Nanoscale studies of materials using x-ray synchrotron radiation and mesoscopic modelling

X-ray synchrotron radiation was used to study the nanostructure of cellulose in Norway spruce stem wood and powders of cobalt nanoparticles in cellulose support. Furthermore, the growth of metallic clusters was modelled and simulated in the mesoscopic size scale. Norway spruce was characterized with x-ray microanalysis at beamline ID18F of the European Synchrotron Radiation Facility in Grenoble. The average dimensions and the orientation of cellulose crystallites was determined using x-ray microdiffraction. In addition, the nutrient element content was determined using x-ray fluorescence spectroscopy. Diffraction patterns and fluorescence spectra were simultaneously acquired. Cobalt nanoparticles in cellulose support were characterized with x-ray absorption spectroscopy at beamline X1 of the Deutsches Elektronen-Synchrotron in Hamburg, complemented by home lab experiments including x-ray diffraction, electron microscopy and measurement of magnetic properties with a vibrating sample magnetometer. Extended x-ray absorption fine structure spectroscopy (EXAFS) and x-ray diffraction were used to solve the atomic arrangement of the cobalt nanoparticles. Scanning- and transmission electron microscopy were used to image the surfaces of the cellulose fibrils, where the growth of nanoparticles takes place. The EXAFS experiment was complemented by computational coordination number calculations on ideal spherical nanocrystals. The growth process of metallic nanoclusters on cellulose matrix is assumed to be rather complicated, affected not only by the properties of the clusters themselves, but essentially depending on the cluster-fiber interfaces as well as the morphology of the fiber surfaces. The final favored average size for nanoclusters, if such exists, is most probably a consequence of these two competing tendencies towards size selection, one governed by pore sizes, the other by the cluster properties. In this thesis, a mesoscopic model for the growth of metallic nanoclusters on porous cellulose fiber (or inorganic) surfaces is developed. The first step in modelling was to evaluate the special case of how the growth proceeds on flat or wedged surfaces.

Characterisation of cellulose- and lignin-based materials using x-ray scattering methods

Wood is an important material for the construction and pulping industries. Using x-ray diffraction the microfibril angle of Sitka spruce wood was studied in the first part of this thesis. Sitka spruce (Picea sitchensis [Bong.] Carr.) is native to the west coast of North America, but due to its fast growth rate, it has also been imported to Europe. So far, its nanometre scale properties have not been systematically characterised. In this thesis the microfibril angle of Sitka spruce was shown to depend significantly on the origin of the tree in the first annual rings near the pith. Wood can be further processed to separate lignin from cellulose and hemicelluloses. Solid cellulose can act as a reducer for metal ions and it is also a porous support for nanoparticles. By chemically reducing nickel or copper in the solid cellulose support it is possible to get small nanoparticles on the surfaces of the cellulose fibres. Cellulose supported metal nanoparticles can potentially be used as environmentally friendly catalysts in organic chemistry reactions. In this thesis the size of the nickel and copper containing nanoparticles were studied using anomalous small-angle x-ray scattering and wide-angle x-ray scattering. The anomalous small-angle x-ray scattering experiments showed that the crystallite size of the copper oxide nanoparticles was the same as the size of the nanoparticles, so the nanoparticles were single crystals. The nickel containing nanoparticles were amorphous, but crystallised upon heating. The size of the nanoparticles was observed to be smaller when the reduction of nickel was done in aqueous ammonium hydrate medium compared to reduction made in aqueous solution. Lignin is typically seen as the side-product of wood industries. Lignin is the second most abundant natural polymer on Earth, and it possesses potential to be a useful material for many purposes in addition to being an energy source for the pulp mills. In this thesis, the morphology of several lignins, which were produced by different separation methods from wood, was studied using small-angle and ultra small-angle x-ray scattering. It was shown that the fractal model previously proposed for the lignin structure does not apply to most of the extracted lignin types. The only lignin to which the fractal model could be applied was kraft lignin. In aqueous solutions the average shape of the low molar mass kraft lignin particles was observed to be elongated and flat. The average shape does not necessarily correspond to the shape of the individual particles because of the polydispersity of the fraction and due to selfassociation of the particles. Lignins, and especially lignosulfonate, have many uses as dispersants, binders and emulsion stabilisers. In this thesis work the selfassociation of low molar mass lignosulfonate macromolecules was observed using small-angle x-ray scattering. By taking into account the polydispersity of the studied lignosulfonate fraction, the shape of the lignosulfonate particles was determined to be flat by fitting an oblate ellipsoidal model to the scattering intensity.

Effect of water vapour stabilization of raw materials on the quality of the inhalation product

Generation of raw materials for dry powder inhalers by different size reduction methods can be expected to influence physical and chemical properties of the powders. This can cause differences in particle size, size distribution, shape, crystalline properties, surface texture and energy. These physical properties of powders influence the behaviour of particles before and after inhalation. Materials with an amorphous surface have different surface energy compared to materials with crystalline surface. This can affect the adhesion and cohesion of particles. Changes in the surface nature of the drug particles results in a change in product performance. By stabilization of the raw materials the amorphous surfaces are converted into crystalline surfaces. The primary aim of the study was to investigate the influence of the surface properties of the inhalation particles on the quality of the product. The quality of the inhalation product is evaluated by measuring the fine particle dose (FPD). FDP is the total dose of particles with aerodynamic diameters smaller than 5,0 μm. The secondary aim of this study was to achieve the target level of the FPD and the stability of the FPD. This study was also used to evaluate the importance of the stabilization of the inhalation powders. The study included manufacturing and analysing drug substance 200 μg/dose inhalation powder batches using non-stabilized or stabilized raw materials. The inhaler formulation consisted of micronized drug substance, lactose <100μm and micronized lactose <10μm. The inhaler device was Easyhaler®. Stabilization of the raw materials was done in different relative humidity, temperature and time. Surface properties of the raw materials were studied by dynamic vapour sorption, scanning electron microscopy and three-point nitrogen adsorption technique. Particle size was studied by laser diffraction particle size analyzer. Aerodynamic particle size distribution from inhalers was measured by new generation impactor. Stabilization of all three raw materials was successful. A clear difference between nonstabilized and stabilized raw materials was achieved for drug substance and lactose <10μm. However for lactose <100μm the difference wasn’t as clear as wanted. The surface of the non-stabilized drug substance was more irregular and the particles had more roughness on the surface compared to the stabilized drug substances particles surface. The surface of the stabilized drug particles was more regular and smoother than non-stabilized. Even though a good difference between stabilized and non-stabilized raw materials was achieved, a clear evidence of the effect of the surface properties of the inhalation particles on the quality of the product was not observed. Stabilization of the raw materials didn’t lead to a higher FPD. Possible explanations for the unexpected result might be too rough conditions in the stabilization of the drug substance or smaller than wanted difference in the degree of stabilization of the main component of the product <100μm. Despite positive effects on the quality of the product were not seen there appears to be some evidence that stabilized drug substance results in smaller particle size of dry powder inhalers.

Confucian education and enlightenment for the masses in the manner of Guwen guanzhi

The topic of this study is the most renowned anthology of essays written in Literary Chinese, Guwen guanzhi, compiled and edited by Wu Chengquan (Chucai) and Wu Dazhi (Diaohou), and first published during the Qing dynasty, in 1695. Because of the low social standing of the compilers, their anthology remained outside the recommended study materials produced by members of the established literati and used for preparing students in the imperial civil-service examinations. However, since the end of the imperial era, Guwen guanzhi has risen to a position as the classical anthology par excellence. Today it is widely used as required or supplementary reading material of Literary Chinese in middle-schools both in Mainland China and on Taiwan. The goal of this study is to explain the persistent longevity of the anthology. So far, Guwen guanzhi has not been a topic of any published academic study, and the opinions expressed on it in various sources are widely discrepant. Through a comparative study with a dozen classical Chinese anthologies in use during the early Qing dynasty, this study reveals the extent to which the compilers of Guwen guanzhi modelled their work after other selections. Altogether 86 % of the texts in Guwen guanzhi originate from another Qing era anthology, Guwen xiyi, often copied character by character. However, the notes and commentaries are all different. Concentrating on the special characteristics unique to Guwen guanzhi—the commentaries and certain peculiarities in the selection of texts—this study then discusses the possible reasons for the popularity of Guwen guanzhi over the competing readers during the Qing era. Most remarkably, Guwen guanzhi put in practise the equalitarian, educational ideals of the Ming philosopher Wang Shouren (Yangming). Thus Guwen guanzhi suited the self-enlightenment needs of the ”subordinate classes”, in particular the rising middle-class comprised mainly of merchants. The lack of moral teleology, together with the compact size, relative comprehensiveness of the selection and good notes and comments, have made Guwen guanzhi well suited for the new society since the abolition of the imperial examination system. Through a content analysis, based on a sample of the texts, this study measures the relative emphasis on centralism and localism (both in concrete and spiritual terms) expressed in the texts of Guwen guanzhi. The analysis shows that the texts manifest some bias towards emphasising innate virtue on the expense of state-defined moral. This may reflect hidden critique towards intellectual oppression by the centralised imperial rule. During the early decades of the Qing era, such critique was often linked to Ming-loyalism. Finally, this study concludes that the kind of ”spiritual localism” that Guwen guanzhi manifests gives it the potential to undermine monolithic orthodoxy even in today’s Chinese societies. This study has progressed hand in hand with the translation of a selection of texts from Guwen guanzhi into Finnish, published by Gaudeamus Helsinki University Press: Jadekasvot – Valittuja tarinoita Kiinan muinaisajoilta (2005), Jadelähde – Valittuja kirjoituksia Kiinan keskiajalta (2007) and Jadepeili – Valittuja kirjoituksia keisarillisen Kiinan kulta-ajoilta (2008). All translations are critical editions, complete with extensive notation. The trilogy is the first comprehensive translation based on Guwen guanzhi in a European language.

Given and News : Media discourse and the construction of community on national days

National anniversaries such as independence days demand precise coordination in order to make citizens change their routines to forego work and spend the day at rest or at festivities that provide social focus and spectacle. The complex social construction of national days is taken for granted and operates as a given in the news media, which are the main agents responsible for coordinating these planned disruptions of normal routines. This study examines the language used in the news to construct the rather unnatural idea of national days and to align people in observing them. The data for the study consist of news stories about the Fourth of July in the New York Times, sampled over 150 years and are supplemented by material from other sources and other countries. The study is multidimensional, applying concepts from pragmatics (speech acts, politeness, information structure), systemic functional linguistics (the interpersonal metafunction and the Appraisal framework) and cognitive linguistics (frames, metaphor) as well as journalism and communications to arrive at an interdisciplinary understanding of how resources for meaning are used by writers and readers of the news stories. The analysis shows that on national anniversaries, nations tend to be metaphorized as persons having birthdays, to whom politeness should be shown. The face of the nation is to be respected in the sense of identifying the nation's interests as one's own (positive face) and speaking of citizen responsibilities rather than rights (negative face). Resources are available for both positive and negative evaluations of events and participants and the newspaper deftly changes footings (Goffman 1981) to demonstrate the required politeness while also heteroglossically allowing for a certain amount of disattention and even protest - within limits, for state holidays are almost never construed as Bakhtinian festivals, as they tend to reaffirm the hierarchy rather than invert it. Celebrations are evaluated mainly for impressiveness, and for the essentially contested quality of appropriateness, which covers norms of predictability, size, audience response, aesthetics, and explicit reference to the past. Events may also be negatively evaluated as dull ("banal") or inauthentic ("hoopla"). Audiences are evaluated chiefly in terms of their enthusiasm, or production of appropriate displays for emotional response, for national days are supposed to be occasions of flooding-out of nationalistic feeling. By making these evaluations, the newspaper reinforces its powerful position as an independent critic, while at the same time playing an active role in the construction and reproduction of emotional order embodied in "the nation's birthday." As an occasion for mobilization and demonstrations of power, national days may be seen to stand to war in the relation of play to fighting (Bateson 1955). Evidence from the newspaper's coverage of recent conflicts is adduced to support this analysis. In the course of the investigation, methods are developed for analyzing large collections of newspaper content, particularly topical soft news and feature materials that have hitherto been considered less influential and worthy of study than so-called hard news. In his work on evaluation in newspaper stories, White (1998) proposed that the classic hard news story is focused on an event that threatens the social order, but news of holidays and celebrations in general does not fit this pattern, in fact its central event is a reproduction of the social order. Thus in the system of news values (Galtung and Ruge 1965), national holiday news draws on "ground" news values such as continuity and predictability rather than "figure" news values such as negativity and surprise. It is argued that this ground helps form a necessary space for hard news to be seen as important, similar to the way in which the information structure of language is seen to rely on the regular alternation of given and new information (Chafe 1994).