30 resultados para Web testing
em Helda - Digital Repository of University of Helsinki
Resumo:
The feasibility of different modern analytical techniques for the mass spectrometric detection of anabolic androgenic steroids (AAS) in human urine was examined in order to enhance the prevalent analytics and to find reasonable strategies for effective sports drug testing. A comparative study of the sensitivity and specificity between gas chromatography (GC) combined with low (LRMS) and high resolution mass spectrometry (HRMS) in screening of AAS was carried out with four metabolites of methandienone. Measurements were done in selected ion monitoring mode with HRMS using a mass resolution of 5000. With HRMS the detection limits were considerably lower than with LRMS, enabling detection of steroids at low 0.2-0.5 ng/ml levels. However, also with HRMS, the biological background hampered the detection of some steroids. The applicability of liquid-phase microextraction (LPME) was studied with metabolites of fluoxymesterone, 4-chlorodehydromethyltestosterone, stanozolol and danazol. Factors affecting the extraction process were studied and a novel LPME method with in-fiber silylation was developed and validated for GC/MS analysis of the danazol metabolite. The method allowed precise, selective and sensitive analysis of the metabolite and enabled simultaneous filtration, extraction, enrichment and derivatization of the analyte from urine without any other steps in sample preparation. Liquid chromatographic/tandem mass spectrometric (LC/MS/MS) methods utilizing electrospray ionization (ESI), atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization (APPI) were developed and applied for detection of oxandrolone and metabolites of stanozolol and 4-chlorodehydromethyltestosterone in urine. All methods exhibited high sensitivity and specificity. ESI showed, however, the best applicability, and a LC/ESI-MS/MS method for routine screening of nine 17-alkyl-substituted AAS was thus developed enabling fast and precise measurement of all analytes with detection limits below 2 ng/ml. The potential of chemometrics to resolve complex GC/MS data was demonstrated with samples prepared for AAS screening. Acquired full scan spectral data (m/z 40-700) were processed by the OSCAR algorithm (Optimization by Stepwise Constraints of Alternating Regression). The deconvolution process was able to dig out from a GC/MS run more than the double number of components as compared with the number of visible chromatographic peaks. Severely overlapping components, as well as components hidden in the chromatographic background could be isolated successfully. All studied techniques proved to be useful analytical tools to improve detection of AAS in urine. Superiority of different procedures is, however, compound-dependent and different techniques complement each other.
Resumo:
Solid materials can exist in different physical structures without a change in chemical composition. This phenomenon, known as polymorphism, has several implications on pharmaceutical development and manufacturing. Various solid forms of a drug can possess different physical and chemical properties, which may affect processing characteristics and stability, as well as the performance of a drug in the human body. Therefore, knowledge and control of the solid forms is fundamental to maintain safety and high quality of pharmaceuticals. During manufacture, harsh conditions can give rise to unexpected solid phase transformations and therefore change the behavior of the drug. Traditionally, pharmaceutical production has relied on time-consuming off-line analysis of production batches and finished products. This has led to poor understanding of processes and drug products. Therefore, new powerful methods that enable real time monitoring of pharmaceuticals during manufacturing processes are greatly needed. The aim of this thesis was to apply spectroscopic techniques to solid phase analysis within different stages of drug development and manufacturing, and thus, provide a molecular level insight into the behavior of active pharmaceutical ingredients (APIs) during processing. Applications to polymorph screening and different unit operations were developed and studied. A new approach to dissolution testing, which involves simultaneous measurement of drug concentration in the dissolution medium and in-situ solid phase analysis of the dissolving sample, was introduced and studied. Solid phase analysis was successfully performed during different stages, enabling a molecular level insight into the occurring phenomena. Near-infrared (NIR) spectroscopy was utilized in screening of polymorphs and processing-induced transformations (PITs). Polymorph screening was also studied with NIR and Raman spectroscopy in tandem. Quantitative solid phase analysis during fluidized bed drying was performed with in-line NIR and Raman spectroscopy and partial least squares (PLS) regression, and different dehydration mechanisms were studied using in-situ spectroscopy and partial least squares discriminant analysis (PLS-DA). In-situ solid phase analysis with Raman spectroscopy during dissolution testing enabled analysis of dissolution as a whole, and provided a scientific explanation for changes in the dissolution rate. It was concluded that the methods applied and studied provide better process understanding and knowledge of the drug products, and therefore, a way to achieve better quality.
Resumo:
Tämä tutkielma käsittelee World Wide Webin sisältämien verkkosivujen sisältöjen käyttöä korpusmaisesti kielitieteellisenä tutkimusaineistona. World Wide Web sisältää moninkertaisesti enemmän tekstiä kuin suurimmat olemassa olevat perinteiset tekstikorpukset, joten verkkosivuilta voi todennäköisesti löytää paljon esiintymiä sellaisista sanoista ja rakenteista, jotka ovat perinteisissä korpuksissa harvinaisia. Verkkosivuja voidaan käyttää aineistona kahdella eri tavalla: voidaan kerätä satunnainen otos verkkosivuista ja luoda itsenäinen korpus niiden sisällöistä, tai käyttää koko World Wide Webiä korpuksena verkkohakukoneiden kautta. Verkkosivuja on käytetty tutkimusaineistona monilla eri kielitieteen aloilla, kuten leksikograafisessa tutkimuksessa, syntaktisten rakenteiden tutkimuksessa, pedagogisena materiaalina ja vähemmistökielten tutkimuksessa. Verkkosivuilla on perinteisiin korpuksiin verrattuna useita haitallisia ominaisuuksia, jotka pitää ottaa huomioon, kun niitä käytetään aineistona. Kaikki sivut eivät sisällä kelvollista tekstiä, ja sivut ovat usein esimerkiksi HTML-muotoisia, jolloin ne pitää muuttaa helpommin käsiteltävissä olevaan muotoon. Verkkosivut sisältävät enemmän kielellisiä virheitä kuin perinteiset korpukset, ja niiden tekstityypit ja aihepiirit ovat runsaslukuisempia kuin perinteisten korpusten. Aineiston keräämiseen verkkosivuilta tarvitaan tehokkaita ohjelmatyökaluja. Näistä yleisimpiä ovat kaupalliset verkkohakukoneet, joiden kautta on mahdollista päästä nopeasti käsiksi suureen määrään erilaisia sivuja. Näiden lisäksi voidaan käyttää erityisesti kielitieteellisiin tarpeisiin kehitettyjä työkaluja. Tässä tutkielmassa esitellään ohjelmatyökalut WebCorp, WebAsCorpus.org, BootCaT ja Web as Corpus Toolkit, joiden avulla voi hakea aineistoa verkkosivuilta nimenomaan kielitieteellisiin tarkoituksiin.
Resumo:
The study of social phenomena in the World Wide Web has been rather fragmentary, andthere is no coherent, reseach-based theory about sense of community in Web environment. Sense of community means part of one's self-concept that has to do with perceiving oneself belonging to, and feeling affinity to a certain social grouping. The present study aimed to find evidence for sense of community in Web environment, and specifically find out what the most critical psychological factors of sense of community would be. Based on known characteristics of real life communities and sense of community, and few occational studies of Web-communities, it was hypothesized that the following factors would be the most critical ones and that they could be grouped as prerequisites, facilitators and consequences of sense of community: awareness and social presence (prerequisites), criteria for membership and borders, common purpose, social interaction and reciprocity, norms and conformity, common history (facilitators), trust and accountability (consequences). In addition to critical factors, the present study aimed to find out if this kind of grouping would be valid. Furthermore, the effect of Web-community members' background variables to sense of community was of interest. In order to answer the questions, an online-questionnaire was created and tested. It included propositions that reflect factors that precede, facilitate and follow the sense of community in Web environment. A factor analysis was calculated to find out the critical factors and analyses of variance were calculated to see if the grouping to prerequisites, facilitators and consequences was right and how the background variables would affect the sense of community in Web environment. The results indicated that the psychological structure of sense of community in Web environment could not be presented with critical variables grouped as prerequisites, facilitators and consequences. Most factors did facilitate the sense of community, but based on this data it could not be argued that some of the factors chronologically precedesense of community and some follow it. Instead, the factor analysis revealed that the most critical factors in sense of community in Web environment are 1) reciprocal involvement, 2) basic trust for others, 3) similarity and common purpose of members, and 4) shared history of members. The most influencing background variables were the member's own participation activity (indicated with reading and writing messages) and the phase in membership lifecycle (from visitor to leader). The more the member participated and the further in membership life cycle he was, the more he felt sense of community. There are many descreptions of sense of community, but the present study was one of the first to actually measure the phenomenon in Web environment, and that gained well documented, valid results based on large data, proving that sense of community in Web environment is possible, and clarifying its psychological structure, thus enhancing the understanding of sense of community in Web environment. Keywords: sense of community, Web-community, psychology of the Internet
Resumo:
Tutkimuksessa analysoidaan teoriatasolla web-avusteisen tiedontuottamisyhteistyön kokeilutoiminnassa esiin tulleita ongelmia ja kootaan niiden viitoittamana teoriaperustaa tulevaisuuden työskentelytavalle, tietämyksen web-avusteiselle ryhmäprosessoinnille. Keskiössä on ihminen kognitiivisena tiedonkäsittelijänä ja elinikäisenä oppijana. Organisaatiossa vallitsevat toimintastrategiat, ryhmätyöskentelyn organisointi ja ryhmässä toteutuvat käytännöt muodostavat yksilön toimintaa ohjaavan sosiaalisen toimintaympäristön, joka säätelee yhteistyöprosessin onnistumista. Yhteistyötä tarkastellaan sosiaalisen tiedonkäsittelyn ryhmäilmiönä, jossa käsite yhteistyökyky kyseenalaistuu. Tuotetussa teoriaperustassa ihminen nähdään monitasoisten oppimishaasteiden ristitulessa. Koulutuksessa vallitseva absoluuttinen tietokäsitys on pystyttävä muuttamaan konstruktivistiseksi tietokäsitykseksi: yhteistä tietämystä ryhmänä tuotettaessa yksilöiden tietämys on rakennusaineena. Koulussa saatu sosiaalisen tiedonkäsittelyn malli, itsekeskeisen tiedonkäsittelyn malli, ei sovellu tietämyksen ryhmäprosessointiin. Malliin liittyviä oppeja on poisopittava samalla kun ryhmäjäsenenä on suunniteltava ja yhdessä opeteltava ryhmäkeskeisiä ja web-avusteisia tiedonkäsittelymalleja. Näin yhteistyöprosessissa toteutuu rinnakkain asiaoppimista ja toimintaoppimista. Näitä molempia on tarpeen tukea kehitettäessä uudenlaisia web-avusteisia työskentelymenetelmiä. Osassa I esitellään tutkimuksen kokemusperäisiä virikkeitä. Suhteellisen tietokäsityksen mukaisesti tämä tutkimus on kiinteästi kytkeytynyt tutkijan elinikäiseen oppimiseen ja tutkimus kuvataan tutkijan yksilöllisen tietämyksen prosessointina. Tutkimusaiheen löytymiseen johtaneet käytännön havainnot aloittavat sen takia raportoinnin. Erityisesti koulun sosiaalisen tiedonkäsittelyn organisointi on tarkastelun kohteena. Osassa II hahmotetaan tutkimusnäkökulmaa. Tutkimuskysymykset ovat lähinnä viitoittamassa tietämyksen etsintää. Tutkimusmenetelmä, kokeilutoiminnan analysointi, on saanut vahvasti vaikutteita toimintatutkimuksesta. Tutkimusasetelman perustana on toimintaan kytkeytyvä ihmiskäsitys. Kirjallisuuden avulla etsitään mahdollisia kytkeytymiä ihmisen käyttäytymisen ja sosiaalisen toiminnan organisoinnin välillä. Osa III kuvailee tutkimusaihetta koskevan ymmärryksen prosessointia. Esiymmärrys yhteistyöstä ja yhteistyökäsitteen määrittely mahdollistavat kokeilutoimintaan ryhtymisen. Uusi viestintämahdollisuus (www) nähdään yhteisessä tiedonkäsittelyssä apuvälineenä. Käytännön kokeilujaksot tarjoavat aineksia kognitiivisen tiedonkäsittelyn syvällisten periaatteiden löytymiselle. Inhimillinen toiminta ja sosiaalinen tiedonkäsittely saavat teoriatason analysoinnissa oppimiseen perustuvia tulkintoja. Osassa IV esitellään tutkimuksen tavoitteena ollutta teoriaperustaa tietämyksen web-avusteiselle ryhmäprosessoinnille. Teoriatiivistelmässä keskiöön nousee ihmisen kognitiivinen tiedonkäsittely sekä konstruktivistisen asiaoppimisen että selviytymispainotteisen toimintaoppimisen muodossa. Sosiaalinen toimintaympäristö nähdään osallisena kognitiivisessa tiedonkäsittelyssä ja selityksenä sille, että yhteinen tiedonkäsittely ei onnistu pelkästään tietoverkkoympäristössä vaan tarvitaan myös sosiaalisia tapaamisia. Kokeilutoiminnan opetuksia tuodaan esille yhteistyöprosessin keskeisten tapahtumien tarkastelussa. Tuotettua teoriaperustaa koetellaan tieteen kentällä vertailemalla sitä muiden tutkijoiden julkaisemiin käsityksiin. Tietoverkkoteknologian suhdetta inhimilliseen tiedonkäsittelyyn verrataan muualla saatuihin ja julkaistuihin käsityksiin. Avainsanat: tietointensiivinen yhteistyö, tiedontuottamisyhteistyö, yhteistyöprosessi, yhteistyökyky, yhteistyökyvyttömyys, virtuaalinen yhteistyöorganisaatio, yksilöllinen tietämys, yhteisen ymmärryksen etsintä, yhteinen tietämys, kognitiivinen tiedonkäsittely, asiaoppiminen, toimintaoppiminen, sosiaalinen tiedonkäsittely, sosiaalinen toimintaympäristö, automatisoitunut toimintamalli, yksilökeskeinen toimintamalli, itsekeskeinen toimintamalli, ryhmäkeskeinen toimintamalli, sosiaalisen tiedonkäsittelyn toimintastrategia, työympäristössä oppiminen.
Resumo:
The purpose of the study was to develop a functional web-based learning material for the learning of the nålbinding technique. The study of the research topic was already begun in my pedagogical thesis in 2008 by considering the demands on pedagogic material for the teaching of the technique. This study falls into the field of qualitative design research which was carried out through three stages. In the study three methods of usability testing, i.e. expert analysis, the informants’ thinking aloud and interviews, were used as research methods. At the first stage of the study the first version of the learning material was created. This was done on the basis of theoretical knowledge, the demands set on learning materials as clarified in previous studies, on the basis of previously created learning materials for the learning of the nålbinding technique as well as with the help of two experts on the technique. At the second stage, the learning material was developed on the basis of expert analysis and another version of the material was created. At the third stage, usability testing was carried out on the material. At this stage two informants used the material, practiced stitching with the nålbinding needle and thought aloud while doing so. In the usability testing the Morae –programme was used to record the events on the screen, the actions of the informants and their spoken out thoughts. The Morae –programme was also used when analysing the recordings. After the testing, the informants practised stitching independently and in a few weeks time they were interviewed. The interviews were aimed at finding out the informants’ opinions on the future development of the material. On the basis of the informants’ independent attempts at using the nålbinding technique, the development of their skills after the testing was also discussed at the interviews. The development of the learning material will continue after this study on the basis of the usability testing and the interviews. The web-based learning material was created for the website Käspaikka in the address www.kaspaikka.fi/kinnasneula. By creating a multimodal learning material the dual-coding theory by Paivio was taken into consideration. According to the theory, several methods of presentation help a learner to restore information in his/her memory. The independent construction of the learner’s knowledge, i.e. learning according to the principles of the constructivist learning theory, was also supported by creating a logical navigation system, by linking interrelated topics to one another and by presenting the topics in several different forms. In the test situations the learning material was judged to work well when practising stitching with the nålbinding needle. Both informants learned the basics of the nålbinding technique even though their respective learning strategies were quite different. In the usability testing illogicalities and shortcomings were still noticed in the learning material which will still be further developed in the future.
Design and testing of stand-specific bucking instructions for use on modern cut-to-length harvesters
Resumo:
This study addresses three important issues in tree bucking optimization in the context of cut-to-length harvesting. (1) Would the fit between the log demand and log output distributions be better if the price and/or demand matrices controlling the bucking decisions on modern cut-to-length harvesters were adjusted to the unique conditions of each individual stand? (2) In what ways can we generate stand and product specific price and demand matrices? (3) What alternatives do we have to measure the fit between the log demand and log output distributions, and what would be an ideal goodness-of-fit measure? Three iterative search systems were developed for seeking stand-specific price and demand matrix sets: (1) A fuzzy logic control system for calibrating the price matrix of one log product for one stand at a time (the stand-level one-product approach); (2) a genetic algorithm system for adjusting the price matrices of one log product in parallel for several stands (the forest-level one-product approach); and (3) a genetic algorithm system for dividing the overall demand matrix of each of the several log products into stand-specific sub-demands simultaneously for several stands and products (the forest-level multi-product approach). The stem material used for testing the performance of the stand-specific price and demand matrices against that of the reference matrices was comprised of 9 155 Norway spruce (Picea abies (L.) Karst.) sawlog stems gathered by harvesters from 15 mature spruce-dominated stands in southern Finland. The reference price and demand matrices were either direct copies or slightly modified versions of those used by two Finnish sawmilling companies. Two types of stand-specific bucking matrices were compiled for each log product. One was from the harvester-collected stem profiles and the other was from the pre-harvest inventory data. Four goodness-of-fit measures were analyzed for their appropriateness in determining the similarity between the log demand and log output distributions: (1) the apportionment degree (index), (2) the chi-square statistic, (3) Laspeyres quantity index, and (4) the price-weighted apportionment degree. The study confirmed that any improvement in the fit between the log demand and log output distributions can only be realized at the expense of log volumes produced. Stand-level pre-control of price matrices was found to be advantageous, provided the control is done with perfect stem data. Forest-level pre-control of price matrices resulted in no improvement in the cumulative apportionment degree. Cutting stands under the control of stand-specific demand matrices yielded a better total fit between the demand and output matrices at the forest level than was obtained by cutting each stand with non-stand-specific reference matrices. The theoretical and experimental analyses suggest that none of the three alternative goodness-of-fit measures clearly outperforms the traditional apportionment degree measure. Keywords: harvesting, tree bucking optimization, simulation, fuzzy control, genetic algorithms, goodness-of-fit
Resumo:
The Ajax approach has outgrown its origin as shorthand for "Asynchronous JavaScript + XML". Three years after its naming, Ajax has become widely adopted by web applications. Therefore, there exists a growing interest in using those applications with mobile devices. This thesis evaluates the presentational capability and measures the performance of five mobile browsers on the Apple iPhone and Nokia models N95 and N800. Performance is benchmarked through user-experienced response times as measured with a stopwatch. 12 Ajax toolkit examples and 8 production-quality applications are targeted, all except one in their real environments. In total, over 1750 observations are analyzed and included in the appendix. Communication delays are not considered; the network connection type is WLAN. Results indicate that the initial loading time of an Ajax application can often exceed 20 seconds. Content reordering may be used to partially overcome this limitation. Proper testing is the key for success: the selected browsers are capable of presenting Ajax applications if their differing implementations are overcome, perhaps using a suitable toolkit.
Resumo:
Usability testing is a productive and reliable method for evaluating the usability of software. Planning and implementing the test and analyzing its results is typically considered time-consuming, whereas applying usability methods in general is considered difficult. Because of this, usability testing is often priorized lower than more concrete issues in software engineering projects. Intranet Alma is a web service, users of which consist of students and personnel of the University of Helsinki. Alma was published in 2004 at the opening ceremony of the university. It has 45 000 users, and it replaces several former university network services. In this thesis, the usability of intranet Alma is evaluated with usability testing. The testing method applied has been lightened to make its taking into use as easy as possible. In the test, six students each tried to solve nine test tasks with Alma. As a result concrete usability problems were described in the final test report. Goal-orientation was given less importance in the applied usability testing. In addition, the system was tested only with test users from the largest user group. Usability test found general usability problems that occurred no matter the task or the user. However, further evaluation needs to be done: in addition to the general usability problems, there are task-dependent problems, solving of which requires thorough gathering of users goals. In the basic structure and central functionality of Alma, for example in navigation, there are serious and often repeating usability problems. It would be of interest to verify the designed user interface solutions to these problems before taking them into use. In the long run, the goals of the users, that the software is planned to support, are worth gathering, and the software development should be based on these goals.
Resumo:
Tutkielmassa käsitellään luottamuksenhallintaa web-palveluympäristössä. Dynaaminen toimintaympäristö asettaa vaatimuksia luottamuksenhallintajärjestelmälle, jota käytetään paitsi paikallisten pääsynhallintapäätösten tekemiseen, myös laajemman mittakaavan päätöksenteon tukena, useiden autonomisten toimijoiden muodostamien yhteisöjen hallinnassa. Tutkielma esittelee Trust Based on Evidence -projektissa kehitetyn luottamuksenhallintajärjestelmän tiedollisen ja toiminnallisen mallin, paikallisesta ja yhteisön näkökulmasta. Mallia selkeytetään web-palveluympäristöön sijoittuvan esimerkin avulla. Luottamuksen käsitteen rakentamiseksi esitellään myös eri osa-alueille sijoittuvia luottamuksen malleja ja luottamusta käyttäviä järjestelmiä. Avoimessa verkkoympäristössä palveluntarjoaja joutuu tasapainottelemaan kahden osin vastakkaisen tavoitteen välillä: toisaalta järjestelmän tulisi olla mahdollisimman avoin, jotta se houkuttelisi käyttäjiä, toisaalta liiallinen avoimuus kasvattaa tietomurron riskiä. Kompromissin löytäminen on hankaloitunut edelleen saavutettavien käyttäjien määrän kasvaessa ja tarjottavien palvelujen monimutkaistuessa. Tehtävä vaatii toisaalta erikoistapauksien käsittelyä, toisaalta yleistettävyyttä laajan käyttäjistön suhteen. Tietoturvan ylläpidon automatisointia ovat edistäneet muun muassa politiikkapäätösten erottaminen toteutuksesta ja mahdollisten tietomurron merkkien tarkkailun delegointi siihen erikoistuneille ohjelmille (IDS). Palvelujen käyttäjistön kasvaessa ja siirtyessä nimettömämmiksi kurinpito ja tarkkailu kuitenkin vaikeutuvat entisestään, eikä ylläpitäjiä riitä sidottavaksi jatkuvaan käyttäjien vahtimiseen. Monesti valvoja voikin vain poistaa käyttöoikeuden häiriköltä, jolloin esimerkiksi hieman lievemmälle sääntöjen ``venyttämiselle'' ei juuri voi tehdä mitään. Luottamuksenhallinta helpottaa rikkomuksiin ja toisaalta hyvään käytökseen reagoimista asteittain. Sen pohjalta käyttäjien valvontaan, pääsynhallintaan ja resurssien rajoitukseen liittyvä hienosäätö voidaan tuoda ymmärrettäväksi osaksi ylläpitoa ja pitkälti myös automatisoida. Avainsanat: luottamuksenhallinta, Web Services