Planar Edgeless Detectors for the TOTEM Experiment at the LHC

The TOTEM experiment at the LHC will measure the total proton-proton cross-section with a precision better than 1%, elastic proton scattering over a wide range in momentum transfer -t= p^2 theta^2 up to 10 GeV^2 and diffractive dissociation, including single, double and central diffraction topologies. The total cross-section will be measured with the luminosity independent method that requires the simultaneous measurements of the total inelastic rate and the elastic proton scattering down to four-momentum transfers of a few 10^-3 GeV^2, corresponding to leading protons scattered in angles of microradians from the interaction point. This will be achieved using silicon microstrip detectors, which offer attractive properties such as good spatial resolution (<20 um), fast response (O(10ns)) to particles and radiation hardness up to 10^14 "n"/cm^2. This work reports about the development of an innovative structure at the detector edge reducing the conventional dead width of 0.5-1 mm to 50-60 um, compatible with the requirements of the experiment.

Median muotoilema : Muotoilun mediajulkisuus suomalaisessa talouslehdistössä

Designed by the Media The Media publicity of Design in the Finnish Economic Press The meaning of design has increased in consumer societies. Design is the subject of debate and the number of media discussions has also increased steadily. Especially the role of industrial design has been emphasised. In this study I examine the media publicity of design in the Finnish economic press from the late 1980s to the beginning of the 2000s. The research question is connected to media representations: How is design represented in the Finnish economic press? In other words, what are the central topics of design in the economic press, and to what issues are the media debates connected? The usually repeated phrase that design discussions take place only on the cultural pages of the daily press or in cultural contexts is being changed. Design is also linked to the consumer culture and consumers everyday practices. The research material has been collected from the Finnish economic press. The qualitative sample consists of articles from Kauppalehti, Taloussanomat and from several economic papers published by the Talentum Corporation. The approach of the research is explorative, descriptive and hermeneutic. This means that the economic press articles are used to explore how design is represented in the media. In addition, the characteristics of design represented in the media are described in detail. The research is based on the interpretive tradition of studying textual materials. Background assumptions are thus grounded in hermeneutics. Erving Goffman s frame analysis is applied in analysing the economic press materials. The frames interpreted from the articles depict the media publicity of design in the Finnish economic press. The research opens up a multidimensional picture of design in the economic press. The analysis resulted in five frames that describe design from various points of view. In the personal frame designers are described in private settings and through their personal experiences. The second frame relates to design work. In the frame of mastery of the profession, the designers work is interpreted widely. Design is considered from the aspects of controlling personal know-how, co-operation and the overall process of design. The third frame is connected to the actual substance of the economic press. In the frame of economy and market, design is linked to international competitiveness, companies competitive advantage and benefit creation for the consumers. The fourth frame is connected to the actors promoting design on a societal level. In the communal frame, the economic press describes design policy, design research and education and other actors that actively develop design in the societal networks. The last frame is linked to the traditions of design and above all to the examination of the cultural transition. In the frame of culture the traditions of design are emphasised. Design is also connected to the industrial culture and furthermore to the themes of the consumer culture. It can be argued that the frames construct media publicity of design from various points of view. The frames describe situations, action and the actors of design. The interpreted media frames make it possible to understand the relation of interpreted design actions and the culture. Thus, media has a crucial role in representing and recreating meanings related to design. The publicity of design is characterised by the five focal themes: personification, professionalisation, commercialisation, communalisation and transition of cultural focus from the traditions of design to the industrial culture and the consumer culture. Based on my interpretation these themes are guided by the mediatisation of design. The design phenomenon is defined more often on the basis of the media representations in the public discourses. The design culture outlined in this research connects socially constructed and structurally organised action. Socially constructed action in design is connected to the experiences, social recreation and collective development of design. Structurally, design is described as professional know-how, as a process and as an economic profit generating action in the society. The events described by the media affect the way in which people experience the world, the meanings they connect to the events around themselves and their life in the world. By affecting experiences, the media indirectly affects human actions. People have become habituated to read media representations on a daily basis, but they are not used to reading and interpreting the various meanings that are incorporated in the media texts.

Measurement of the Single Top Quark Production Cross Section at CDF

We report a measurement of the single top quark production cross section in 2.2 ~fb-1 of p-pbar collision data collected by the Collider Detector at Fermilab at sqrt{s}=1.96 TeV. Candidate events are classified as signal-like by three parallel analyses which use likelihood, matrix element, and neural network discriminants. These results are combined in order to improve the sensitivity. We observe a signal consistent with the standard model prediction, but inconsistent with the background-only model by 3.7 standard deviations with a median expected sensitivity of 4.9 standard deviations. We measure a cross section of 2.2 +0.7 -0.6(stat+sys) pb, extract the CKM matrix element value |V_{tb}|=0.88 +0.13 -0.12 (stat+sys) +- 0.07(theory), and set the limit |V_{tb}|>0.66 at the 95% C.L.

Search for single top quark production in pp̅ collisions at √s=1.96 TeV in the missing transverse energy plus jets topology

We report a search for single top quark production with the CDF II detector using 2.1 fb-1 of integrated luminosity of pbar p collisions at sqrt{s}=1.96 TeV. The data selected consist of events characterized by large energy imbalance in the transverse plane and hadronic jets, and no identified electrons and muons, so the sample is enriched in W -> tau nu decays. In order to suppress backgrounds, additional kinematic and topological requirements are imposed through a neural network, and at least one of the jets must be identified as a b-quark jet. We measure an excess of signal-like events in agreement with the standard model prediction, but inconsistent with a model without single top quark production by 2.1 standard deviations (sigma), with a median expected sensitivity of 1.4 sigma. Assuming a top quark mass of 175 GeV/c2 and ascribing the excess to single top quark production, the cross section is measured to be 4.9+2.5-2.2(stat+syst)pb, consistent with measurements performed in independent datasets and with the standard model prediction.

Observation of single top quark production and measurement of |Vtb| with CDF

We report the observation of electroweak single top quark production in 3.2  fb-1 of pp̅ collision data collected by the Collider Detector at Fermilab at √s=1.96  TeV. Candidate events in the W+jets topology with a leptonically decaying W boson are classified as signal-like by four parallel analyses based on likelihood functions, matrix elements, neural networks, and boosted decision trees. These results are combined using a super discriminant analysis based on genetically evolved neural networks in order to improve the sensitivity. This combined result is further combined with that of a search for a single top quark signal in an orthogonal sample of events with missing transverse energy plus jets and no charged lepton. We observe a signal consistent with the standard model prediction but inconsistent with the background-only model by 5.0 standard deviations, with a median expected sensitivity in excess of 5.9 standard deviations. We measure a production cross section of 2.3-0.5+0.6(stat+sys)  pb, extract the value of the Cabibbo-Kobayashi-Maskawa matrix element |Vtb|=0.91-0.11+0.11(stat+sys)±0.07  (theory), and set a lower limit |Vtb|>0.71 at the 95% C.L., assuming mt=175  GeV/c2.

Observation of single top quark production and measurement of |Vtb| with CDF

We report the observation of electroweak single top quark production in 3.2 fb-1 of ppbar collision data collected by the Collider Detector at Fermilab at sqrt{s}=1.96 TeV. Candidate events in the W+jets topology with a leptonically decaying W boson are classified as signal-like by four parallel analyses based on likelihood functions, matrix elements, neural networks, and boosted decision trees. These results are combined using a super discriminant analysis based on genetically evolved neural networks in order to improve the sensitivity. This combined result is further combined with that of a search for a single top quark signal in an orthogonal sample of events with missing transverse energy plus jets and no charged lepton. We observe a signal consistent with the standard model prediction but inconsistent with the background-only model by 5.0 standard deviations, with a median expected sensitivity in excess of 5.9 standard deviations. We measure a production cross section of 2.3+0.6-0.5(stat+sys) pb, extract the CKM matrix element value |Vtb|=0.91+0.11-0.11 (stat+sys)+-0.07(theory), and set a lower limit |Vtb|>0.71 at the 95% confidence level, assuming m_t=175 GeVc^2.

Measurement of the Single-Top-Quark Production Cross Section at CDF

We report a measurement of the single top quark production cross section in 2.2 ~fb-1 of p-pbar collision data collected by the Collider Detector at Fermilab at sqrt{s}=1.96 TeV. Candidate events are classified as signal-like by three parallel analyses which use likelihood, matrix element, and neural network discriminants. These results are combined in order to improve the sensitivity. We observe a signal consistent with the standard model prediction, but inconsistent with the background-only model by 3.7 standard deviations with a median expected sensitivity of 4.9 standard deviations. We measure a cross section of 2.2 +0.7 -0.6(stat+sys) pb, extract the CKM matrix element value |V_{tb}|=0.88 +0.13 -0.12 (stat+sys) +- 0.07(theory), and set the limit |V_{tb}|>0.66 at the 95% C.L.

LIN28B, LIN28A, KISS1, and KISS1R in idiopathic central precocious puberty

Abstract Background Pubertal timing is a strongly heritable trait, but no single puberty gene has been identified. Thus, the genetic background of idiopathic central precocious puberty (ICPP) is poorly understood. Overall, the genetic modulation of pubertal onset most likely arises from the additive effect of multiple genes, but also monogenic causes of ICPP probably exist, as cases of familial ICPP have been reported. Mutations in KISS1 and KISSR, coding for kisspeptin and its receptor, involved in GnRH secretion and puberty onset, have been suggested causative for monogenic ICPP. Variation in LIN28B was associated with timing of puberty in genome-wide association (GWA) studies. LIN28B is a human ortholog of the gene that controls, through microRNAs, developmental timing in C. elegans. In addition, Lin28a transgenic mice manifest the puberty phenotypes identified in the human GWAS. Thus, both LIN28B and LIN28A may have a role in pubertal development and are good candidate genes for monogenic ICPP. Methods Thirty girls with ICPP were included in the study. ICPP was defined by pubertal onset before 8 yrs of age, and a pubertal LH response to GnRH testing. The coding regions of LIN28B, LIN28A, KISS1, and KISS1R were sequenced. The missense change in LIN28B was also screened in 132 control subjects. Results No rare variants were detected in KISS1 or KISS1R in the 30 subjects with ICPP. In LIN28B, one missense change, His199Arg, was found in one subject with ICPP. However, this variant was also detected in one of the 132 controls. No variation in LIN28A was found. Conclusions We did not find any evidence that mutations in LIN28B or LIN28A would underlie ICPP. In addition, we confirmed that mutations in KISS1 and KISS1R are not a common cause for ICPP.