Microbes in the tailoring of barley malt properties

Microbes have a decisive role in the barley-malt-beer chain. A major goal of this thesis was to study the relationships between microbial communities and germinating grains during malting. Furthermore, the study provided a basis for tailoring of malt properties with natural, malt-derived microbes. The malting ecosystem is a dynamic process, exhibiting continous change. The first hours of steeping and kilning were the most important steps in the process with regard to microbiological quality. The microbial communities consisting of various types of bacteria, yeasts and filamentous fungi formed complex biofilms in barley tissues and were well-protected. Inhibition of one microbial population within the complex ecosystem led to an increase of non-suppressed populations, which must be taken into account because a shift in microbial community dynamics may be undesirable. Both bacterial and fungal communities should be monitored simultaneously. Using different molecular approaches we showed that the diversity of microbes in the malting ecosystem was greater than expected. Even some new microbial groups were found in the malting ecosystem. Suppression of Gram-negative bacteria during steeping was advanategous for grain germination and malt brewhouse performance. Fungal communities including both filamentous fungi and yeasts significantly contributed to the production of microbial beta-glucanases and xylanases, and were also involved in proteolysis. Well-characterized lactic acid bacteria (Lactobacillus plantarum VTT E-78076 and Pediococcus pentosaceus VTT E-90390) proved to be an effective way of balancing the microbial communities in malting. Furthermore, they had positive effects on malt characteristics and notably improved wort separation. Previously the significance of yeasts in the malting ecosystem has been largely underestimated. This study showed that yeast community was an important part of the industrial malting ecosystem. Yeasts produced extracellular hydrolytic enzymes with a potentially positive contribution to malt processability. Furthermore, several yeasts showed strong antagonistic activity against field and storage moulds. Addition of a selected yeast culture (Pichia anomala VTT C-04565) into steeping restricted Fusarium growth and hydrophobin production and thus prevented beer gushing. Addition of P. anomala C565 into steeping water tended to retard wort filtration, but the filtration was improved when the yeast culture was combined with L. plantarum E76. The combination of different microbial cultures offers a possibility to use ther different properties, thus making the system more robust. Improved understanding of complex microbial communities and their role in malting enables a more controlled process management and the production of high quality malt with tailored properties

Managing Project Business Development: an Inter-Organizational and Intra-Organizational Perspective (summary section only)

The driving force behind this study is the gap between the reality of the firms engaged in project business and the available studies covering project management and business process development. Previous studies show that project-based organizations were ‘immature’ in terms of the project-management ‘maturity model’, as few firms were found to be optimizing processes. Even within those, very little attention was paid to combine inter-organizational and intra-organizational perspectives. In this study an effort is made to elaborate some thoughts and views on project management, which interrelate firms’ external and internal activities. In line with the integration, the dissertation uses an approach to the management of project-business interdependencies in the networks of actors, activities and resources. Firstly, the study develops an understanding for inter-organizational perspectives by exploring the complementarities of process activities in the basic development of project business. It presents a framework that is elaborated on the basis of the reciprocal interactions of activities within and outside the organization—thus providing a coherent basis for continuous business-process improvement. In addition, the study presents new tools that can be used to develop project-business processes in each of its functional areas. The research demonstrates how project-business activities can be optimized using the right resources at the right time with the right actors and the right actions. The selected five articles included in this dissertation explain the basic framework for the development of project business. Each paper covers various aspects of inter-organizational and intra-organizational perspectives for project management. The study develops a valuable and procedural model for business-process improvement using the Delphi method that can be used not only in academia but also as a guide for practitioners that takes them through a series of well-defined steps when making informed, consistent and efficient changes to their business processes.

Lean Thinking in Software Development : Impacts of Kanban on Projects

The history of software development in a somewhat systematical way has been performed for half a century. Despite this time period, serious failures in software development projects still occur. The pertinent mission of software project management is to continuously achieve more and more successful projects. The application of agile software methods and more recently the integration of Lean practices contribute to this trend of continuous improvement in the software industry. One such area warranting proper empirical evidence is the operational efficiency of projects. In the field of software development, Kanban as a process management method has gained momentum recently, mostly due to its linkages to Lean thinking. However, only a few empirical studies investigate the impacts of Kanban on projects in that particular area. The aim of this doctoral thesis is to improve the understanding of how Kanban impacts on software projects. The research is carried out in the area of Lean thinking, which contains a variety of concepts including Kanban. This article-type thesis conducts a set of case studies expanded with the research strategy of quasi-controlled experiment. The data-gathering techniques of interviews, questionnaires, and different types of observations are used to study the case projects, and thereby to understand the impacts of Kanban on software development projects. The research papers of the thesis are refereed, international journal and conference publications. The results highlight new findings regarding the application of Kanban in the software context. The key findings of the thesis suggest that Kanban is applicable to software development. Despite its several benefits reported in this thesis, the empirical evidence implies that Kanban is not all-encompassing but requires additional practices to keep development projects performing appropriately. Implications for research are given, as well. In addition to these findings, the thesis contributes in the area of plan-driven software development by suggesting implications both for research and practitioners. As a conclusion, Kanban can benefit software development projects but additional practices would increase its potential for the projects.

A model Integrating the Facilities Management Process with the Building End User’s Business Process (ProFacil)

The ProFacil model is a generic process model defined as a framework model showing the links between the facilities management process and the building end user’s business process. The purpose of using the model is to support more detailed process modelling. The model has been developed using the IDEF0 modelling method. The ProFacil model describes business activities from the generalized point of view as management-, support-, and core processes and their relations. The model defines basic activities in the provision of a facility. Examples of these activities are “operate facilities”, “provide new facilities”, “provide re-build facilities”, “provide maintained facilities” and “perform dispose of facilities”. These are all generic activities providing a basis for a further specialisation of company specific FM activities and their tasks. A facilitator can establish a specialized process model using the ProFacil model and interacting with company experts to describe their company’s specific processes. These modelling seminars or interviews will be done in an informal way, supported by the high-level process model as a common reference.

Process Analytical Technology Approach on Fluid Bed Granulation and Drying : Identifying Critical Relationships and Constructing the Design Space

Fluid bed granulation is a key pharmaceutical process which improves many of the powder properties for tablet compression. Dry mixing, wetting and drying phases are included in the fluid bed granulation process. Granules of high quality can be obtained by understanding and controlling the critical process parameters by timely measurements. Physical process measurements and particle size data of a fluid bed granulator that are analysed in an integrated manner are included in process analytical technologies (PAT). Recent regulatory guidelines strongly encourage the pharmaceutical industry to apply scientific and risk management approaches to the development of a product and its manufacturing process. The aim of this study was to utilise PAT tools to increase the process understanding of fluid bed granulation and drying. Inlet air humidity levels and granulation liquid feed affect powder moisture during fluid bed granulation. Moisture influences on many process, granule and tablet qualities. The approach in this thesis was to identify sources of variation that are mainly related to moisture. The aim was to determine correlations and relationships, and utilise the PAT and design space concepts for the fluid bed granulation and drying. Monitoring the material behaviour in a fluidised bed has traditionally relied on the observational ability and experience of an operator. There has been a lack of good criteria for characterising material behaviour during spraying and drying phases, even though the entire performance of a process and end product quality are dependent on it. The granules were produced in an instrumented bench-scale Glatt WSG5 fluid bed granulator. The effect of inlet air humidity and granulation liquid feed on the temperature measurements at different locations of a fluid bed granulator system were determined. This revealed dynamic changes in the measurements and enabled finding the most optimal sites for process control. The moisture originating from the granulation liquid and inlet air affected the temperature of the mass and pressure difference over granules. Moreover, the effects of inlet air humidity and granulation liquid feed rate on granule size were evaluated and compensatory techniques used to optimize particle size. Various end-point indication techniques of drying were compared. The ∆T method, which is based on thermodynamic principles, eliminated the effects of humidity variations and resulted in the most precise estimation of the drying end-point. The influence of fluidisation behaviour on drying end-point detection was determined. The feasibility of the ∆T method and thus the similarities of end-point moisture contents were found to be dependent on the variation in fluidisation between manufacturing batches. A novel parameter that describes behaviour of material in a fluid bed was developed. Flow rate of the process air and turbine fan speed were used to calculate this parameter and it was compared to the fluidisation behaviour and the particle size results. The design space process trajectories for smooth fluidisation based on the fluidisation parameters were determined. With this design space it is possible to avoid excessive fluidisation and improper fluidisation and bed collapse. Furthermore, various process phenomena and failure modes were observed with the in-line particle size analyser. Both rapid increase and a decrease in granule size could be monitored in a timely manner. The fluidisation parameter and the pressure difference over filters were also discovered to express particle size when the granules had been formed. The various physical parameters evaluated in this thesis give valuable information of fluid bed process performance and increase the process understanding.

Natural regeneration and ecological succession in Pinus kesiya watershed plantations in northern Thailand : Implications on plantation management

Establishment of Pinus kesiya Roy. ex Gord. plantations in Thailand began in the 1960s by the Royal Forest Department. The aim was to reforest abandoned swidden areas and grasslands in order to reduce erosion and to produce timber and fuel wood. Today there are about 150, 000 ha of P. kesiya plantations in northern Thailand. Most of these plantations cannot be harvested due to a national logging ban. Previous studies have suggested that Pinus kesiya plantations posses a capability as a foster environment for native broadleaved tree species, but little is known about the extent of regeneration in these plantations. The general aim of the study was to clarify the extent of forest regeneration and interactions behind it in Pinus kesiya plantations of the Ping River basin, northern Thailand. Based on the results of this study and previous literature, forest management proposals were produced for the area studied. In four different pine plantation areas, a total of seven plantations were assessed using systematic data collection with clustered circular sample plots. Vegetation and environmental data were statistically analysed, so as to recognise the key factors affecting regeneration. Regeneration had occurred in all plantations studied. Regeneration of broadleaved trees was negatively affected by forest fire and canopy coverage. A high basal area of mature broadleaved trees affected the regeneration process positively. Forest fire disturbance had a strong effect also on plantation structure and species composition. Because of an unclear future forest management setting as regards forest laws in Thailand, a management system that enables various future utilisation possibilities and emphasises local participation is recommended for P. kesiya watershed platations of northern Thailand.

How do Researchers Find and Retrieve Scientific Publications – A Case study of the Impact of the Internet on the Construction IT and Construction Management Research Communities

The World Wide Web provides the opportunity for a radically changed and much more efficient communication process for scientific results. A survey in the closely related domains of construction information technology and construction management was conducted in February 2000, aimed at measuring to what extent these opportunities are already changing the scientific information exchange and how researchers feel about the changes. The paper presents the results based on 236 replies to an extensive Web based questionnaire. 65% of the respondents stated their primary research interest as IT in A/E/C and 20% as construction management and economics. The questions dealt with how researchers find, access and read different sources; how much and what publications they read; how often and to which conferences they travel; how much they publish, and what are the criteria for where they eventually decide to publish. Some of the questions confronted traditional and electronic publishing with one final section dedicated to opinions about electronic publishing. According to the survey researchers already download half of the material that they read digitally from the Web. The most popular method for retrieving an interesting publication is downloading it for free from the author’s or publisher’s website. Researchers are not particularly willing to pay for electronic scientific publications. There is much support for a scenario of electronic journals available totally freely on the Web, where the costs could be covered by for instance professional societies or the publishing university. The shift that the Web is causing seems to be towards the "just in time" reading of literature. Also, frequent users of the Web rely less on scientific publications and tend to read fewer articles. If available with little effort, papers published in traditional journals are preferred; if not, the papers should be on the Web. In these circumstances, the role of paper-based journals published by established publishers is shifting from the core "information exchange" to the building of authors' prestige. The respondents feel they should build up their reputations by publishing in journals and relevant conferences, but then make their work freely available on the Web.

The prevention of workplace bullying as a question of human resource management: measures adopted and underlying organizational factors

The aim of this study has been to analyze measures adopted to counteract workplace bullying from the perspective of human resource management. First, the kind of measures that are adopted to prevent bullying were examined. Second, factors affecting the extent of such measures were explored. The introduction of written anti-bullying policies and the provision of information were found to be the most common measures adopted. The policies strongly emphasized the role of supervisors and the immediate superior. Measures to counteract bullying were positively related to the adoption of ‘sophisticated’ human resource practices, previous negative publicity concerning bullying and the presence of a young human resource manager. The results, however, also indicated that imitation seemed to provide an important impetus behind anti-bullying efforts.

Essays on Risk Modeling. Applications to Portfolio and Risk Management (summary section only)

In this thesis we deal with the concept of risk. The objective is to bring together and conclude on some normative information regarding quantitative portfolio management and risk assessment. The first essay concentrates on return dependency. We propose an algorithm for classifying markets into rising and falling. Given the algorithm, we derive a statistic: the Trend Switch Probability, for detection of long-term return dependency in the first moment. The empirical results suggest that the Trend Switch Probability is robust over various volatility specifications. The serial dependency in bear and bull markets behaves however differently. It is strongly positive in rising market whereas in bear markets it is closer to a random walk. Realized volatility, a technique for estimating volatility from high frequency data, is investigated in essays two and three. In the second essay we find, when measuring realized variance on a set of German stocks, that the second moment dependency structure is highly unstable and changes randomly. Results also suggest that volatility is non-stationary from time to time. In the third essay we examine the impact from market microstructure on the error between estimated realized volatility and the volatility of the underlying process. With simulation-based techniques we show that autocorrelation in returns leads to biased variance estimates and that lower sampling frequency and non-constant volatility increases the error variation between the estimated variance and the variance of the underlying process. From these essays we can conclude that volatility is not easily estimated, even from high frequency data. It is neither very well behaved in terms of stability nor dependency over time. Based on these observations, we would recommend the use of simple, transparent methods that are likely to be more robust over differing volatility regimes than models with a complex parameter universe. In analyzing long-term return dependency in the first moment we find that the Trend Switch Probability is a robust estimator. This is an interesting area for further research, with important implications for active asset allocation.

Increasing Knowledge Focus - a Means for Entrepreneurs to Remain on a Growth Path: Essays on the Role and Nature of Knowledge Management in Finnish SMEs (summary section only)

This study explores the role and nature of knowledge management (KM) in small and medium-sized companies (SMEs). Even though the role of knowledge as a competitive advantage is commonly recognized in the SME sector, almost no attention has been paid to the managing and developing of knowledge in SMEs. This thesis consists of three different sub-studies that were reported in four individual essays. The results of the questionnaire study indicate that nearly all companies that responded to the questionnaire (N = 108) found intangible assets, i.e. knowledge resources to be their main source of competitive advantage. However, only less than a third of the companies actively deal with knowledge management. The results also indicate a significant correlation between activity in knowledge management and sustainable organic growth of the company. The interview study (N = 10) explored the context and motives of the SMEs for managing their intangible assets, and the concrete practices of knowledge management. It turned out that KM facilitated change management, clarification of the vision and new strategy formulation. All the interviewed companies were aiming at improved innovation process, new ways of doing business and attaining an increased “knowledge focus” in their business. Nearly all also aspired to grow significantly. Thus, KM provides a strategy for these SMEs to guarantee their survival and sustainability in the turbulent markets. The action research was a process to assess and develop intangible resources in three companies. The experienced benefits were the clarification of future focus and strategy, creation of a common language to discuss strategic issues within the company, as well as improved balance of different categories of intangible assets. After the process all the case companies had developed in the chosen key areas. Thus, by systematic knowledge management the implementation of new strategic orientation (knowledge focusing) was facilitated. The findings can be summarized in two main points. First, knowledge management seems to serve the purpose of change, renewal and new strategic orientation in the SMEs. It also seems to be closely related to organic growth and innovation. All of these factors can be considered dimensions of entrepreneurship. Second, the conscious development of intangible assets can increase the balance of different categories of intangible assets and the overall knowledge focusing of business. In the case companies, this in turn facilitated the path to the improved overall performance.

Offering Development in the Restaurant Sector. A Comparison Between Customer Perceptions and Management Beliefs

The present study concentrates on a small – but important – area of marketing: offering development within the service sector, more exactly the restaurant sector. The empirical part of the study has been carried out in the Helsinki metropolitan area using six successful restaurants. First, a conceptual offering development model is developed based on how the management perceives the offering development processes. Second, customer perceptions of offerings and management beliefs about how the customers perceive the offerings are analysed. Finally, an extended offering development model is created based on the management perceptions (the first model) as well as on observed gaps between customer perceptions of offerings and management beliefs about the customer perceptions. The study reveals that customer perceptions and management beliefs are rather similar but also that some differences exist. These differences are taken into account in the extended offering development model (the second model). The empirical data was collected through interviews and surveys. All together 393 customers and 14 managers participated in the study. The study suggests that successful offering development has to be closely connected with the general strategy of the company. A shared vision within the company in combination with a systematic strategic offering development process create a sound basis for the practical development work. The main contribution of the study is the extended offering development model forming a framework for further studies within the area.