Atomic resolution studies of oxide superlattices and ultrathin films

The ability to grow ultrathin films layer-by-layer with well-defined epitaxial relationships has allowed research groups worldwide to grow a range of artificial films and superlattices, first for semiconductors, and now with oxides. In the oxides thin film research community, there have been concerted efforts recently to develop a number of epitaxial oxide systems grown on single crystal oxide substrates that display a wide variety of novel interfacial functionality, such as enhanced ferromagnetic ordering, increased charge carrier density, increased optical absorption, etc, at interfaces. The magnitude of these novel properties is dependent upon the structure of thin films, especially interface sharpness, intermixing, defects, and strain, layering sequence in the case of superlattices and the density of interfaces relative to the film thicknesses. To understand the relationship between the interfacial thin film oxide atomic structure and its properties, atomic scale characterization is required. Transmission electron microscopy (TEM) offers the ability to study interfaces of films at high resolution. Scanning transmission electron microscopy (STEM) allows for real space imaging of materials with directly interpretable atomic number contrast. Electron energy loss spectroscopy (EELS), together with STEM, can probe the local chemical composition as well as local electronic states of transition metals and oxygen. Both techniques have been significantly improved by aberration correctors, which reduce the probe size to 1 Å, or less. Aberration correctors have thus made it possible to resolve individual atomic columns, and possibly probe the electronic structure at atomic scales. Separately, using electron probe forming lenses, structural information such as the crystal structure, strain, lattice mismatches, and superlattice ordering can be measured by nanoarea electron diffraction (NED). The combination of STEM, EELS, and NED techniques allows us to gain a fundamental understanding of the properties of oxide superlattices and ultrathin films and their relationship with the corresponding atomic and electronic structure. In this dissertation, I use the aforementioned electron microscopy techniques to investigate several oxide superlattice and ultrathin film systems. The major findings are summarized below. These results were obtained with stringent specimen preparation methods that I developed for high resolution studies, which are described in Chapter 2. The essential materials background and description of electron microscopy techniques are given in Chapter 1 and 2. In a LaMnO3-SrMnO3 superlattice, we demonstrate the interface of LaMnO3-SrMnO3 is sharper than the SrMnO3-LaMnO3 interface. Extra spectral weights in EELS are confined to the sharp interface, whereas at the rougher interface, the extra states are either not present or are not confined to the interface. Both the structural and electronic asymmetries correspond to asymmetric magnetic ordering at low temperature. In a short period LaMnO3-SrTiO3 superlattice for optical applications, we discovered a modified band structure in SrTiO3 ultrathin films relative to thick films and a SrTiO3 substrate, due to charge leakage from LaMnO3 in SrTiO3. This was measured by chemical shifts of the Ti L and O K edges using atomic scale EELS. The interfacial sharpness of LaAlO3 films grown on SrTiO3 was investigated by the STEM/EELS technique together with electron diffraction. This interface, when prepared under specific conditions, is conductive with high carrier mobility. Several suggestions for the conductive interface have been proposed, including a polar catastrophe model, where a large built-in electric field in LaAlO3 films results in electron charge transfer into the SrTiO3 substrate. Other suggested possibilities include oxygen vacancies at the interface and/or oxygen vacancies in the substrate. The abruptness of the interface as well as extent of intermixing has not been thoroughly investigated at high resolution, even though this can strongly influence the electrical transport properties. We found clear evidence for cation intermixing through the LaAlO3-SrTiO3 interface with high spatial resolution EELS and STEM, which contributes to the conduction at the interface. We also found structural defects, such as misfit dislocations, which leads to increased intermixing over coherent interfaces.

Computational modeling of laser-induced delamination testing of thin films

Thin film adhesion often determines microelectronic device reliability and it is therefore essential to have experimental techniques that accurately and efficiently characterize it. Laser-induced delamination is a novel technique that uses laser-generated stress waves to load thin films at high strain rates and extract the fracture toughness of the film/substrate interface. The effectiveness of the technique in measuring the interface properties of metallic films has been documented in previous studies. The objective of the current effort is to model the effect of residual stresses on the dynamic delamination of thin films. Residual stresses can be high enough to affect the crack advance and the mode mixity of the delimitation event, and must therefore be adequately modeled to make accurate and repeatable predictions of fracture toughness. The equivalent axial force and bending moment generated by the residual stresses are included in a dynamic, nonlinear finite element model of the delaminating film, and the impact of residual stresses on the final extent of the interfacial crack, the relative contribution of shear failure, and the deformed shape of the delaminated film is studied in detail. Another objective of the study is to develop techniques to address issues related to the testing of polymeric films. These type of films adhere well to silicon and the resulting crack advance is often much smaller than for metallic films, making the extraction of the interface fracture toughness more difficult. The use of an inertial layer which enhances the amount of kinetic energy trapped in the film and thus the crack advance is examined. It is determined that the inertial layer does improve the crack advance, although in a relatively limited fashion. The high interface toughness of polymer films often causes the film to fail cohesively when the crack front leaves the weakly bonded region and enters the strong interface. The use of a tapered pre-crack region that provides a more gradual transition to the strong interface is examined. The tapered triangular pre-crack geometry is found to be effective in reducing the stresses induced thereby making it an attractive option. We conclude by studying the impact of modifying the pre-crack geometry to enable the testing of multiple polymer films.

Sexuality in the media and emotional well-being among lesbian, gay, & bisexual adolescents

LGB teens’ feelings, desires, and physical attractions run contrary to the heteronormative standards of American society. As such, LGB youth often experience feelings of sadness and dejection that can lead to depression and suicidal tendencies (Russell & Joyner, 2001). Evaluating the factors that could possibly influence the emotional well-being of LGB youth would be an important undertaking given the hindrances LGB adolescents face during sexual socialization. The purpose of this dissertation was to study the portrayal of sexuality in media popular with LGB adolescents and to assess the relationship between media exposure and emotional well-being among LGB teens. In particular, this dissertation distinguished between mainstream media and gay- and lesbian-oriented (GLO) media. GLO media were defined as any media outlet specifically designed, produced, and marketed for gay and lesbian audiences. Two studies were conducted to serve as the initial investigation in a program of research that will be designed to better understand the role of media in the lives of LGB individuals. The first study of this dissertation was a content analysis of the television programs, films, songs, and magazines most popular with LGB teens as determined by self-reports of media consumption in a survey of media use. A total of 96 media vehicles composed the content analysis sample, including 48 television programs, 22 films, 25 musical artists, and 6 magazines. Using a coding scheme that was adapted from previous media sex research, Study 1 measured the frequency of sexual instances as well as the type, nature, and source characteristics for each sexual instance. Results of the content analysis suggest that heterosexuality reigns supreme in mainstream media. When LGB sexuality is depicted in mainstream media, it is often sanitized. LGB sexual talk is rarely sexual; rather it is primarily about the social or cultural components of being lesbian, gay, or bisexual. LGB sexual behavior is also rare in mainstream media, which tend to depict LGB individuals as non-sexually as possible. LGB sexuality in mainstream media exists, but is more about proclaiming LGB identity than actually living it. GLO media depicted LGB sexuality more frequently than mainstream media did. GLO media often depict LGB sexuality in a more realistic manner. LGB sexual talk is about LGB identity, as well as the relational and sexual aspects of being a sexual minority. LGB sexual behavior is commonplace in GLO media, depicting LGB individuals as sexual beings. LGB sexuality in GLO media is prevalent and relatively authentic. The second study was a survey that assessed the relationship between media exposure (both mainstream media and GLO media) and LGB teens’ emotional well-being, considering self-discrepancy as an important mediating variable in that relationship. Study 2 also considered age, sex, and sexual identity commitment as possible moderating variables in the relationship between media exposure and emotional well-being. In Study 2, emotional well-being was defined as lower levels of dejection-related emotions. LGB adolescents (N = 573) completed a questionnaire that was used to investigate the relationships between media exposure and emotional well-being. Results of the survey indicated that mainstream media exposure was not significantly associated with dejection-related emotions. In contrast, GLO media exposure was negatively related to feelings of dejection even when controlling for age, sex, race, perceived social support, school climate, religiosity, geographical location, sexuality of peers, and motivation for viewing LGB inclusive media content. Neither age nor sex moderated the relationships between media exposure variables and dejection, but sexual identity commitment did act as a moderator in the relationship between GLO media exposure and dejection. The negative relationship between GLO media exposure and dejection was stronger for participants lower in sexual identity commitment than for participants higher in sexual identity commitment. In addition, the magnitude of discrepancies between the actual self and the ideal self mediated the relationship between GLO media exposure and dejection for LGB adolescents low in sexual identity commitment. However, self-discrepancy did not mediate the relationship between GLO media exposure and dejection for LGB teens highly committed to their sexual identities. Results of both the content analysis and the survey are discussed in terms of implications for theory and method. Practical implications of this dissertation’s findings are also discussed, as well as directions for future research.

Microcantilever sensors for biochemical detection and analysis

Biochemical agents, including bacteria and toxins, are potentially dangerous and responsible for a wide variety of diseases. Reliable detection and characterization of small samples is necessary in order to reduce and eliminate their harmful consequences. Microcantilever sensors offer a potential alternative to the state of the art due to their small size, fast response time, and the ability to operate in air and liquid environments. At present, there are several technology limitations that inhibit application of microcantilever to biochemical detection and analysis, including difficulties in conducting temperature-sensitive experiments, material inadequacy resulting in insufficient cell capture, and poor selectivity of multiple analytes. This work aims to address several of these issues by introducing microcantilevers having integrated thermal functionality and by introducing nanocrystalline diamond as new material for microcantilevers. Microcantilevers are designed, fabricated, characterized, and used for capture and detection of cells and bacteria. The first microcantilever type described in this work is a silicon cantilever having highly uniform in-plane temperature distribution. The goal is to have 100 μm square uniformly heated area that can be used for thermal characterization of films as well as to conduct chemical reactions with small amounts of material. Fabricated cantilevers can reach above 300C while maintaining temperature uniformity of 2−4%. This is an improvement of over one order of magnitude over currently available cantilevers. The second microcantilever type is a doped single crystal silicon cantilever having a thin coating of ultrananocrystalline diamond (UNCD). The primary application of such a device is in biological testing, where diamond acts as a stable, electrically isolated reaction surface while silicon layer provides controlled heating with minimum variations in temperature. This work shows that composite cantilevers of this kind are an effective platform for temperature-sensitive biological experiments, such as heat lysing and polymerase chain reaction. The rapid heat-transfer of Si-UNCD cantilever compromised the membrane of NIH 3T3 fibroblast and lysed the cell nucleus within 30 seconds. Bacteria cells, Listeria monocytogenes V7, were shown to be captured with biotinylated heat-shock protein on UNCD surface and 90% of all viable cells exhibit membrane porosity due to high heat in 15 seconds. Lastly, a sensor made solely from UNCD diamond is fabricated with the intention of being used to detect the presence of biological species by means of an integrated piezoresistor or through frequency change monitoring. Since UNCD diamond has not been previously used in piezoresistive applications, temperature-denpendent piezoresistive coefficients and gage factors are determined first. The doped UNCD exhibits a significant piezoresistive effect with gauge factor of 7.53±0.32 and a piezoresistive coefficient of 8.12×10^−12 Pa^−1 at room temperature. The piezoresistive properties of UNCD are constant over the temperature range of 25−200C. 300 μm long cantilevers have the highest sensitivity of 0.186 m-Ohm/Ohm per μm of cantilever end deflection, which is approximately half that of similarly sized silicon cantilevers. UNCD cantilever arrays were fabricated consisting of four sixteen-cantilever arrays of length 20–90 μm in addition to an eight-cantilever array of length 120 μm. Laser doppler vibrometry (LDV) measured the cantilever resonant frequency, which ranged as 218 kHz−5.14 MHz in air and 73 kHz−3.68 MHz in water. The quality factor of the cantilever was 47−151 in air and 18−45 in water. The ability to measure frequencies of the cantilever arrays opens the possibility for detection of individual bacteria by monitoring frequency shift after cell capture.

Les étrangers aux frontières de la France : étude de récits de migration (1870 à nos jours)

In this dissertation, I examine how migration narratives make an ambiguous contribution to the democratization of French national borders. National borders are essentially spaces of crises from which it is possible to study the constant evolution of national identity. Migration narratives, regardless of their ideological dimension, offer representations of the border and of the foreigner that result from a tension between the difficulty to think identity outside of the national frame and the questioning of such a strong tie between identity and the nation. At the border, identities are fundamentally unstable. The first part is focused on the north-eastern and the southern borders of France at the end of the 19th century. The French nationalist literature at the time, advocating for the return of Alsace-Lorraine to the Republic, is characterized by a tension between nationalism and regionalism. The ideology of latinity constitutes a second major feature of the discourse on French identity. Developed by Louis Bertrand, it claims that France can only be regenerated in Algeria. However, a gap between his fictional works and his essays reveals latinity as hybrid and heterogeneous. Borders are also polysemic, namely, they do have the same meaning for everyone. The second part of the dissertation focuses on the southern border of France from the 30s to the 90s. The study of films and novels demonstrate that former borders are still active, especially colonial borders. Finally, the third part of the dissertation addresses the representation of migrants who were trapped in the north of France, at the border of the Schengen area, from the 90s to 2009. Migration narratives bring attention to the totalitarian tendencies of the state, but they also struggle with the contradictions of the humanitarian discourse and the analogies made with previous immigration waves.