How to design educational settings to promote collaborative inquiry: Pedagogical infrastructures for technology-enhanced progressive inquiry

Strategies of scientific, question-driven inquiry are stated to be important cultural practices that should be educated in schools and universities. The present study focuses on investigating multiple efforts to implement a model of Progressive Inquiry and related Web-based tools in primary, secondary and university level education, to develop guidelines for educators in promoting students collaborative inquiry practices with technology. The research consists of four studies. In Study I, the aims were to investigate how a human tutor contributed to the university students collaborative inquiry process through virtual forums, and how the influence of the tutoring activities is demonstrated in the students inquiry discourse. Study II examined an effort to implement technology-enhanced progressive inquiry as a distance working project in a middle school context. Study III examined multiple teachers' methods of organizing progressive inquiry projects in primary and secondary classrooms through a generic analysis framework. In Study IV, a design-based research effort consisting of four consecutive university courses, applying progressive inquiry pedagogy, was retrospectively re-analyzed in order to develop the generic design framework. The results indicate that appropriate teacher support for students collaborative inquiry efforts appears to include interplay between spontaneity and structure. Careful consideration should be given to content mastery, critical working strategies or essential knowledge practices that the inquiry approach is intended to promote. In particular, those elements in students activities should be structured and directed, which are central to the aim of Progressive Inquiry, but which the students do not recognize or demonstrate spontaneously, and which are usually not taken into account in existing pedagogical methods or educational conventions. Such elements are, e.g., productive co-construction activities; sustained engagement in improving produced ideas and explanations; critical reflection of the adopted inquiry practices, and sophisticated use of modern technology for knowledge work. Concerning the scaling-up of inquiry pedagogy, it was concluded that one individual teacher can also apply the principles of Progressive Inquiry in his or her own teaching in many innovative ways, even under various institutional constraints. The developed Pedagogical Infrastructure Framework enabled recognizing and examining some central features and their interplay in the designs of examined inquiry units. The framework may help to recognize and critically evaluate the invisible learning-cultural conventions in various educational settings and can mediate discussions about how to overcome or change them.

Melun sieto kaupunkielämän välttämättömyytenä : Melu ympäristöongelmana ja sen synnyttämien reaktioiden kulttuurinen käsittely Helsingissä

Tolerance of Noise as a Necessity of Urban Life. Noise pollution as an environmental problem and its cultural perceptions in the city of Helsinki This study looks at the noise pollution problem and the change in the urban soundscape in the city of Helsinki during the period from the 1950s to the present day. The study investigates the formation of noise problems, the politicization of the noise pollution problem, noise-related civic activism, the development of environmental policies on noise, and the expectations that urban dwellers have had concerning their everyday soundscape. Both so-called street noise and the noise caused by, e.g., neighbors are taken into account. The study investigates whether our society contains or has for some time contained cultural and other elements that place noise pollution as an essential or normal state of affairs as part of urban life. It is also discussed whether we are moving towards an artificial soundscape, meaning that the auditory reality, the soundscape, is more and more under human control. The concept of an artificial soundscape was used to crystallize the significance of human actions and the role of modern technology in shaping soundscapes and also to link the changes in the modern soundscape to the economic, political, and social changes connected to the modernization process. It was argued that the critical period defining noise pollution as an environmental problem were the years from the end of the 1960s to the early 1970s. It seems that the massive increase of noise pollution caused by road traffic and the introduction of the utopian traffic plans was the key point that launched the moral protest against the increase of noise pollution, and in general, against the basic structures and mindsets of society, including attitudes towards nature. The study argues that after noise pollution was politicized and institutionalized, the urban soundscape gradually became the target of systematic interventions. However, for various reasons, such as the inconsistency in decision making, our increased capacity to shape the soundscape has not resulted in a healthy or pleasant urban soundscape. In fact the number of people exposed to noise pollution is increasing. It is argued that our society contains cultural and other elements that urge us to see noise as a normal part of urban life. It is also argued that the possibility of experiencing natural, silent soundscapes seems to be the yardstick against which citizens of Helsinki have measured how successful we are in designing the (artificial) soundscape and if the actions of noise control have been effective. This work discusses whose interests it serves when we are asked to accept noise pollution as a normal state of affairs. It is also suggested that the quality of the artificial soundscape ought to be radically politicized, which might give all citizens a better and more equal chance to express their needs and wishes concerning the urban soudscape, and also to decide how it ought to be designed.

A capability-based view of organisational renewal : Combining opportunity- and advantage-seeking growth in large, established European and North American wood-industry companies

The purpose of this study was to extend understanding of how large firms pursuing sustained and profitable growth manage organisational renewal. A multiple-case study was conducted in 27 North American and European wood-industry companies, of which 11 were chosen for closer study. The study combined the organisational-capabilities approach to strategic management with corporate-entrepreneurship thinking. It charted the further development of an identification and classification system for capabilities comprising three dimensions: (i) the dynamism between firm-specific and industry-significant capabilities, (ii) hierarchies of capabilities and capability portfolios, and (iii) their internal structure. Capability building was analysed in the context of the organisational design, the technological systems and the type of resource-bundling process (creating new vs. entrenching existing capabilities). The thesis describes the current capability portfolios and the organisational changes in the case companies. It also clarifies the mechanisms through which companies can influence the balance between knowledge search and the efficiency of knowledge transfer and integration in their daily business activities, and consequently the diversity of their capability portfolio and the breadth and novelty of their product/service range. The largest wood-industry companies of today must develop a seemingly dual strategic focus: they have to combine leading-edge, innovative solutions with cost-efficient, large-scale production. The use of modern technology in production was no longer a primary source of competitiveness in the case companies, but rather belonged to the portfolio of basic capabilities. Knowledge and information management had become an industry imperative, on a par with cost effectiveness. Yet, during the period of this research, the case companies were better in supporting growth in volume of the existing activity than growth through new economic activities. Customer-driven, incremental innovation was preferred over firm-driven innovation through experimentation. The three main constraints on organisational renewal were the lack of slack resources, the aim for lean, centralised designs, and the inward-bound communication climate.

Ethics in a Technological World : Framing the Questions and Three Approaches

This study addresses the following question: How to think about ethics in a technological world? The question is treated first thematically by framing central issues in the relationship between ethics and technology. This relationship has three distinct facets: i) technological advance poses new challenges for ethics, ii) traditional ethics may become poorly applicable in a technologically transformed world, and iii) the progress in science and technology has altered the concept of rationality in ways that undermine ethical thinking itself. The thematic treatment is followed by the description and analysis of three approaches to the questions framed. First, Hans Jonas s thinking on the ontology of life and the imperative of responsibility is studied. In Jonas s analysis modern culture is found to be nihilistic because it is unable to understand organic life, to find meaning in reality, and to justify morals. At the root of nihilism Jonas finds dualism, the traditional Western way of seeing consciousness as radically separate from the material world. Jonas attempts to create a metaphysical grounding for an ethic that would take the technologically increased human powers into account and make the responsibility for future generations meaningful and justified. The second approach is Albert Borgmann s philosophy of technology that mainly assesses the ways in which technological development has affected everyday life. Borgmann admits that modern technology has liberated humans from toil, disease, danger, and sickness. Furthermore, liberal democracy, possibilities for self-realization, and many of the freedoms we now enjoy would not be possible on a large scale without technology. Borgmann, however, argues that modern technology in itself does not provide a whole and meaningful life. In fact, technological conditions are often detrimental to the good life. Integrity in life, according to him, is to be sought among things and practices that evade technoscientific objectification and commodification. Larry Hickman s Deweyan philosophy of technology is the third approach under scrutiny. Central in Hickman s thinking is a broad definition of technology that is nearly equal to Deweyan inquiry. Inquiry refers to the reflective and experiential way humans adapt to their environment by modifying their habits and beliefs. In Hickman s work, technology consists of all kinds of activities that through experimentation and/or reflection aim at improving human techniques and habits. Thus, in addition to research and development, many arts and political reforms are technological for Hickman. He argues for recasting such distinctions as fact/value, poiesis/praxis/theoria, and individual/society. Finally, Hickman does not admit a categorical difference between ethics and technology: moral values and norms need to be submitted to experiential inquiry as well as all the other notions. This study mainly argues for an interdisciplinary approach to the ethics of technology. This approach should make use of the potentialities of the research traditions in applied ethics, the philosophy of technology, and the social studies on science and technology and attempt to overcome their limitations. This study also advocates an endorsement of mid-level ethics that concentrate on the practices, institutions, and policies of temporal human life. Mid-level describes the realm between the instantaneous and individualistic micro-level and the universal and global macro level.

Process Analytical Technology Approach on Fluid Bed Granulation and Drying : Identifying Critical Relationships and Constructing the Design Space

Fluid bed granulation is a key pharmaceutical process which improves many of the powder properties for tablet compression. Dry mixing, wetting and drying phases are included in the fluid bed granulation process. Granules of high quality can be obtained by understanding and controlling the critical process parameters by timely measurements. Physical process measurements and particle size data of a fluid bed granulator that are analysed in an integrated manner are included in process analytical technologies (PAT). Recent regulatory guidelines strongly encourage the pharmaceutical industry to apply scientific and risk management approaches to the development of a product and its manufacturing process. The aim of this study was to utilise PAT tools to increase the process understanding of fluid bed granulation and drying. Inlet air humidity levels and granulation liquid feed affect powder moisture during fluid bed granulation. Moisture influences on many process, granule and tablet qualities. The approach in this thesis was to identify sources of variation that are mainly related to moisture. The aim was to determine correlations and relationships, and utilise the PAT and design space concepts for the fluid bed granulation and drying. Monitoring the material behaviour in a fluidised bed has traditionally relied on the observational ability and experience of an operator. There has been a lack of good criteria for characterising material behaviour during spraying and drying phases, even though the entire performance of a process and end product quality are dependent on it. The granules were produced in an instrumented bench-scale Glatt WSG5 fluid bed granulator. The effect of inlet air humidity and granulation liquid feed on the temperature measurements at different locations of a fluid bed granulator system were determined. This revealed dynamic changes in the measurements and enabled finding the most optimal sites for process control. The moisture originating from the granulation liquid and inlet air affected the temperature of the mass and pressure difference over granules. Moreover, the effects of inlet air humidity and granulation liquid feed rate on granule size were evaluated and compensatory techniques used to optimize particle size. Various end-point indication techniques of drying were compared. The ∆T method, which is based on thermodynamic principles, eliminated the effects of humidity variations and resulted in the most precise estimation of the drying end-point. The influence of fluidisation behaviour on drying end-point detection was determined. The feasibility of the ∆T method and thus the similarities of end-point moisture contents were found to be dependent on the variation in fluidisation between manufacturing batches. A novel parameter that describes behaviour of material in a fluid bed was developed. Flow rate of the process air and turbine fan speed were used to calculate this parameter and it was compared to the fluidisation behaviour and the particle size results. The design space process trajectories for smooth fluidisation based on the fluidisation parameters were determined. With this design space it is possible to avoid excessive fluidisation and improper fluidisation and bed collapse. Furthermore, various process phenomena and failure modes were observed with the in-line particle size analyser. Both rapid increase and a decrease in granule size could be monitored in a timely manner. The fluidisation parameter and the pressure difference over filters were also discovered to express particle size when the granules had been formed. The various physical parameters evaluated in this thesis give valuable information of fluid bed process performance and increase the process understanding.

External signal-activated liposomal drug delivery systems

Modern drug discovery gives rise to a great number of potential new therapeutic agents, but in some cases the efficient treatment of patient may not be achieved because the delivery of active compounds to the target site is insufficient. Thus, drug delivery is one of the major challenges in current pharmaceutical research. Numerous nanoparticle-based drug carriers, e.g. liposomes, have been developed for enhanced drug delivery and targeting. Drug targeting may enhance the efficiency of the treatment and, importantly, reduce unwanted side effects by decreasing drug distribution to non-target tissues. Liposomes are biocompatible lipid-based carriers that have been studied for drug delivery during the last 40 years. They can be functionalized with targeting ligands and sensing materials for triggered activation. In this study, various external signal-assisted liposomal delivery systems were developed. Signals can be used to modulate drug permeation or release from the liposome formulation, and they provide accurate control of time, place and rate of activation. The study involved three types of signals that were used to trigger drug permeation and release: electricity, heat and light. Electrical stimulus was utilized to enhance the permeation of liposomal DNA across the skin. Liposome/DNA complex-mediated transfections were performed in tight rat epidermal cell model. Various transfection media and current intensities were tested, and transfection efficiency was evaluated non-invasively by monitoring the concentration of secreted reporter protein in cell culture medium. Liposome/DNA complexes produced gene expression, but electrical stimulus did not enhance the transfection efficiency significantly. Heat-sensitive liposomal drug delivery system was developed by coating liposomes with biodegradable and thermosensitive poly(N-(2-hydroxypropyl) methacrylamide-mono/dilactate polymer. Temperature-triggered liposome aggregation and contents release from liposomes were evaluated. The cloud point temperature (CP) of the polymer was set to 42 °C. Polymer-coated liposome aggregation and contents release were observed above CP of the polymer, while non-coated liposomes remained intact. Polymer precipitates above its CP and interacts with liposomal bilayers. It is likely that this induces permeabilization of the liposomal membrane and contents release. Light-sensitivity was introduced to liposomes by incorporation of small (< 5 nm) gold nanoparticles. Hydrophobic and hydrophilic gold nanoparticles were embedded in thermosensitive liposomes, and contents release was investigated upon UV light exposure. UV light-induced lipid phase transitions were examined with small angle X-ray scattering, and light-triggered contents release was shown also in human retinal pigment epithelial cell line. Gold nanoparticles absorb light energy and transfer it into heat, which induces phase transitions in liposomes and triggers the contents release. In conclusion, external signal-activated liposomes offer an advanced platform for numerous applications in drug delivery, particularly in the localized drug delivery. Drug release may be localized to the target site with triggering stimulus that results in better therapeutic response and less adverse effects. Triggering signal and mechanism of activation can be selected according to a specific application.

Towards real-time understanding of processes in pharmaceutical powder technology

There is a need for better understanding of the processes and new ideas to develop traditional pharmaceutical powder manufacturing procedures. Process analytical technology (PAT) has been developed to improve understanding of the processes and establish methods to monitor and control processes. The interest is in maintaining and even improving the whole manufacturing process and the final products at real-time. Process understanding can be a foundation for innovation and continuous improvement in pharmaceutical development and manufacturing. New methods are craved for to increase the quality and safety of the final products faster and more efficiently than ever before. The real-time process monitoring demands tools, which enable fast and noninvasive measurements with sufficient accuracy. Traditional quality control methods have been laborious and time consuming and they are performed off line i.e. the analysis has been removed from process area. Vibrational spectroscopic methods are responding this challenge and their utilisation have increased a lot during the past few years. In addition, other methods such as colour analysis can be utilised in noninvasive real-time process monitoring. In this study three pharmaceutical processes were investigated: drying, mixing and tabletting. In addition tablet properties were evaluated. Real-time monitoring was performed with NIR and Raman spectroscopies, colour analysis, particle size analysis and compression data during tabletting was evaluated using mathematical modelling. These methods were suitable for real-time monitoring of pharmaceutical unit operations and increase the knowledge of the critical parameters in the processes and the phenomena occurring during operations. They can improve our process understanding and therefore, finally, enhance the quality of final products.

Toward Figural Fantasy : The Representation of Consciousness in Modern American Fantasy Literature

Tajunnanesitys amerikkalaisessa heterodiegeettisessä fantasiakirjallisuudessa on muuttunut merkittävästi viimeisen kolmen vuosikymmenen aikana: kerrontaa orientoiva ja tarinamaailmaa havainnoiva tajunta on vähin erin vaihtunut kaikkitietävästä kertojasta tarinan sisäiseksi henkilöhahmoksi. Kertoja on samalla vetäytynyt yhä syvemmälle kerronnan kulissien taakse. Tämä tutkielma hahmottaa ja analysoi kyseistä muutosta siirtymänä kertojakeskeisestä kerronnasta kohti henkilökeskeistä kerrontaa. Tutkielmassa tajunnanesityksen teoreettisen kehyksen muodostavat F. K. Stanzelin kertojakeskeisen ja henkilökeskeisen kerrontatilanteen käsitteet. Kerrontatilanteita tarkennetaan fokalisaation, vapaan epäsuoran esityksen, sisäisen monologin ja psykonarraation teorioiden avulla. Tutkielma jakaantuu kahteen osaan. Ensimmäisessä osassa vertaillaan kahta prototyyppistä fantasiaromaania syväluotaavan narratologisen analyysin keinoin. Kertojakeskeistä kerrontaa edustaa Fritz Leiberin "The Swords of Lankhmar" (1968) ja henkilökeskeistä kerrontaa George R. R. Martinin "A Game of Thrones" (1996). Toisessa osassa tarkastellaan pääpiirteittäin kuuttatoista muuta aikaansa edustavaa fantasiaromaania ja hahmotetaan tajunnanesityksen muutoksen kronologista kulkua. Yhdessä osat ilmentävät, kuinka amerikkalainen heterodiegeettinen fantasiakirjallisuus on muuttunut kerrontateknisesti henkilökeskeisemmäksi. Tutkielma on ensimmäinen laatuaan, ja sen on tarkoitus luoda pohjaa uudenlaiselle modernin fantasiakirjallisuuden tutkimukselle ja kirjalliselle arvostukselle.

Filosofins renässans eller modern mystik : Bergsondebatten i Finland

The study examines the debate in Finland at the beginning of the 20th century surrounding the philosophy of Henri Bergson. Both within as well as outside of academic philosophy Bergsonism was adapted to the philosophical and cultural landscape in Finland by a process of selective appropriation. The ambiguous relationship between the sender and the receiver is accentuated in reference to philosophical celebrities such as Bergson, whose reputations spread more quickly than the content of their philosophy and whose names are drawn into the political and social discourse. As a philosophical movement the aim of Bergsonism was to create a scientific philosophy of life as an alternative to both idealism and modern empirical and antimetaphysical currents, during a period when European philosophy was searching for new guidelines after the collapse of the idealistic system philosophies of the 19th century. This reorientation is examined from a Finnish viewpoint and in the light of the process of intellectual importation. The study examines how elements from an international discourse were appropriated within the philosophical field in Finland against a background of changes in the role of the university and the educated elites as well as the position of philosophy within the disciplinary hierarchy. Philosophical reception was guided by expectations that had arisen in a national context, for example when Bergsonism in Finland was adjusted to a moral and educational ideal of self-cultivation, and often served as a means for philosophers to internationalize their own views in order to strengthen their position on the national stage. The study begins with some introductory remarks on the international circulation of ideas from the point of view of the periphery. The second section presents an overview of the shaping of the philosophical field at the turn of the 20th century, the naturalism and positivism of the late 19th century that were the objects of Bergson s critique, and an introduction to the attempts of a philosophy of life to make its way between idealism and naturalism. The third and main section of the study begins with a brief presentation of the main features of the philosophy of Bergson, followed by a closer examination of the different comments and analyses that it gave rise to in Finland. The final section addresses the ideological implications of Bergsonism within the framework of a political annexation of the philosophy of life at the beginning of the 20th century.

Luonto, tiede ja teknologia : Kansanvalistuksen Suomi-kuva 1870-1920

Nature, science and technology. The image of Finland through popular enlightenment texts 1870-1920 This doctoral thesis looks at how Finnish popular enlightenment texts published between 1870 and 1920 took part in the process of forming a genuine Finnish national identity. The same process was occurring in other Nordic countries at the time and the process in Finland was in many ways influenced by them, particularly Sweden. In Finland the political realities under Russian rule especially during the Russification years, and the fact that its history was considered to be short compared to other European countries, made this nation-building process unique. The undertaking was led by members of the national elite, influential in the cultural, academic as well as political arenas, who were keen to support the foundation of a modern Finnish identity. The political realities and national philosophy of history necessitated a search for elements of identity in nature and the Finnish landscape, which were considered to have special national importance: Finland was very much determined as a political entity on the basis of its geography and nature. Nature was also used as means of taking a cultural or political view in terms of, for example, geographical facts such as the nation s borders or the country s geographical connections to Western Europe. In the building of a proper national identity the concept of nature was not, however, static, but was more or less affected by political and economic progress in society. This meant that nature, or the image of the national landscape, was no longer seen only as a visual image of the national identity, but also as a source of science, technology and a prosperous future. The role of technology in this process was very much connected to the ability to harness natural resources to serve national interests. The major change in this respect had occurred by the early 20th century, when indisputable scientific progress altered the relationship between nature and technology. Concerning technology, the thesis is mainly interested in the large and at the time modern technological manifestations, such as railways, factories and industrial areas in Finland. Despite the fact that the symbiosis between national nature and international but successfully localized technology was in Finnish popular enlightenment literature depicted mostly as a national success story, concerns began to arise already in last years of the 19th century. It was argued that the emerging technology would eventually destroy Finland s natural environment, and therefore the basis of its national identity. The question was not how to preserve nature through natural science, but more how to conserve such natural resources and images that were considered to be the basis of national identity and thus of the national history. National parks, isolated from technology, and distant enough so as to have no economic value, were considered the solution to the problem. Methodologically the thesis belongs to the genre of science and technology studies, and offers new viewpoints with regard to both the study of Finnish popular enlightenment literature and the national development process as a whole.