The structure of Norway spruce (Picea abies [L.] Karst.) stems in relation to wood properties of sawn timber

An important challenge in forest industry is to get the appropriate raw material out from the forests to the wood processing industry. Growth and stem reconstruction simulators are therefore increasingly integrated in industrial conversion simulators, for linking the properties of wooden products to the three-dimensional structure of stems and their growing conditions. Static simulators predict the wood properties from stem dimensions at the end of a growth simulation period, whereas in dynamic approaches, the structural components, e.g. branches, are incremented along with the growth processes. The dynamic approach can be applied to stem reconstruction by predicting the three-dimensional stem structure from external tree variables (i.e. age, height) as a result of growth to the current state. In this study, a dynamic growth simulator, PipeQual, and a stem reconstruction simulator, RetroSTEM, are adapted to Norway spruce (Picea abies [L.] Karst.) to predict the three-dimensional structure of stems (tapers, branchiness, wood basic density) over time such that both simulators can be integrated in a sawing simulator. The parameterisation of the PipeQual and RetroSTEM simulators for Norway spruce relied on the theoretically based description of tree structure developing in the growth process and following certain conservative structural regularities while allowing for plasticity in the crown development. The crown expressed both regularity and plasticity in its development, as the vertical foliage density peaked regularly at about 5 m from the stem apex, varying below that with tree age and dominance position (Study I). Conservative stem structure was characterized in terms of (1) the pipe ratios between foliage mass and branch and stem cross-sectional areas at crown base, (2) the allometric relationship between foliage mass and crown length, (3) mean branch length relative to crown length and (4) form coefficients in branches and stem (Study II). The pipe ratio between branch and stem cross-sectional area at crown base, and mean branch length relative to the crown length may differ in trees before and after canopy closure, but the variation should be further analysed in stands of different ages and densities with varying site fertilities and climates. The predictions of the PipeQual and RetroSTEM simulators were evaluated by comparing the simulated values to measured ones (Study III, IV). Both simulators predicted stem taper and branch diameter at the individual tree level with a small bias. RetroSTEM predictions of wood density were accurate. For focusing on even more accurate predictions of stem diameters and branchiness along the stem, both simulators should be further improved by revising the following aspects in the simulators: the relationship between foliage and stem sapwood area in the upper stem, the error source in branch sizes, the crown base development and the height growth models in RetroSTEM. In Study V, the RetroSTEM simulator was integrated in the InnoSIM sawing simulator, and according to the pilot simulations, this turned out to be an efficient tool for readily producing stand scale information about stem sizes and structure when approximating the available assortments of wood products.

Effects of management and landscape structure on biodiversity in boreal agricultural farmland

Intensified agricultural practises introduced after the Second World War are identified as a major cause of global biodiversity declines. In several European countries agri-environment support schemes have been introduced to counteract the ongoing biodiversity declines. Farmers participating in agri-environment schemes are financially compensated for decreasing the intensity of farming practises leading to smaller yields and lower income. The Finnish agri-environment support scheme is composed of a set of measures, such as widened field margins along main ditches (obligatory measure), management of features increasing landscape diversity, management of semi-natural grasslands, and organic farming (special agreement measures). The magnitude of the benefits for biodiversity depends on landscape context and the properties of individual schemes. In this thesis I studied whether one agri-environment scheme, organic farming, is beneficial for species diversity and abundance of diurnal lepidopterans, bumblebees, carabid beetles and arable weeds. I found that organic farming did not enhance species richness of selected insect taxa, although bumblebee species richness tended to be higher in organic farms. Abundance of lepidopterans and bumblebees was not enhanced by organic farming, but carabid beetle abundance was higher in mixed farms with both cereal crop production and animal husbandry. Both species richness and abundance of arable weeds were higher in organic farms. My second objective was to study how landscape structure shapes farmland butterfly communities. I found that the percentage of habitat specialists and species with poor dispersal abilities in butterfly assemblages decreased with increasing arable field cover, leading to a dramatic decrease in butterfly beta diversity. In field boundaries local species richness of butterflies was linearly related to landscape species richness in geographic regions with high arable field cover, indicating that butterfly species richness in field boundaries is more limited by landscape factors than local habitat factors. In study landscapes containing semi-natural grasslands the relationship decelerated at high landscape species richness, suggesting that local species richness of butterflies in field boundaries is limited by habitat factors (demanding habitat specialists that occurred in semi-natural grasslands were absent in field margins). My results suggest that management options in field margins will affect mainly generalists, and species with good dispersal abilities, in landscapes with high arable field cover. Habitat specialists and species with poor dispersal abilities may benefit of management options if these are applied in the vicinity of source populations.

Yrittäjyyden arvottaminen akateemisten nuorten argumentoinnissa

Evaluation of entrepreneurship in the speech of academic students and newly qualified young academics a summary of a qualitative attitude study. In Finland very few university students plan to become entrepreneurs. The aim of this research was to examine entrepreneurial attitudes expressed in speech. The material was gathered from interviews with university students and newly qualified young academic adults. The interviewees commented on twelve different sentences with claims formulated using research literature and views that have appeared in public discussions. The interviewees were divided into three different groups based on their self-expressed entrepreneurial intentions. The method of qualitative attitude research (Vesala & Rantanen 1999, 2007) was used in the interviews. The research material was studied using two interpretative theories: (1) The planned behaviour theory (Ajzen 1985, 1991a, b), which makes it possible to focus on the separate elements (attitude towards an act, subjective norms and perceived feasibility) necessary for intentions to develop; and (2) The theory of the two images of entrepreneurship (Vesala 1996), where individualism and relationism can be seen as resources for evaluating entrepreneurship. The subject of the research was how university students and newly qualified young adults viewed entrepreneurship as a general phenomen and in relation to the academic world. A second focus was on the attitudes expressed toward entrepreneurial university education and the possibility of combining entrepreneurship and academic knowledge. Of interest were also questions such as whether academic studies, knowledge and the university itself are resources or barriers to entrepreneurial intentions and entrepreneurship whether university students received any support for their entrepreneurial ambitions from the university and their fellow academic students. The problems tackled by this research were thus the following: How was entrepreneurship seen, both as a general phenomen and in an academic context, when it was evaluated positively, negatively or neutrally by the interviewees? In what way was entrepreneurship constructed in the interviewees attitudes? How were entrepreneurship and the academic world related in the interviewees attitudes? What kind of role did the university as an academic context play in the interviewees attitudes for example were university education and academic knowledge seen as resources or barriers to their entrepreneurial intentions. Traditional attitude studies claim that attitudes are a stable property of an individual. In contrast, rhetorical social psychological and qualitative attitude studies emphasize the contextual and linguistic aspects of attitude, and they offered an alternative viewpoint for this research. The study was based on two general assumptions: attitudes have objects and are evaluative. Here attitude was defined as an evaluative interpresentation made towards an object; adopting an attitude is a contextual process in the sense that attitudes are always concerned with the action context of the persons presenting them. Entrepreneurship, both as a general phenomen and in an academic context, was specified as the object to which an attitude was taken. From a theoretical point of view, qualitative methods suited the general structure of this research well. In a particular, qualitative approach which emphasized contextual elements proved to be both empirically valid and useful for avoiding the problematic assumptions associated with traditional attitude study. The subject of the analysis was the argumentative speech produced by the interviewees. The results of the study show the subjects responses to three main ways of viewing entrepreneurships. The first was an individualistic, ideal image of entrepreneurship. This was mostly evaluated positively and gained wide approval especially among interviewees who included entrepreneurship among their employment choices. Entrepreneurship was seen as the decision to earn one s living independently. In this individualistic image of entrepreneurship, the social context was hardly ever mentioned. Elements which were seen to threaten this ideal image were evaluated negatively. When entrepreneurship was evaluated negatively using the individualistic image of entrepreneurship, it was mentioned that it forced one into a never ending cycle of work and uninterested duties. The relationistic image of entrepreneurship was used as a speech resource when the social context was constructed as an economic resource or a threat to the ideal image of entrepreneurship. In the second view, entrepreneurship was characteristically seen as being based on economics, which was seen as a threat to the ideal individualistic image of entrepreneurship. The risk of economic failure was seen as a limiting factor to entrepreneurial ambitions as it forced entrepreneurs to work around the clock. The third view concerned the relationship between entrepreneurship and the academic world. Entrepreneurship as an employment choice for university educated persons was evaluated as relevant, and thus positively, when university education was constructed as a resource for entrepreneurship - and irrelevant and thus negatively when it was construed as an obstacle, too wide, or when successful entrepreneurship was seen as being mostly based on an individual s personal characteristics. The interviewees with no entrepreneurial intentions expressed the view that academic education didn t provide the proper skills and knowledge for entrepreneurship. The interviewees also expressed interest in university entrepreneurship education, although none had experience on this. The interviewees emphasized the fact that the University didn t encourage them to consider entrepreneurship as a relevant employment choice. The assumption made by this study was that becoming an entrepreneur is a conscious decision, the environment may influence an individual s decisions on how to make a living as it tends to socialise people to act in accordance with cultural traditions. Keywords: Entrepreneurship, Attitudes towards entrepreneurship, Intentional behaviour, Entrepreneurial intention, University entrepreneurship education, Qualitative attitude research (Vesala & Rantanen 1999, 2007), Rhetorical social psychology (Billig 1986), The theory of entrepreneuship s two images: individualism and relationism (Vesala 1996 ), The planned behaviour theory (Ajzen 1985, 1991a, b)

Sarveiskalvon permeabiliteetin ennustaminen QSPR-mallin avulla

QSPR-malli kuvaa kvantitatiivista riippuvuutta muuttujien ja biologisen ominaisuuden välillä. Näin ollen QSPR mallit ovat käyttökelpoisia lääkekehityksen apuvälineitä. Kirjallisessa osassa kerrotaan sarveiskalvon, suoliston ja veriaivoesteen permeabiliteetin malleista. Useimmin käytettyjä muuttujia ovat yhdisteen rasvaliukoisuus, polaarinen pinta-ala, vetysidosten muodostuminen ja varaus. Myös yhdisteen koko vaikuttaa läpäisevyyteen, vaikka tutkimuksissa onkin erilaista tietoa tämän merkittävyydestä. Malliin vaikuttaa myös muiden kuin mallissa mukana olevien muuttujien suuruusluokka esimerkkinä Lipinskin ‖rule of 5‖ luokittelu. Tässä luokittelussa yhdisteen ominaisuus ei saa ylittää tiettyjä raja-arvoja. Muussa tapauksessa sen imeytyminen suun kautta otettuna todennäköisesti vaarantuu. Lisäksi kirjallisessa osassa tutustuttiin kuljetinproteiineihin ja niiden toimintaan silmän sarveiskalvossa, suolistossa ja veriaivoesteessä. Nykyisin on kehitetty erilaisia QSAR-malleja kuljetinproteiineille ennustamaan mahdollisten substraatittien tai inhibiittorien vuorovaikutuksia kuljetinproteiinin kanssa. Kokeellisen osan tarkoitus oli rakentaa in silico -malli sarveiskalvon passiiviselle permeabiliteetille. Työssä tehtiin QSPR-malli 54 yhdisteen ACDLabs-ohjelmalla laskettujen muuttujien arvojen avulla. Permeabiliteettikertoimien arvot saatiin kirjallisuudesta kanin sarveiskalvon läpäisevyystutkimuksista. Lopullisen mallin muuttujina käytettiin oktanoli-vesijakaantumiskerrointa (logD) pH:ssa 7,4 ja vetysidosatomien kokonaismäärää. Yhtälö oli muotoa log10(permeabiliteettikerroin) = -3,96791 - 0,177842Htotal + 0,311963logD(pH7,4). R2-korrelaatiokerroin oli 0,77 ja Q2-korrelaatiokerroin oli 0,75. Lopullisen mallin hyvyyttä arvioitiin 15 yhdisteen ulkoisella testijoukolla, jolloin ennustettua permeabiliteettia verrattiin kokeelliseen permeabiliteettiin. QSPR-malli arvioitiin myös farmakokineettisen simulaation avulla. Simulaatiossa laskettiin seitsemän yhdisteen kammionestepitoisuudet in vivo vakaassa tilassa käyttäen simulaatioissa QSPR mallilla ennustettuja permeabiliteettikertoimia. Lisäksi laskettiin sarveiskalvon imeytymisen nopeusvakio (Kc) 13 yhdisteelle farmakokineettisen simulaation avulla ja verrattiin tätä lopullisella mallilla ennustettuun permeabiliteettiin. Tulosten perusteella saatiin tilastollisesti hyvä QSPR-malli kuvaamaan sarveiskalvon passiivista permeabiliteettia, jolloin tätä mallia voidaan käyttää lääkekehityksen alkuvaiheessa. QSPR-malli ennusti permeabiliteettikertoimet hyvin, mikä nähtiin vertaamalla mallilla ennustettuja arvoja kokeellisiin tuloksiin. Lisäksi yhdisteiden kammionestepitoisuudet voitiin simuloida käyttäen apuna QSPR-mallilla ennustettuja permeabiliteettikertoimien arvoja.

The effect of structure on the dilute solution properties of branched polysaccharides studied with SEC and AsFlFFF

Cereal arabinoxylans, guar galactomannans, and dextrans produced by lactic acid bacteria(LAB) are a structurally diverse group of branched polysaccharides with nutritional and industrial functions. In this thesis, the effect of the chemical structure on the dilute solution properties of these polysaccharides was investigated using size-exclusion chromatography(SEC) and asymmetric flow field-flow fractionation (AsFlFFF) with multiple-detection. The chemical structures of arabinoxylans were determined, whereas galactomannan and dextran structures were studied in previous investigations. Characterization of arabinoxylans revealed differences in the chemical structures of cereal arabinoxylans. Although arabinoxylans from wheat, rye, and barley fiber contained similar amounts of arabinose side units, the substitution pattern of arabinoxylans from different cereals varied. Arabinoxylans from barley husks and commercial low-viscosity wheat arabinoxylan contained a lower number of arabinose side units. Structurally different dextrans were obtained from different LAB. The structural effects on the solution properties could be studied in detail by modifying pure wheat and rye arabinoxylans and guar galactomannan with specific enzymes. The solution characterization of arabinoxylans, enzymatically modified galactomannans, and dextrans revealed the presence of aggregates in aqueous polysaccharide solutions. In the case of arabinoxylans and dextrans, the comparison of molar mass data from aqueous and organic SEC analyses was essential in confirming aggregation, which could not be observed only from the peak or molar mass distribution shapes obtained with aqueous SEC. The AsFlFFF analyses gave further evidence of aggregation. Comparison of molar mass and intrinsic viscosity data of unmodified and partially debranched guar galactomannan, on the other hand, revealed the aggregation of native galactomannan. The arabinoxylan and galactomannan samples with low or enzymatically extensively decreased side unit content behaved similarly in aqueous solution: lower molar mass samples stayed in solution but formed large aggregates, whereas the water solubility of the higher-molar-mass samples decreased significantly. Due to the restricted solubility of galactomannans in organic solvents, only aqueous galactomannan solutions were studied. The SEC and AsFlFFF results differed for the wheat arabinoxylan and dextran samples. Column matrix effects and possible differences in the separation parameters are discussed, and a problem related to the non-established relationship between the separation parameters of the two separation techniques is highlighted. This thesis shows that complementary approaches in the solution characterization of chemically heterogeneous polysaccharides are needed to comprehensively investigate macromolecular behavior in solution. These results may also be valuable when characterizing other branched polysaccharides.