A quantum chemical investigation of the metal centres in cytochrome c oxidase

Quantum effects are often of key importance for the function of biological systems at molecular level. Cellular respiration, where energy is extracted from the reduction of molecular oxygen to water, is no exception. In this work, the end station of the electron transport chain in mitochondria, cytochrome c oxidase, is investigated using quantum chemical methodology. Cytochrome c oxidase contains two haems, haem a and haem a3. Haem a3, with its copper companion, CuB, is involved in the final reduction of oxygen into water. This binuclear centre receives the necessary electrons from haem a. Haem a, in turn, receives its electrons from a copper ion pair in the vicinity, called CuA. Density functional theory (DFT) has been used to clarify the charge and spin distributions of haem a, as well as changes in these during redox activity. Upon reduction, the added electron is shown to be evenly distributed over the entire haem structure, important for the accommodation of the prosthetic group within the protein. At the same time, the spin distribution of the open-shell oxidised state is more localised to the central iron. The exact spin density distribution has been disputed in the literature, however, different experiments indicating different distributions of the unpaired electron. The apparent contradiction is shown to be due to the false assumption of a unit amount of unpaired electron density; in fact, the oxidised state has about 1.3 unpaired electrons. The validity of the DFT results have been corroborated by wave function based coupled cluster calculations. Point charges, for use in classical force field based simulations, have been parameterised for the four metal centres, using a newly developed methodology. In the procedure, the subsystem for which point charges are to be obtained, is surrounded by an outer region, with the purpose of stabilising the inner region, both electronically and structurally. Finally, the possibility of vibrational promotion of the electron transfer step between haem a and a3 has been investigated. Calculating the full vibrational spectra, at DFT level, of a combined model of the two haems, revealed several normal modes that do shift electron density between the haems. The magnitude of the shift was found to be moderate, at most. The proposed mechanism could have an assisting role in the electron transfer, which still seems to be dominated by electron tunnelling.

Quantum Chemical Studies on Tropospheric Nucleation Mechanisms Involving Sulfuric Acid

Nucleation is the first step of the process by which gas molecules in the atmosphere condense to form liquid or solid particles. Despite the importance of atmospheric new-particle formation for both climate and health-related issues, little information exists on its precise molecular-level mechanisms. In this thesis, potential nucleation mechanisms involving sulfuric acid together with either water and ammonia or reactive biogenic molecules are studied using quantum chemical methods. Quantum chemistry calculations are based on the numerical solution of Schrödinger's equation for a system of atoms and electrons subject to various sets of approximations, the precise details of which give rise to a large number of model chemistries. A comparison of several different model chemistries indicates that the computational method must be chosen with care if accurate results for sulfuric acid - water - ammonia clusters are desired. Specifically, binding energies are incorrectly predicted by some popular density functionals, and vibrational anharmonicity must be accounted for if quantitatively reliable formation free energies are desired. The calculations reported in this thesis show that a combination of different high-level energy corrections and advanced thermochemical analysis can quantitatively replicate experimental results concerning the hydration of sulfuric acid. The role of ammonia in sulfuric acid - water nucleation was revealed by a series of calculations on molecular clusters of increasing size with respect to all three co-ordinates; sulfuric acid, water and ammonia. As indicated by experimental measurements, ammonia significantly assists the growth of clusters in the sulfuric acid - co-ordinate. The calculations presented in this thesis predict that in atmospheric conditions, this effect becomes important as the number of acid molecules increases from two to three. On the other hand, small molecular clusters are unlikely to contain more than one ammonia molecule per sulfuric acid. This implies that the average NH3:H2SO4 mole ratio of small molecular clusters in atmospheric conditions is likely to be between 1:3 and 1:1. Calculations on charged clusters confirm the experimental result that the HSO4- ion is much more strongly hydrated than neutral sulfuric acid. Preliminary calculations on HSO4- NH3 clusters indicate that ammonia is likely to play at most a minor role in ion-induced nucleation in the sulfuric acid - water system. Calculations of thermodynamic and kinetic parameters for the reaction of stabilized Criegee Intermediates with sulfuric acid demonstrate that quantum chemistry is a powerful tool for investigating chemically complicated nucleation mechanisms. The calculations indicate that if the biogenic Criegee Intermediates have sufficiently long lifetimes in atmospheric conditions, the studied reaction may be an important source of nucleation precursors.

Process Analytical Technology Approach on Fluid Bed Granulation and Drying : Identifying Critical Relationships and Constructing the Design Space

Fluid bed granulation is a key pharmaceutical process which improves many of the powder properties for tablet compression. Dry mixing, wetting and drying phases are included in the fluid bed granulation process. Granules of high quality can be obtained by understanding and controlling the critical process parameters by timely measurements. Physical process measurements and particle size data of a fluid bed granulator that are analysed in an integrated manner are included in process analytical technologies (PAT). Recent regulatory guidelines strongly encourage the pharmaceutical industry to apply scientific and risk management approaches to the development of a product and its manufacturing process. The aim of this study was to utilise PAT tools to increase the process understanding of fluid bed granulation and drying. Inlet air humidity levels and granulation liquid feed affect powder moisture during fluid bed granulation. Moisture influences on many process, granule and tablet qualities. The approach in this thesis was to identify sources of variation that are mainly related to moisture. The aim was to determine correlations and relationships, and utilise the PAT and design space concepts for the fluid bed granulation and drying. Monitoring the material behaviour in a fluidised bed has traditionally relied on the observational ability and experience of an operator. There has been a lack of good criteria for characterising material behaviour during spraying and drying phases, even though the entire performance of a process and end product quality are dependent on it. The granules were produced in an instrumented bench-scale Glatt WSG5 fluid bed granulator. The effect of inlet air humidity and granulation liquid feed on the temperature measurements at different locations of a fluid bed granulator system were determined. This revealed dynamic changes in the measurements and enabled finding the most optimal sites for process control. The moisture originating from the granulation liquid and inlet air affected the temperature of the mass and pressure difference over granules. Moreover, the effects of inlet air humidity and granulation liquid feed rate on granule size were evaluated and compensatory techniques used to optimize particle size. Various end-point indication techniques of drying were compared. The ∆T method, which is based on thermodynamic principles, eliminated the effects of humidity variations and resulted in the most precise estimation of the drying end-point. The influence of fluidisation behaviour on drying end-point detection was determined. The feasibility of the ∆T method and thus the similarities of end-point moisture contents were found to be dependent on the variation in fluidisation between manufacturing batches. A novel parameter that describes behaviour of material in a fluid bed was developed. Flow rate of the process air and turbine fan speed were used to calculate this parameter and it was compared to the fluidisation behaviour and the particle size results. The design space process trajectories for smooth fluidisation based on the fluidisation parameters were determined. With this design space it is possible to avoid excessive fluidisation and improper fluidisation and bed collapse. Furthermore, various process phenomena and failure modes were observed with the in-line particle size analyser. Both rapid increase and a decrease in granule size could be monitored in a timely manner. The fluidisation parameter and the pressure difference over filters were also discovered to express particle size when the granules had been formed. The various physical parameters evaluated in this thesis give valuable information of fluid bed process performance and increase the process understanding.

Investigating physical properties of solid dosage forms during pharmaceutical processing : Process analytical applications of vibrational spectroscopy

In order to improve and continuously develop the quality of pharmaceutical products, the process analytical technology (PAT) framework has been adopted by the US Food and Drug Administration. One of the aims of PAT is to identify critical process parameters and their effect on the quality of the final product. Real time analysis of the process data enables better control of the processes to obtain a high quality product. The main purpose of this work was to monitor crucial pharmaceutical unit operations (from blending to coating) and to examine the effect of processing on solid-state transformations and physical properties. The tools used were near-infrared (NIR) and Raman spectroscopy combined with multivariate data analysis, as well as X-ray powder diffraction (XRPD) and terahertz pulsed imaging (TPI). To detect process-induced transformations in active pharmaceutical ingredients (APIs), samples were taken after blending, granulation, extrusion, spheronisation, and drying. These samples were monitored by XRPD, Raman, and NIR spectroscopy showing hydrate formation in the case of theophylline and nitrofurantoin. For erythromycin dihydrate formation of the isomorphic dehydrate was critical. Thus, the main focus was on the drying process. NIR spectroscopy was applied in-line during a fluid-bed drying process. Multivariate data analysis (principal component analysis) enabled detection of the dehydrate formation at temperatures above 45°C. Furthermore, a small-scale rotating plate device was tested to provide an insight into film coating. The process was monitored using NIR spectroscopy. A calibration model, using partial least squares regression, was set up and applied to data obtained by in-line NIR measurements of a coating drum process. The predicted coating thickness agreed with the measured coating thickness. For investigating the quality of film coatings TPI was used to create a 3-D image of a coated tablet. With this technique it was possible to determine coating layer thickness, distribution, reproducibility, and uniformity. In addition, it was possible to localise defects of either the coating or the tablet. It can be concluded from this work that the applied techniques increased the understanding of physico-chemical properties of drugs and drug products during and after processing. They additionally provided useful information to improve and verify the quality of pharmaceutical dosage forms

Effects of the digital subtitling software on the subtitling process : A survey among Finnish professional television subtitlers

Tutkielma käsittelee suomalaisten televisiotekstittäjien ammatillisuutta, käännösprosessia ja digitaalisten tekstitysohjelmien vaikutuksia tekstitysprosessiin ammattitekstittäjien näkökulmasta. Suomen television digitalisoituminen on aiheuttanut mullistuksia myös tekstitysalalla kun tekstitettävä kuvamateriaali on ryhdytty toimittamaan käännöstoimistoille ja tekstittäjille digitaalisena. Teoriaosuudessa käsitellään käännös- ja tekstitystutkimusta sekä koulutusta Suomessa, ammattitaitoa ja ammatillisuutta sekä kääntämisen apukeinoja. Tekstittäminen esitellään erikoistuneena kääntämisen muotona. On kuitenkin myös huomioitava, että kääntäminen on yksi vaihe tekstitysprosessissa. Teoriaosuus päättyy suomalaisten televisiotekstittäjien arjen ja työkentän nykytilanteen käsittelyyn – tekstittäjät työskentelevät monenlaisilla työehdoilla ja laadun kriteerit saatetaan joutua arvioimaan uudelleen. Empiirisen osan alussa esitetään, että suomalaisia televisiotekstittäjiä on haastateltu yllättävän vähän, ja Jääskeläisen ajatuksiin nojaten mainitaan, että tekstittämisen alalla on vielä paljon tutkimatta – etenkin suomalaisesta tekstitysprosessista löytyy tutkittavaa. Tutkimuskohde on ammatikseen televisioon tekstityksiä tekevät kääntäjät. Suomalaiselle tekstitykseen erikoistuneelle käännöstoimistolle työskenteleville tekstittäjille lähetettiin alkutalvesta 2008 kyselylomake, jolla kartoitettiin sekä monivalintakysymyksillä että avoimilla kysymyksillä heidän ammatillisuuttaan, työmenetelmiään, käännös- ja tekstitysprosessiaan, ammattiylpeyttään ja -identiteettiään, ajanhallintaansa, sekä heidän käyttämäänsä digitaalista tekstitysohjelmaa. Tutkimuksessa kävi ilmi, että lähes kolmanneksella vastaajista on ammatistaan neutraali tai jopa negatiivinen käsitys. Näitä tekstittäjiä yhdistää se seikka, että kaikilla on alle 5 vuotta kokemusta alalta. Valtaosa vastanneista on kuitenkin ylpeitä siitä, että toimivat suomen kielen ammattilaisina. Tekstitysprosessi oli lomakkeessa jaettu esikatseluvaiheeseen, käännösvaiheeseen, ajastamisvaiheeseen ja korjauskatseluvaiheeseen. Tekstittäjät pyydettiin mm. arvioimaan tekstitysprosessinsa kokonaiskestoa. Kestoissa ilmeni suuria eroavaisuuksia, joista ainakin osa korreloi kokemuksen kanssa. Runsas puolet vastaajista on hankkinut digitaalisen tekstitysohjelmiston käyttöönsä ja osa ajastaa edelleen käännöstoimistossa muun muassa ohjelmiston kalleuden vuoksi. Digitaalisen ohjelmiston myötä tekstitysprosessiin ja työkäytänteisiin on tullut muutoksia, kun videonauhureista ja televisioista on siirrytty pelkän tietokoneen käyttöön. On mahdollista tehdä etätyötä kaukomailta käsin, kääntää ja ajastaa lomittain tai tehdä esiajastus ja kääntää sitten. Digitaalinen tekniikka on siis mahdollistanut tekstitysprosessin muuttumisen ja vaihtoehtoiset työmenetelmät, mutta kaikista menetelmistä ei välttämättä ole tekstittäjälle hyötyä. Perinteinen tekstitysprosessi (esikatselu, repliikkijakojen merkitseminen käsikirjoitukseen, kääntäminen ja repliikkien laadinta, korjaukset ja tarkastuskatselu) vaikuttaa edelleen tehokkaimmalta. Vaikka työkäytänteet eroavat toisistaan, kokonaiskäsitys on se, että digitalisoitumisen alkukangertelujen jälkeen tekstittäjien työskentely on tehostunut.

Language change as an evolutionary process

In the thesis it is discussed in what ways concepts and methodology developed in evolutionary biology can be applied to the explanation and research of language change. The parallel nature of the mechanisms of biological evolution and language change is explored along with the history of the exchange of ideas between these two disciplines. Against this background computational methods developed in evolutionary biology are taken into consideration in terms of their applicability to the study of historical relationships between languages. Different phylogenetic methods are explained in common terminology, avoiding the technical language of statistics. The thesis is on one hand a synthesis of earlier scientific discussion, and on the other an attempt to map out the problems of earlier approaches in addition to finding new guidelines in the study of language change on their basis. Primarily literature about the connections between evolutionary biology and language change, along with research articles describing applications of phylogenetic methods into language change have been used as source material. The thesis starts out by describing the initial development of the disciplines of evolutionary biology and historical linguistics, a process which right from the beginning can be seen to have involved an exchange of ideas concerning the mechanisms of language change and biological evolution. The historical discussion lays the foundation for the handling of the generalised account of selection developed during the recent few decades. This account is aimed for creating a theoretical framework capable of explaining both biological evolution and cultural change as selection processes acting on self-replicating entities. This thesis focusses on the capacity of the generalised account of selection to describe language change as a process of this kind. In biology, the mechanisms of evolution are seen to form populations of genetically related organisms through time. One of the central questions explored in this thesis is whether selection theory makes it possible to picture languages are forming populations of a similar kind, and what a perspective like this can offer to the understanding of language in general. In historical linguistics, the comparative method and other, complementing methods have been traditionally used to study the development of languages from a common ancestral language. Computational, quantitative methods have not become widely used as part of the central methodology of historical linguistics. After the fading of a limited popularity enjoyed by the lexicostatistical method since the 1950s, only in the recent years have also the computational methods of phylogenetic inference used in evolutionary biology been applied to the study of early language history. In this thesis the possibilities offered by the traditional methodology of historical linguistics and the new phylogenetic methods are compared. The methods are approached through the ways in which they have been applied to the Indo-European languages, which is the most thoroughly investigated language family using both the traditional and the phylogenetic methods. The problems of these applications along with the optimal form of the linguistic data used in these methods are explored in the thesis. The mechanisms of biological evolution are seen in the thesis as parallel in a limited sense to the mechanisms of language change, however sufficiently so that the development of a generalised account of selection is deemed as possibly fruiful for understanding language change. These similarities are also seen to support the validity of using phylogenetic methods in the study of language history, although the use of linguistic data and the models of language change employed by these models are seen to await further development.

Space in Musical Semiosis : An Abductive Theory of the Musical Composition Process

Space in musical semiosis is a study of musical meaning, spatiality and composition. Earlier studies on musical composition have not adequately treated the problems of musical signification. Here, composition is considered an epitomic process of musical signification. Hence the core problems of composition theory are core problems of musical semiotics. The study employs a framework of naturalist pragmatism, based on C. S. Peirce’s philosophy. It operates on concepts such as subject, experience, mind and inquiry, and incorporates relevant ideas of Aristotle, Peirce and John Dewey into a synthetic view of esthetic, practic, and semiotic for the benefit of grasping musical signification process as a case of semiosis in general. Based on expert accounts, music is depicted as real, communicative, representational, useful, embodied and non-arbitrary. These describe how music and the musical composition process are mental processes. Peirce’s theories are combined with current morphological theories of cognition into a view of mind, in which space is central. This requires an analysis of space, and the acceptance of a relativist understanding of spatiality. This approach to signification suggests that mental processes are spatially embodied, by virtue of hard facts of the world, literal representations of objects, as well as primary and complex metaphors each sharing identities of spatial structures. Consequently, music and the musical composition process are spatially embodied. Composing music appears as a process of constructing metaphors—as a praxis of shaping and reshaping features of sound, representable from simple quality dimensions to complex domains. In principle, any conceptual space, metaphorical or literal, may set off and steer elaboration, depending on the practical bearings on the habits of feeling, thinking and action, induced in musical communication. In this sense, it is evident that music helps us to reorganize our habits of feeling, thinking, and action. These habits, in turn, constitute our existence. The combination of Peirce and morphological approaches to cognition serves well for understanding musical and general signification. It appears both possible and worthwhile to address a variety of issues central to musicological inquiry in the framework of naturalist pragmatism. The study may also contribute to the development of Peircean semiotics.