Proton magnetic resonance spectroscopy of a boron neutron capture therapy 10B-carrier, L-p-boronophenylalanine-fructose complex

Boron neutron capture therapy (BNCT) is a radiotherapy that has mainly been used to treat malignant brain tumours, melanomas, and head and neck cancer. In BNCT, the patient receives an intravenous infusion of a 10B-carrier, which accumulates in the tumour area. The tumour is irradiated with epithermal or thermal neutrons, which result in a boron neutron capture reaction that generates heavy particles to damage tumour cells. In Finland, boronophenylalanine fructose (BPA-F) is used as the 10B-carrier. Currently, the drifting of boron from blood to tumour as well as the spatial and temporal accumulation of boron in the brain, are not precisely known. Proton magnetic resonance spectroscopy (1H MRS) could be used for selective BPA-F detection and quantification as aromatic protons of BPA resonate in the spectrum region, which is clear of brain metabolite signals. This study, which included both phantom and in vivo studies, examined the validity of 1H MRS as a tool for BPA detection. In the phantom study, BPA quantification was studied at 1.5 and 3.0 T with single voxel 1H MRS, and at 1.5 T with magnetic resonance imaging (MRSI). The detection limit of BPA was determined in phantom conditions at 1.5 T and 3.0 T using single voxel 1H MRS, and at 1.5 T using MRSI. In phantom conditions, BPA quantification accuracy of ± 5% and ± 15% were achieved with single voxel MRS using external or internal (internal water signal) concentration references, respectively. For MRSI, a quantification accuracy of <5% was obtained using an internal concentration reference (creatine). The detection limits of BPA in phantom conditions for the PRESS sequence were 0.7 (3.0 T) and 1.4 mM (1.5 T) mM with 20 × 20 × 20 mm3 single voxel MRS, and 1.0 mM with acquisition-weighted MRSI (nominal voxel volume 10(RL) × 10(AP) × 7.5(SI) mm3), respectively. In the in vivo study, an MRSI or single voxel MRS or both was performed for ten patients (patients 1-10) on the day of BNCT. Three patients had glioblastoma multiforme (GBM), and five patients had a recurrent or progressing GBM or anaplastic astrocytoma gradus III, and two patients had head and neck cancer. For nine patients (patients 1-9), MRS/MRSI was performed 70-140 min after the second irradiation field, and for one patient (patient 10), the MRSI study began 11 min before the end of the BPA-F infusion and ended 6 min after the end of the infusion. In comparison, single voxel MRS was performed before BNCT, for two patients (patients 3 and 9), and for one patient (patient 9), MRSI was performed one month after treatment. For one patient (patient 10), MRSI was performed four days before infusion. Signals from the tumour spectrum aromatic region were detected on the day of BNCT in three patients, indicating that in favourable cases, it is possible to detect BPA in vivo in the patient’s brain after BNCT treatment or at the end of BPA-F infusion. However, because the shape and position of the detected signals did not exactly match the BPA spectrum detected in the in vitro conditions, assignment of BPA is difficult. The opportunity to perform MRS immediately after the end of BPA-F infusion for more patients is necessary to evaluate the suitability of 1H MRS for BPA detection or quantification for treatment planning purposes. However, it could be possible to use MRSI as criteria in selecting patients for BNCT.

The Finnish Leadership Style in Transition - A Study of Leadership Criteria in the Insurance Business, 1997-2004 (summary section only)

The aim of the study was to explore the importance of evaluating leadership criteria in Finland at leader/subordinate levels of the insurance industry. The overall purpose of the thesis is tackled and analyzed from two different perspectives: - by examining the importance of the leadership criteria and style of Finnish insurance business leaders and their subordinates - by examining the opinions of insurance business leaders regarding leadership criteria in two culturally different countries: the US and Finland. This thesis consists of three published articles that scrutinise the focal phenomena both theoretically and empirically. The main results of the study do not lend support to the existence of a universal model of leadership criteria in the insurance business. As a matter of fact, the possible model seems to be based more on the special organizational and cultural circumstances of the country in question. The leadership criteria seem to be quite stable irrespective of the comparatively short research time period (3–5 years) and hierarchical level (subordinate/leader). Leaders have major difficulties in changing their leadership style. In fact, in order to bring about an efficient organizational change in the company you have to alternate the leader. The cultural dimensions (cooperation and monitoring) identified by Finnish subordinates were mostly in line with those of their managers, whilst emphasizing more the aspect of monitoring employees, which could be seen from their point of view as another element of managers’ optimizing/efficiency requirements. In Finnish surveys the strong emphasis on cooperation and mutual trust become apparent by both subordinates and managers. The basic problem is still how to emphasize and balance them in real life in such a way that both parties are happy to work together on a common basis. The American surveys suggests hypothetically that in a soft market period (buyer’s market) managers employ a more relationship-oriented leadership style and correspondingly adapt their leadership style to a more task-oriented approach in a hard market phase (seller’s market). In making business better Finnish insurance managers could probably concentrate more on task-oriented items such as reviewing, budgeting, monitoring and goal-orientation. The study also suggests that the social safety net of the European welfare state ideology has so far shielded the culture-specific sense of social responsibility of Finnish managers from the hazards of free competition and globalization.

Iäkkäiden lääkehoitoihin liittyvien riskien kartoittaminen – Arviointityökalun kehittäminen Delfoi-menetelmällä

Tutkimuksen taustalla on väestön ikääntyminen ja iäkkäiden lisääntynyt lääkkeiden käyttö. Ikääntyminen aiheuttaa elimistössä useita muutoksia, jotka voivat muuttaa lääkevastetta ja altistaa potilaan haittavaikutuksille. Iäkkäillä riski joutua sairaalaan lääkkeen haittavaikutuksen vuoksi on arvioitu olevan neljä kertaa suurempi kuin nuoremmilla. Monet lääkkeiden yhteis- ja haittavaikutukset olisivat ehkäistävissä välttämällä iäkkäillä tiettyjä lääkeaineita. Iäkkäiden lääkehoitojen seurantaa ja arviointia varten on kehitetty erilaisia suosituksia sekä Suomessa että kansainvälisesti. Tutkimuksen tavoitteena oli luoda Suomen oloihin soveltuva, hoitajien koulutettuina käytettävissä oleva, avohoidon yli 65-vuotiaiden iäkkäiden lääkitykseen liittyviä riskejä arvioiva työkalu. Työkalun avulla voitaisiin löytää ne potilaat, joiden lääkitykseen liittyy paljon riskejä. Tutkimuksen aineistona olivat laaja kansainvälinen kirjallisuuskatsaus iäkkäiden lääkehoitoihin liittyvistä tekijöistä sekä asiantuntijakommentoinnit, joiden perusteella luotiin alustava arviointityökalu. Alustava arviointityökalu validoitiin kolmikierroksisella Delfoi-menetelmällä. Delfoi-menetelmä on laadullinen konsensusmenetelmä, joka perustuu asiantuntijoiden arvioihin tutkittavasta asiasta. Kaksi ensimmäistä Delfoi-kierrosta mittasivat alustavan arviointityökalun kohtien soveltuvuutta ja kolmas kierros kohtien tärkeyttä arvioitaessa iäkkään lääkityksiin liittyviä riskejä. Tutkimuksen Delfoi-kierroksien vastaajiksi pyydettiin 33 geriatrian asiantuntijaa, joista vastaajiksi lupautui 11 lääkäriä, 3 proviisoria ja 4 sairaanhoitajaa. Delfoi-kierrosten tuloksia analysoitiin sekä kvantitatiivisesti että kvalitatiivisesti. Tutkimuksen tuloksena saatu arviointityökalu käsittää 19 iäkkäiden lääkehoitoa arvioivaa kohtaa. Asiantuntijapaneelin mukaan kaikki arviointityökalun lääkitykseen liittyviä riskejä mittaavat kohdat ovat tärkeitä tai jokseenkin tärkeitä, joten työkalun voidaan olettaa olevan validi mitattaessa lääkitykseen liittyviä riskejä. Jatkotutkimuksissa työkalun käytettävyyttä sekä riskien mittaamiskykyä tulee testata sekä arviointityökalun käyttäjien että potilaiden keskuudessa. Kehitettyä työkalua voidaan jatkossa hyödyntää esimerkiksi koulutustarkoituksissa sen varsinaisen käyttötarkoituksen lisäksi. Työkalun avulla iäkkäiden lääkehoitoa voidaan tulevaisuudessa toteuttaa entistä turvallisemmin ja tarkoituksenmukaisemmin.

Wood and fiber properties of Norway spruce and its suitability for thermomechanical pulping.

In the first part of the study, the selected wood and fiber properties were investigated in terms of their occurrence and variation in wood, as well as their relevance from the perspective of thermomechanical pulping process and related end-products. It was concluded that the most important factors were the fiber dimensions, juvenile wood content, and in some cases, the content of heartwood being associated with extremely dry wood with low permeability in spruce. With respect to the above properties, the following three pulpwood assortments of which pulping potential was assumed to vary were formed: wood from regeneration cuttings, first-thinnings wood, and sawmill chips. In the experimental part of the study the average wood and fiber characteristics and their variation were determined for each raw material group prior to pulping. Subsequently, each assortment - equaling about 1500 m3 roundwood - was pulped separately for a 24 h period, at constant process conditions. The properties of obtained newsgrade thermomechanical pulps were then determined. Thermomechanical pulping (TMP) from sawmill chips had the highest proportion of long fibers, smallest proportion of fines, and had generally the coarsest and longest fibers. TMP from first-thinnings wood was just the opposite, whereas that from regeneration cuttings fell in between the above two extremes. High proportion of dry heartwood in wood originating from regeneration cuttings produced a slightly elevated shives content. However, no differences were found in pulp specific energy consumption. The obtained pulp tear index was clearly best in TMP made from sawmill chips and poorest in pulp from first-thinnings wood, which had generally inferior strength properties. No dramatical differences in any of the strength properties were found between pulp from sawmill residual wood and regeneration cuttings. Pulp optical properties were superior in TMP from first-thinnings. Unexpectedly, no noticeable differences, which could be explained with fiber morphology, were found in sheet density, bulk, air permeance or roughness between the three pulps. The most important wood quality factors in this study were the fiber length, fiber cross-sectional dimensions and percentage juvenile wood. Differences found in the quality of TMP manufactured from the above spruce assortments suggest that they could be segregated and pulped separately to obtain specific product characteristics, i.e., for instance tailor-made end-products, and to minimize unnecessary variation in the raw material quality, and hence, pulp quality.

Accurate mass-based analysis in human sport doping control : Application of liquid chromatography - time-of-flight mass spectrometry

Human sport doping control analysis is a complex and challenging task for anti-doping laboratories. The List of Prohibited Substances and Methods, updated annually by World Anti-Doping Agency (WADA), consists of hundreds of chemically and pharmacologically different low and high molecular weight compounds. This poses a considerable challenge for laboratories to analyze for them all in a limited amount of time from a limited sample aliquot. The continuous expansion of the Prohibited List obliges laboratories to keep their analytical methods updated and to research new available methodologies. In this thesis, an accurate mass-based analysis employing liquid chromatography - time-of-flight mass spectrometry (LC-TOFMS) was developed and validated to improve the power of doping control analysis. New analytical methods were developed utilizing the high mass accuracy and high information content obtained by TOFMS to generate comprehensive and generic screening procedures. The suitability of LC-TOFMS for comprehensive screening was demonstrated for the first time in the field with mass accuracies better than 1 mDa. Further attention was given to generic sample preparation, an essential part of screening analysis, to rationalize the whole work flow and minimize the need for several separate sample preparation methods. Utilizing both positive and negative ionization allowed the detection of almost 200 prohibited substances. Automatic data processing produced a Microsoft Excel based report highlighting the entries fulfilling the criteria of the reverse data base search (retention time (RT), mass accuracy, isotope match). The quantitative performance of LC-TOFMS was demonstrated with morphine, codeine and their intact glucuronide conjugates. After a straightforward sample preparation the compounds were analyzed directly without the need for hydrolysis, solvent transfer, evaporation or reconstitution. The hydrophilic interaction technique (HILIC) provided good chromatographic separation, which was critical for the morphine glucuronide isomers. A wide linear range (50-5000 ng/ml) with good precision (RSD<10%) and accuracy (±10%) was obtained, showing comparable or better performance to other methods used. In-source collision-induced dissociation (ISCID) allowed confirmation analysis with three diagnostic ions with a median mass accuracy of 1.08 mDa and repeatable ion ratios fulfilling WADA s identification criteria. The suitability of LC-TOFMS for screening of high molecular weight doping agents was demonstrated with plasma volume expanders (PVE), namely dextran and hydroxyethylstarch (HES). Specificity of the assay was improved, since interfering matrix compounds were removed by size exclusion chromatography (SEC). ISCID produced three characteristic ions with an excellent mean mass accuracy of 0.82 mDa at physiological concentration levels. In summary, by combining TOFMS with a proper sample preparation and chromatographic separation, the technique can be utilized extensively in doping control laboratories for comprehensive screening of chemically different low and high molecular weight compounds, for quantification of threshold substances and even for confirmation. LC-TOFMS rationalized the work flow in doping control laboratories by simplifying the screening scheme, expediting reporting and minimizing the analysis costs. Therefore LC-TOFMS can be exploited widely in doping control, and the need for several separate analysis techniques is reduced.