2,1,3-Bentsoksadiatsolirakenteiset molekyylit antibakteerisina ja antiparasiittisina yhdisteinä

Aikaisemman tutkimuksen perusteella tiedettiin tiettyjen 2,1,3-bentsoksadiatsolirakenteisten molekyylien olevan aktiivisia Chlamydia pneumoniae –bakteeria vastaan. Tutkimusta lähdettiin jatkamaan ja 2,1,3-bentsoksadiatsolimolekyylien rakenne-aktiivisuusuhteista haluttiin saada lisätietoa. Tarkoituksena oli kehittää 2,1,3-bentsoksadiatsolimolekyyleille ja sen avulla muodostaa molekyylikirjasto. Syntetisoidut molekyylit haluttiin testata sekä Chlamydia pneumoniae -bakteeria että Leishmania donovani –parasiittia vastaan. Chlamydia pneumoniae –bakteeri aiheuttaa akuutteja ylä- ja alahengitystieinfektiota, kuten keuhkoputkentulehdusta. Akuutissa tulehduksessa oireet vaihtelevat huomattavasti. Chlamydia pneumoniae –bakteerilla on myös taipumus aiheuttaa kroonisia tulehduksia. Nämä ovat useissa tutkimuksissa yhdistetty kansantaloudellisesti merkittäviin sairauksiin, kuten ateroskleroosiin ja astmaan. Leishmanioosi on toiseksi yleisin loissairaus ihmisellä malarian jälkeen. Leishmania donovani –parasiitti voi aiheuttaa tappavaa viskeraalista leishmanioosia. Vuodessa leishmanioosiin kuolee yli 50 000 ihmistä. Viime vuosina leishmanioosin lääkehoidossa on esiintynyt monenlaisia ongelmia. Osat lääkkeistä ovat menettäneet tehonsa ja osalla esiintyy vakavia haittavaikutuksia. 2,1,3-Bentsoksadiatsolirakenteisille yhdisteille saatiin kehitettyä toimiva synteesireitti. Lähtöaineena käytettiin 4-amino-2-nitrobentsoehappoa, josta saatiin hapettavalla renkaansulkeutumisreaktiolla 2,1,3-bentsoksadiatsoli-5-karboksyylihappoa. Karboksyylihaposta syntetisoitiin amidi-välituotteen kautta 2,1,3-bentsoksadiatsoli-5-karbonitriiliä. Hydroksyyliamiini hydrokloridin avulla 2,1,3-bentsoksadiatsoli-5-karbonitriilistä muodostettiin vastaavaa karboksimidamidia, joka oli synteesireitin yhteinen välituote kaikille molekyyleille. Viimeisessä vaiheessa N´-hydroksidi-2,1,3-bentsoksadiatsoli-5-karboksimidamidin annettiin reagoida joko fenyyli-isosyanaatin tai fenyyli-isotiosyanaatin kanssa, jolloin saatiin lopputuotetta. Synteesireitin kehittäminen osoittautui haastavaksi ja loppujen lopuksi saatiin ainoastaan kolme lopputuotetta syntetisoitua. Yksi lopputuotteista testattiin C. pneumoniae –bakteeria vastaan Åbo akademissa Turussa. Testattavaa yhdiste ei sisältänyt 2,1,3-bentsoksadiatsoliarengasta ja bioaktiivisuuskokeen tulos oli odotusten mukainen. Yhdiste ei ollut aktiivinen C. pneumoniae –bakteeria vastaan alhaisilla konsentraatioilla ja tuloksesta voitiin todeta 2,1,3-bentsoksadiatsolirengaan olevan tärkeä aktiivisuuden kannalta. Kaksi lopputuotetta saatiin testaukseen Leishamania donovani –parasiittia vastaan Israeliin. Ainoastaan toinen molekyyleistä sisälsi 2,1,3-bentsoksadiatsolirakenteen. Bioaktiivisuuskokeiden tulokset olivat erittäin rohkaisevia. Yhdisteet olivat aktiivisia parasiittia vastaan jo alhaisilla konsentraatioilla. Kuitenkin 2,1,3-bentsoksadiatsolirakenteinen molekyyli oli aktiivisempi, joten tämäkin aktiivisuuskokeen perusteella huomattiin rengasrakenteen olevan tärkeä aktiivisuuden kannalta.

Novel Mass Spectrometric Analysis Methods for Anabolic Androgenic Steroids in Sports Drug Testing

The feasibility of different modern analytical techniques for the mass spectrometric detection of anabolic androgenic steroids (AAS) in human urine was examined in order to enhance the prevalent analytics and to find reasonable strategies for effective sports drug testing. A comparative study of the sensitivity and specificity between gas chromatography (GC) combined with low (LRMS) and high resolution mass spectrometry (HRMS) in screening of AAS was carried out with four metabolites of methandienone. Measurements were done in selected ion monitoring mode with HRMS using a mass resolution of 5000. With HRMS the detection limits were considerably lower than with LRMS, enabling detection of steroids at low 0.2-0.5 ng/ml levels. However, also with HRMS, the biological background hampered the detection of some steroids. The applicability of liquid-phase microextraction (LPME) was studied with metabolites of fluoxymesterone, 4-chlorodehydromethyltestosterone, stanozolol and danazol. Factors affecting the extraction process were studied and a novel LPME method with in-fiber silylation was developed and validated for GC/MS analysis of the danazol metabolite. The method allowed precise, selective and sensitive analysis of the metabolite and enabled simultaneous filtration, extraction, enrichment and derivatization of the analyte from urine without any other steps in sample preparation. Liquid chromatographic/tandem mass spectrometric (LC/MS/MS) methods utilizing electrospray ionization (ESI), atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization (APPI) were developed and applied for detection of oxandrolone and metabolites of stanozolol and 4-chlorodehydromethyltestosterone in urine. All methods exhibited high sensitivity and specificity. ESI showed, however, the best applicability, and a LC/ESI-MS/MS method for routine screening of nine 17-alkyl-substituted AAS was thus developed enabling fast and precise measurement of all analytes with detection limits below 2 ng/ml. The potential of chemometrics to resolve complex GC/MS data was demonstrated with samples prepared for AAS screening. Acquired full scan spectral data (m/z 40-700) were processed by the OSCAR algorithm (Optimization by Stepwise Constraints of Alternating Regression). The deconvolution process was able to dig out from a GC/MS run more than the double number of components as compared with the number of visible chromatographic peaks. Severely overlapping components, as well as components hidden in the chromatographic background could be isolated successfully. All studied techniques proved to be useful analytical tools to improve detection of AAS in urine. Superiority of different procedures is, however, compound-dependent and different techniques complement each other.

Anthraquinones from the Fungus Dermocybe sanguinea as Textile Dyes

This study is based on the multidiciplinary approach of using natural colorants as textile dyes. The author was interested in both the historical and traditional aspects of natural dyeing as well as the modern industrial applications of the pure natural compounds. In the study, the anthraquinone compounds were isolated as aglycones from the ectomycorrhizal fungus Dermocybe sanguinea. The endogenous beta-glucosidase of the fungus was used to catalyse the hydrolysis of the O-glycosyl linkage in emodin- and dermocybin-1-beta-D-glucopyranosides. The method, in which 10.45 kg of fresh fungi was starting material, yielded two fractions: 56.0 g of Fraction 1 (94% of the total amount of pigment,) consisting almost exclusively of the main pigments emodin and dermocybin, and 3.3 g of Fraction 2 (6%) consisting mainly of the anthraquinone carboxylic acids. The anthraquinone compounds in Fractions 1 and 2 were separated by one- and two-dimensional thin-layer-chromatography (TLC) using silica plates. 1D TLC showed that neither an acidic nor a basic solvent system alone separated completely all the anthraquinones isolated from D. sanguinea, in spite of the variation of the rations of the solvent components in the systems. Thus, a new 2D TLC technique was developed, applying n-pentanol-pyridine-methanol (6:4:3, v/v/v) and toluene-ethyl acetate-ethanol-formic acid (10:8:1:2, v/v/v/v) as eluents. Fifteen different anthraquinone derivatives were completely separated from one another. Emodin, physcion, endocrocin, dermolutein, dermorubin, 5-chlorodermorubin, emodin-1-beta-D-glucopyranoside, dermocybin-1-beta-D-glucopyranoside and dermocybin, and five new compounds, not earlier identified in D. sanguinea, 7-chloroemodin, 5,7-dichloroemodin, 5,7-dichloroendocrocin, 4-hydroxyaustrocorticone and austrocorticone, were separated and identified on the basis of their Rf-values, UV/Vis spectra and mass spectra. One substance remained unidentified, because of its very low concentration. The anthraquinones in Fractions 1 and 2 were preparatively separeted by liquid-liquid partition, with isopropylmethyl ketone and aqueous phosphate buffer as the solvent system. Advantage was taken of the principle of stepwise pH-gradient elution. The multiple liquid-liquid partition (MLLP) offered an excellent method for the preparative separation of compounds, which contain acidic groups such as the phenolic OH and COOH groups. Due to their strong aggregation properties, these compounds are, without derivatization, very difficult to separate on a preparative scale by chromatographic methods. By the MLLP method remarkable separations were achieved for the components in each mixture. Emodin and dermocybin were both obtained from Fraction 1 in a purity of at least 99%. Pure emodin and dermocybin were applied as mordant dyes to wool and polyamide and as disperse dyes to polyester and polyamide, using the high temperature (HT) technique. A mixture of dermorubin and 5-chlorodermorubin was applied as an acid dye to wool. In these experiments, synthetic dyes were used as references. Experiments were also performed using water extract of the air-dried fungi as dye liquor for wool and silk. The main colouring compounds in the crude water extract were emodin and dermocybin, which indicated that the O-glycosyl linkages in emodin- and dermocybin-1-beta-D-glucopyranosides were broken by the beta-glucosidase enzyme. Apparently, the hydrolysis occurred during the drying of the fungi and during the soaking of the dried fruit bodies overnight when preparing the dyebath. The colour of each dyed material was investigated in terms of the CIELAB L*, a* and b* values, and the colour fastness to light, washing and rubbing was tested according to the ISO standards. In the mordant dyeing experiments, emodin dyed wool and polyamide yellow and red, depending on the pH of the dyebath. Dermocybin gave purple and violet colours. The colour fastness of the mordant-dyed fabrics varied from good to moderate. The fastness properties of the natural anthraquinone carboxylic acids on wool were good, indicating the strength of the ionic bonds between the COO- groups of the dyes and the NH3+ groups of the fibres. In the disperse dyeing experiments, emodin dyed polyester bright yellow and dermocybin bright reddish-orange, and the fabrics showed excellent colour fastness. In contrast, emodin and dermocybin successfully dyed polyamide brownish-orange and wine-red, respectively, but with only moderate fastness. In industrial dyeing processes, natural anthraquinone aglycone mixtures dyed wool and silk well even at low concentrations of mordants, i.e. with 10% of the weight of the fibre (owf) of KAl(SO4)2 and 1 or 0.5% owf of other mordants. This study showed that purified natural anthraquinone compounds can produce bright hues with good colour-fastness properties in different textile materials. Natural anthraquinones have a significant potential for new dyeing techniques and will provide useful alternatives to synthetic dyes.

HPLC analysis of plant sterol oxidation products

Increased interest in the cholesterol-lowering effect of plant sterols has led to development of plant sterol-enriched foods. When products are enriched, the safety of the added components must be evaluated. In the case of plant sterols, oxidation is the reaction of main concern. In vitro studies have indicated that cholesterol oxides may have harmful effects. Due their structural similarity, plant sterol oxidation products may have similar health implications. This study concentrated on developing high-performance liquid chromatography (HPLC) methods that enable the investigation of formation of both primary and secondary oxidation products and thus can be used for oxidation mechanism studies of plant sterols. The applicability of the methods for following the oxidation reactions of plant sterols was evaluated by using oxidized stigmasterol and sterol mixture as model samples. An HPLC method with ultraviolet and fluorescence detection (HPLC-UV-FL) was developed. It allowed the specific detection of hydroperoxides with FL detection after post-column reagent addition. The formation of primary and secondary oxidation products and amount of unoxidized sterol could be followed by using UV detection. With the HPLC-UV-FL method, separation between oxides was essential and oxides of only one plant sterol could be quantified in one run. Quantification with UV can lead to inaccuracy of the results since the number of double bonds had effect on the UV absorbance. In the case of liquid chromatography-mass spectrometry (LC-MS), separation of oxides with different functionalities was important because some oxides of the same sterol have similar molecular weight and moreover epimers have similar fragmentation behaviour. On the other hand, coelution of different plant sterol oxides with the same functional group was acceptable since they differ in molecular weights. Results revealed that all studied plant sterols and cholesterol seem to have similar fragmentation behaviour, with only relative ion abundances being slightly different. The major advantage of MS detection coupled with LC separation is the capability to analyse totally or partly coeluting analytes if these have different molecular weights. The HPLC-UV-FL and LC-MS methods were demonstrated to be suitable for studying the photo-oxidation and thermo-oxidation reactions of plant sterols. The HPLC-UV-FL method was able to show different formation rates of hydroperoxides during photo-oxidation. The method also confirmed that plant sterols have similar photo-oxidation behaviour to cholesterol. When thermo-oxidation of plant sterols was investigated by HPLC-UV-FL and LC-MS, the results revealed that the formation and decomposition of individual hydroperoxides and secondary oxidation products could be studied. The methods used revealed that all of the plant sterols had similar thermo-oxidation behaviour when compared with each other, and the predominant reactions and oxidation rates were temperature dependent. Overall, these findings showed that with these LC methods the oxidation mechanisms of plant sterols can be examined in detail, including the formation and degradation of individual hydroperoxides and secondary oxidation products, with less sample pretreatment and without derivatization.