Anthraquinones from the Fungus Dermocybe sanguinea as Textile Dyes

This study is based on the multidiciplinary approach of using natural colorants as textile dyes. The author was interested in both the historical and traditional aspects of natural dyeing as well as the modern industrial applications of the pure natural compounds. In the study, the anthraquinone compounds were isolated as aglycones from the ectomycorrhizal fungus Dermocybe sanguinea. The endogenous beta-glucosidase of the fungus was used to catalyse the hydrolysis of the O-glycosyl linkage in emodin- and dermocybin-1-beta-D-glucopyranosides. The method, in which 10.45 kg of fresh fungi was starting material, yielded two fractions: 56.0 g of Fraction 1 (94% of the total amount of pigment,) consisting almost exclusively of the main pigments emodin and dermocybin, and 3.3 g of Fraction 2 (6%) consisting mainly of the anthraquinone carboxylic acids. The anthraquinone compounds in Fractions 1 and 2 were separated by one- and two-dimensional thin-layer-chromatography (TLC) using silica plates. 1D TLC showed that neither an acidic nor a basic solvent system alone separated completely all the anthraquinones isolated from D. sanguinea, in spite of the variation of the rations of the solvent components in the systems. Thus, a new 2D TLC technique was developed, applying n-pentanol-pyridine-methanol (6:4:3, v/v/v) and toluene-ethyl acetate-ethanol-formic acid (10:8:1:2, v/v/v/v) as eluents. Fifteen different anthraquinone derivatives were completely separated from one another. Emodin, physcion, endocrocin, dermolutein, dermorubin, 5-chlorodermorubin, emodin-1-beta-D-glucopyranoside, dermocybin-1-beta-D-glucopyranoside and dermocybin, and five new compounds, not earlier identified in D. sanguinea, 7-chloroemodin, 5,7-dichloroemodin, 5,7-dichloroendocrocin, 4-hydroxyaustrocorticone and austrocorticone, were separated and identified on the basis of their Rf-values, UV/Vis spectra and mass spectra. One substance remained unidentified, because of its very low concentration. The anthraquinones in Fractions 1 and 2 were preparatively separeted by liquid-liquid partition, with isopropylmethyl ketone and aqueous phosphate buffer as the solvent system. Advantage was taken of the principle of stepwise pH-gradient elution. The multiple liquid-liquid partition (MLLP) offered an excellent method for the preparative separation of compounds, which contain acidic groups such as the phenolic OH and COOH groups. Due to their strong aggregation properties, these compounds are, without derivatization, very difficult to separate on a preparative scale by chromatographic methods. By the MLLP method remarkable separations were achieved for the components in each mixture. Emodin and dermocybin were both obtained from Fraction 1 in a purity of at least 99%. Pure emodin and dermocybin were applied as mordant dyes to wool and polyamide and as disperse dyes to polyester and polyamide, using the high temperature (HT) technique. A mixture of dermorubin and 5-chlorodermorubin was applied as an acid dye to wool. In these experiments, synthetic dyes were used as references. Experiments were also performed using water extract of the air-dried fungi as dye liquor for wool and silk. The main colouring compounds in the crude water extract were emodin and dermocybin, which indicated that the O-glycosyl linkages in emodin- and dermocybin-1-beta-D-glucopyranosides were broken by the beta-glucosidase enzyme. Apparently, the hydrolysis occurred during the drying of the fungi and during the soaking of the dried fruit bodies overnight when preparing the dyebath. The colour of each dyed material was investigated in terms of the CIELAB L*, a* and b* values, and the colour fastness to light, washing and rubbing was tested according to the ISO standards. In the mordant dyeing experiments, emodin dyed wool and polyamide yellow and red, depending on the pH of the dyebath. Dermocybin gave purple and violet colours. The colour fastness of the mordant-dyed fabrics varied from good to moderate. The fastness properties of the natural anthraquinone carboxylic acids on wool were good, indicating the strength of the ionic bonds between the COO- groups of the dyes and the NH3+ groups of the fibres. In the disperse dyeing experiments, emodin dyed polyester bright yellow and dermocybin bright reddish-orange, and the fabrics showed excellent colour fastness. In contrast, emodin and dermocybin successfully dyed polyamide brownish-orange and wine-red, respectively, but with only moderate fastness. In industrial dyeing processes, natural anthraquinone aglycone mixtures dyed wool and silk well even at low concentrations of mordants, i.e. with 10% of the weight of the fibre (owf) of KAl(SO4)2 and 1 or 0.5% owf of other mordants. This study showed that purified natural anthraquinone compounds can produce bright hues with good colour-fastness properties in different textile materials. Natural anthraquinones have a significant potential for new dyeing techniques and will provide useful alternatives to synthetic dyes.

Breath Testing by Fourier Transform Infrared Spectroscopy for Solvent Intoxication Diagnostics

Technical or contaminated ethanol products are sometimes ingested either accidentally or on purpose. Typical misused products are black-market liquor and automotive products, e.g., windshield washer fluids. In addition to less toxic solvents, these liquids may contain the deadly methanol. Symptoms of even lethal solvent poisoning are often non-specific at the early stage. The present series of studies was carried out to develop a method for solvent intoxication breath diagnostics to speed up the diagnosis procedure conventionally based on blood tests. Especially in the case of methanol ingestion, the analysis method should be sufficiently sensitive and accurate to determine the presence of even small amounts of methanol from the mixture of ethanol and other less-toxic components. In addition to the studies on the FT-IR method, the Dräger 7110 evidential breath analyzer was examined to determine its ability to reveal a coexisting toxic solvent. An industrial Fourier transform infrared analyzer was modified for breath testing. The sample cell fittings were widened and the cell size reduced in order to get an alveolar sample directly from a single exhalation. The performance and the feasibility of the Gasmet FT-IR analyzer were tested in clinical settings and in the laboratory. Actual human breath screening studies were carried out with healthy volunteers, inebriated homeless men, emergency room patients and methanol-intoxicated patients. A number of the breath analysis results were compared to blood test results in order to approximate the blood-breath relationship. In the laboratory experiments, the analytical performance of the Gasmet FT-IR analyzer and Dräger 7110 evidential breath analyzer was evaluated by means of artificial samples resembling exhaled breath. The investigations demonstrated that a successful breath ethanol analysis by Dräger 7110 evidential breath analyzer could exclude any significant methanol intoxication. In contrast, the device did not detect very high levels of acetone, 1-propanol and 2-propanol in simulated breath. The Dräger 7110 evidential breath ethanol analyzer was not equipped to recognize the interfering component. According to the studies the Gasmet FT-IR analyzer was adequately sensitive, selective and accurate for solvent intoxication diagnostics. In addition to diagnostics, the fast breath solvent analysis proved feasible for controlling the ethanol and methanol concentration during haemodialysis treatment. Because of the simplicity of the sampling and analysis procedure, non-laboratory personnel, such as police officers or social workers, could also operate the analyzer for screening purposes.

SU-8-Based Microchips for Capillary Electrophoresis and Electrospray Ionization Mass Spectrometry

Miniaturization of analytical instrumentation is attracting growing interest in response to the explosive demand for rapid, yet sensitive analytical methods and low-cost, highly automated instruments for pharmaceutical and bioanalyses and environmental monitoring. Microfabrication technology in particular, has enabled fabrication of low-cost microdevices with a high degree of integrated functions, such as sample preparation, chemical reaction, separation, and detection, on a single microchip. These miniaturized total chemical analysis systems (microTAS or lab-on-a-chip) can also be arrayed for parallel analyses in order to accelerate the sample throughput. Other motivations include reduced sample consumption and waste production as well as increased speed of analysis. One of the most promising hyphenated techniques in analytical chemistry is the combination of a microfluidic separation chip and mass spectrometer (MS). In this work, the emerging polymer microfabrication techniques, ultraviolet lithography in particular, were exploited to develop a capillary electrophoresis (CE) separation chip which incorporates a monolithically integrated electrospray ionization (ESI) emitter for efficient coupling with MS. An epoxy photoresist SU-8 was adopted as structural material and characterized with respect to its physicochemical properties relevant to chip-based CE and ESI/MS, namely surface charge, surface interactions, heat transfer, and solvent compatibility. As a result, SU-8 was found to be a favorable material to substitute for the more commonly used glass and silicon in microfluidic applications. In addition, an infrared (IR) thermography was introduced as direct, non-intrusive method to examine the heat transfer and thermal gradients during microchip-CE. The IR data was validated through numerical modeling. The analytical performance of SU-8-based microchips was established for qualitative and quantitative CE-ESI/MS analysis of small drug compounds, peptides, and proteins. The CE separation efficiency was found to be similar to that of commercial glass microchips and conventional CE systems. Typical analysis times were only 30-90 s per sample indicating feasibility for high-throughput analysis. Moreover, a mass detection limit at the low-attomole level, as low as 10E+5 molecules, was achieved utilizing MS detection. The SU-8 microchips developed in this work could also be mass produced at low cost and with nearly identical performance from chip to chip. Until this work, the attempts to combine CE separation with ESI in a chip-based system, amenable to batch fabrication and capable of high, reproducible analytical performance, have not been successful. Thus, the CE-ESI chip developed in this work is a substantial step toward lab-on-a-chip technology.

7 päivää -lehden aukeama multisemioottisena tekstinä

Sensaatiolehden teksti, joka koostuu monista kuvallisista ja kielellisistä elementeistä, on tutkielman aiheena. Tutkielmassa vastataan kysymykseen, millainen tämä teksti on, kun sitä tarkastellaan multisemioottisesti. Analyysin lähtökohdaksi otetaan neljä merkityksen muodostumisen tasoa: tekstin rakentuminen (kompositio), maailman hahmottaminen (ideationaalinen merkitys), maailmaan osallistuminen (interpersoonainen merkitys) ja intertekstuaalisuus ynnä oletuslukijat (rekontekstualisointi). Teksti toimii yhtaikaa jokaisella tasolla. Aineistona on 7 päivää -lehden aukeama, jossa on Pop-palat-palsta. Aineistoa lähestytään deskriptiivisesti, eikä sitä arvoteta hyväksi tai huonoksi. Tutkielmassa käytetään viitekehyksinä systeemis-funktionaalista kieliteoriaa, kriittistä tekstianalyysiä ja sosiosemioottista visuaalista teoriaa. Tutkielma kuuluu tekstintutkimuksen alaan. Tekstiksi luetaan tässä työssä sekä visuaalisten että verbaalisten semioottisten merkkijärjestelmien tuotokset. Analyysissä osoitetaan, millaisen kokonaisuuden kuva ja kieli muodostavat, miten ne pelaavat yhteen ja millaista merkitystä yhteispeli viestii. Aikaisemman suomalaisen multisemioottisen tekstintutkimuksen kohteeksi ei ole otettu aikakauslehtiä saati sensaatiolehtiä. Elementtien muodostama kokonaisuus mahdollistaa lukijalle monta eri reittiä edetä tekstissä; teksti on multilineaarinen. Tärkeimmiksi elementeiksi erottuvat valokuvat ja otsikot. Sekä kuvassa että otsikossa, juttutekstissä ja kuvatekstissä etualaistetaan sama henkilö. Etualaistettu henkilö esitetään usein valokuvassa kahden henkilön välillä aktiivisena toimijana, hän on otsikossa tekijä sekä juttutekstissä ja kuvatekstissä teema. Osa otsikoista on puhekuplassa, ja muutenkin otsikoissa on vallalla verbaalinen prosessityyppi. Kuvan henkilöt puhuvat suoraan lukijalle. Referaattiotsikoiden totuudellisuus on otettu aukeamalla rennosti. Tätä selitetään moniäänisyyden käsitteellä: kuvan henkilön ja palstan kirjoittajan äänet kuuluvat otsikoissa samanaikaisesti. Tärkeä tutkimustulos on se, että otsikoita ei ole merkitty referoinniksi tyypillisten referointikonventioiden tapaan, vaan johtolauseen paikan ja tehtävän täyttää valokuva. Kuva kehystää referaattiotsikon. Lukijaan otetaan läheinen kontakti: häntä pyydetään vastaamaan viikkokilpailuun, kuvien henkilöt vaativat katseellaan lukijaa osallistumaan, valokuvat on rajattu sosiaalisti läheisiksi, käytetään arkikieltä. Aineistoteksti on ennen kaikkea sosiaalista. Analyysissä osoitetaan tekstin tehtäviä, joita ovat sosiaalisuuden lisäksi mm. kaupallisuus, viihteellisyys ja juoruilu. Tekstipiirteistä erityisesti kirjasinlajit ja -leikkaukset nähdään interteksteinä muihin aikakauslehtiin. Aukeaman kokonaisuus tulkitaan analogiseksi kollaasitaiteen kanssa. Räväkät kuvat ja otsikot yhdessä juttu- ja kuvatekstien ym. elementtien kanssa muodostavat multisemioottisen kokonaisuuden, jossa koodien perinteiset tehtävät sekoittuvat: visuaalinen on myös verbaalista ja verbaalinen visuaalista.

Idealähtöistä koulualgebraa : IDEAA-opetusmallin kehittäminen algebran opetukseen peruskoulun 7. luokalla

This research is based on the problems in secondary school algebra I have noticed in my own work as a teacher of mathematics. Algebra does not touch the pupil, it remains knowledge that is not used or tested. Furthermore the performance level in algebra is quite low. This study presents a model for 7th grade algebra instruction in order to make algebra more natural and useful to students. I refer to the instruction model as the Idea-based Algebra (IDEAA). The basic ideas of this IDEAA model are 1) to combine children's own informal mathematics with scientific mathematics ("math math") and 2) to structure algebra content as a "map of big ideas", not as a traditional sequence of powers, polynomials, equations, and word problems. This research project is a kind of design process or design research. As such, this project has three, intertwined goals: research, design and pedagogical practice. I also assume three roles. As a researcher, I want to learn about learning and school algebra, its problems and possibilities. As a designer, I use research in the intervention to develop a shared artefact, the instruction model. In addition, I want to improve the practice through intervention and research. A design research like this is quite challenging. Its goals and means are intertwined and change in the research process. Theory emerges from the inquiry; it is not given a priori. The aim to improve instruction is normative, as one should take into account what "good" means in school algebra. An important part of my study is to work out these paradigmatic questions. The result of the study is threefold. The main result is the instruction model designed in the study. The second result is the theory that is developed of the teaching, learning and algebra. The third result is knowledge of the design process. The instruction model (IDEAA) is connected to four main features of good algebra education: 1) the situationality of learning, 2) learning as knowledge building, in which natural language and intuitive thinking work as "intermediaries", 3) the emergence and diversity of algebra, and 4) the development of high performance skills at any stage of instruction.

Yhteinen käsityö peruskoulun 7. luokalla : Opettajien kokemuksia yhteisen käsityön opetuksesta ja organisoinnista

Finnish education politics presume that basic education should be equal to all students. While organising craft education equality can be understood as similarity or as possibility to choose. The possibility to be able to choose whether textile or technical craft despite of one´s gender has been the aim of laws and curriculums already over 30 years. In practice it´s almost impossible to students to ignore feminine and masculine roles that go deep into our culture. Choosing craft has been divided by gender, which is the reason why possibility to choose has not been good enough to educationalists of equality. The latest guidelines for the National core curriculum for bacis education were issued in 2004. According to curriculum craft education consists parts of both technical and textile craft. All students should take part in both sectors of crafts. Furthermore, one can be given a possibility to consentrate his studies in whether textile or technical craft. The curriculum does not set the rules how the education should be organised, which means that it can be organised in many ways depending on city, school or teacher. Teachers and other specialists have contradictory feelings towards shared craft education, because traditional way to see craft in Finland is to separate textile craft from technical craft. Both crafts have some common features that are introduced in curriculum. Besides there is many equal things in craft theories that bind textile and technical craft to each other. The main purpose of this research was to find out, how shared craft education has been organised at the 7.th grade in Finnish comprehensive school, and which things affect in the settlements. Second goal was to describe and compare teachers´ experiences in teaching shared craft education. Third aim of this study was how shared craft has changed craft education. I collected the research material in May 2006 by interviewing both textile and technical craft teachers who teach shared craft. The material consists of fourteen theme interviews. In the analysis of the material I used theoretic bounded document analysis. According to the research there are three different ways to organise shared craft education: 50 50-arrangement, exchanging period and project week. In the schools that carried out 50 50-arrangement teaching was realised mainly in heterogenous groups. Principals had usual a lot of authorization on how to arrange craft education, which means that their views on equality, laws and curriculum affected in the settlemets more than teachers´ opinions. Teachers´ attitudes to shared craft were mainly positive. The changing of craft education can be divided in two parts: the aims and the containings of the curriculum have changed, as well as the meaning of the craft as core subject. Teachers have been forced to decrease the containings of both textile and technical crafts. Despite of eliminations both crafts still have comprehensive containings. Teachers decided what to teach by these argumets: Students should learn some basic things or produce a certain product. Usually teachers had also a lot of experience and special intrests in crafts. According to this research there is four significant meanings for shared craft education: 1) developing readiness for doing things, 2) developing skills of thinking, 3) delight of doing things and 4) teaching attitude.

Aspects and Applications of Pulse Sequence Design for Solution-State Nuclear Magnetic Resonance Spectroscopy

NMR spectroscopy enables the study of biomolecules from peptides and carbohydrates to proteins at atomic resolution. The technique uniquely allows for structure determination of molecules in solution-state. It also gives insights into dynamics and intermolecular interactions important for determining biological function. Detailed molecular information is entangled in the nuclear spin states. The information can be extracted by pulse sequences designed to measure the desired molecular parameters. Advancement of pulse sequence methodology therefore plays a key role in the development of biomolecular NMR spectroscopy. A range of novel pulse sequences for solution-state NMR spectroscopy are presented in this thesis. The pulse sequences are described in relation to the molecular information they provide. The pulse sequence experiments represent several advances in NMR spectroscopy with particular emphasis on applications for proteins. Some of the novel methods are focusing on methyl-containing amino acids which are pivotal for structure determination. Methyl-specific assignment schemes are introduced for increasing the size range of 13C,15N labeled proteins amenable to structure determination without resolving to more elaborate labeling schemes. Furthermore, cost-effective means are presented for monitoring amide and methyl correlations simultaneously. Residual dipolar couplings can be applied for structure refinement as well as for studying dynamics. Accurate methods for measuring residual dipolar couplings in small proteins are devised along with special techniques applicable when proteins require high pH or high temperature solvent conditions. Finally, a new technique is demonstrated to diminish strong-coupling induced artifacts in HMBC, a routine experiment for establishing long-range correlations in unlabeled molecules. The presented experiments facilitate structural studies of biomolecules by NMR spectroscopy.

Jeremia 20:7-13 psykoanalyysissa : Nimettömän valituslaulun syntyprosessi tekstin objektimielikuvien muutosten valossa

Tämän pro gradu -työn tarkoituksena on selvittää tekstin Jer 20:7-13 jumalakuvaa ja muita ”tekstin puhujan” ilmaisemia vuorovaikutussuhteita ja vaihtelevia tunteita. On kuitenkin epäselvää, missä määrin Jeremian kirja tai sen yksittäiset jaksot kuvaavat profeetan persoonaa ja historiallista taustaa. Tekstit voivat kuvata myös muita myöhempiä tilanteita ja asenteita. Tämän tutkimuksen pääasiallinen eksegeettinen metodi on syvyyspsykologinen. Se saattaa pystyä kertomaan jotakin siitä, miten tutkittava teksti peilaa menneisyyden kokemuksellisia kaavoja. Samaan tapaan kuten psykohistoriassa, tutkimus ei yritä tutkia, tulkita tai rekonstruoida tradition tai historian Jeremiaa. Syvyyspsykologinen eksegeesi on tunnistettu jo aiemmin, mutta suomalaisessa tutkimuksessa sitä ei vielä ole sovellettu yksittäisiin teksteihin. Tämän tutkimuksen tutkimusasetelma avaa tekstin sisäisiä ja vaihtelevia vuorovaikutussuhteita eli objektisuhteita. Tutkimus nimittää tätä vuorovaikutussuhteiden analyysiä objektisuhdeanalyysiksi. Se perustuu teologian tohtori, psykoanalyytikko Matti Hyrckin psykoanalyyttiseen suhteessaolon perusmielikuvien teoriaan (SPT), jonka hän esittelee väitöskirjassaan Mielen kuvat Jumalasta (1995). Tekstin Jahve-kuvat on nähtävä objektirepresentaatioina. Nämä vahvasti värittyneet representaatiot ja kuvat kertovat enemmän kokijasta itsestään kuin niistä objekteista, joiden kuviksi ne ovat syntyneet. Käsitys objektien sisäsyntyisyydestä mahdollistaa Hyrckillä objektisuhteiden systematisoinnin ja SPT:n luomisen. Siten emotionaaliset silmälasit on tämän tutkimuksen tekijän mielestä mahdollista valjastaa myös tutkijan käyttöön. Tutkimuksen laaja näkökulmia hakeva teoriaosuus varmistaa tämän. Hermeneuttinen ”kolmen maailman malli” on lukijakeskeisyyteen ja kulttuurihyppyyn arvokas työväline. Jeremian kirja sisältää useita osin runomuotoisia valituksia, joista tutkittava teksti on viimeinen. Valituslaulujen sarja päättyy tutkittavaa tekstiä seuraavaan syntymäpäivän kiroamiseen jakeissa 14-18. Valituksen edellä kontekstina on joitakin kertomuksia Jeremiasta, mutta vasta jakeessa 20:2 Jeremia nimetään profeetaksi. Muuten valittaja on nimetön. Jeremia-kertomusten kehys on tässä toimituksellinen ja valituksen jälkeen seuraa deuteronomistista saarnaa Juudaa ja Jerusalemia vastaan. Tutkimus selvittää jakeiden 7-13 rakennetta, sisältöä ja tulkintaa ensin lähinnä laji- ja kirjallisuus- kriittisesti. Tutkimus osoittaa, että Jeremian valitus noudattaa yksilön valituslaulun kaavaa, mutta ei kuitenkaan yksiselitteisesti taivu lajin usein stereotyyppisiin tarkoituksiin. Suurin syy tähän on tekstin proosa- ja runomuodon vaihtelu ja sisällön hajanaisuus. Edes valituksen ydintä ei voi varmistaa, vaikka valituslaulun nuorimpina osina on tyypillisesti helppo pitää loppupuolen kollektiivisia lisiä. Varsinainen valitus on jakeissa 7-9 ja jakeet 10-13 ovat todennäköisimmin monivaiheinen päätössarja. Tutkimuksen keskeiset objektisuhdeteoreettiset peruskäsitteet sisäinen subjekti ja sisäinen objekti ovat ihmisen tiedostamattoman tason mielikuvia. Varhaisen tilan vuorovaikutusmielikuvien sisäisinä subjekteina ovat Riippuvainen ja Itseriittoinen. Ne ovat vaihtelevissa suhteissa Houkuttajan ja Hallitsijan muotoisia sisäisiä objekteja kohtaan. Myöhäisessä tilassa objekteille on syytä antaa uudet nimet: Vetäytyjä, Vaatija ja Parantaja. Tutkimus etenee osoittamalla tekstin ja SPT:n mukaisen mallin samankaltaisuuksia. Samalla on ollut mahdollista ottaa kantaa myös tekstin saumoihin ja tekstin syntyprosessiin. Tekstin objekti osoittautuu pääosin Hallitsijaksi, sillä Houkuttajan muotoisista jumaluuksista on kollektiivisesti pyritty tekemään pesäeroa Jerusalemin temppelin hävityksestä lähtien. Silti muistoista ja Houkuttajaksikin värittyneistä kaipuun ja pelon muodoista ei päästä eroon. Valituksen alkujakeita 7-9 leimaa Riippuvaisen masennus ja Itseriittoisen häpeä. Jakeissa 11-13 Hallitsijan muotoinen Jahve Sebaot tarjoaa hierarkkista symbioosia. Myöhäistä Vaatijaa ei tutkittavassa tekstissä ole kuin vanhurskaan käsitteenä, joka deuteronomistisessa teologiassa perustuu Jahven sanan kuulemiseen ja lain noudattamiseen. Tutkimus pyrkii osoittamaan, että kaikilla kokemuksilla on jollakin tavalla sekä yhteisöä että yksilöä eheyttäviä tarkoituksia. Kun valitus päättyy sarjaan vakuutuksia ja huipentuu kollektiiviseen ylistyskehotukseen, myös niillä on tarkoitus. Yksi osa tutkimustehtävää on ollut testata psykoanalyyttisen objektisuhdeteoreettisen metodin toimivuutta eksegeettisessä tutkimuksessa. Vaikka tulokset ovat suuntaa antavia, metodi on osoittautunut toimivaksi.

Occupational chronic solvent encephalopathy in Finland 1995 - 2007 : incidence and diagnostic methods

The occurrence of occupational chronic solvent encephalopathy (CSE) seems to decrease, but still every year reveals new cases. To prevent CSE and early retirement of solvent-exposed workers, actions should focus on early CSE detection and diagnosis. Identifying the work tasks and solvent exposure associated with high risk for CSE is crucial. Clinical and exposure data of all the 128 cases diagnosed with CSE as an occupational disease in Finland during 1995-2007 was collected from the patient records at the Finnish Institute of Occupational Health (FIOH) in Helsinki. The data on the number of exposed workers in Finland were gathered from the Finnish Job-exposure Matrix (FINJEM) and the number of employed from the national workforce survey. We analyzed the work tasks and solvent exposure of CSE patients and the findings in brain magnetic resonance imaging (MRI), quantitative electroencephalography (QEEG), and event-related potentials (ERP). The annual number of new cases diminished from 18 to 3, and the incidence of CSE decreased from 8.6 to 1.2 / million employed per year. The highest incidence of CSE was in workers with their main exposure to aromatic hydrocarbons; during 1995-2006 the incidence decreased from 1.2 to 0.3 / 1 000 exposed workers per year. The work tasks with the highest incidence of CSE were floor layers and lacquerers, wooden surface finishers, and industrial, metal, or car painters. Among 71 CSE patients, brain MRI revealed atrophy or white matter hyperintensities or both in 38% of the cases. Atrophy which was associated with duration of exposure was most frequently located in the cerebellum and in the frontal or parietal brain areas. QEEG in a group of 47 patients revealed increased power of the theta band in the frontal brain area. In a group of 86 patients, the P300 amplitude of auditory ERP was decreased, but at individual level, all the amplitude values were classified as normal. In 11 CSE patients and 13 age-matched controls, ERP elicited by a multimodal paradigm including an auditory, a visual detection, and a recognition memory task under single and dual-task conditions corroborated the decrease of auditory P300 amplitude in CSE patients in single-task condition. In dual-task conditions, the auditory P300 component was, more often in patients than in controls, unrecognizable. Due to the paucity and non-specificity of the findings, brain MRI serves mainly for differential diagnostics in CSE. QEEG and auditory P300 are insensitive at individual level and not useful in the clinical diagnostics of CSE. A multimodal ERP paradigm may, however, provide a more sensitive method to diagnose slight cognitive disturbances such as CSE.