Inflammation-induced atherogenesis, liver alterations, and cardiovascular outcome

Cardiovascular diseases, which presently are considered inflammatory diseases, affect millions of people worldwide. Chronic infections may contribute to the systemic inflammation suggested to increase the risk for cardiovascular diseases. Such chronic infections are periodontitis and Chlamydia pneumoniae infection. They are highly prevalent as approximately 10% of adult population and 30% of people over 50 years old are affected by severe periodontitis and 70-80% of elderly people are seropositive for C. pneumoniae. Our general aim was to investigate the role of infection and inflammation in atherosclerosis both in animal and human studies. We aimed to determine how the two pathogens alter the atherosclerosis-associated parameters, and how they affect the liver inflammation and lipid composition. Furthermore, we evaluated the association between matrix metalloproteinase-8 (MMP-8), a proteinase playing a major role in inflammation, and the future cardiovascular diseases (CVD) events in a population-based cohort. For the animal experiments, we used atherosclerosis-susceptible apolipoprotein E deficient (apoE-/-) mice. They were kept in germ free conditions and fed with a normal chow diet. The bacteria were administered either intravenously (A. actinomycetemcomitans) or intranasally (C. pneumoniae). Several factors were determined from serum as well as from aortic and hepatic tissues. We also determined how cholesterol efflux, a major event in the removal of excess cholesterol from the tissues, and endothelial function were affected by these pathogens. In the human study, serum MMP-8 and its tissue inhibitor (TIMP-1) concentrations were measured and their associations during the follow-up time of 10 years with CVD events were determined. An infection with A. actinomycetemcomitans increased concentrations of inflammatory mediators, MMP production, and cholesterol deposit in macrophages, decreased lipoprotein particle size, and induced liver inflammation. C. pneumoniae infection also elicited an inflammatory response and endothelial dysfunction, as well as induced liver inflammation, microvesicular appearance and altered fatty acid profile. In the population-based cohort, men with increased serum MMP-8 concentration together with subclinical atherosclerosis (carotid artery intima media thickness > 1mm) had a three-fold increased risk for CVD death during the follow-up. The results show that infections with A. actinomycetemcomitans and C. pneumoniae induce proatherogenic changes, as well as affect the liver. These data therefore support the concept that common infections have systemic effects and could be considered as cardiovascular risk factors. Furthermore, our data indicate that, as an independent predictor of fatal CVD event, serum MMP-8 could have a clinical significance in diagnosing cardiovascular diseases.

Molecular Details of Serum Resistance of Yersinia enterocolitica

In complement activation, Factor H (FH) and C4b-binding protein (C4bp) are the key regulators that prevent the complement cascade from attacking host tissues. Some bacteria may bind and deposit these regulators on their own surfaces and thus provide themselves with an efficient means to avoid complement activation. In consequence, bacteria resist complement-mediated lysis and opsonin-dependent phagocytosis. This study has demonstrated that Y. enterocolitica, similar to many other pathogens, recruits both FH and C4bp to its surface to ensure protection against the complement-mediated killing. YadA and Ail, the most crucial serum resistance factors of Y.enterocolitica, mediate the binding of FH and C4bp. FH - YadA interaction involves multiple higher structural motifs on the YadA stalk and the short consensus repeats (SCRs) of the entire polypeptide chain of FH. The Ail binding site on FH has been located to SCRs 6 and 7. The binding site for FH on Ail, however, remains undetermined. Both YadA- and Ail-bound regulators display full cofactor activity for FI-mediated cleavage of C3b/C4b. FH/C4bp-binding characteristics do, however, differ between YadA and Ail. In addition, Ail captures the regulators only in the absence of blocking lipopolysaccharide O-antigen and outer core, whereas YadA binds FH/C4bp independent of the presence of other surface factors Independent of mode of binding, however, YadA and Ail provide Y. enterocolitica a means to avoid complement-mediated lysis, enhancing chances for the bacteria to survive in the host during various phases of infection.

Microbial life and deposits in paper machine circuits

Väitöskirjani käsittele mikrobien ja erilaisten kemikaalien rooleja saostumien ja biofilmien muodostumisessa paperi- ja kartonkikoneilla. "Saostuma" tässä työssä tarkoittaa kiinteän aineen kertymää konepinnoille tai rajapinnoille konekierroissa, jotka on tarkoitettu massasulppujen, lietteiden, vesien tai ilman kuljetukseen. Saostumasta tulee "biofilmi" silloin kun sen oleellinen rakennekomponentti on mikrobisolut tai niiden tuotteet. Väitöstyöni työhypoteesina oli, että i. tietämys saostumien koostumuksesta, sekä ii. niiden rakenteesta, biologisista, fysikaalis-kemiallisista ja teknisistä ominaisuuksista ohjaavat tutkijaa löytämään ympäristöä säästäviä keinoja estää epätoivottujen saostumien muodostus tai purkaa jo muodostuneita saostumia. Selvittääkseni saostumien koostumista ja rakennetta käytin monia erilaisia analytiikan työkaluja, kuten elektronimikroskopiaa, konfokaali-laser mikroskopiaa (CLSM), energiadispersiivistä röntgenanalyysiä (EDX), pyrolyysi kaasukromatografiaa yhdistettynä massaspektrometriaan (Py-GCMS), joninvaihtokromatografiaa, kaasukromatografiaa ja mikrobiologisia analyysejä. Osallistuin aktiivisesti innovatiivisen, valon takaisinsirontaan perustuvan sensorin kehittämistyöhön, käytettäväksi biofilmin kasvun mittaukseen suoraan koneen vesikierroista ja säiliöistä. Työni osoitti, että monet paperinvalmistuksessa käytetyistä kemikaaleista reagoivat keskenään tuottaen orgaanisia tahmakerroksia konekiertojen teräspinnoille. Löysin myös kerrostumia, jotka valomikroskooppisessa tarkastelussa oli tulkittu mikrobeiksi, mutta jotka elektronimikroskopia paljasti alunasta syntyneiksi, alumiinihydroksidiksi joka saostui pH:ssa 6,8 kiertokuitua käyttävän koneen viiravesistä. Monet paperintekijät käyttävät vieläkin alunaa kiinnitysaineena vaikka prosessiolot ovat muuttuneet happamista neutraaleiksi. Sitä pidetään paperitekijän "aspiriinina", mutta väitöstutkimukseni osoitti sen riskit. Löysin myös orgaanisia saostumia, joiden alkuperä oli aineiden, kuten pihkan, saippuoituminen (kalsium saippuat) niin että muodostui tahmankasvua ylläpitävä alusta monilla paperi- ja kartonkikoneilla. Näin solumuodoiltaan Deinococcus geothermalista muistuttavia bakteereita kasvamassa lujasti teräskoepalojen pintaan kiinnittyneinä pesäkkeinä, kun koepaloja upotettiin paperikoneiden vesikiertoihin. Nämä deinokokkimaiset pesäkkeet voivat toimia jalustana, tarttumisalustana muiden mikrobien massoille, joka selittäisi miksi saostumat yleisesti sisältävät deinokokkeja pienenä, muttei koskaan pääasiallisena rakenneosana. Kun paperikoneiden käyttämien vesien (raakavedet, lämminvesi, biologisesti puhdistettu jätevesi) laatua tutkitaan, mittausmenetelmällä on suuri merkitys. Koepalan upotusmenetelmällä todettu biofilmikasvu ja viljelmenetelmällä mitattu bakteerisaastuneisuus korreloivat toisiinsa huonosti etenkin silloin kun likaantumisessa oli mukana rihmamaiseti kasvavia bakteereja. Huoli ympäristöstä on pakottanut paperi- ja kartonkikoneiden vesikiertojen sulkemiseen. Vesien kierrätys ja prosessivesien uudelleenkäyttö nostavat prosessilämpötilaa ja lisäävät koneella kiertävien kolloidisten ja liuenneiden aineiden määriä. Tutkin kiertovesien pitoisuuksia kolmessa eriasteisesti suljetussa tehtaassa, joiden päästöt olivat 0 m3, 0,5 m3 ja 4 m3 jätevettä tuotetonnia kohden, perustuen puhdistetun jäteveden uudelleen käyttöön. Nollapäästöisellä tehtaalla kiertovesiin kertyi paljon orgaanisesti sidottua hiiltä (> 10 g L-1), etenkin haihtuvina happoina (maito-, etikka-, propioni- ja voi-). Myös sulfaatteja, klorideja, natriumia ja kalsiumia kertyi paljon, > 1 g L-1 kutakin. Pääosa (>40%) kaikista bakteereista oli 16S rRNA geenisekvenssianalyysien tulosten perusteella sukua, joskin etäistä (< 96%) ainoastaan Enterococcus cecorum bakteerille. 4 m3 päästävältä tehtaalta löytyi lisäksi Bacillus thermoamylovorans ja Bacillus coagulans. Tehtaiden saostumat sisälsivät arkkeja suurina pitoisuuksina, ≥ 108 g-1, mutta tunnistukseen riittävää sekvenssisamanlaisuutta löytyi vain yhteen arkkisukuun, Methanothrix. Tutkimustulokset osoittivat että tehtaan vesikiertojen sulkeminen vähensi rajusti mikrobiston monimuotoisuutta, muttei estänyt liuenneen aineen ja kiintoaineen mineralisoitumista.

Radical Enhanced Atomic Layer Deposition of Metals and Oxides

Atomic Layer Deposition (ALD) is a chemical, gas-phase thin film deposition method. It is known for its ability for accurate and precise thickness control, and uniform and conformal film growth. One area where ALD has not yet excelled is film deposition at low temperatures. Also deposition of metals, besides the noble metals, has proven to be quite challenging. To alleviate these limitations, more aggressive reactants are required. One such group of reactants are radicals, which may be formed by dissociating gases. Dissociation is most conveniently done with a plasma source. For example, dissociating molecular oxygen or hydrogen, oxygen or hydrogen radicals are generated. The use of radicals in ALD may surmount some of the above limitations: oxide film deposition at low temperatures may become feasible if oxygen radicals are used as they are highly reactive. Also, as hydrogen radicals are very effective reducing agents, they may be used to deposit metals. In this work, a plasma source was incorporated in an existing ALD reactor for radical generation, and the reactor was used to study five different Radical Enhanced ALD processes. The modifications to the existing reactor and the different possibilities during the modification process are discussed. The studied materials include two metals, copper and silver, and three oxides, aluminium oxide, titanium dioxide and tantalum oxide. The materials were characterized and their properties were compared to other variations of the same process, utilizing the same metal precursor, to understand what kind of effect the non-metal precursor has on the film properties and growth characteristics. Both metals were deposited successfully, and silver for the first time by ALD. The films had low resistivity and grew conformally in the ALD mode, demonstrating that the REALD of metals is true ALD. The oxide films had exceptionally high growth rates, and aluminium oxide grew at room temperature with low cycle times and resulted in good quality films. Both aluminium oxide and titanium dioxide were deposited on natural fibres without damaging the fibre. Tantalum oxide was also deposited successfully, with good electrical properties, but at slightly higher temperature than the other two oxides, due to the evaporation temperature required by the metal precursor. Overall, the ability of REALD to deposit metallic and oxide films with high quality at low temperatures was demonstrated.

Copper Diffusion Barrier Deposition on Integrated Circuit Devices by Atomic Layer Deposition Technique

Transfer from aluminum to copper metallization and decreasing feature size of integrated circuit devices generated a need for new diffusion barrier process. Copper metallization comprised entirely new process flow with new materials such as low-k insulators and etch stoppers, which made the diffusion barrier integration demanding. Atomic Layer Deposition technique was seen as one of the most promising techniques to deposit copper diffusion barrier for future devices. Atomic Layer Deposition technique was utilized to deposit titanium nitride, tungsten nitride, and tungsten nitride carbide diffusion barriers. Titanium nitride was deposited with a conventional process, and also with new in situ reduction process where titanium metal was used as a reducing agent. Tungsten nitride was deposited with a well-known process from tungsten hexafluoride and ammonia, but tungsten nitride carbide as a new material required a new process chemistry. In addition to material properties, the process integration for the copper metallization was studied making compatibility experiments on different surface materials. Based on these studies, titanium nitride and tungsten nitride processes were found to be incompatible with copper metal. However, tungsten nitride carbide film was compatible with copper and exhibited the most promising properties to be integrated for the copper metallization scheme. The process scale-up on 300 mm wafer comprised extensive film uniformity studies, which improved understanding of non-uniformity sources of the ALD growth and the process-specific requirements for the ALD reactor design. Based on these studies, it was discovered that the TiN process from titanium tetrachloride and ammonia required the reactor design of perpendicular flow for successful scale-up. The copper metallization scheme also includes process steps of the copper oxide reduction prior to the barrier deposition and the copper seed deposition prior to the copper metal deposition. Easy and simple copper oxide reduction process was developed, where the substrate was exposed gaseous reducing agent under vacuum and at elevated temperature. Because the reduction was observed efficient enough to reduce thick copper oxide film, the process was considered also as an alternative method to make the copper seed film via copper oxide reduction.

Essays on Banking Crises

This thesis aims at finding the role of deposit insurance scheme and central bank (CB) in keeping the banking system safe. The thesis also studies the factors associated with long-lasting banking crises. The first essay analyzes the effect of using explicit deposit insurance scheme (EDIS), instead of using implicit deposit insurance scheme (IDIS), on banking crises. The panel data for the period of 1980-2003 includes all countries for which the data on EDIS or IDIS exist. 70% of the countries in the sample are less developed countries (LDCs). About 55% of the countries adopting EDIS also come from LDCs. The major finding is that the using of EDIS increases the crisis probability at a strong significance level. This probability is greater if the EDIS is inefficiently designed allowing higher scope of moral hazard problem. Specifically, the probability is greater if the EDIS provides higher coverage to deposits and if it is less powerful from the legal point of view. This study also finds that the less developed a country is to handle EDIS, the higher the chance of banking crisis. Once the underdevelopment of an economy handling the EDIS is controlled, the EDIS separately is no longer a significant factor of banking crises. The second essay aims at determining whether a country s powerful CB can lessen the instability of the banking sector by minimizing the likelihood of a banking crisis. The data used include indicators of the CB s autonomy for a set of countries over the period of 1980-89. The study finds that in aggregate a more powerful CB lessens the probability of banking crisis. When the CB s authority is disentangled with respect to its responsibilities, the study finds that the longer tenure of CB s chief executive officer and the greater power of CB in assigning interest rate on government loans are necessary for reducing the probability of banking crisis. The study also finds that the probability of crisis reduces more if an autonomous CB can perform its duties in a country with stronger law and order tradition. The costs of long-lasting banking crises are high because both the depositors and the investors lose confidence in the banking system. For a rapid recovery of a crisis, the government very often undertakes one or more crisis resolution policy (CRP) measures. The third essay examines the CRP and other explanatory variables correlated with the durations of banking crises. The major finding is that the CRP measure allowing the regulation forbearance to keep the insolvent banks operative and the public debt relief program are respectively strongly and weakly significant to increase the durations of crises. Some other explanatory variables, which were found by previous studies to be related with the probability of crises to occur, are also correlated with the durations of crises.

Healthcare-Associated Infections in Pediatrics

Healthcare-associated infections (HAIs) are known to increase the risk for patient morbidity and mortality in different healthcare settings and thereby to cause additional costs. HAIs typically affect patients with severe underlying conditions. HAIs are prevalent also among pediatric patients, but the distribution of the types of infection and the causative agents differ from those detected in adults. The aim of this study was to obtain information on pediatric HAIs in Finland through an assessment of the surveillance of bloodstream infections (BSIs), through two outbreak investigations in a neonatal intensive care unit (NICU), and through a study of postoperative HAIs after open-heart surgery. The studies were carried out at the Hospital for Children and Adolescents of Helsinki University Central Hospital. Epidemiological features of pediatric BSIs were assessed. For the outbreak investigations, case definitions were set and data collected from microbiological and clinical records. The antimicrobial susceptibilities of the Serratia marcescens and the Candida parapsilosis isolates were determined and they were genotyped. Patient charts were reviewed for the case-control and cohort studies during the outbreak investigations, as well as for the patients who acquired surgical site infections (SSIs) after having undergone open-heart surgery. Also a prospective postdischarge study was conducted to detect postoperative HAIs in these patients. During 1999-2006, the overall annual BSI rate was 1.6/1,000 patient days (range by year, 1.2–2.1). High rates (average, 4.9 and 3.2 BSIs/1,000 patient days) were detected in hematology and neonatology units. Coagulase-negative staphylococci were the most common pathogens both hospital-wide and in each patient group. The overall mortality was 5%. The genotyping of the 15 S. marcescens isolates revealed three independent clusters. All of the 26 C. parapsilosis isolates studied proved to be indistinguishable. The NICU was overcrowded during the S. marcescens clusters. A negative correlation between C. parapsilosis BSIs and fluconazole use in the NICU was detected, and the isolates derived from a single initially susceptible strain became less susceptible to fluconazole over time. Eighty postoperative HAIs, including all severe infections, were detected during hospitalization after open-heart surgery; 34% of those HAIs were SSIs and 25% were BSIs. The postdischarge study found 65 infections that were likely to be associated with hospitalization. The majority (89%) of them were viral respiratory or gastrointestinal infections, and these often led to rehospitalizations. The annual hospital-wide BSI rates were stable, and the significant variation detected in some units could not be seen in overall rates. Further studies with data adequately adjusted for risk factors are needed to assess BSI rates in the patient groups with the highest rates (hematology, neonatology). The outbreak investigations showed that horizontal transmission was common in the NICU. Overcrowding and lapses in hand hygiene probably contributed to the spreading of the pathogens. Following long-term use of fluconazole in the NICU, resistance to fluconazole developed in C. parapsilosis. Almost one-fourth of the patients who underwent open-heart surgery acquired at least one HAI. All severe HAIs were detected during hospitalization. The postdischarge study found numerous viral infections, which often caused rehospitalization.

Corporate Governance in European Banks: Essays on Bank Ownership

Banks are important as they have a central role in the financial system, where funds are channelled either through financial intermediaries, such as banks, or through financial markets, hence promoting growth in any economy. Recently, we have been reminded of the drawbacks of the central role of banks. The current financial crisis, which started out as a sub-prime mortgage crisis in the US, has become a global financial crisis with substantial impact on the real economy in many countries. Some of the roots to the current financial crisis can be sought in the changing role of banks and in bank corporate governance. Moreover, the substantial revitalising measures taken have been justified by the central role of banks. Not only are banks important, they are also very special. The fact that banks are regulated in conjunction with greater opacity, make bank corporate governance different from corporate governance in non-bank companies. Surprisingly little is, however, known about bank corporate governance, in particularly, in a European setting. Hence, the objective of this doctoral thesis is to provide new insights in this research area by examining banks from 37 different European countries. Each of the three essays included in the doctoral thesis examines a particular aspect of bank corporate governance. In the first essay the interaction between the regulatory environment a bank operates in and its ownership structure is explored. Indicators of the severity of the moral hazard problem induced by the deposit insurance system and implicit too-big-to-fail government guarantee, particular features of deposit insurance systems as well as legal protection of shareholders, legal origin of a country and level of integration to the European community are used in the analysis. The empirical findings confirm previous findings on the link between legal protection of shareholders and ownership structure. Moreover, they show that differences in deposit insurance system features can explain some of the differences in ownership structure across European banks. In the second essay the impact of management and board ownership on the profitability of banks with different strategy is examined. The empirical findings suggest that the efficiency of these two particular corporate governance mechanisms varies with the characteristics of the agency problem faced by the bank. More specifically, management ownership is important in opaque non-traditional banks, whereas board ownership is important in traditional banks, where deposit insurance reduces the monitoring incentives of outsiders. The higher profitability does, however, go together with higher risk. In the third essay the profitability and risk of commercial, savings and cooperative banks are compared. The empirical findings suggest that distinct operational and ownership characteristics rather than only the mere fact that a bank is a commercial, savings or cooperative bank explain the profitability and risk differences. The main insight from the three essays is that a number of different aspects should be addressed simultaneously in order to give the complexity of bank corporate governance justice.

Bank Run Risk and Optimal Reserves

We characterize the optimal reserves, and the generated probability of a bank run, as a function of the penalty imposed by the central bank, the probability of depositors’ liquidity needs, and the return on outside investment opportunities.

Selective-Area Atomic Layer Deposition

Atomic layer deposition (ALD) is a method to deposit thin films from gaseous precursors to the substrate layer-by-layer so that the film thickness can be tailored with atomic layer accuracy. Film tailoring is even further emphasized with selective-area ALD which enables the film growth to be controlled also on the substrate surface. Selective-area ALD allows the decrease of a process steps in preparing thin film devices. This can be of a great technological importance when the ALD films become into wider use in different applications. Selective-area ALD can be achieved by passivation or activation of a surface. In this work ALD growth was prevented by octadecyltrimethoxysilane, octadecyltrichlorosilane and 1-dodecanethiol SAMs, and by PMMA (polymethyl methacrylate) and PVP (poly(vinyl pyrrolidone) polymer films. SAMs were prepared from vapor phase and by microcontact printing, and polymer films were spin coated. Microcontact printing created patterned SAMs at once. The SAMs prepared from vapor phase and the polymer mask layers were patterned by UV lithography or lift-off process so that after preparation of a continuous mask layer selected areas of them were removed. On these areas the ALD film was deposited selectively. SAMs and polymer films prevented the growth in several ALD processes such as iridium, ruthenium, platinum, TiO2 and polyimide so that the ALD films did grow only on areas without SAM or polymer mask layer. PMMA and PVP films also protected the surface against Al2O3 and ZrO2 growth. Activation of the surface for ALD of ruthenium was achieved by preparing a RuOX layer by microcontact printing. At low temperatures the RuCp2-O2 process nucleated only on this oxidative activation layer but not on bare silicon.

FIN-CLARIN: A Framework for Depositing and Disseminating Language Resources for R&D

Researchers and developers in academia and industry would benefit from a facility that enables them to easily locate, licence and use the kind of empirical data they need for testing and refining their hypotheses and to deposit and disseminate their data e.g. to support replication and validation of reported scientific experiments. To answer these needs initially in Finland, there is an ongoing project at University of Helsinki and its collaborators to create a user-friendly web service for researchers and developers in Finland and other countries. In our talk, we describe ongoing work to create a palette of extensive but easily available Finnish language resources and technologies for the research community, including lexical resources, wordnets, morphologically tagged corpora, dependency syntactic treebanks and parsebanks, open-source finite state toolkits and libraries and language models to support text analysis and processing at customer site. Also first publicly available results are presented.