Characterizing Physical Properties of Wetting Paper by Air Coupled Ultrasound and Light

This thesis reports investigations into the paper wetting process and its effects on the surface roughness and the out-of-plane (ZD) stiffness of machine-made paper. The aim of this work was to test the feasibility of employing air-borne ultrasound methods to determine surface roughness (by reflection) and ZD stiffness (by through transmission) of paper during penetration of distilled water, isopropanol and their mixtures. Air-borne ultrasound provides a non-contacting way to evaluate sample structure and mechanics during the liquid penetration event. Contrary to liquid immersion techniques, an air-borne measurement allows studying partial wetting of paper. In addition, two optical methods were developed to reveal the liquid location in paper during wetting. The laser light through transmission method was developed to monitor the liquid location in partially wetted paper. The white light reflection method was primarily used to monitor the penetration of the liquid front in the thickness direction. In the latter experiment the paper was fully wetted. The main results of the thesis were: 1) Liquid penetration induced surface roughening was quantified by monitoring the ultrasound reflection from the paper surface. 2) Liquid penetration induced stiffness alteration in the ZD of paper could be followed by measuring the change in the ultrasound ZD resonance in paper. 3) Through transmitted light revealed the liquid location in the partially wetted paper. 4) Liquid movement in the ZD of the paper could be observed by light reflection. The results imply that the presented ultrasonic means can without contact measure the alteration of paper roughness and stiffness during liquid transport. These methods can help avoiding over engineering the paper which reduces raw material and energy consumption in paper manufacturing. The presented optical means can estimate paper specific wetting properties, such as liquid penetration speed, transport mechanisms and liquid location within the paper structure. In process monitoring, these methods allow process tuning and manufacturing of paper with engineered liquid transport characteristics. With such knowledge the paper behaviour during printing can be predicted. These findings provide new methods for paper printing, surface sizing, and paper coating research.

Reproduction and population structure in European aspen

The European aspen (Populus tremula) is a keystone species for biodiversity in boreal forests. However, the future of aspen may be threatened, because large aspens have mostly been removed from managed forests, whereas regeneration and the long-term persistence of mature trees are subjects of concern in protected areas. Aspen is a pioneer tree, and it can reproduce both sexually by seed and asexually by root suckers. Through asexual reproduction aspen forms clones, groups of genetically identical trees (ramets). In my thesis, I have studied the structure of aspen populations in terms of number, size, clonal and demographic properties. Additionally, I have investigated the emergence and survival of seedlings as well as the seed quantity and quality in crosses between the European and hybrid aspen. To study the regeneration and population structure, mature aspens were recorded in old-growth and managed forests in eastern Finland based on a large-scale inventory (11 400 ha). In addition, small aspen trees were surveyed on sample plots. Clonal structure was investigated both by morphological characters and by DNA-based markers (microsatellites). Seedling emergence and survival was studied with two sowing experiments. With crosses between European and hybrid aspens we wanted to study whether elevated temperatures due to climate change would benefit the different crosses of European and hybrid aspen unequally and thus affect the gene flow between the two species. The average volumes of mature aspen were 5.3 m3/ha in continuous old-growth, and 0.8 m3/ha in managed forests. Results indicate also that large aspen trees in managed forests are a legacy of the past less intensively managed forest landscapes. Long-term persistence of aspen in protected areas can only be secured by restoration measures creating sufficiently large gaps for regeneration. More emphasis should be given to sparing aspens in thinnings and to retaining of mature aspens in regeneration cutting in managed forests. Aspen was found to be spatially aggregated in the landscape. This could be explained by site type, disturbance history and / or limitations in seed dispersal. Clonal structure does not explain the spatial aggregation, since average size of the clones was only 2.3 ramets, and most clones (70 %) consisted of just one ramet. The small size of the clones suggests that most of them are relatively young. Therefore, sexual reproduction may be more common than has previously been thought. Seedling emergence was most successful in mineral soil especially, when the site had been burned. Only few seedlings occurred on humus. Survival of the seedlings was low, and strongly dependent on moisture, but also on seedbed conditions. The seeds were found to maintain their germinability longer than has earlier been thought to be possible. Interspecific crosses produced more seeds with higher quality than intraspecific crosses. When temperature was elevated, germination of hybrid aspen seeds increased more than seeds from P. tremula x P. tremula crosses. These results suggest that hybrid aspen may have a significant genetic impact on the European aspen, and this effect may become strengthened by climate warming.

Evidence for a Narrow Near-Threshold Structure in the J/ψϕ Mass Spectrum in B+→J/ψϕK+ Decays

Evidence is reported for a narrow structure near the $J/\psi\phi$ threshold in exclusive $B^+\to J/\psi\phi K^+$ decays produced in $\bar{p} p $ collisions at $\sqrt{s}=1.96 \TeV$. A signal of $14\pm5$ events, with statistical significance in excess of 3.8 standard deviations, is observed in a data sample corresponding to an integrated luminosity of $2.7 \ifb$, collected by the CDF II detector. The mass and natural width of the structure are measured to be $4143.0\pm2.9(\mathrm{stat})\pm1.2(\mathrm{syst}) \MeVcc$ and $11.7^{+8.3}_{-5.0}(\mathrm{stat})\pm3.7(\mathrm{syst}) \MeVcc$.

Process of burnout: structure, antecedents, and consequences

The major changes that have been witnessed in today's workplaces are challenging the mental well-being of employed people. Stress and burnout are considered to be modern epidemics, and their importance to physical health and work ability has been acknowledged world-wide. The aim of the thesis was to study the concept of burnout as a process proceeding from its antecedents, through the development of the syndrome, and to its outcomes. Several work-related factors considered antecedents of burnout were studied in different occupational groups. The syndrome of burnout is seen as consisting of three dimensions - exhaustion, cynicism and lack of professional efficacy - and different alternatives for the sequential development of these dimensions were tested. Furthermore, several indicators of the severely detrimental health and work ability outcomes of burnout were investigated in a longitudinal study design. The research questions were as follows. 1) Is burnout, as measured with the Maslach Burnout Inventory - General Survey (MBI-GS), a three-dimensional construct and how invariant is the factorial structure across occupations (Finnish) and national samples (Finnish, Swedish and Dutch)? How persistent is exhaustion over time? 2) What is the sequential process of burnout? Is it similar across occupations? How do work stressors relate to the process? 3) How does burnout relate to severe health consequences as well as temporary and chronic work disability according to hospitalization periods, sick-leave episodes and receiving disability pensions? The data were collected between 1986 and 2005. The population of the study consisted of respondents to a company-wide questionnaire survey carried out in 1996-1997 (N=9705, response rate 63%). The participants comprised 6025 blue-collar workers and 3680 white-collar workers. The majority were men (N=7494) and the average age was 43.7 years. In addition, a sample from the population had responded to a questionnaire survey in 1988, which was combined with the 1996 data to form panel data on 713 respondents. The register-based data were collected between 1986 and 2005 from 1) the company's occupational health services' records for a sample of respondents from the 1996 questionnaire survey (sick-leave data), 2) hospitalization records from the Hospital discharge register, and 3) disability pension records from the Finnish Centre for Pensions. These data were combined person by person with the 1996 questionnaire survey data with the help of personal identification numbers which were saved with the study numbers by the researchers. The results showed that burnout consists of three separate but correlating symptoms: exhaustion, cynicism and lack of professional efficacy. As a syndrome, burnout was strongly related to job stressors at work, and seemed to develop from exhaustion through cynicism to lack of professional efficacy in a similar manner among white-collar and blue-collar employees. The results also showed that exhaustion persisted even after eight years of follow-up but did not predict cynicism or lack of professional efficacy after that amount of time. Nor were job stressors longitudinally related to burnout. Longitudinal results were obtained for the severe health-related consequences of burnout. The investigated outcomes represented different phases of health deterioration ranging from sick-leaves and hospitalization periods to receiving work disability pensions. The results showed that burnout syndrome, and its elements of exhaustion and cynicism, were related to future mental and cardiovascular disorders as indicated by hospitalization periods. Burnout was also related to future sick-leave periods due to mental, cardiovascular and musculoskeletal disorders. Of the separate elements, exhaustion was related to the same three categories of disorder, cynicism to mental, musculoskeletal and digestive disorders, and lack of professional efficacy to mental and musculoskeletal disorders. Burnout also predicted receiving disability pensions due to mental and musculoskeletal disorders among initially healthy subjects. Exhaustion was related to receiving disability pensions even when self-reported chronic illness was taken into account. The results suggest that burnout is a multidimensional, chronic, work-related syndrome, which may have serious consequences for health and work ability.