Effects of dietary phosphorus and calcium-to-phosphorus ratio on calcium and bone metabolism in healthy 20- to 43-year-old Finnish women

Dietary habits have changed during the past decades towards an increasing consumption of processed foods, which has notably increased not only total dietary phosphorus (P) intake, but also intake of P from phosphate additives. While the intake of calcium (Ca) in many Western countries remains below recommended levels (800 mg/d), the usual daily P intake in a typical Western diet exceeds by 2- to 3-fold the dietary guidelines (600 mg/d). The effects of high P intake in healthy humans have been investigated seldom. In this thesis healthy 20- to 43-year-old women were studied. In the first controlled study (n = 14), we examined the effects of P doses, and in a cross-sectional study (n = 147) the associations of habitual P intakes with Ca and bone metabolism. In this same cross-sectional study, we also investigated whether differences exist between dietary P originating from natural P sources and phosphate additives. The second controlled study (n = 12) investigated whether by increasing the Ca intake, the effects of a high P intake could be reduced. The associations of habitual dietary calcium-to-phosphorus ratios (Ca:P ratio) with Ca and bone metabolism were determined in a cross-sectional study design (n = 147). In the controlled study, the oral intake of P doses (495, 745, 1245 and 1995 mg/d) with a low Ca intake (250 mg/d) increased serum parathyroid hormone (S-PTH) concentration in a dose-dependent manner. In addition, the highest P dose decreased serum ionized calcium (S-iCa) concentration and bone formation and increased bone resorption. In the second controlled study with a dietary P intake of 1850 mg/d, by increasing the Ca intake from 480 mg/d to 1080 mg/d and then to 1680 mg/d, the S-PTH concentration decreased, the S-iCa concentration increased and bone resorption decreased dose-dependently. However, not even the highest Ca intake could counteract the effect of high dietary P on bone formation, as indicated by unchanged bone formation activity. In the cross-sectional studies, a higher habitual dietary P intake (>1650 mg/d) was associated with lower S-iCa and higher S-PTH concentrations. The consumption of phosphate additive-containing foods was associated with a higher S-PTH concentration. Moreover, habitual low dietary Ca:P ratios (≤0.50, molar ratio) were associated with higher S-PTH concentrations and 24-h urinary Ca excretions, suggesting that low dietary Ca:P ratios may interfere with homeostasis of Ca metabolism and increase bone resorption. In summary, excessive dietary P intake in healthy Finnish women seems to be detrimental to Ca and bone metabolism, especially when dietary Ca intake is low. The results indicate that by increasing dietary Ca intake to the recommended level, the negative effects of high P intake could be diminished, but not totally prevented. These findings imply that phosphate additives may be more harmful than natural P. Thus, reduction of an excessively high dietary P intake is also beneficial for healthy individuals.

Irradiation-mediated tailoring of carbon nanotubes

The ever-increasing demand for faster computers in various areas, ranging from entertaining electronics to computational science, is pushing the semiconductor industry towards its limits on decreasing the sizes of electronic devices based on conventional materials. According to the famous law by Gordon E. Moore, a co-founder of the world s largest semiconductor company Intel, the transistor sizes should decrease to the atomic level during the next few decades to maintain the present rate of increase in the computational power. As leakage currents become a problem for traditional silicon-based devices already at sizes in the nanometer scale, an approach other than further miniaturization is needed to accomplish the needs of the future electronics. A relatively recently proposed possibility for further progress in electronics is to replace silicon with carbon, another element from the same group in the periodic table. Carbon is an especially interesting material for nanometer-sized devices because it forms naturally different nanostructures. Furthermore, some of these structures have unique properties. The most widely suggested allotrope of carbon to be used for electronics is a tubular molecule having an atomic structure resembling that of graphite. These carbon nanotubes are popular both among scientists and in industry because of a wide list of exciting properties. For example, carbon nanotubes are electronically unique and have uncommonly high strength versus mass ratio, which have resulted in a multitude of proposed applications in several fields. In fact, due to some remaining difficulties regarding large-scale production of nanotube-based electronic devices, fields other than electronics have been faster to develop profitable nanotube applications. In this thesis, the possibility of using low-energy ion irradiation to ease the route towards nanotube applications is studied through atomistic simulations on different levels of theory. Specifically, molecular dynamic simulations with analytical interaction models are used to follow the irradiation process of nanotubes to introduce different impurity atoms into these structures, in order to gain control on their electronic character. Ion irradiation is shown to be a very efficient method to replace carbon atoms with boron or nitrogen impurities in single-walled nanotubes. Furthermore, potassium irradiation of multi-walled and fullerene-filled nanotubes is demonstrated to result in small potassium clusters in the hollow parts of these structures. Molecular dynamic simulations are further used to give an example on using irradiation to improve contacts between a nanotube and a silicon substrate. Methods based on the density-functional theory are used to gain insight on the defect structures inevitably created during the irradiation. Finally, a new simulation code utilizing the kinetic Monte Carlo method is introduced to follow the time evolution of irradiation-induced defects on carbon nanotubes on macroscopic time scales. Overall, the molecular dynamic simulations presented in this thesis show that ion irradiation is a promisingmethod for tailoring the nanotube properties in a controlled manner. The calculations made with density-functional-theory based methods indicate that it is energetically favorable for even relatively large defects to transform to keep the atomic configuration as close to the pristine nanotube as possible. The kinetic Monte Carlo studies reveal that elevated temperatures during the processing enhance the self-healing of nanotubes significantly, ensuring low defect concentrations after the treatment with energetic ions. Thereby, nanotubes can retain their desired properties also after the irradiation. Throughout the thesis, atomistic simulations combining different levels of theory are demonstrated to be an important tool for determining the optimal conditions for irradiation experiments, because the atomic-scale processes at short time scales are extremely difficult to study by any other means.

First Measurement of the Ratio of Branching Fractions B(Lambda_b to Lambda_c mu nu)/B(Lambda_b to Lambda_c pi)

The analysis uses data from an integrated luminosity of approximately 172 pb-1 of ppbar collisions at sqrt(s)=1.96 TeV, collected with the CDF II detector at the Fermilab Tevatron. The Lambda_b and B0 relative branching fractions are measured to be: B(Lambda_b to Lambda_c+ mu nu)/B(Lambda_b to Lambda_c+ pi) = 16.6 +- 3.0 (stat) +- 1.0 (syst) +2.6 -3.4 (PDG) +- 0.3 (EBR), B(B0 to D+ mu nu)/B(B0 to D+ pi) = 9.9 +- 1.0 (stat) +- 0.6 (syst) +- 0.4 (PDG) +- 0.5 (EBR), B(B0 to D*+ mu nu)/B(B0 to D*+ pi) = 16.5 +- 2.3 (stat) +- 0.6 (syst) +- 0.5 (PDG) +- 0.8 (EBR) This article also presents measurements of the branching fractions of four new Lambda_b semileptonic decays: Lambda_b to Lambda_c(2595)+ mu nu, Lambda_b to Lambda_c(2625)+ mu nu, Lambda_b to Sigma_c(2455)0 pi mu nu, Lambda_b to Sigma_c(2455)++ pi mu nu, relative to the branching fraction of the Lambda_b to Lambda_c mu nu decay. Finally, the transverse-momentum distribution of Lambda_b baryons produced in p-pbar collisions is measured and found to be significantly different from that of B0 mesons.

First observation of the decay Bs --> Ds K and measurement of the ratio of branching fractions Br(Bs --> DsK)/Br(Bs --> Ds pi)

A combined mass and particle identification fit is used to make the first observation of the decay Bs --> Ds K and measure the branching fraction of Bs --> Ds K relative to Bs --> Ds pi. This analysis uses 1.2 fb^-1 integrated luminosity of pbar-p collisions at sqrt(s) = 1.96 TeV collected with the CDF II detector at the Fermilab Tevatron collider. We observe a Bs --> Ds K signal with a statistical significance of 8.1 sigma and measure Br(Bs --> Ds K)/Br(Bs --> Ds pi) = 0.097 +- 0.018(stat) +- 0.009(sys).

Measurement of the Ratio σtt̅ /σZ/γ*→ll and Precise Extraction of the tt̅ Cross Section

We report a measurement of the ratio of the tt̅ to Z/γ* production cross sections in √s=1.96  TeV pp̅ collisions using data corresponding to an integrated luminosity of up to 4.6  fb-1, collected by the CDF II detector. The tt̅ cross section ratio is measured using two complementary methods, a b-jet tagging measurement and a topological approach. By multiplying the ratios by the well-known theoretical Z/γ*→ll cross section predicted by the standard model, the extracted tt̅ cross sections are effectively insensitive to the uncertainty on luminosity. A best linear unbiased estimate is used to combine both measurements with the result σtt̅ =7.70±0.52  pb, for a top-quark mass of 172.5  GeV/c2.

Measurement of the Ratio σtt̅ /σZ/γ*→ll and Precise Extraction of the tt̅ Cross Section

We report a measurement of the ratio of the tt̅ to Z/γ* production cross sections in √s=1.96  TeV pp̅ collisions using data corresponding to an integrated luminosity of up to 4.6  fb-1, collected by the CDF II detector. The tt̅ cross section ratio is measured using two complementary methods, a b-jet tagging measurement and a topological approach. By multiplying the ratios by the well-known theoretical Z/γ*→ll cross section predicted by the standard model, the extracted tt̅ cross sections are effectively insensitive to the uncertainty on luminosity. A best linear unbiased estimate is used to combine both measurements with the result σtt̅ =7.70±0.52  pb, for a top-quark mass of 172.5  GeV/c2.

Measurement of the Ratio σtt̅ /σZ/γ*→ll and Precise Extraction of the tt̅ Cross Section

We report a measurement of the ratio of the top-antitop to Z/gamma* production cross sections in sqrt(s) = 1.96 TeV proton-antiproton collisions using data corresponding to an integrated luminosity of up to 4.6 fb-1, collected by the CDF II detector. The top-antitop cross section ratio is measured using two complementary methods, a b-jet tagging measurement and a topological approach. By multiplying the ratios by the well-known theoretical Z/gamma*->ll cross section, the extracted top-antitop cross sections are effectively insensitive to the uncertainty on luminosity. A best linear unbiased estimate is used to combine both measurements with the result sigma_(top-antitop) = 7.70 +/- 0.52 pb, for a top-quark mass of 172.5 GeV/c^2.

First measurement of the ratio of branching fractions B(Λb0→Λc+μ-ν̅ μ)/B(Λb0→Λc+π-)

This article presents the first measurement of the ratio of branching fractions B(Λb0→Λc+μ-ν̅ μ)/B(Λb0→Λc+π-). Measurements in two control samples using the same technique B(B̅ 0→D+μ-ν̅ μ)/B(B̅ 0→D+π-) and B(B̅ 0→D*(2010)+μ-ν̅ μ)/B(B̅ 0→D*(2010)+π-) are also reported. The analysis uses data from an integrated luminosity of approximately 172  pb-1 of pp̅ collisions at √s=1.96  TeV, collected with the CDF II detector at the Fermilab Tevatron. The relative branching fractions are measured to be B(Λb0→Λc+μ-ν̅ μ)/B(Λb0→Λc+π-)=16.6±3.0(stat)±1.0(syst)+2.6/-3.4(PDG)±0.3(EBR), B(B̅ 0→D+μ-ν̅ μ)/B(B̅ 0→D+π-)= 9.9±1.0(stat)±0.6(syst)±0.4(PDG)±0.5(EBR), and B(B̅ 0→D*(2010)+μ-ν̅ μ)/B(B̅ 0→D*(2010)+π-)=16.5±2.3(stat)± 0.6(syst)±0.5(PDG)±0.8(EBR). The uncertainties are from statistics (stat), internal systematics (syst), world averages of measurements published by the Particle Data Group or subsidiary measurements in this analysis (PDG), and unmeasured branching fractions estimated from theory (EBR), respectively. This article also presents measurements of the branching fractions of four new Λb0 semileptonic decays: Λb0→Λc(2595)+μ-ν̅ μ, Λb0→Λc(2625)+μ-ν̅ μ, Λb0→Σc(2455)0π+μ-ν̅ μ, and Λb0→Σc(2455)++π-μ-ν̅ μ, relative to the branching fraction of the Λb0→Λc+μ-ν̅ μ decay. Finally, the transverse-momentum distribution of Λb0 baryons produced in pp̅ collisions is measured and found to be significantly different from that of B̅ 0 mesons, which results in a modification in the production cross-section ratio σΛb0/σB̅ 0 with respect to the CDF I measurement.

First Observation of B̅ s0→Ds±K∓ and Measurement of the Ratio of Branching Fractions B(B̅ s0→Ds±K∓)/B(B̅ s0→Ds+π-)

A combined mass and particle identification fit is used to make the first observation of the decay B̅ s0→Ds±K∓ and measure the branching fraction of B̅ s0→Ds±K∓ relative to B̅ s0→Ds+π-. This analysis uses 1.2  fb-1 integrated luminosity of pp̅ collisions at √s=1.96  TeV collected with the CDF II detector at the Fermilab Tevatron collider. We observe a B̅ s0→Ds±K∓ signal with a statistical significance of 8.1σ and measure B(B̅ s0→Ds±K∓)/B(B̅ s0→Ds+π-)=0.097±0.018(stat)±0.009(syst).

First Observation of B̅ s0→Ds±K∓ and Measurement of the Ratio of Branching Fractions B(B̅ s0→Ds±K∓)/B(B̅ s0→Ds+π-)

A combined mass and particle identification fit is used to make the first observation of the decay Bs --> Ds K and measure the branching fraction of Bs --> Ds K relative to Bs --> Ds pi. This analysis uses 1.2 fb^-1 integrated luminosity of pbar-p collisions at sqrt(s) = 1.96 TeV collected with the CDF II detector at the Fermilab Tevatron collider. We observe a Bs --> Ds K signal with a statistical significance of 8.1 sigma and measure Br(Bs --> Ds K)/Br(Bs --> Ds pi) = 0.097 +- 0.018(stat) +- 0.009(sys).

An application of a physically based SOIL model to the Bowen ratio data

Yhteenveto: Haihdunnan mittaamisesta ja mallintamisesta peltoalueella

Perinatal mortality and maternal health in rural China

Background and context Since the economic reforms of 1978, China has been acclaimed as a remarkable economy, achieving 9% annual growth per head for more than 25 years. However, China's health sector has not fared well. The population health gains slowed down and health disparities increased. In the field of health and health care, significant progress in maternal care has been achieved. However, there still remain important disparities between the urban and rural areas and among the rural areas in terms of economic development. The excess female infant deaths and the rapidly increasing sex ratio at birth in the last decade aroused serious concerns among policy makers and scholars. Decentralization of the government administration and health sector reform impacts maternal care. Many studies using census data have been conducted to explore the determinants of a high sex ratio at birth, but no agreement has been so far reached on the possible contributing factors. No study using family planning system data has been conducted to explore perinatal mortality and sex ratio at birth and only few studies have examined the impact of the decentralization of government and health sector reforms on the provision and organization of maternal care in rural China. Objectives The general objective of this study was to investigate the state of perinatal health and maternal care and their determinants in rural China under the historic context of major socioeconomic reforms and the one child family planning policy. The specific objectives of the study included: 1) to study pregnancy outcomes and perinatal health and their correlates in a rural Chinese county; 2) to examine the issue of sex ratio at birth and its determinants in a rural Chinese county; 3) to explore the patterns of provision, utilization, and content of maternal care in a rural Chinese county; 4) to investigate the changes in the use of maternal care in China from 1991 to 2003. Materials and Methods This study is based on a project for evaluating the prenatal care programme in Dingyuan county in 1999-2003, Anhui province, China and a nationwide household health survey to describe the changes in maternal care utilization. The approaches used included a retrospective cohort study, cross sectional interview surveys, informant interviews, observations and the use of statistical data. The data sources included the following: 1) A cohort of pregnant women followed from pregnancy up to 7 days after birth in 20 townships in the study county, collecting information on pregnancy outcomes using family planning records; 2) A questionnaire interview survey given to women who gave birth between 2001 and 2003; 3) Various statistical and informant surveys data collected from the study county; 4) Three national household health interview survey data sets (1993-2003) were utilized, and reanalyzed to described the changes in maternity care utilization. Relative risks (RR) and their confidence intervals (CI) were calculated for comparison between parity, approval status, infant sex and township groups. The chi-square test was used to analyse the disparity of use of maternal care between and within urban and rural areas and its trend across the years in China. Logistic regression was used to analyse the factors associated with hospital delivery in rural areas. Results There were 3697 pregnancies in the study cohort, resulting in 3092 live births in a total population of 299463 in the 20 study townships during 1999-2000. The average age at pregnancy in the cohort was 25.9 years. Of the women, 61% were childless, 38% already had one child and 0.3% had two children before the current pregnancy. About 90% of approved pregnancies ended in a live birth while 73% of the unapproved ones were aborted. The perinatal mortality rate was 69 per thousand births. If the 30 induced abortions in which the gestational age was more than 28 weeks had been counted as perinatal deaths, the perinatal mortality rate would have been as high as 78 per thousand. The perinatal mortality rate was negatively associated with the wealth of the township. Approximately two thirds of the perinatal deaths occurred in the early neonatal period. Both the still birth rate and the early neonatal death rate increased with parity. The risk of a stillbirth in a second pregnancy was almost four times that for a first pregnancy, while the risk of early neonatal deaths doubled. The early neonatal mortality rate was twice as high for female as for male infants. The sex difference in the early neonatal mortality rate was mainly attributable to mortality in second births. The male early neonatal mortality rate was not affected by parity, while the female early neonatal mortality rate increased dramatically with parity: it was about six times higher for second births than for first births. About 82% early neonatal deaths happened within 24 hours after birth, and during that time, girls were almost three times more likely to die than boys. The death rate of females on the day of birth increased much more sharply with parity than that of males. The total sex ratio at birth of 3697 registered pregnancies was 152 males to 100 females, with 118 and 287 in first and second pregnancies, respectively. Among unapproved pregnancies, there were almost 5 live-born boys for each girl. Most prenatal and delivery care was to be taken care of in township hospitals. At the village level, there were small private clinics. There was no limitation period for the provision of prenatal and postnatal care by private practitioners. They were not permitted to provide delivery care by the county health bureau, but as some 12% of all births occurred either at home or at private clinics; some village health workers might have been involved. The county level hospitals served as the referral centers for the township hospitals in the county. However, there was no formal regulation or guideline on how the referral system should work. Whether or not a woman was referred to a higher level hospital depended on the individual midwife's professional judgment and on the clients' compliance. The county health bureau had little power over township hospitals, because township hospitals had in the decentralization process become directly accountable to the township government. In the township and county hospitals only 10-20% of the recurrent costs were funded by local government (the township hospital was funded by the township government and the county hospital was funded by the county government) and the hospitals collected user fees to balance their budgets. Also the staff salaries depended on fee incomes by the hospital. The hospitals could define the user charges themselves. Prenatal care consultations were however free in most township hospitals. None of the midwives made postnatal home visits, because of low profit of these services. The three national household health survey data showed that the proportion of women receiving their first prenatal visit within 12 weeks increased greatly from the early to middle 1990s in all areas except for large cities. The increase was much larger in the rural areas, reducing the urban-rural difference from more than 4 times to about 1.4 times. The proportion of women that received antenatal care visits meeting the Ministry of Health s standard (at least 5 times) in the rural areas increased sharply from 12% in 1991-1993 to 36% in 2001-2003. In rural areas, the proportion increase was much faster in less developed areas than in developed areas. The hospital delivery rate increased slightly from 90% to 94% in urban areas while the proportion increased from 27% to 69% in rural areas. The fastest change was found to be in type 4 rural areas, where the utilization even quadrupled. The overall difference between rural and urban areas was substantially narrowed over the period. Multiple logistic regression analysis shows that time periods, residency in rural or urban areas, income levels, age group, education levels, delivery history, occupation, health insurance and distance from the nearest health care facilities were significantly associated with hospital delivery rates. Conclusions 1. Perinatal mortality in this study was much higher than that for urban areas as well as any reported rate from specific studies in rural areas of China. Previous studies in which calculations of infant mortality were not based on epidemiological surveys have been shown to underestimate the rates by more than 50%. 2. Routine statistics collected by the Chinese family planning system proved to be a reliable data source for studying perinatal health, including still births, neonatal deaths, sex ratio at birth and among newborns. National Household Health Survey data proved to be a useful and reliable data source for studying population health and health services. Prior to this research there were few studies in these areas available to international audiences. 3.Though perinatal mortality rate was negatively associated with the level of township economic development, the excess female early neonatal mortality rate contributed much more to high perinatal mortality rate than economic factors. This was likely a result of the role of the family planning policy and the traditional preferences for sons, which leads to lethal neglect of female newborns and high perinatal mortality. 4. The selective abortions of female foetuses were likely to contribute most to the high sex ratio at birth. The underreporting of female births seemed to have played a secondary role. The higher early neonatal mortality rate in second-born as compared to first-born children, particularly in females, may indicate that neglect or poorer care of female newborn infants also contributes to the high sex ratio at birth or among newborns. Existing family planning policy proved not to effectively control the steadily increased birth sex ratio. 5. The rural-urban gap in service utilization was on average significantly narrowed in terms of maternal healthcare in China from 1991 to 2003. This demonstrates that significant achievements in reducing inequities can be made through a combination of socio-economic development and targeted investments in improving health services, including infrastructure, staff capacities, and subsidies to reduce the costs of service utilization for the poorest. However, the huge gap which persisted among cities of different size and within different types of rural areas indicated the need for further efforts to support the poorest areas. 6. Hospital delivery care in the study county was better accepted by women because most of women think delivery care was very important while prenatal and postnatal care were not. Hospital delivery care was more systematically provided and promoted than prenatal and postnatal care by township hospital in the study area. The reliance of hospital staff income on user fees gave the hospitals an incentive to put more emphasis on revenue generating activities such as delivery care instead of prenatal and postnatal care, since delivery care generated much profits than prenatal and postnatal care . Recommendations 1. It is essential for the central government to re-assess and modify existing family planning policies. In order to keep national sex balance, the existing practice of one couple one child in urban areas and at-least-one-son a couple in rural areas should be gradually changed to a two-children-a-couple policy throughout the country. The government should establish a favourable social security policy for couples, especially for rural couples who have only daughters, with particular emphasis on their pension and medical care insurance, combined with an educational campaign for equal rights for boys and girls in society. 2. There is currently no routine vital-statistics registration system in rural China. Using the findings of this study, the central government could set up a routine vital-statistics registration system using family planning routine work records, which could be used by policy makers and researchers. 3. It is possible for the central and provincial government to invest more in the less developed and poor rural areas to increase the access of pregnant women in these areas to maternal care services. Central government together with local government should gradually provide free maternal care including prenatal and postnatal as well as delivery care to the women in poor and less developed rural areas. 4. Future research could be done to explore if county and the township level health care sector and the family planning system could be merged to increase the effectiveness and efficiency of maternal and child care. 5. Future research could be done to explore the relative contribution of maternal care, economic development and family planning policy on perinatal and child health using prospective cohort studies and community based randomized trials. Key words: perinatal health, perinatal mortality, stillbirth, neonatal death, sex selective abortion, sex ratio at birth, family planning, son preference, maternal care, prenatal care, postnatal care, equity, China