Hydrogen soil deposition and atmospheric variations in the boreal zone

This research has been prompted by an interest in the atmospheric processes of hydrogen. The sources and sinks of hydrogen are important to know, particularly if hydrogen becomes more common as a replacement for fossil fuel in combustion. Hydrogen deposition velocities (vd) were estimated by applying chamber measurements, a radon tracer method and a two-dimensional model. These three approaches were compared with each other to discover the factors affecting the soil uptake rate. A static-closed chamber technique was introduced to determine the hydrogen deposition velocity values in an urban park in Helsinki, and at a rural site at Loppi. A three-day chamber campaign to carry out soil uptake estimation was held at a remote site at Pallas in 2007 and 2008. The atmospheric mixing ratio of molecular hydrogen has also been measured by a continuous method in Helsinki in 2007 - 2008 and at Pallas from 2006 onwards. The mean vd values measured in the chamber experiments in Helsinki and Loppi were between 0.0 and 0.7 mm s-1. The ranges of the results with the radon tracer method and the two-dimensional model were 0.13 - 0.93 mm s-1 and 0.12 - 0.61 mm s-1, respectively, in Helsinki. The vd values in the three-day campaign at Pallas were 0.06 - 0.52 mm s-1 (chamber) and 0.18 - 0.52 mm s-1 (radon tracer method and two-dimensional model). At Kumpula, the radon tracer method and the chamber measurements produced higher vd values than the two-dimensional model. The results of all three methods were close to each other between November and April, except for the chamber results from January to March, while the soil was frozen. The hydrogen deposition velocity values of all three methods were compared with one-week cumulative rain sums. Precipitation increases the soil moisture, which decreases the soil uptake rate. The measurements made in snow seasons showed that a thick snow layer also hindered gas diffusion, lowering the vd values. The H2 vd values were compared to the snow depth. A decaying exponential fit was obtained as a result. During a prolonged drought in summer 2006, soil moisture values were lower than in other summer months between 2005 and 2008. Such conditions were prevailing in summer 2006 when high chamber vd values were measured. The mixing ratio of molecular hydrogen has a seasonal variation. The lowest atmospheric mixing ratios were found in the late autumn when high deposition velocity values were still being measured. The carbon monoxide (CO) mixing ratio was also measured. Hydrogen and carbon monoxide are highly correlated in an urban environment, due to the emissions originating from traffic. After correction for the soil deposition of H2, the slope was 0.49±0.07 ppb (H2) / ppb (CO). Using the corrected hydrogen-to-carbon-monoxide ratio, the total hydrogen load emitted by Helsinki traffic in 2007 was 261 t (H2) a-1. Hydrogen, methane and carbon monoxide are connected with each other through the atmospheric methane oxidation process, in which formaldehyde is produced as an important intermediate. The photochemical degradation of formaldehyde produces hydrogen and carbon monoxide as end products. Examination of back-trajectories revealed long-range transportation of carbon monoxide and methane. The trajectories can be grouped by applying cluster and source analysis methods. Thus natural and anthropogenic emission sources can be separated by analyzing trajectory clusters.

Finnish and Austrian Wood Markets in a Changing Environment

At present the operating environment of sawmills in Europe is changing and there are uncertainties related in raw material supply in many countries. The changes in the operating environment of roundwood markets and the effects followed by these changes have brought up several interesting issues from the viewpoint of research. Lately new factors have been influencing the roundwood markets, such as increasing interest towards wood-based energy and implementation of new energy policies as well as changes in wood trade flows that affect the domestic markets in many countries. This Master’s thesis studies the adaptation ability of Finnish roundwood markets in a changing operating environment, aiming to produce an up-to-date analysis considering new development trends. The study concentrates on the roundwood markets from the viewpoint of sawmill industry since the industry is dependent on the functioning of the markets and sawmills are highly affected by the changes on the roundwood markets. To facilitate international comparison, the study is implemented by comparing Finnish and Austrian roundwood markets and analysing changes happening in the two countries. Finland and Austria share rather similar characteristics in the roundwood market structures, forest resources and forest ownership as well as production of roundwood and sawnwood. In addition they both are big exporters of forest industry products. In this study changes in the operating environment of sawmill industry both in Finland as well as in Austria are compared to each other aiming to recognise the main similarities and differences between the countries. In addition both development possibilities as well as challenges followed by the changes are discussed. The aim of the study is to define the main challenges and possibilities confronted by the actors on the markets and also to find new perspectives to approach these. The study is implemented as a qualitative study. The theoretical framework of the study describes the operating environment of wood markets from the viewpoint of the sawmill industry and represents the effects of supply and demand on the wood markets. The primary research material of the study was gathered by interviewing high level experts of forestry and sawmill industry in both Finland and Austria. The aim was to receive as extensive country specific viewpoint from the markets as possible, hence interviewees represented different parties of the markets. After creating country-specific profiles based on the theoretical framework a cross-country comparison was implemented. As a consequence the main similarities and differences in the operating environment and on the roundwood markets of Finland and Austria were recognized. In addition the main challenges and possibilites were identified. The results of the study offer a wide analysis regarding the main similarities and differences of the wood markets of Finland and Austria and their operating environments as well as concerning challenges and possibilities faced on the markets.

Adhesion,Presence and Antifouling of Deinococcus geothermalis in Paper Machine Environment

This thesis has two items: biofouling and antifouling in paper industry. Biofouling means unwanted microbial accumulation on surfaces causing e.g. disturbances in industrial processes, contamination of medical devices or of water distribution networks. Antifouling focuses on preventing accumulation of the biofilms in undesired places. Deinococcus geothermalis is a pink-pigmented, thermophilic bacterium, and extremely resistant towards radiation, UV-light and desiccation and known as a biofouler of paper machines forming firm and biocide resistant biofilms on the stainless steel surfaces. The compact structure of biofilm microcolonies of D. geothermalis E50051 and the adhesion into abiotic surfaces were investigated by confocal laser scanning microscope combined with carbohydrate specific fluorescently labelled lectins. The extracellular polymeric substance in D. geothermalis microcolonies was found to be a composite of at least five different glycoconjugates contributing to adhesion, functioning as structural elements, putative storages for water, gliding motility and likely also to protection. The adhesion threads that D. geothermalis seems to use to adhere on an abiotic surface and to anchor itself to the neighbouring cells were shown to be protein. Four protein components of type IV pilin were identified. In addition, the lectin staining showed that the adhesion threads were covered with galactose containing glycoconjugates. The threads were not exposed on planktic cells indicating their primary role in adhesion and in biofilm formation. I investigated by quantitative real-time PCR the presence of D. geothermalis in biofilms, deposits, process waters and paper end products from 24 paper and board mills. The primers designed for doing this were targeted to the 16S rRNA gene of D. geothermalis. We found D. geothermalis DNA from 9 machines, in total 16 samples of the 120 mill samples searched for. The total bacterial content varied in those samples between 107 to 3 ×1010 16S rRNA gene copies g-1. The proportion of D. geothermalis in those same samples was minor, 0.03 1.3 % of the total bacterial content. Nevertheless D. geothermalis may endanger paper quality as its DNA was shown in an end product. As an antifouling method towards biofilms we studied the electrochemical polarization. Two novel instruments were designed for this work. The double biofilm analyzer was designed for search for a polarization program that would eradicate D. geothermalis biofilm or from stainless steel under conditions simulating paper mill environment. The Radbox instrument was designed to study the generation of reactive oxygen species during the polarization that was effective in antifouling of D. geothermalis. We found that cathodic character and a pulsed mode of polarization were required to achieve detaching D. geothermalis biofilm from stainless steel. We also found that the efficiency of polarization was good on submerged, and poor on splash area biofilms. By adding oxidative biocides, bromochloro-5,5-dimethylhydantoin, 2,2-dibromo-2-cyanodiacetamide or peracetic acid gave additive value with polarization, being active on splash area biofilms. We showed that the cathodically weighted pulsed polarization that was active in removing D. geothermalis was also effective in generation of reactive oxygen species. It is possible that the antifouling effect relied on the generation of ROS on the polarized steel surfaces. Antifouling method successful towards D. geothermalis that is a tenacious biofouler and possesses a high tolerance to oxidative stressors could be functional also towards other biofoulers and applicable in wet industrial processes elsewhere.

Ways of Explaining Workplace Bullying: A Review of Enabling, Motivating, and Precipitating Structures and Processes in the Work Environment

This paper summarizes literature explaining workplace bullying and focuses on organisational antecedents of bullying. In order to better understand the logic behind bullying, a model discussing different types of explanations is put forward. Thus, explanations for and factors associated with bullying are classified into three groups, i.e. enabling structures or necessary antecedents (e.g. perceived power imbalances, low perceived costs, and dissatisfaction and frustration), motivating structures or incentives (e.g. internal competition, reward systems, and expected benefits), and precipitating processes or triggering circumstances (e.g. downsizing and restructuring, organisational changes, changes in the composition of the workgroup). The paper concludes that bullying is often an interaction between structures and processes from all three groupings.

Multiple Perspectives on Networks: Conceptual Development, Application and Integration in an Entrepreneurial Context

Multiple Perspectives on Networks: Conceptual Development, Application and Integration in an Entrepreneurial Context. The purpose of this thesis is to enhance cross-fertilization between three different approaches to network research. The business network approach may contribute in terms of how relationships are created, developed and how tie content changes within ties, not only between them. The social network approach adds to the discussion by offering concepts of structural change on a network level. The network approach in entrepreneurship contributes by emphasizing network content, governance and structure as a way of understanding and capturing networks. This is discussed in the conceptual articles, Articles 2 and 3. The ultimate purpose of this thesis is to develop a theoretical and empirical understanding of network development processes. This is fulfilled by presenting a theoretical framework, which offers multiple views on process as a developmental outcome. The framework implies that change ought to be captured both within and among relationships over time in the firm as well as in the network. Consequently, changes in structure and interaction taking place simultaneously need to be included when doing research on network development. The connection between micro and macro levels is also stressed. Therefore, the entrepreneur or firm level needs to be implemented together with the network level. The surrounding environment impacts firm and network development and vice versa and hence needs to be integrated. Further, it is necessary to view network development not only as a way forward but to include both progression and regression as inevitable parts of the process. Finally, both stability and change should be taken into account as part of network development. Empirical results in Article 1 show support for a positive impact of networks on SME internationalization. Article 4 compares networks of novice, serial and portfolio entrepreneurs but the empirical results show little support for differences in the networks by type of entrepreneur. The results demonstrate that network interaction and structure is not directly impacted by type of entrepreneur involved. It indicates instead that network structure and interaction is more impacted by the development phase of the firm. This in turn is in line with the theoretical implications, stating that the development of the network and the firm impacts each other, as they co-evolve.

Vision based indoor positioning in a retail environment

Modern smart phones often come with a significant amount of computational power and an integrated digital camera making them an ideal platform for intelligents assistants. This work is restricted to retail environments, where users could be provided with for example navigational in- structions to desired products or information about special offers within their close proximity. This kind of applications usually require information about the user's current location in the domain environment, which in our case corresponds to a retail store. We propose a vision based positioning approach that recognizes products the user's mobile phone's camera is currently pointing at. The products are related to locations within the store, which enables us to locate the user by pointing the mobile phone's camera to a group of products. The first step of our method is to extract meaningful features from digital images. We use the Scale- Invariant Feature Transform SIFT algorithm, which extracts features that are highly distinctive in the sense that they can be correctly matched against a large database of features from many images. We collect a comprehensive set of images from all meaningful locations within our domain and extract the SIFT features from each of these images. As the SIFT features are of high dimensionality and thus comparing individual features is infeasible, we apply the Bags of Keypoints method which creates a generic representation, visual category, from all features extracted from images taken from a specific location. A category for an unseen image can be deduced by extracting the corresponding SIFT features and by choosing the category that best fits the extracted features. We have applied the proposed method within a Finnish supermarket. We consider grocery shelves as categories which is a sufficient level of accuracy to help users navigate or to provide useful information about nearby products. We achieve a 40% accuracy which is quite low for commercial applications while significantly outperforming the random guess baseline. Our results suggest that the accuracy of the classification could be increased with a deeper analysis on the domain and by combining existing positioning methods with ours.

Les fleuves dans l'œuvre romanesque de Jean-Marie Gustave Le Clézio

Relying on Merleau-Ponty's phenomenology of perception and on Mircea Eliade's works on the Sacred and the Profane, this study explores the river as a perceptual space and as the sacred Center in a cosmic vision of the world in twelve of Jean-Marie Gustave Le Clézio's fictional works, from The Interrogation (1963) to Revolutions (2003). In the first chapter, after introducing the field of study, I discuss the relation between the radical subjectivity and the evasiveness of perceiving subjects in Le Clézio's fiction. Next are some thoughts on the relation between Merleau-Ponty's and Le Clézio's ideas. The second chapter studies the river as an experience in the text, first as a topographical space, then as a sound world. The investigations move on to its water as a visual and a tactile phenomenon. Then follows the human use of the river, the (absence of) baths, and the river as a traveling space. The chapter closes with the study of the metaphorical use of the word, occurring mainly in urban space and for phenomena in the sky. The third chapter is organized around the river as the Center of the world in a religious cosmogony, where the river represents the origin of the world and of the human race. The core analysis shows how the middle of the river is a symbolic space of a new beginning. As a sacred space, the river abolishes time as the object of contemplation and as relative immobility from the point of view of a person drifting downstream. The functions of a new beginning and of abolition of time are combined in the symbolic immersions in the water. Finally, the dissertation explores other symbolical spaces, such as the unknown destination of the drift, and the river as the Center of a utopia. The chapter closes with the existential agony as a result of the elimination of the Center in the urban environment. In the final chapter, the river is compared to other watercourses : the creek, the brook and the rapids. The river is more of a spatial entity, whereas the actual water is more important in the smaller watercourses. The river is more common than the other watercourses as a topographical element in the landscape, whereas the minor watercourses invite the characters to a closer contact with their element, in immersions and in drinking their water. Finally, the work situates the rivers in a broader context of different fictional spaces in Le Clézio's text.