14 resultados para Wood longitudinal modulus of elasticity
em Helda - Digital Repository of University of Helsinki
Resumo:
Three different Norway spruce cutting clones growing in three environments with different soil and climatic conditions were studied. The purpose was to follow variation in the radial growth rate, wood properties and lignin content and to modify wood lignin with a natural monolignol, coniferyl alcohol, by making use of inherent wood peroxidases. In addition, the incorporation of chlorinated anilines into lignin was studied with synthetic model compounds and synthetic lignin preparations to show whether unnatural compounds originating from pesticides could be bound in the lignin polymer. The lignin content of heartwood, sapwood and earlywood was determined by applying Fourier transform infrared (FTIR) spectroscopy and a principal component regression (PCR) technique. Wood blocks were treated with coniferyl alcohol by using a vacuum impregnation method. The effect of impregnation was assessed by FTIR and by a fungal decay test. Trees from a fertile site showed the highest growth rate and sapwood lignin content and the lowest latewood proportion, weight density and modulus of rupture (MOR). Trees from a medium fertile site had the lowest growth rate and the highest latewood proportion, weight density, modulus of elasticity (MOE) and MOR. The most rapidly growing clone showed the lowest latewood proportion, weight density, MOE and MOR. The slowest growing clone had the lowest sapwood lignin content and the highest latewood proportion, weight density, MOE and MOR. Differences between the sites and clones were small, while fairly large variation was found between the individual trees and growing seasons. The cutting clones maintained clone-dependent wood properties in the different growing sites although variation between trees was high and climatic factors affected growth. The coniferyl alcohol impregnation increased the content of different lignin-type phenolic compounds in the wood as well as wood decay resistance against a white-rot fungus, Coriolus versicolor. During the synthetic lignin preparation 3,4-dichloroaniline became bound by a benzylamine bond to β-O-4 structures in the polymer and it could not be released by mild acid hydrolysis. The natural monolignol, coniferyl alcohol, and chlorinated anilines could be incorporated into the lignin polymer in vivo and in vitro, respectively.
Resumo:
The structure and the mechanical properties of wood of Norway spruce (Picea abies [L.] Karst.) were studied using small samples from Finland and Sweden. X-ray diffraction (XRD) was used to determine the orientation of cellulose microfibrils (microfibril angle, MFA), the dimensions of cellulose crystallites and the average shape of the cell cross-section. X-ray attenuation and x-ray fluorescence measurements were used to study the chemical composition and the trace element content. Tensile testing with in situ XRD was used to characterise the mechanical properties of wood and the deformation of crystalline cellulose within the wood cell walls. Cellulose crystallites were found to be 192 284 Å long and 28.9 33.4 Å wide in chemically untreated wood and they were longer and wider in mature wood than in juvenile wood. The MFA distribution of individual Norway spruce tracheids and larger samples was asymmetric. In individual cell walls, the mean MFA was 19 30 degrees, while the mode of the MFA distribution was 7 21 degrees. Both the mean MFA and the mode of the MFA distribution decreased as a function of the annual ring. Tangential cell walls exhibited smaller mean MFA and mode of the MFA distribution than radial cell walls. Maceration of wood material caused narrowing of the MFA distribution and removed contributions observed at around 90 degrees. In wood of both untreated and fertilised trees, the average shape of the cell cross-section changed from circular via ambiguous to rectangular as the cambial age increased. The average shape of the cell cross-section and the MFA distribution did not change as a result of fertilisation. The mass absorption coefficient for x-rays was higher in wood of fertilised trees than in that of untreated trees and wood of fertilised trees contained more of the elements S, Cl, and K, but a smaller amount of Mn. Cellulose crystallites were longer in wood of fertilised trees than in that of untreated trees. Kraft cooking caused widening and shortening of the cellulose crystallites. Tensile tests parallel to the cells showed that if the mean MFA is initially around 10 degrees or smaller, no systematic changes occur in the MFA distribution due to strain. The role of mean MFA in defining the tensile strength or the modulus of elasticity of wood was not as dominant as that reported earlier. Crystalline cellulose elongated much less than the entire samples. The Poisson ratio νca of crystalline cellulose in Norway spruce wood was shown to be largely dependent on the surroundings of crystalline cellulose in the cell wall, varying between -1.2 and 0.8. The Poisson ratio was negative in kraft cooked wood and positive in chemically untreated wood. In chemically untreated wood, νca was larger in mature wood and in latewood compared to juvenile wood and earlywood.
Resumo:
Early-onset psychiatric illnesses effects scatter to academic achievements as well as functioning in familial and social environments. From a public health point of view, depressive disorders are the most significant mental health disorders that begin in adolescence. Using prospective and longitudinal design, this study aimed to increase the understanding of early-onset depressive disorders, related mental health disorders and developing substance use in a large population-derived sample of adolescent Finnish twins. The participants of this study, FinnTwin12, an ongoing longitudinal population-based study, came from Finnish families with twins born in 1983-87 (exhaustive of five birth cohorts, identified from Finland s Central Population Register). With follow-up ongoing at age 20-24, this thesis assessed adolescent mental health in the first three waves, starting from baseline age 11-12 to follow-ups at age 14 and 17½. Some 5600 twins participated in questionnaire assessments of a wide range of health related behaviors. Mental health was further assessed among an intensively studied subsample of 1852 adolescents, who completed also professionally administered interviews at age 14, which provided data for full DSM-IV/III-R (Diagnostic and Statistical Manual for Mental Health disorders, 4th and 3rd editions) diagnoses. The participation rates of the study were 87-92%. The results of the study suggest, that the diagnostic criteria for major depressive disorder (MDD) may not capture youth with clinically significant early-onset depressive conditions outside clinical settings. Milder cases of depression, namely adolescents fulfilling the diagnostic criteria for minor depressive disorder, a qualitatively similar condition to MDD with fewer symptoms are also associated with marked suicidal thoughts, plans and attempts, recurrences and a high degree of comorbidity. Prospectively and longitudinally, early-onset depressive disorders were of substantial importance in the context of other mental health disorders and substance use behaviors: These data from a large population-derived sample established a substantial overlap between early-onset depressive disorders and attention deficit hyperactivity disorder in adolescent females, both of them significantly predictive for development of substance use among girls. Only in females baseline DSM-IV ADHD symptoms were strong predictors of alcohol abuse and dependence and illicit drug use at age 14 and frequent alcohol use and illicit drug use at age 17.½ when conduct disorder and previous substance use were controlled for. Early-onset depressive disorders were also prospectively and longitudinally associated to daily smoking behavior, smokeless tobacco use, frequent alcohol use and illicit drug use and eating disorders. Analysis of discordant twins suggested that these predictive associations were independent of familial confounds, such as family income, structure and parental models. In sum, early-onset depressive disorders predict subsequent involvement of substance use and psychiatric morbidity. A heightened risk for substance use is substantial also among those depressed below categorical diagnosis of MDD. Whether early recognition and interventions among these young people hold potential for substance use prevention further in their lives has potential public health significance and calls for more research. Data from this population-derived sample with balanced representation of boys and girls, suggested that boys and girls with ADHD behaviors may differ from each other in their vulnerability to substance use and depressive disorders: the data suggest more adverse substance use outcome for girls that was not attenuated by conduct disorder or previous substance use. Further, the prospective associations of early-onset depressive disorders and future elevated levels of addictive substance use is not explained by familial factors supporting future substance use, which could have important implications for substance use prevention.
Resumo:
The goal of this research was to survey the self-concept and school achievement of pupils with cleft lip, cleft palate or both from juvenile age to adolescence. Longitudinal researches of self-concept and school achievement among pupils with cleft lip, cleft palate or both are uncommon. This research was the first longitudinal research ever conducted in Finland among this population. This research can be considered to be a special educational study because of the target group involved. Self-concept consists of the person s entire personality. Personality is biological and deterministic. Self-concept includes concepts, attitudes and feelings that the person has about him or her qualities, abilities and relations to the environment. The individual associates experiences to this personality with earlier observations through the social interaction. The individual will have the consciousness of the person s existence and action. The target group in this study consisted of Finnish children with clefts, who were comprised of four different age groups. The questionnaire was sent to all subjects (N1 = 419) both times. A total of 74 % of children returned the questionnaire in 1988 (N2=305). 48 % of children returned the questionnaire in 1993 (N3=203). 42% of children returned the questionnaire both times (N4=175) . These 175 children formed the research subjects. The survey was conducted in 1988, and again in 1993. In 1988, the pupils surveyed were 9 to 12 years of age, while in 1993 they were between 14 and 17 years old. The data was collected through the use of a questionnaire, which consisted of common questions and a personality inventory test that was developed for Finnish students by professor Maija-Liisa Rauste-von Wright. Quantitative analysis methods were used to examine the structure of self-concept and school achievement. Structures found in this research were observed in relation to disorder, gender and maturation. According to these results, structures of self-concepts and school achievement are in fact stable. Basic self-concept elements are seen to be formed at an early age. The developmental aspects of self-concept following puberty are observed as the stability of self-concept and as the forming of a general self. The level of school achievement is stable, but the structure of school achievement changes. From these results, it is possible to state that the gender of the child has a statistical significance regarding self-concept and school achievement. However, the experienced disorder does not have statistical significance as regards to self-concept and school achievement. Results of self-concept support the research of self-concept conducted earlier in Finland.
Resumo:
The purpose of this study was to extend understanding of how large firms pursuing sustained and profitable growth manage organisational renewal. A multiple-case study was conducted in 27 North American and European wood-industry companies, of which 11 were chosen for closer study. The study combined the organisational-capabilities approach to strategic management with corporate-entrepreneurship thinking. It charted the further development of an identification and classification system for capabilities comprising three dimensions: (i) the dynamism between firm-specific and industry-significant capabilities, (ii) hierarchies of capabilities and capability portfolios, and (iii) their internal structure. Capability building was analysed in the context of the organisational design, the technological systems and the type of resource-bundling process (creating new vs. entrenching existing capabilities). The thesis describes the current capability portfolios and the organisational changes in the case companies. It also clarifies the mechanisms through which companies can influence the balance between knowledge search and the efficiency of knowledge transfer and integration in their daily business activities, and consequently the diversity of their capability portfolio and the breadth and novelty of their product/service range. The largest wood-industry companies of today must develop a seemingly dual strategic focus: they have to combine leading-edge, innovative solutions with cost-efficient, large-scale production. The use of modern technology in production was no longer a primary source of competitiveness in the case companies, but rather belonged to the portfolio of basic capabilities. Knowledge and information management had become an industry imperative, on a par with cost effectiveness. Yet, during the period of this research, the case companies were better in supporting growth in volume of the existing activity than growth through new economic activities. Customer-driven, incremental innovation was preferred over firm-driven innovation through experimentation. The three main constraints on organisational renewal were the lack of slack resources, the aim for lean, centralised designs, and the inward-bound communication climate.
Resumo:
Basidiomycetous white-rot fungi are the only organisms that can efficiently decompose all the components of wood. Moreover, white-rot fungi possess the ability to mineralize recalcitrant lignin polymer with their extracellular, oxidative lignin-modifying enzymes (LMEs), i.e. laccase, lignin peroxidase (LiP), manganese peroxidase (MnP), and versatile peroxidase (VP). Within one white-rot fungal species LMEs are typically present as several isozymes encoded by multiple genes. This study focused on two effi cient lignin-degrading white-rot fungal species, Phlebia radiata and Dichomitus squalens. Molecular level knowledge of the LMEs of the Finnish isolate P. radiata FBCC43 (79, ATCC 64658) was complemented with cloning and characterization of a new laccase (Pr-lac2), two new LiP-encoding genes (Pr-lip1, Pr-lip4), and Pr-lip3 gene that has been previously described only at cDNAlevel. Also, two laccase-encoding genes (Ds-lac3, Ds-lac4) of D. squalens were cloned and characterized for the first time. Phylogenetic analysis revealed close evolutionary relationships between the P. radiata LiP isozymes. Distinct protein phylogeny for both P. radiata and D. squalens laccases suggested different physiological functions for the corresponding enzymes. Supplementation of P. radiata liquid culture medium with excess Cu2+ notably increased laccase activity and good fungal growth was achieved in complex medium rich with organic nitrogen. Wood is the natural substrate of lignin-degrading white-rot fungi, supporting production of enzymes and metabolites needed for fungal growth and the breakdown of lignocellulose. In this work, emphasis was on solid-state wood or wood-containing cultures that mimic the natural growth conditions of white-rot fungi. Transcript analyses showed that wood promoted expression of all the presently known LME-encoding genes of P. radiata and laccase-encoding genes of D. squalens. Expression of the studied individual LME-encoding genes of P. radiata and D. squalens was unequal in transcript quantities and apparently time-dependent, thus suggesting the importance of several distinct LMEs within one fungal species. In addition to LMEs, white-rot fungi secrete other compounds that are important in decomposition of wood and lignin. One of these compounds is oxalic acid, which is a common metabolite of wood-rotting fungi. Fungi produce also oxalic-acid degrading enzymes of which the most widespread is oxalate decarboxylase (ODC). However, the role of ODC in fungi is still ambiguous with propositions from regulation of intra and extracellular oxalic acid levels to a function in primary growth and concomitant production of ATP. In this study, intracellular ODC activity was detected in four white-rot fungal species, and D. squalens showed the highest ODC activity upon exposure to oxalic acid. Oxalic acid was the most common organic acid secreted by the ODC-positive white-rot fungi and the only organic acid detected in wood cultures. The ODC-encoding gene Ds-odc was cloned from two strains of D. squalens showing the first characterization of an odc-gene from a white-rot polypore species. Biochemical properties of the D. squalens ODC resembled those described for other basidiomycete ODCs. However, the translated amino acid sequence of Ds-odc has a novel N-terminal primary structure with a repetitive Ala-Ser-rich region of ca 60 amino acid residues in length. Expression of the Ds-odc transcripts suggested a constitutive metabolic role for the corresponding ODC enzyme. According to the results, it is proposed that ODC may have an essential implication for the growth and basic metabolism of wood-decaying fungi.
Resumo:
The research analyzes product quality from a customer perspective in the case of the wood products industry. Of specific interest is to understand better how environmental quality is perceived from a customer perspective. The empirical material used comprises four data-sets from Finland, Germany and the UK, collected during 1992 2004. The methods consist of a set of quantitative statistical analyses. The results indicate that perceived quality from a customer perspective can be presented using a multidimensional and hierarchical construct with tangible and intangible dimensions, that is common to different markets and products. This applies in the case of wood products but also more generally at least for some other construction materials. For wood products, tangible product quality has two main sub-dimensions: technical quality and appearance. For product intangibles, a few main quality dimensions seem be detectable: Quality of intangibles related to the physical product, such as environmental issues and product-related information, supplier-related characteristics, and service and sales personnel behavior. Environmental quality and information are often perceived as being inter-related. Technical performance and appearance are the most important considerations for customers in the case of wood products. Organizational customers in particular also clearly consider certain intangible quality dimensions to be important, such as service and supplier reliability. The high technical quality may be considered as a license to operate , but product appearance and intangible quality provide potential for differentiation for attracting certain market segments. Intangible quality issues are those where Nordic suppliers underperform in comparison to their Central-European competitors on the important German markets. Environmental quality may not have been used to its full extent to attract customers. One possibility is to increase the availability of the environment-related information, or to develop environment-related product characteristics to also provide some individual benefits. Information technology provides clear potential to facilitate information-based quality improvements, which was clearly recognized by Finnish forest industry already in the early 1990s. The results indeed indicate that wood products markets are segmented with regard to quality demands
Resumo:
Linear optimization model was used to calculate seven wood procurement scenarios for years 1990, 2000 and 2010. Productivity and cost functions for seven cutting, five terrain transport, three long distance transport and various work supervision and scaling methods were calculated from available work study reports. All method's base on Nordic cut to length system. Finland was divided in three parts for description of harvesting conditions. Twenty imaginary wood processing points and their wood procurement areas were created for these areas. The procurement systems, which consist of the harvesting conditions and work productivity functions, were described as a simulation model. In the LP-model the wood procurement system has to fulfil the volume and wood assortment requirements of processing points by minimizing the procurement cost. The model consists of 862 variables and 560 restrictions. Results show that it is economical to increase the mechanical work in harvesting. Cost increment alternatives effect only little on profitability of manual work. The areas of later thinnings and seed tree- and shelter wood cuttings increase on cost of first thinnings. In mechanized work one method, 10-tonne one grip harvester and forwarder, is gaining advantage among other methods. Working hours of forwarder are decreasing opposite to the harvester. There is only little need to increase the number of harvesters and trucks or their drivers from today's level. Quite large fluctuations in level of procurement and cost can be handled by constant number of machines, by alternating the number of season workers and by driving machines in two shifts. It is possible, if some environmental problems of large scale summer time harvesting can be solved.
Resumo:
The strong tendency of elderly employees to retire early and the simultaneous aging of the population have been major topics of policy and scientific debate. A key concern has been the financing of future pension schemes and possible labour shortage, especially in social and health services within the public sector. The aging of the population is inevitable, but efforts can be made to prevent or postpone early exit from the labour force, e.g., by identifying and intervening in the factors that contribute to the process of early retirement due to disability. The associations of intentions to retire early, poor mental health and different psychosocial factors with the process of disability retirement are still poorly understood. The purpose of this study was to investigate the associations of intentions to retire early, poor mental health, work and family related psychosocial factors and experiences of earlier life stages with the process of disability retirement. The data were derived from the Helsinki Health Study (HHS, N=8960) and the Health and Social Support Study (HeSSup, N=25 901). The Helsinki Health Study is an ongoing employee cohort study among middle-aged women and men. The Health and Social Support Study is an ongoing longitudinal study of a working-age sample representative of the Finnish population. The analyses were restricted to respondents 40 years of age or older. Age and gender adjusted prevalence and incidence rates were calculated. Associations were studied by using logistic, multinomial and Cox regression. Strong intentions to retire early were common among employees. Poor mental health, unfavourable working conditions and work-to-family conflicts were clearly associated with increased intentions to retire early. Strong intentions to retire early predicted disability retirement. Risk of disability retirement increased in a dose-response manner with increasing number of childhood adversities. Poor mental and somatic health, life dissatisfaction, heavy alcohol consumption, current smoking, obesity and low socioeconomic status were also predictors of disability retirement. The impact of poor mental health and adverse experiences from earlier life stages, work and family related psychosocial factors, e.g., work-family interface, the subjective experience of well-being and health related risk behaviours on the process of disability retirement should be recognised. Preventive measures against disability retirement should be launched before subjective experience of ill health, work disability and strong intentions to retire early emerge.
Resumo:
White-rot fungi are wood degrading organisms that are able to decompose all wood polymers; lignin, cellulose and hemicellulose. Especially the selective white-rot fungi that decompose preferentially wood lignin are promising for biopulping applications. In biopulping the pretreatment of wood chips with white-rot fungi enhances the subsequent pulping step and substantially reduces the refining energy consumption in mechanical pulping. Because it is not possible to carry out biopulping in industrial scale as a closed process it has been necessary to search for new selective strains of white-rot fungi which naturally occur in Finland and cause selective white-rot of Finnish wood raw-material. In a screening of 300 fungal strains a rare polypore, Physisporinus rivulosus strain T241i isolated from a forest burn research site, was found to be a selective lignin degrader and promising for the use in biopulping. Since selective lignin degradation is apparently essential for biopulping, knowledge on lignin-modifying enzymes and the regulation of their production by a biopulping fungus is needed. White-rot fungal enzymes that participate in lignin degradation are laccase, lignin peroxidase (LiP), manganese peroxidase (MnP), versatile peroxidase (VP) and hydrogen peroxide forming enzymes. In this study, P. rivulosus was observed to produce MnP, laccase and oxalic acid during growth on wood chips. In liquid cultures manganese and veratryl alcohol increased the production of acidic MnP isoforms detected also in wood chip cultures. Laccase production by P. rivulosus was low unless the cultures were supplemented with sawdust and charred wood, the components of natural growth environment of the fungus. In white-rot fungi the lignin-modifying enzymes are typically present as multiple isoforms. In this study, two MnP encoding genes, mnpA and mnpB, were cloned and characterized from P. rivulosus T241i. Analysis of the N-terminal amino acid sequences of two purified MnPs and putative amino acid sequence of the two cloned mnp genes suggested that P. rivulosus possesses at least four mnp genes. The genes mnpA and mnpB markedly differ from each other by the gene length, sequence and intron-exon structure. In addition, their expression is differentially affected by the addition of manganese and veratryl alcohol. P. rivulosus produced laccase as at least two isoforms. The results of this study revealed that the production of MnP and laccase was differentially regulated in P. rivulosus, which ensures the efficient lignin degradation under a variety of environmental conditions.
Resumo:
In this thesis we consider the phenomenology of supergravity, and in particular the particle called "gravitino". We begin with an introductory part, where we discuss the theories of inflation, supersymmetry and supergravity. Gravitino production is then investigated into details, by considering the research papers here included. First we study the scattering of massive W bosons in the thermal bath of particles, during the period of reheating. We show that the process generates in the cross section non trivial contributions, which eventually lead to unitarity breaking above a certain scale. This happens because, in the annihilation diagram, the longitudinal degrees of freedom in the propagator of the gauge bosons disappear from the amplitude, by virtue of the supergravity vertex. Accordingly, the longitudinal polarizations of the on-shell W become strongly interacting in the high energy limit. By studying the process with both gauge and mass eigenstates, it is shown that the inclusion of diagrams with off-shell scalars of the MSSM does not cancel the divergences. Next, we approach cosmology more closely, and study the decay of a scalar field S into gravitinos at the end of inflation. Once its mass is comparable to the Hubble rate, the field starts coherent oscillations about the minimum of its potential and decays pertubatively. We embed S in a model of gauge mediation with metastable vacua, where the hidden sector is of the O'Raifeartaigh type. First we discuss the dynamics of the field in the expanding background, then radiative corrections to the scalar potential V(S) and to the Kähler potential are calculated. Constraints on the reheating temperature are accordingly obtained, by demanding that the gravitinos thus produced provide with the observed Dark Matter density. We modify consistently former results in the literature, and find that the gravitino number density and T_R are extremely sensitive to the parameters of the model. This means that it is easy to account for gravitino Dark Matter with an arbitrarily low reheating temperature.