Mesoporous silica- and silicon-based materials as carriers for poorly water soluble drugs

New chemical entities with unfavorable water solubility properties are continuously emerging in drug discovery. Without pharmaceutical manipulations inefficient concentrations of these drugs in the systemic circulation are probable. Typically, in order to be absorbed from the gastrointestinal tract, the drug has to be dissolved. Several methods have been developed to improve the dissolution of poorly soluble drugs. In this study, the applicability of different types of mesoporous (pore diameters between 2 and 50 nm) silicon- and silica-based materials as pharmaceutical carriers for poorly water soluble drugs was evaluated. Thermally oxidized and carbonized mesoporous silicon materials, ordered mesoporous silicas MCM-41 and SBA-15, and non-treated mesoporous silicon and silica gel were assessed in the experiments. The characteristic properties of these materials are the narrow pore diameters and the large surface areas up to over 900 m²/g. Loading of poorly water soluble drugs into these pores restricts their crystallization, and thus, improves drug dissolution from the materials as compared to the bulk drug molecules. In addition, the wide surface area provides possibilities for interactions between the loaded substance and the carrier particle, allowing the stabilization of the system. Ibuprofen, indomethacin and furosemide were selected as poorly soluble model drugs in this study. Their solubilities are strongly pH-dependent and the poorest (< 100 µg/ml) at low pH values. The pharmaceutical performance of the studied materials was evaluated by several methods. In this work, drug loading was performed successfully using rotavapor and fluid bed equipment in a larger scale and in a more efficient manner than with the commonly used immersion methods. It was shown that several carrier particle properties, in particular the pore diameter, affect the loading efficiency (typically ~25-40 w-%) and the release rate of the drug from the mesoporous carriers. A wide pore diameter provided easier loading and faster release of the drug. The ordering and length of the pores also affected the efficiency of the drug diffusion. However, these properties can also compensate the effects of each other. The surface treatment of porous silicon was important in stabilizing the system, as the non-treated mesoporous silicon was easily oxidized at room temperature. Different surface chemical treatments changed the hydrophilicity of the porous silicon materials and also the potential interactions between the loaded drug and the particle, which further affected the drug release properties. In all of the studies, it was demonstrated that loading into mesoporous silicon and silica materials improved the dissolution of the poorly soluble drugs as compared to the corresponding bulk compounds (e.g. after 30 min ~2-7 times more drug was dissolved depending on the materials). The release profile of the loaded substances remained similar also after 3 months of storage at 30°C/56% RH. The thermally carbonized mesoporous silicon did not compromise the Caco-2 monolayer integrity in the permeation studies and improved drug permeability was observed. The loaded mesoporous silica materials were also successfully compressed into tablets without compromising their characteristic structural and drug releasing properties. The results of this research indicated that mesoporous silicon/silica-based materials are promising materials to improve the dissolution of poorly water soluble drugs. Their feasibility in pharmaceutical laboratory scale processes was also confirmed in this thesis.

Dental health and school-based health education among 15-year-olds in Tehran, Iran

The aim of the present study was to assess dental health and its determinants among 15-year-olds in Tehran, Iran and to evaluate the impact of a school-based educational intervention on their oral cleanliness and gingival health. The total sample comprised 506 students. Data collection was performed through a clinical dental examination and a self-administered structured questionnaire. This questionnaire covered the student s background information, socio-economic status, self-perceived dental health, tooth-brushing, and smoking. The clinical dental examination covered caries experience, gingival status, dental plaque status, and orthodontic treatment needs. Participation was voluntary, and all students responded to the questionnaire. Only three students refused the clinical dental examination. The intervention was based on exposing students to dental health education through a leaflet and a videotape designed for the present study. The outcome examinations took place 12 weeks after the baseline among the three groups of the intervention trial (leaflet, videotape, and control). High participation rates at the baseline and scanty drop-outs (7%) in the intervention speak for reliability of the results. Mean value of the DMFT (D=decayed, M=missing, and F=filled teeth) index of the 15-year-olds was 2.1, which comprised DT=0.9, MT=0.2, and FT=1.0 with no gender differences. Dental plaque existed on at least one index tooth of all students, and healthy periodontium (Community Periodontal Index=0) was found in less than 10% of students. Need for caries treatment existed in 40% of students, for scaling in 24%, for oral hygiene instructions in all, and for orthodontic treatment in 26%. Students with the highest level of parents education had fewer dental caries (36% vs. 48%) and less dental plaque (77% vs. 88%). Of all students, 78% assessed their dental health as good or better. Even more of those with their DMFT=0 (73% vs. 27%) and DT=0 (68% vs. 32%) assessed their dental health as good or better. Smokers comprised 5% of the boys and 2% of the girls. Smoking was common among students of less-educated parents (6% vs. 3%). Of all students, 26% reported twice-daily tooth-brushing; girls (38% vs. 15%) and those of higher socio-economic background (33% vs. 17%) did so more frequently. The best predictors for a good level of oral cleanliness were female gender or twice-daily tooth-brushing. The present study demonstrated that a school-based educational intervention can be effective in the short term in improving the oral cleanliness and gingival health of adolescents. At least 50% reduction in numbers of teeth with dental plaque compared to baseline was achieved by 58% of the students in the leaflet group, by 37% in the videotape group, and by 10% of the controls. Corresponding figures for gingival bleeding were 72%, 64%, and 30%. For improving the oral cleanliness and gingival health of adolescents in countries such as Iran with a developing oral health system, school-based educational intervention should be established with focus on oral self-care and oral health education messages. Emphasizing the immediate gains from good oral hygiene, such as fresh breath, clean teeth, and attractive appearance should be key aspects for motivating these adolescents to learn and maintain good dental health, whilst in planning school-based dental health intervention, special attention should be given to boys and those with lower socio-economic status. Author s address: Reza Yazdani, Department of Oral Public Health, Institute of Dentistry, University of Helsinki, P.O. Box 41, FI-00014 Helsinki, Finland. E-mail: reza.yazdani@helsinki.fi

Smoking from Adolescence to Adulthood : A 15-year Follow-up of the North Karelia Youth Project

The aim of the study was to examine the effects of a smoking prevention program and smoking from early adolescence to early adulthood by using longitudinal data. In addition, predictors of smoking, smoking cessation, and associations of smoking with socio-economic factors and other health behaviours were assessed. The data was gathered in connection with the North Karelia Youth Project follow-up study during 15 years. A two-year cardiovascular disease risk factor prevention program was carried out among students from grades seven to nine in four schools in North Karelia. Two schools were selected from Kuopio province for the control schools. The North Karelia Project, a community-based cardiovascular disease prevention program, was implemented in the same area. At the baseline in 1978 the subjects were 13-year-olds (n=903) and in the following surveys 15-, 16-, 17-, 21- and 28-year-olds. The parents of the subjects were studied twice, in 1978 and 1980. A two-year intervention based on social influence approach prevented the onset of smoking for several years. The continuity of smoking from adolescence to adulthood was strong: most adolescent smokers were still smoking in adulthood. Moreover, approximately half of the 28-year-old smokers had started smoking after the age of 15. Previous smoking status and smoking by friends were the most important predictors of smoking. One third of all adolescent smokers had stopped smoking before the age of 28, averaging at 2.3 % annual decline. The socioeconomic status of the subject and, especially, education were strongly related to smoking, the lower socioeconomic groups smoking the most. Parental socioeconomic status and intergenerational social mobility were not significantly related to the smoking of the subject in adolescence or adulthood. Smoking was associated positively with the use of alcohol and negatively with physical activity from adolescence to adulthood. The results support the feasibility of a school-based social influence program with a community-based program in smoking prevention among adolescents. Strong continuity of smoking from adolescence to adulthood supports the importance of preventing the onset of smoking in adolescence. It would be useful to continue prevention programs also after the comprehensive school, since so many young start smoking after that. It would likewise be important to develop cessation programs tailor-made for adolescents and young adults. Additionally, the results support the importance of using methods based on social influence in smoking prevention and cessation programs, targeting especially such risk groups as those with low socioeconomic status as well as those with other unhealthy behaviours.

Glycoalkaloid Content and Starch Structure in Solanum Species and Interspecific Somatic Potato Hybrids

When genome sections of wild Solanum species are bred into the cultivated potato (S. tuberosum L.) to obtain improved potato cultivars, the new cultivars must be evaluated for their beneficial and undesirable traits. Glycoalkaloids present in Solanum species are known for their toxic as well as for beneficial effects on mammals. On the other hand, glycoalkaloids in potato leaves provide natural protection against pests. Due to breeding, glycoalkaloid profile of the plant is affected. In addition, the starch properties in potato tubers can be affected as a result of breeding, because the crystalline properties are determined by the botanical source of the starch. Starch content and composition affect the texture of cooked and processed potatoes. In order to determine glycoalkaloid contents in Solanum species, simultaneous separation of glycoalkaloids and aglycones using reversed-phase high-performance liquid chromatography (HPLC) was developed. Clean-up of foliage samples was improved using a silica-based strong cation exchanger instead of octadecyl phases in solid-phase extraction. Glycoalkaloids alpha-solanine and alpha-chaconine were detected in potato tubers of cvs. Satu and Sini. The total glycoalkaloid concentration of non-peeled and immature tubers was at an acceptable level (under 20 mg/100 g of FW) in the cv. Satu, whereas concentration in cv. Sini was 23 mg/100 g FW. Solanum species (S. tuberosum, S. brevidens, S. acaule, and S. commersonii) and interspecific somatic hybrids (brd + tbr, acl + tbr, cmm + tbr) were analyzed for their glycoalkaloid contents using liquid chromatography-electrospray ionization-mass spectrometry (LC-ESI-MS). The concentrations in the tubers of the brd + tbr and acl + tbr hybrids remained under 20 mg/100 g FW. Glycoalkaloid concentration in the foliage of the Solanum species was between 110 mg and 890 mg/100 g FW. However, the concentration in the foliage of S. acaule was as low as 26 mg/100 g FW. The total concentrations of brd + tbr, acl + tbr, and cmm + tbr hybrid foliages were 88 mg, 180 mg, and 685 mg/100 g FW, respectively. Glycoalkaloids of both parental plants as well as new combinations of aglycones and saccharides were detected in somatic hybrids. The hybrids contained mainly spirosolanes, and glycoalkaloid structures having no 5,6-double bond in the aglycone. Based on these results, the glycoalkaloid profiles of the hybrids may represent a safer and more beneficial spectrum of glycoalkaloids than that found in currently cultivated varieties. Starch nanostructure of three different cultivars (Satu, Saturna, and Lady Rosetta), a wild species S. acaule, and interspecific somatic hybrids were examined by wide-angle and small-angle X-ray scattering (WAXS, SAXS). For the first time, the measurements were conducted on fresh potato tuber samples. Crystallinity of starch, average crystallite size, and lamellar distance were determined from the X-ray patterns. No differences in the starch nanostructure between the three different cultivars were detected. However, tuber immaturity was detected by X-ray scattering methods when large numbers of immature and mature samples were measured and the results were compared. The present study shows that no significant changes occurred in the nanostructures of starches resulting from hybridizations of potato cultivars.

Loading of itraconazole into porous silica and silicon microparticles: characterization and dissolution tests

Most new drug molecules discovered today suffer from poor bioavailability. Poor oral bioavailability results mainly from poor dissolution properties of hydrophobic drug molecules, because the drug dissolution is often the rate-limiting event of the drug’s absorption through the intestinal wall into the systemic circulation. During the last few years, the use of mesoporous silica and silicon particles as oral drug delivery vehicles has been widely studied, and there have been promising results of their suitability to enhance the physicochemical properties of poorly soluble drug molecules. Mesoporous silica and silicon particles can be used to enhance the solubility and dissolution rate of a drug by incorporating the drug inside the pores, which are only a few times larger than the drug molecules, and thus, breaking the crystalline structure into a disordered, amorphous form with better dissolution properties. Also, the high surface area of the mesoporous particles improves the dissolution rate of the incorporated drug. In addition, the mesoporous materials can also enhance the permeability of large, hydrophilic drug substances across biological barriers. T he loading process of drugs into silica and silicon mesopores is mainly based on the adsorption of drug molecules from a loading solution into the silica or silicon pore walls. There are several factors that affect the loading process: the surface area, the pore size, the total pore volume, the pore geometry and surface chemistry of the mesoporous material, as well as the chemical nature of the drugs and the solvents. Furthermore, both the pore and the surface structure of the particles also affect the drug release kinetics. In this study, the loading of itraconazole into mesoporous silica (Syloid AL-1 and Syloid 244) and silicon (TOPSi and TCPSi) microparticles was studied, as well as the release of itraconazole from the microparticles and its stability after loading. Itraconazole was selected for this study because of its highly hydrophobic and poorly soluble nature. Different mesoporous materials with different surface structures, pore volumes and surface areas were selected in order to evaluate the structural effect of the particles on the loading degree and dissolution behaviour of the drug using different loading parameters. The loaded particles were characterized with various analytical methods, and the drug release from the particles was assessed by in vitro dissolution tests. The results showed that the loaded drug was apparently in amorphous form after loading, and that the loading process did not alter the chemical structure of the silica or silicon surface. Both the mesoporous silica and silicon microparticles enhanced the solubility and dissolution rate of itraconazole. Moreover, the physicochemical properties of the particles and the loading procedure were shown to have an effect on the drug loading efficiency and drug release kinetics. Finally, the mesoporous silicon particles loaded with itraconazole were found to be unstable under stressed conditions (at 38 qC and 70 % relative humidity).

European Union and the developing nations' external debt : EU-15's debt policy, 1960–2008

This Master's Thesis defines the debt policy of the current European Union Member States towards the developing nations. Since no official policy for debt exists in the EU, it is defined to include debt practices (loans and debt relief in development cooperation) and debt within the EU development policy framework. This study (1) describes how the issue of external debt appears in the development policy framework, (2) compares EU Member States' given loans and debt relief to grants for the developing nations (1960s to the 2000s), and (3) measures the current orientation in ODA of each EU Member State between grant aid and loan aid using the Grant-Loan Index (GLI). Theoretical aspects include reasons for selecting between loans (Bouchet 1987) and grants (Odedokun 2004, O'Brien and Williams 2007), policy context of the EU (Van Reisen 2007) and the meaning of external debt in the set-up between the North and the South. In terms of history, the events and impact of the colonial period (where loans have originated) are overviewed and compared in light of today's policies. Development assistance statistics are derived from the OECD DAC statistics portal and EU development policy framework documents from the EU portal. Methodologically, the structure of this study is from policy analysis (Barrien 1999, Hill 2008, Berndtson 2008), but it has been modified to fit the needs of studying a non-official policy. EU Member States are divided into three groups by Carbone (2007a), the Big-3, Northern and Southern donors, based on common development assistance characteristics. The Grant-Loan Index is used to compare Carbone's model, which measures quality of aid, to the GLI measuring the structure of aid. Results indicate that EU- 15 countries (active in debt practices) differ in terms of timing, stability and equality of debt practices in the long-term (1960s to the 2000s). In terms of current practices, (2000-2008), it is noted that there lies a disparity between the actual practices and the way in which external debt is represented in the development policy framework, although debt practices form a relevant portion of total ODA practices for many EU-15 Member States, the issue itself plays a minor role in development policy documents. Carbone’s group division applies well to the Grant – Loan Index’s results, indicating that countries with similar development policy behaviour have similarities in debt policy behaviour, with one exception: Greece. On the basis of this study, it is concluded that EU development policy framework content in terms of external debt and debt practices are not congruent. The understanding of this disparity between the policy outline and differences in long-term practices is relevant in both, reaching the UN’s Millennium Development Goals, and in the actual process of developing development aid.

Silva Fennica Vol. 15, 1981.

Julkaistu Silva Fennica Vol. 15(4) -numeron liitteenä.

Annales Societatis zoologicae-botanicae Fennicae Vanamo tom. 15

Kielet saksa ja suomi.

Annales Societatis zoologicae-botanicae Fennicae Vanamo tom. 15 Beiheft

Tiivistelmän kieli suomi.