Initial egg load was correlated with body size for some species, and there was a trade-off between egg number and egg size across all species. Although all species completed their development and left the syconium concurrently, they differed in their adult and pre-adult lifespans. Providing sucrose solutions increased parasitoid lifespan but had no effect on the longevity of some galler species. While feeding regimes and body size affected longevity in most species, an interaction effect between these variables was detected for only one species. 3. Life-history traits of wasp species exhibited a continuum in relation to their arrival sequence at syconia for oviposition during syconium development, and therefore reflected their ecology. The largest number of eggs, smallest egg sizes, and shortest longevities were characteristic of the earliest-arriving galling wasps at the smallest, immature syconia; the converse characterised the later-arriving parasitoids at the larger, already parasitised syconia. Thus life history is an important correlate of community resource partitioning and can be used to understand community structure. 4. This is the first comprehensive study of life-history traits in a fig wasp community. The comparative approach revealed constraints and flexibility in trait evolution.

Multi power port converter for hybrid electric vehicles using multi phase bidirectional fly-back topology

For hybrid electric vehicles the batteries and the drive dc-link may be at different voltages. The batteries are at low voltage to obtain higher volumetric efficiencies and the dc-link is at higher voltage to have higher efficiency on the motor side. Therefore a power interface between the batteries and the drive's dc-link is essential. This power interface should handle power flow from battery to motor, motor to battery, external genset to battery and grid to battery. This paper proposes a multi power port topology which is capable of handling multiple power sources and still maintains simplicity and features like obtaining any gain, wide load variations, lower output current ripple and capability of parallel battery energy due to the modular structure. The development and testing of a bi-directional fly-back DC-DC converter for hybrid electric vehicle is described in this paper. Simple hysteresis voltage control is used for DC link voltage regulation. The experimental results are presented to show the working of the proposed converter.

A hitchhiker's guide to a crowded syconium: how do fig nematodes find the right ride?

P>1Organisms with low mobility, living within ephemeral environments,need to find vehicles that can disperse them reliably to new environments. The requirement for specificity in this passenger-vehicle relationship is enhanced within a tritrophic interaction when the environment of passenger and vehicle is provided by a third organism. Such relationships pose many interesting questions about specificity within a tritrophic framework. 2. Central to understanding how these tritrophic systems have evolved, is knowing how they function now. Determining the proximal cues and sensory modalities used by passengers to find vehicles and to discriminate between reliable and non-reliable vehicles is, therefore, essential to this investigation. 3. The ancient, co-evolved and highly species-specific nursery pollination mutualism between figs and fig wasps is host to species-specific plant-parasitic nematodes which use fig wasps to travel between figs. Since individual globular fig inflorescences, i.e. syconia, serve as incubators for hundreds of developing pollinating and parasitic wasps, a dispersal-stage nematode within such a chemically,complex and physically crowded environment is faced with the dilemma of choosing the right vehicle for dispersal into a new fig. Such a system therefore affords excellent opportunities to investigate mechanisms that contribute to the evolution of specificity between the passenger and the vehicle. 4. In this study of fig-wasp-nematode tritrophic interactions in Ficus racemosa within which seven wasp species can breed, we demonstrate using two-choice as well as cafeteria assays that plant-parasitic nematodes (Schistonchus racemosa) do not hitch rides randomly on available eclosing wasps within the fig syconium, but are specifically attracted, at close range, i.e. 3 mm distance, to only that vehicle which can quickly, within a few hours, reliably transfer it to another fig. This vehicle is the female pollinating wasp. Male wasps and female parasitic wasps are inappropriate vehicles since the former are wingless and die within the fig, while the latter never enter another fig. Nematodes distinguished between female pollinating wasps and other female parasitic wasps using volatiles and cuticular hydrocarbons. Nematodes could not distinguish between cuticular hydrocarbons of male and female pollinators but used other cues, such as volatiles, at close range, to find female pollinating wasps with which they have probably had a long history of chemical adaptation. 5. This study opens up new questions and hypotheses about the evolution and maintenance of specificity in fig-wasp-nematode tritrophic interactions.

Leaching behavior of Indian fly ashes by an oedometer method

Thermal power stations use pulverized coal as fuel, producing enormous quantities of ash as a by-product of combustion. Currently, with very low utilization of the ash produced, the ash deposits at the thermal power stations are increasing rapidly. The disposal problem is expected to become alarming due to the limited space available for ash disposal near most thermal power stations. Among the various applications available for the use of fly ash, geotechnical application offers opportunity for its bulk utilization. However, the possibility of ground and surface water contamination due to the leaching of toxic elements present in the fly ash needs to be addressed. This paper describes a study carried out on two Indian fly ashes. It is found that pH is the controlling factor in the leaching behavior of fly ashes.

Temporal associations in fig-wasp-ant interactions: diel and phenological patterns

In a complex multitrophic plant-animal interaction system in which there are direct and indirect interactions between species, comprehending the dynamics of these multiple partners is very important for an understanding of how the system is structured. We investigated the plant Ficus racemosa L. (Moraceae) and its community of obligatory mutualistic and parasitic fig wasps (Hymenoptera: Chalcidoidea) that develop within the fig inflorescence or syconium, as well as their interaction with opportunistic ants. We focused on temporal resource partitioning among members of the fig wasp community over the development cycle of the fig syconia during which wasp oviposition and development occur and we studied the activity rhythm of the ants associated with this community. We found that the seven members of the wasp community partitioned their oviposition across fig syconium development phenology and showed interspecific variation in activity across the day-night cycle. The wasps presented a distinct sequence in their arrival at fig syconia for oviposition, with the parasitoid wasps following the galling wasps. Although fig wasps are known to be largely diurnal, we documented night oviposition in several fig wasp species for the first time. Ant activity on the fig syconia was correlated with wasp activity and was dependent on whether the ants were predatory or trophobiont-tending species; only numbers of predatory ants increased during peak arrivals of the wasps.

Leachability of trace elements from two stabilized low lime Indian fly ashes

Fly ash is a waste by-product obtained from the burning of coal by thermal power plants for generating electricity. When bulk quantities are involved, in order to arrest the fugitive dust, it is stored wet rather than dry. Fly ash contains trace concentrations of heavy metals and other substances in sufficient quantities to be able to leach out over a period of time. In this study an attempt was made to study the leachabilities of a few selected trace metals: Cd, Cu, Cr, Mn, Pb and Zn from two different types of class F fly ashes. Emphasis is also laid on developing an alternative in order to arrest the relative leachabilities of heavy metals after amending them with suitable additives. A standard laboratory leaching test for combustion residues has been employed to study the leachabilities of these trace elements as a function of liquid to solid ratio and pH. The leachability tests were conducted on powdered fly ash samples before and after amending them suitably with the matrices lime and gypsum; they were compacted to their respective proctor densities and cured for periods of 28 and 180 days. A marked reduction in the relative leachabilities of the trace elements was observed to be present at the end of 28 days. These relative leachability values further reduced marginally when tests were performed at the end of 180 days.

Role of Gypsum in the Strength Development of Fly Ashes with Lime

The strength of fly ash mixture often needs to be enhanced for its better utilization in geotechnical and environmental applications. Many fly ashes often improve their strength with lime but may not meet the requirements. Gypsum, which reduces the lime leachability, further improves the strength. An attempt is made in this paper to study the effect of gypsum on the strength development of two Class F fly ashes with different lime contents after curing them for different periods. The sustainability of improved strength has been examined after soaking the cured specimens in water and with different leachates containing heavy-metal ions. The strength of both the fly ashes investigated improved markedly up to a particular amount of the lime content, which can be taken as optimum lime content, and thereafter the improvement is gradual. The improvement in strength at higher lime contents continues for a longer period (even up to 180 days). Gypsum accelerates the gain in strength for lime-stabilized fly ashes, particularly in the initial curing periods at about optimum lime content. At high lime contents gypsum attributes very high strength after curing for long periods mainly due to the alteration of fly ash lime reaction compounds. Gypsum not only improves the reduction in the loss of strength due to soaking even at low curing periods but also improves the durability of stabilized fly ashes due to repeated cycles of wetting and drying.

Gypsum treated fly ash as a liner for waste disposal facilities

Fly ash has potential application in the construction of base liners for waste containment facilities. While most of the fly ashes improve in the strength with curing, the ranges of permeabilities they attain may often not meet the basic requirement of a liner material. An attempt has been made in the present context to reduce the hydraulic conductivity by adding lime content up to 10% to two selected samples of class F fly ashes. The use of gypsum, which is known to accelerate the unconfined compressive strength by increasing the lime reactivity, has been investigated in further improving the hydraulic conductivity. Hydraulic conductivities of the compacted specimens have been determined in the laboratory using the falling head method. It has been observed that the addition of gypsum reduces the hydraulic conductivity of the lime treated fly ashes. The reduction in the hydraulic conductivity of the samples containing gypsum is significantly more for samples with high amounts of lime contents (as high as 1000 times) than those fly ashes with lower amounts of lime. However there is a relatively more increase in the strengths of the samples with the inclusion of gypsum to the fly ashes at lower lime contents. This is due to the fact that excess lime added to fly ash is not effectively converted into pozzolanic compounds. Even the presence of gypsum is observed not to activate these reactions with excess lime. On the other hand the higher amount of lime in the presence of sulphate is observed to produce more cementitious compounds which block the pores in the fly ash. The consequent reduction in the hydraulic conductivity of fly ash would be beneficial in reducing the leachability of trace elements present in the fly ash when used as a base liner. (C) 2010 Elsevier Ltd. All rights reserved.

Proportioning of fly-ash cement concrete mixes

The accumulation of fly ash throughout the world is several million tons per day. The main problem with the usage of fly ash is the slow rate of strength gain, primarily due to slow pozzolanic reactions. Existing methods of proportioning fly ash concrete are lacking. These methods are involved and do not directly take into account the properties of the constituent materials. The Generalized Approach for Mix Proportioning developed at the Indian Institute of Science, Bangalore, is the basis for the development of the proposed method, which takes into account the characteristics of cement, fly ash, and aggregates. Based on the basic trial mix data obtained by using the American Concrete Institute (ACI 211.1-81) method, the proportions of fly-ash concrete mixes were arrived at using the Generalized Approach for Mix Proportioning. The method proposed was applied to and found applicable for fly-ash concretes using fly ashes from two different sources.

Fly ash as a pre-filter material for the retention of lead ions

Clay liners have been widely used to contain toxic and hazardous waste materials. Clays absorb contaminant cations due to their exchange capacity. To improve the performance of the clay liner, fly ash, a waste material arising from the combustion of coal has been studied as a pre-filter material. In particular, the retention of lead by two different fly ashes was studied. The influence of pH on retention as well as leaching characteristics are also examined. The results obtained from the retention experiments by the permeameter method indicate that fly ash retains the lead ions through precipitation in the pores as well as onto the surface when the ambient pH value is more than 5.5, and through adsorption when the pH value is less than 5.5. It has been observed that fly ash did not release the retained lead ions when the pH value is between 3.5 and 10.0. Hence, the retention of lead ions by fly ash is likely to be permanent since the pH of most of the municipal landfill leachates are within 3.7 to 8.8. However, for highly acidic or alkaline leachates, the retained ions can get released.