Characterisation and processing of amorphous binary mixtures with low glass transition temperature

The number of drug substances in formulation development in the pharmaceutical industry is increasing. Some of these are amorphous drugs and have glass transition below ambient temperature, and thus they are usually difficult to formulate and handle. One reason for this is the reduced viscosity, related to the stickiness of the drug, that makes them complicated to handle in unit operations. Thus, the aim in this thesis was to develop a new processing method for a sticky amorphous model material. Furthermore, model materials were characterised before and after formulation, using several characterisation methods, to understand more precisely the prerequisites for physical stability of amorphous state against crystallisation. The model materials used were monoclinic paracetamol and citric acid anhydrate. Amorphous materials were prepared by melt quenching or by ethanol evaporation methods. The melt blends were found to have slightly higher viscosity than the ethanol evaporated materials. However, melt produced materials crystallised more easily upon consecutive shearing than ethanol evaporated materials. The only material that did not crystallise during shearing was a 50/50 (w/w, %) blend regardless of the preparation method and it was physically stable at least two years in dry conditions. Shearing at varying temperatures was established to measure the physical stability of amorphous materials in processing and storage conditions. The actual physical stability of the blends was better than the pure amorphous materials at ambient temperature. Molecular mobility was not related to the physical stability of the amorphous blends, observed as crystallisation. Molecular mobility of the 50/50 blend derived from a spectral linewidth as a function of temperature using solid state NMR correlated better with the molecular mobility derived from a rheometer than that of differential scanning calorimetry data. Based on the results obtained, the effect of molecular interactions, thermodynamic driving force and miscibility of the blends are discussed as the key factors to stabilise the blends. The stickiness was found to be affected glass transition and viscosity. Ultrasound extrusion and cutting were successfully tested to increase the processability of sticky material. Furthermore, it was found to be possible to process the physically stable 50/50 blend in a supercooled liquid state instead of a glassy state. The method was not found to accelerate the crystallisation. This may open up new possibilities to process amorphous materials that are otherwise impossible to manufacture into solid dosage forms.

Arkkitehti Aarne Ervin kaupunkisuunnittelu pääkaupunkiseudulla : Suomalaisen suurkaupungin kaavoitusta toisen maailmansodan jälkeen

The Modern City Planning of Architect Aarne Ervi in the Helsinki Metropolitan Area: The Planning of the Finnish Capital after the Second World War This study focuses on the city planning of architect Aarne Ervi (1910-1977) in the Helsinki metropolitan area, which includes the cities of Helsinki, Espoo, Kauniainen and Vantaa, from the 1940s to the end of the 1960s. Ervi succeeded in several major architectural competitions in Finland, acted as the main designer of the "New Town" of Tapiola and of the suburb of Vantaanpuisto in the metropolitan area, and worked as the first director of the city planning department of Helsinki from 1965-1969. This study belongs to the field of planning history in which the art historical study of architecture blends with the history of Finnish society. I examine architect Aarne Ervi and his city planning architecture through the concept of "modern". I link the theoretical literature of modernism in architecture and the modernization of society with historical documents and empirical archival research. I examine Ervi's professional career, the teamwork characteristic of his office, and the collegial community in which Ervi serves different vocational roles as an architect. The postwar development of planning legislation and of municipal and state planning organisations provides the necessary context for urban planning. I also discuss the municipal development of Espoo and Vantaa and the regionalization process that occured in Helsinki during the decades in question. The main results of this study relate to the collective and cooperative group nature of work in architectural design, to the introduction of an alternative approach to the question of modernism in Finnish architectural discourse, and to the post-war planning history of legislative and institutional organisations in Finland. Furthermore, the study includes new historical research about the city planning department of the city of Helsinki, the planning of Tapiola and Vantaanpuisto, and the operations of the main developers of these two suburban areas: the Asuntosäästäjät Society and the Asuntosäätiö Foundation.

Le naturalisme finlandais : Une conception entropique du quotidien

Le naturalisme finlandais. Une conception entropique du quotidien. Finnish Naturalism. An Entropic Conception of Everyday Life. Nineteenth century naturalism was a strikingly international literary movement. After emerging in France in the 1870s, it spread all over Europe including young, small nations with a relatively recent literary tradition, such as Finland. This thesis surveys the role and influence of French naturalism on the Finnish literature of the 1880s and 1890s. On the basis of a selection of works of six Finnish authors (Juhani Aho, Minna Canth, Kauppis-Heikki, Teuvo Pakkala, Ina Lange and Karl August Tavaststjerna), the study establishes a view of the main features of Finnish naturalism in comparison with that of French authors, such as Zola, Maupassant and Flaubert. The study s methodological framework is genre theory: even though naturalist writers insisted on a transparent description of reality, naturalist texts are firmly rooted in general generic categories with definable relations and constants on which European novels impose variations. By means of two key concepts, entropy and everyday life , this thesis establishes the parameters of the naturalist genre. At the heart of the naturalist novel is a movement in the direction of disintegration and confusion, from order to disorder, from illusion to disillusion. This entropic vision is merged into the representation of everyday life, focusing on socially mediocre characters and discovering their miseries in all their banality and daily grayness. By using Mikhail Bakhtin s idea of literary genres as a means of understanding experience, this thesis suggests that everyday life is an ideological core of naturalist literature that determines not only its thematic but also generic distinctions: with relation to other genres, such as to Balzac s realism, naturalism appears primarily to be a banalization of everyday life. In idyllic genres, everyday life can be represented by means of sublimation, but a naturalist novel establishes a distressing, negative everyday life and thus strives to take a critical view of the modern society. Beside the central themes, the study surveys the generic blends in naturalism. The thesis analyzes how the coalition of naturalism and the melodramatic mode in the work of Minna Canth serves naturalisms ambition to discover the unconscious instincts underlying daily realities, and how the symbolic mode in the work of Juhani Aho duplicates the semantic level of the apparently insignificant, everyday naturalist details. The study compares the naturalist novel to the ideological novel (roman à these) and surveys the central dilemma of naturalism, the confrontation between the optimistic belief in social reform and the pessimistic theory of determinism. The thesis proposes that the naturalist novel s contribution to social reform lies in its shock effect. By means of representing the unpleasant truth the entropy of everyday life it aims to scandalize the reader and make him aware of the harsh realities that might apply also to him.

Mannans as film formers and emulsion stabilizers

Mannans are abundant plant polysaccharides found in the endosperm of certain leguminous seeds (guar gum galactomannan, GG; locust bean gum galactomannan, LBG), in the tuber of the konjac plant (konjac glucomannan, KGM), and in softwoods (galactoglucomannan, GGM). This study focused on the effects of the chemical structure of mannans on their film-forming and emulsion-stabilizing properties. Special focus was on spruce GGM, which is an interesting new product from forest biorefineries. A plasticizer was needed for the formation of films from mannans other than KGM and the optimal proportion was 40% (w/w of polymers) glycerol or sorbitol. Galactomannans with lower galactose content (LBG, modified GG) produced films with higher elongation at break and tensile strength. The mechanical properties of GG-based films were improved by decreasing the degree of polymerization of the polysaccharide with moderate mannanase treatments. The improvement of mechanical properties of GGM-based films was sought by blending GGM with each of poly(vinyl alcohol) (PVOH), corn arabinoxylan (cAX), and KGM. Adding other polymers increased the elongation at break of GGM blend films. The tensile strength of films increased with increasing amounts of PVOH and KGM, but the effect of cAX was the opposite. Dynamic mechanical analysis showed two separate loss modulus peaks for blends of GGM and PVOH, but a single peak for all other films. Optical and scanning electron microscopy confirmed good miscibility of GGM with cAX and KGM. In contrast, films blended from GGM and PVOH showed phase separation. GGM and KGM were mixed with cellulose nanowhiskers (CNW) to form composite films. Addition of CNW to KGM-based films induced the formation of fiberlike structures with lengths of several millimeters. In GGM-based films, rodlike structures with lengths of tens of micrometers were formed. Interestingly, the notable differences in the film structure did not appear to be related to the mechanical and thermal properties of the films. Permeability properties of GGM-based films were compared to those of films from commercial mannans KGM, GG, and LBG. GGM-based films had the lowest water vapor permeability when compared to films from other mannans. The oxygen permeability of GGM films was of the same magnitude as that of commercial polyethylene / ethylene vinyl alcohol / polyethylene laminate film. The aroma permeability of GGM films was low. All films were transparent in the visible region, but GGM films blocked the light transmission in the ultraviolet region of the spectra. The stabilizing effect of GGM on a model beverage emulsion system was studied and compared to that of GG, LBG, KGM, and cAX. In addition, GG was enzymatically modified in order to examine the effect of the degree of polymerization and the degree of substitution of galactomannans on emulsion stability. Use of GGM increased the turbidity of emulsions both immediately after preparation and after storage of up to 14 days at room temperature. GGM emulsions had higher turbidity than the emulsions containing other mannans. Increasing the storage temperature to +45 ºC led to rapid emulsion breakdown, but a decrease in storage temperature increased emulsion stability after 14 days. A low degree of polymerization and a high degree of substitution of the modified galactomannans were associated with a decrease in emulsion turbidity.