Teacher Education, School Effectiveness and Improvement : A Study of Academic and Professional Qualification on Teachers' Job Effectiveness in Nigerian Secondary Schools

This academic work begins with a compact presentation of the general background to the study, which also includes an autobiography for the interest in this research. The presentation provides readers who know little of the topic of this research and of the structure of the educational system as well as of the value given to education in Nigeria. It further concentrates on the dynamic interplay of the effect of academic and professional qualification and teachers' job effectiveness in secondary schools in Nigeria in particular, and in Africa in general. The aim of this study is to produce a systematic analysis and rich theoretical and empirical description of teachers' teaching competencies. The theoretical part comprises a comprehensive literature review that focuses on research conducted in the areas of academic and professional qualification and teachers' job effectiveness, teaching competencies, and the role of teacher education with particular emphasis on school effectiveness and improvement. This research benefits greatly from the functionalist conception of education, which is built upon two emphases: the application of the scientific method to the objective social world, and the use of an analogy between the individual 'organism' and 'society'. To this end, it offers us an opportunity to define terms systematically and to view problems as always being interrelated with other components of society. The empirical part involves describing and interpreting what educational objectives can be achieved with the help of teachers' teaching competencies in close connection to educational planning, teacher training and development, and achieving them without waste. The data used in this study were collected between 2002 and 2003 from teachers, principals, supervisors of education from the Ministry of Education and Post Primary Schools Board in the Rivers State of Nigeria (N=300). The data were collected from interviews, documents, observation, and questionnaires and were analyzed using both qualitative and quantitative methods to strengthen the validity of the findings. The data collected were analyzed to answer the specific research questions and hypotheses posited in this study. The data analysis involved the use of multiple statistical procedures: Percentages Mean Point Value, T-test of Significance, One-Way Analysis of Variance (ANOVA), and Cross Tabulation. The results obtained from the data analysis show that teachers require professional knowledge and professional teaching skills, as well as a broad base of general knowledge (e.g., morality, service, cultural capital, institutional survey). Above all, in order to carry out instructional processes effectively, teachers should be both academically and professionally trained. This study revealed that teachers are not however expected to have an extraordinary memory, but rather looked upon as persons capable of thinking in the right direction. This study may provide a solution to the problem of teacher education and school effectiveness in Nigeria. For this reason, I offer this treatise to anyone seriously committed in improving schools in developing countries in general and in Nigeria in particular to improve the lives of all its citizens. In particular, I write this to encourage educational planners, education policy makers, curriculum developers, principals, teachers, and students of education interested in empirical information and methods to conceptualize the issue this study has raised and to provide them with useful suggestions to help them improve secondary schooling in Nigeria. Though, multiple audiences exist for any text. For this reason, I trust that the academic community will find this piece of work a useful addition to the existing literature on school effectiveness and school improvement. Through integrating concepts from a number of disciplines, I aim to describe as holistic a representation as space could allow of the components of school effectiveness and quality improvement. A new perspective on teachers' professional competencies, which not only take into consideration the unique characteristics of the variables used in this study, but also recommend their environmental and cultural derivation. In addition, researchers should focus their attention on the ways in which both professional and non-professional teachers construct and apply their methodological competencies, such as their grouping procedures and behaviors to the schooling of students. Keywords: Professional Training, Academic Training, Professionally Qualified, Academically Qualified, Professional Qualification, Academic Qualification, Job Effectiveness, Job Efficiency, Educational Planning, Teacher Training and Development, Nigeria.

High-quality polar UV measurements : scientific analyses and transfer of the irradiance scale

The Earth's ecosystems are protected from the dangerous part of the solar ultraviolet (UV) radiation by stratospheric ozone, which absorbs most of the harmful UV wavelengths. Severe depletion of stratospheric ozone has been observed in the Antarctic region, and to a lesser extent in the Arctic and midlatitudes. Concern about the effects of increasing UV radiation on human beings and the natural environment has led to ground based monitoring of UV radiation. In order to achieve high-quality UV time series for scientific analyses, proper quality control (QC) and quality assurance (QA) procedures have to be followed. In this work, practices of QC and QA are developed for Brewer spectroradiometers and NILU-UV multifilter radiometers, which measure in the Arctic and Antarctic regions, respectively. These practices are applicable to other UV instruments as well. The spectral features and the effect of different factors affecting UV radiation were studied for the spectral UV time series at Sodankylä. The QA of the Finnish Meteorological Institute's (FMI) two Brewer spectroradiometers included daily maintenance, laboratory characterizations, the calculation of long-term spectral responsivity, data processing and quality assessment. New methods for the cosine correction, the temperature correction and the calculation of long-term changes of spectral responsivity were developed. Reconstructed UV irradiances were used as a QA tool for spectroradiometer data. The actual cosine correction factor was found to vary between 1.08-1.12 and 1.08-1.13. The temperature characterization showed a linear temperature dependence between the instrument's internal temperature and the photon counts per cycle. Both Brewers have participated in international spectroradiometer comparisons and have shown good stability. The differences between the Brewers and the portable reference spectroradiometer QASUME have been within 5% during 2002-2010. The features of the spectral UV radiation time series at Sodankylä were analysed for the time period 1990-2001. No statistically significant long-term changes in UV irradiances were found, and the results were strongly dependent on the time period studied. Ozone was the dominant factor affecting UV radiation during the springtime, whereas clouds played a more important role during the summertime. During this work, the Antarctic NILU-UV multifilter radiometer network was established by the Instituto Nacional de Meteorogía (INM) as a joint Spanish-Argentinian-Finnish cooperation project. As part of this work, the QC/QA practices of the network were developed. They included training of the operators, daily maintenance, regular lamp tests and solar comparisons with the travelling reference instrument. Drifts of up to 35% in the sensitivity of the channels of the NILU-UV multifilter radiometers were found during the first four years of operation. This work emphasized the importance of proper QC/QA, including regular lamp tests, for the multifilter radiometers also. The effect of the drifts were corrected by a method scaling the site NILU-UV channels to those of the travelling reference NILU-UV. After correction, the mean ratios of erythemally-weighted UV dose rates measured during solar comparisons between the reference NILU-UV and the site NILU-UVs were 1.007±0.011 and 1.012±0.012 for Ushuaia and Marambio, respectively, when the solar zenith angle varied up to 80°. Solar comparisons between the NILU-UVs and spectroradiometers showed a ±5% difference near local noon time, which can be seen as proof of successful QC/QA procedures and transfer of irradiance scales. This work also showed that UV measurements made in the Arctic and Antarctic can be comparable with each other.

Open Access to the Scientific Journal Literature: Situation 2009

Background: The Internet has recently made possible the free global availability of scientific journal articles. Open Access (OA) can occur either via OA scientific journals, or via authors posting manuscripts of articles published in subscription journals in open web repositories. So far there have been few systematic studies showing how big the extent of OA is, in particular studies covering all fields of science. Methodology/Principal Findings: The proportion of peer reviewed scholarly journal articles, which are available openly in full text on the web, was studied using a random sample of 1837 titles and a web search engine. Of articles published in 2008, 8,5% were freely available at the publishers’ sites. For an additional 11,9% free manuscript versions could be found using search engines, making the overall OA percentage 20,4%. Chemistry (13%) had the lowest overall share of OA, Earth Sciences (33%) the highest. In medicine, biochemistry and chemistry publishing in OA journals was more common. In all other fields author-posted manuscript copies dominated the picture. Conclusions/Significance: The results show that OA already has a significant positive impact on the availability of the scientific journal literature and that there are big differences between scientific disciplines in the uptake. Due to the lack of awareness of OA-publishing among scientists in most fields outside physics, the results should be of general interest to all scholars. The results should also interest academic publishers, who need to take into account OA in their business strategies and copyright policies, as well as research funders, who like the NIH are starting to require OA availability of results from research projects they fund. The method and search tools developed also offer a good basis for more in-depth studies as well as longitudinal studies.

Benchmarking Scientific Journals from the Submitting Author’s Viewpoint

Authors of scholarly papers to a large extent base the decision on where to submit their manuscripts on the prestige of journals, taking little account of other possible factors. Information concerning such factors is in fact often not available. This paper argues for the establishment of methods for benchmarking scientific journals, taking into account a wider range of journal performance parameters than is currently available. A model for how prospective authors determine the value of submitting to a particular journal is presented. The model includes eight factors that influence an author’s decision and 21 other underlying factors. The model is a qualitative one. The method proposes to benchmark groups of journals by application of the factors. Initial testing of the method has been undertaken in one discipline.

A Method for Comparing Scholarly Journals as Service Providers to Authors

When authors of scholarly articles decide where to submit their manuscripts for peer review and eventual publication, they often base their choice of journals on very incomplete information abouthow well the journals serve the authors’ purposes of informing about their research and advancing their academic careers. The purpose of this study was to develop and test a new method for benchmarking scientific journals, providing more information to prospective authors. The method estimates a number of journal parameters, including readership, scientific prestige, time from submission to publication, acceptance rate and service provided by the journal during the review and publication process. Data directly obtainable from the web, data that can be calculated from such data, data obtained from publishers and editors, and data obtained using surveys with authors are used in the method, which has been tested on three different sets of journals, each from a different discipline. We found a number of problems with the different data acquisition methods, which limit the extent to which the method can be used. Publishers and editors are reluctant to disclose important information they have at hand (i.e. journal circulation, web downloads, acceptance rate). The calculation of some important parameters (for instance average time from submission to publication, regional spread of authorship) can be done but requires quite a lot of work. It can be difficult to get reasonable response rates to surveys with authors. All in all we believe that the method we propose, taking a “service to authors” perspective as a basis for benchmarking scientific journals, is useful and can provide information that is valuable to prospective authors in selected scientific disciplines.

Scientific Journal Publishing – Yearly Volume and Open Access Availability

Introduction. We estimate the total yearly volume of peer-reviewed scientific journal articles published world-wide as well as the share of these articles available openly on the Web either directly or as copies in e-print repositories. Method. We rely on data from two commercial databases (ISI and Ulrich's Periodicals Directory) supplemented by sampling and Google searches. Analysis. A central issue is the finding that ISI-indexed journals publish far more articles per year (111) than non ISI-indexed journals (26), which means that the total figure we obtain is much lower than many earlier estimates. Our method of analysing the number of repository copies (green open access) differs from several earlier studies which have studied the number of copies in identified repositories, since we start from a random sample of articles and then test if copies can be found by a Web search engine. Results. We estimate that in 2006 the total number of articles published was approximately 1,350,000. Of this number 4.6% became immediately openly available and an additional 3.5% after an embargo period of, typically, one year. Furthermore, usable copies of 11.3% could be found in subject-specific or institutional repositories or on the home pages of the authors. Conclusions. We believe our results are the most reliable so far published and, therefore, should be useful in the on-going debate about Open Access among both academics and science policy makers. The method is replicable and also lends itself to longitudinal studies in the future.

How do Researchers Find and Retrieve Scientific Publications – A Case study of the Impact of the Internet on the Construction IT and Construction Management Research Communities

The World Wide Web provides the opportunity for a radically changed and much more efficient communication process for scientific results. A survey in the closely related domains of construction information technology and construction management was conducted in February 2000, aimed at measuring to what extent these opportunities are already changing the scientific information exchange and how researchers feel about the changes. The paper presents the results based on 236 replies to an extensive Web based questionnaire. 65% of the respondents stated their primary research interest as IT in A/E/C and 20% as construction management and economics. The questions dealt with how researchers find, access and read different sources; how much and what publications they read; how often and to which conferences they travel; how much they publish, and what are the criteria for where they eventually decide to publish. Some of the questions confronted traditional and electronic publishing with one final section dedicated to opinions about electronic publishing. According to the survey researchers already download half of the material that they read digitally from the Web. The most popular method for retrieving an interesting publication is downloading it for free from the author’s or publisher’s website. Researchers are not particularly willing to pay for electronic scientific publications. There is much support for a scenario of electronic journals available totally freely on the Web, where the costs could be covered by for instance professional societies or the publishing university. The shift that the Web is causing seems to be towards the "just in time" reading of literature. Also, frequent users of the Web rely less on scientific publications and tend to read fewer articles. If available with little effort, papers published in traditional journals are preferred; if not, the papers should be on the Web. In these circumstances, the role of paper-based journals published by established publishers is shifting from the core "information exchange" to the building of authors' prestige. The respondents feel they should build up their reputations by publishing in journals and relevant conferences, but then make their work freely available on the Web.

Process Analytical Technology Approach on Fluid Bed Granulation and Drying : Identifying Critical Relationships and Constructing the Design Space

Fluid bed granulation is a key pharmaceutical process which improves many of the powder properties for tablet compression. Dry mixing, wetting and drying phases are included in the fluid bed granulation process. Granules of high quality can be obtained by understanding and controlling the critical process parameters by timely measurements. Physical process measurements and particle size data of a fluid bed granulator that are analysed in an integrated manner are included in process analytical technologies (PAT). Recent regulatory guidelines strongly encourage the pharmaceutical industry to apply scientific and risk management approaches to the development of a product and its manufacturing process. The aim of this study was to utilise PAT tools to increase the process understanding of fluid bed granulation and drying. Inlet air humidity levels and granulation liquid feed affect powder moisture during fluid bed granulation. Moisture influences on many process, granule and tablet qualities. The approach in this thesis was to identify sources of variation that are mainly related to moisture. The aim was to determine correlations and relationships, and utilise the PAT and design space concepts for the fluid bed granulation and drying. Monitoring the material behaviour in a fluidised bed has traditionally relied on the observational ability and experience of an operator. There has been a lack of good criteria for characterising material behaviour during spraying and drying phases, even though the entire performance of a process and end product quality are dependent on it. The granules were produced in an instrumented bench-scale Glatt WSG5 fluid bed granulator. The effect of inlet air humidity and granulation liquid feed on the temperature measurements at different locations of a fluid bed granulator system were determined. This revealed dynamic changes in the measurements and enabled finding the most optimal sites for process control. The moisture originating from the granulation liquid and inlet air affected the temperature of the mass and pressure difference over granules. Moreover, the effects of inlet air humidity and granulation liquid feed rate on granule size were evaluated and compensatory techniques used to optimize particle size. Various end-point indication techniques of drying were compared. The ∆T method, which is based on thermodynamic principles, eliminated the effects of humidity variations and resulted in the most precise estimation of the drying end-point. The influence of fluidisation behaviour on drying end-point detection was determined. The feasibility of the ∆T method and thus the similarities of end-point moisture contents were found to be dependent on the variation in fluidisation between manufacturing batches. A novel parameter that describes behaviour of material in a fluid bed was developed. Flow rate of the process air and turbine fan speed were used to calculate this parameter and it was compared to the fluidisation behaviour and the particle size results. The design space process trajectories for smooth fluidisation based on the fluidisation parameters were determined. With this design space it is possible to avoid excessive fluidisation and improper fluidisation and bed collapse. Furthermore, various process phenomena and failure modes were observed with the in-line particle size analyser. Both rapid increase and a decrease in granule size could be monitored in a timely manner. The fluidisation parameter and the pressure difference over filters were also discovered to express particle size when the granules had been formed. The various physical parameters evaluated in this thesis give valuable information of fluid bed process performance and increase the process understanding.

Ufologia ja ufokokemukset uskonnollisina ilmiönä : Teoreettinen tutkimus

The main question of my doctoral thesis is whether ufology and UFO experiences are or can be explained as religious phenomena. My research is theoretical in the sense that I combine and systematise cultural scientific knowledge concerning the religiosity of ufology and UFO experiences and complete this theoretical effort with empirical subject matter. The research material for my study consists of theoretical literature and empirical texts written by ufologists and those who have had UFO experiences. I defined the material in a way that it became full and extensive with regard to ufology, stories about UFO experiences and the cultural scientific literature concerning them. In addition, I present a source criticism for the literature because it is in part informal. The method is analysing and synthesising the material in the context of spiral of hermeneutic inferential process. Definitions of religion, ufology and UFO experience, developed by myself, serve as guide lines for the process. The conclusions of my research are as follows. For the most part, ufology and UFO experiences belong to the category of religion and only a fraction of these instances can be explained as something else, for example psychiatric phenomena. From the religious viewpoint I explain ufology and UFO experiences on four different but interlinked levels: historical, comparative, sociological and psychological. Historically ufology and UFO experiences include esoteristic, Christian and folk religious elements. In addition UFO experiences have significant similarities with folk religious stories and shamanistic experiences. From the perspective of the sociology, of religion ufology and UFO experiences can be analysed as products of our scientific and technological Western culture. Social crisis and social psychological group mechanisms affect the appearance of ufological ideas and UFO experiences. Psychologically, in the background of religious UFO experiences there can be found several factors, such as wishful thinking. Concerning UFO sightings these are misinterpretations of certain ordinary and some rare or exotic natural and technical phenomena. Intense UFO experiences, such as UFO abductions, are stimulated for the most part by hallucinations, sleep paralysis disorders, lively fantasies (in case of fantasy prone personalities) and false memories. In group cases social pressure, small group delusion and the guilt of exposing the true nature of a story come into play. A UFO experience can be traumatising because of certain inferential mechanisms and cognitive dissonance involved in the process of conversion as a UFO experiencer. UFO religiosity is a cross cultural, widespread and a significant field of phenomena, which can offer insight about religious developments in the future. However, UFO religiosity has not been studied extensively. This research is one effort to address this lack of documentation. The motivation behind my thesis was to make ufology and UFO experiences more understandable.

Language change as an evolutionary process

In the thesis it is discussed in what ways concepts and methodology developed in evolutionary biology can be applied to the explanation and research of language change. The parallel nature of the mechanisms of biological evolution and language change is explored along with the history of the exchange of ideas between these two disciplines. Against this background computational methods developed in evolutionary biology are taken into consideration in terms of their applicability to the study of historical relationships between languages. Different phylogenetic methods are explained in common terminology, avoiding the technical language of statistics. The thesis is on one hand a synthesis of earlier scientific discussion, and on the other an attempt to map out the problems of earlier approaches in addition to finding new guidelines in the study of language change on their basis. Primarily literature about the connections between evolutionary biology and language change, along with research articles describing applications of phylogenetic methods into language change have been used as source material. The thesis starts out by describing the initial development of the disciplines of evolutionary biology and historical linguistics, a process which right from the beginning can be seen to have involved an exchange of ideas concerning the mechanisms of language change and biological evolution. The historical discussion lays the foundation for the handling of the generalised account of selection developed during the recent few decades. This account is aimed for creating a theoretical framework capable of explaining both biological evolution and cultural change as selection processes acting on self-replicating entities. This thesis focusses on the capacity of the generalised account of selection to describe language change as a process of this kind. In biology, the mechanisms of evolution are seen to form populations of genetically related organisms through time. One of the central questions explored in this thesis is whether selection theory makes it possible to picture languages are forming populations of a similar kind, and what a perspective like this can offer to the understanding of language in general. In historical linguistics, the comparative method and other, complementing methods have been traditionally used to study the development of languages from a common ancestral language. Computational, quantitative methods have not become widely used as part of the central methodology of historical linguistics. After the fading of a limited popularity enjoyed by the lexicostatistical method since the 1950s, only in the recent years have also the computational methods of phylogenetic inference used in evolutionary biology been applied to the study of early language history. In this thesis the possibilities offered by the traditional methodology of historical linguistics and the new phylogenetic methods are compared. The methods are approached through the ways in which they have been applied to the Indo-European languages, which is the most thoroughly investigated language family using both the traditional and the phylogenetic methods. The problems of these applications along with the optimal form of the linguistic data used in these methods are explored in the thesis. The mechanisms of biological evolution are seen in the thesis as parallel in a limited sense to the mechanisms of language change, however sufficiently so that the development of a generalised account of selection is deemed as possibly fruiful for understanding language change. These similarities are also seen to support the validity of using phylogenetic methods in the study of language history, although the use of linguistic data and the models of language change employed by these models are seen to await further development.

Rikollisia sattumalta? : Naisten keskinäistä haureutta koskevat oikeudenkäynnit 1950-luvun Itä-Suomessa

The main focus of the research is on the genealogy of women's same-sex fornication in Finnish criminal law from 1889/1894 to 1971. Why were women included in the concept of same-sex fornication in Finland and why, where, and when was the law put into effect? Which women were tried, how did the trial proceedings evolve, and what kind of effects did the trials have afterwards? Which concepts were used? These questions have been approached through the analysis of the Finnish Penal Code, the criminal law science and four trial proceedings in Eastern Finland during the 1950s. The research draws on the epistemology of the closet and the concept of heteronormativity adapted from queer theories. It is method critical in utilising ethnography, micro history and feminist ethical self-reflection. The research consists of six scientific refereed articles (see appendix) and of a theoretical introduction. The main results of the research are: 1) The genealogy of Finnish decency [Sittlichkeit] can not be researched without oral histories, due to the late modernisation of Finnish society and the legal system, which does not follow the pattern of English, French and German societies. 2) The inclusion of women's same-sex fornication in the Finnish Penal Code is not incomprehensible when compared to the early modern European legislations and court practices. Women have been punished for the sins of Sodom, though not directly under the 1734 Swedish law. 3) Fornication and decency were ambivalent concepts in the 1889/1894 law, and juridical authorities offered controversial interpretations of them during the late 19th and early 20th centuries. 4) A peak in women's convictions occurred in the 1950s, and most of the trial proceedings took place in rural Eastern Finland. Neither the state nor the police were active in prosecuting; instead, the trial proceedings began "by accident". 5) From 1940 to 1960 police training lacked instructions concerning the interrogation of women suspected of same-sex fornication. 6) The figure of the penitent woman was produced in the chiasmic encounter of confession and police interrogation which moulded and was moulded by the epistemological matrix of shame, honour, and decency. Women's speech acts were judicialised as confessions which enabled the disciplinary tampering with the women's bodies. 7) Gender and personality, more than sexuality, or "criminality" defined the status of the convicted women in their village communities after the trials. 8) Relations between police training, sexuality, and decency have not been well researched in Finland. 9) Decriminalisation in 1971 did not mark the end of homophobic legal discourse, even though the 1999 reform of sexual crimes took the form of gender neutral conceptualisation

Questions to Artificial Nature: A Philosophical Study of Interdisciplinary Models and their Functions in Scientific Practice

This thesis presents an interdisciplinary analysis of how models and simulations function in the production of scientific knowledge. The work is informed by three scholarly traditions: studies on models and simulations in philosophy of science, so-called micro-sociological laboratory studies within science and technology studies, and cultural-historical activity theory. Methodologically, I adopt a naturalist epistemology and combine philosophical analysis with a qualitative, empirical case study of infectious-disease modelling. This study has a dual perspective throughout the analysis: it specifies the modelling practices and examines the models as objects of research. The research questions addressed in this study are: 1) How are models constructed and what functions do they have in the production of scientific knowledge? 2) What is interdisciplinarity in model construction? 3) How do models become a general research tool and why is this process problematic? The core argument is that the mediating models as investigative instruments (cf. Morgan and Morrison 1999) take questions as a starting point, and hence their construction is intentionally guided. This argument applies the interrogative model of inquiry (e.g., Sintonen 2005; Hintikka 1981), which conceives of all knowledge acquisition as process of seeking answers to questions. The first question addresses simulation models as Artificial Nature, which is manipulated in order to answer questions that initiated the model building. This account develops further the "epistemology of simulation" (cf. Winsberg 2003) by showing the interrelatedness of researchers and their objects in the process of modelling. The second question clarifies why interdisciplinary research collaboration is demanding and difficult to maintain. The nature of the impediments to disciplinary interaction are examined by introducing the idea of object-oriented interdisciplinarity, which provides an analytical framework to study the changes in the degree of interdisciplinarity, the tools and research practices developed to support the collaboration, and the mode of collaboration in relation to the historically mutable object of research. As my interest is in the models as interdisciplinary objects, the third research problem seeks to answer my question of how we might characterise these objects, what is typical for them, and what kind of changes happen in the process of modelling. Here I examine the tension between specified, question-oriented models and more general models, and suggest that the specified models form a group of their own. I call these Tailor-made models, in opposition to the process of building a simulation platform that aims at generalisability and utility for health-policy. This tension also underlines the challenge of applying research results (or methods and tools) to discuss and solve problems in decision-making processes.

Stone Weathering in the Monastic Building Complex on Mountain of St Aaron in Petra, Jordan.

Since 1997 the Finnish Jabal Haroun Project (FJHP) has studied the ruins of the monastery and pilgrimage complex (Gr. oikos) of Aaron located on a plateau of the Mountain of Prophet Aaron, Jabal an-Nabi Harûn, ca. 5 km to the south-west of the UNESCO World Heritage site of Petra in Jordan. The state of conservation and the damaging processes affecting the stone structures of the site are studied in this M.A. thesis. The chapel was chosen as an example, as it represents the phasing and building materials of the entire site. The aim of this work is to act as a preliminary study with regards to the planning of long-term conservation at the site. The research is empirical in nature. The condition of the stones in the chapel walls was mapped using the Illustrated Glossary on Stone Deterioration, by the ICOMOS International Scientific Committee for Stone. This glossary combines several standards and systems of damage mapping used in the field. Climatic conditions (temperature and RH %) were monitored for one year (9/2005-8/2006) using a HOBO Microstation datalogger. The measurements were compared with contemporary measurements from the nearest weather station in Wadi Musa. Salts in the stones were studied by taking samples from the stone surfaces by scraping and with the “Paper Pulp”-method; with a poultice of wet cellulose fiber (Arbocel BC1000) and analyzing what main types of salts were to be found in the samples. The climatic conditions on the mountain were expected to be rapidly changing and to differ clearly from conditions in the neighboring areas. The rapid changes were confirmed, but the values did not differ as much as expected from those nearby: the 12 months monitored had average temperatures and were somewhat drier than average. Earlier research in the area has shown that the geological properties of the stone material influence its deterioration. The damage mapping showed clearly, that salts are also a major reason for stone weathering. The salt samples contained several salt combinations, whose behavior in the extremely unstable climatic conditions is difficult to predict. Detailed mapping and regular monitoring of especially the structures, that are going remain exposed, is recommended in this work.