Language change as an evolutionary process

In the thesis it is discussed in what ways concepts and methodology developed in evolutionary biology can be applied to the explanation and research of language change. The parallel nature of the mechanisms of biological evolution and language change is explored along with the history of the exchange of ideas between these two disciplines. Against this background computational methods developed in evolutionary biology are taken into consideration in terms of their applicability to the study of historical relationships between languages. Different phylogenetic methods are explained in common terminology, avoiding the technical language of statistics. The thesis is on one hand a synthesis of earlier scientific discussion, and on the other an attempt to map out the problems of earlier approaches in addition to finding new guidelines in the study of language change on their basis. Primarily literature about the connections between evolutionary biology and language change, along with research articles describing applications of phylogenetic methods into language change have been used as source material. The thesis starts out by describing the initial development of the disciplines of evolutionary biology and historical linguistics, a process which right from the beginning can be seen to have involved an exchange of ideas concerning the mechanisms of language change and biological evolution. The historical discussion lays the foundation for the handling of the generalised account of selection developed during the recent few decades. This account is aimed for creating a theoretical framework capable of explaining both biological evolution and cultural change as selection processes acting on self-replicating entities. This thesis focusses on the capacity of the generalised account of selection to describe language change as a process of this kind. In biology, the mechanisms of evolution are seen to form populations of genetically related organisms through time. One of the central questions explored in this thesis is whether selection theory makes it possible to picture languages are forming populations of a similar kind, and what a perspective like this can offer to the understanding of language in general. In historical linguistics, the comparative method and other, complementing methods have been traditionally used to study the development of languages from a common ancestral language. Computational, quantitative methods have not become widely used as part of the central methodology of historical linguistics. After the fading of a limited popularity enjoyed by the lexicostatistical method since the 1950s, only in the recent years have also the computational methods of phylogenetic inference used in evolutionary biology been applied to the study of early language history. In this thesis the possibilities offered by the traditional methodology of historical linguistics and the new phylogenetic methods are compared. The methods are approached through the ways in which they have been applied to the Indo-European languages, which is the most thoroughly investigated language family using both the traditional and the phylogenetic methods. The problems of these applications along with the optimal form of the linguistic data used in these methods are explored in the thesis. The mechanisms of biological evolution are seen in the thesis as parallel in a limited sense to the mechanisms of language change, however sufficiently so that the development of a generalised account of selection is deemed as possibly fruiful for understanding language change. These similarities are also seen to support the validity of using phylogenetic methods in the study of language history, although the use of linguistic data and the models of language change employed by these models are seen to await further development.

Technical efficiency of blood component preparation in blood centres of 10 European countries

Various reasons, such as ethical issues in maintaining blood resources, growing costs, and strict requirements for safe blood, have increased the pressure for efficient use of resources in blood banking. The competence of blood establishments can be characterized by their ability to predict the volume of blood collection to be able to provide cellular blood components in a timely manner as dictated by hospital demand. The stochastically varying clinical need for platelets (PLTs) sets a specific challenge for balancing supply with requests. Labour has been proven a primary cost-driver and should be managed efficiently. International comparisons of blood banking could recognize inefficiencies and allow reallocation of resources. Seventeen blood centres from 10 countries in continental Europe, Great Britain, and Scandinavia participated in this study. The centres were national institutes (5), parts of the local Red Cross organisation (5), or integrated into university hospitals (7). This study focused on the departments of blood component preparation of the centres. The data were obtained retrospectively by computerized questionnaires completed via Internet for the years 2000-2002. The data were used in four original articles (numbered I through IV) that form the basis of this thesis. Non-parametric data envelopment analysis (DEA, II-IV) was applied to evaluate and compare the relative efficiency of blood component preparation. Several models were created using different input and output combinations. The focus of comparisons was on the technical efficiency (II-III) and the labour efficiency (I, IV). An empirical cost model was tested to evaluate the cost efficiency (IV). Purchasing power parities (PPP, IV) were used to adjust the costs of the working hours and to make the costs comparable among countries. The total annual number of whole blood (WB) collections varied from 8,880 to 290,352 in the centres (I). Significant variation was also observed in the annual volume of produced red blood cells (RBCs) and PLTs. The annual number of PLTs produced by any method varied from 2,788 to 104,622 units. In 2002, 73% of all PLTs were produced by the buffy coat (BC) method, 23% by aphaeresis and 4% by the platelet-rich plasma (PRP) method. The annual discard rate of PLTs varied from 3.9% to 31%. The mean discard rate (13%) remained in the same range throughout the study period and demonstrated similar levels and variation in 2003-2004 according to a specific follow-up question (14%, range 3.8%-24%). The annual PLT discard rates were, to some extent, associated with production volumes. The mean RBC discard rate was 4.5% (range 0.2%-7.7%). Technical efficiency showed marked variation (median 60%, range 41%-100%) among the centres (II). Compared to the efficient departments, the inefficient departments used excess labour resources (and probably) production equipment to produce RBCs and PLTs. Technical efficiency tended to be higher when the (theoretical) proportion of lost WB collections (total RBC+PLT loss) from all collections was low (III). The labour efficiency varied remarkably, from 25% to 100% (median 47%) when working hours were the only input (IV). Using the estimated total costs as the input (cost efficiency) revealed an even greater variation (13%-100%) and overall lower efficiency level compared to labour only as the input. In cost efficiency only, the savings potential (observed inefficiency) was more than 50% in 10 departments, whereas labour and cost savings potentials were both more than 50% in six departments. The association between department size and efficiency (scale efficiency) could not be verified statistically in the small sample. In conclusion, international evaluation of the technical efficiency in component preparation departments revealed remarkable variation. A suboptimal combination of manpower and production output levels was the major cause of inefficiency, and the efficiency did not directly relate to production volume. Evaluation of the reasons for discarding components may offer a novel approach to study efficiency. DEA was proven applicable in analyses including various factors as inputs and outputs. This study suggests that analytical models can be developed to serve as indicators of technical efficiency and promote improvements in the management of limited resources. The work also demonstrates the importance of integrating efficiency analysis into international comparisons of blood banking.

Developing a Multidisciplinary Process View of IFC Standardization

The industry foundation classes (IFC) file format is one of the most complex and ambitious IT standardization projects currently being undertaken in any industry, focusing on the development of an open and neutral standard for exchanging building model data. Scientific literature related to the IFC standard has dominantly been technical so far; research looking at the IFC standard from an industry standardization per- spective could offer valuable new knowledge for both theory and practice. This paper proposes the use of IT standardization and IT adoption theories, supported by studies done within construction IT, to lay a theoretical foundation for further empirical analysis of the standardization process of the IFC file format.

Customer Value in E-Service: Conceptual Foundation and Empirical Evidence

Customer value has been identified as “the reason” for customers to patronize a firm, and as one of the fundamental blocks that market exchanges build upon. Despite the importance of customer value, it is often poorly defined, or seems to refer to different phenomena. This dissertation contributes to current marketing literature by subjecting the value concept to a critical investigation, and by clarifying its conceptual foundation. Based on the literature review, it is proposed that customer value can be divided into two separate, but interrelated aspects: value creation processes, and value outcome determination. This means that on one hand, it is possible to examine those activities through which value is created, and on the other hand, investigate how customers determine the value outcomes they receive. The results further show that customers may determine value in four different ways: value as a benefit/sacrifice ratio, as experience outcomes, as means-end chains, and value as phenomenological. In value as benefit/sacrifice ratio, customers are expected to calculate the ratio between service benefits (e.g. ease of use) and sacrifices (e.g. price). In value as experience outcomes, customers are suggested to experience multiple value components, such as functional, emotional, or social value. Customer value as means-ends chains in turn models value in terms of the relationships between service characteristics, use value, and desirable ends (e.g. social acceptance). Finally, value as phenomenological proposes that value emerges from lived, holistic experiences. The empirical papers investigate customer value in e-services, including online health care and mobile services, and show how value in e-service stems from the process and content quality, use context, and the service combination that a customer uses. In conclusion, marketers should understand that different value definitions generate different types of understanding of customer value. In addition, it is clear that studying value from several perspectives is useful, as it enables a richer understanding of value for the different actors. Finally, the interconnectedness between value creation and determination is surprisingly little researched, and this dissertation proposes initial steps towards understanding the relationship between the two.

Perceptions Towards Adoption of Mobile Self-services: A Case Study (Available in Hanken intranet only)

This thesis is an exploratory case study that aims to understand the attitudes affecting adoption of mobile self-services. This study used a demo mobile self-service that could be used by consumers for making address changes. The service was branded with a large and trusted Finnish brand. The theoretical framework that was used consisted of adoption theories of technology, adoption theories of self-service and literature concerning mobile services. The reviewed adoption theories of both technology and self-service had their foundation in IDT or TRA/TPB. Based on the reviewed theories an initial framework was created. The empirical data collection was done through three computer aided group interview sessions with a total of 32 respondents. The data analysis started from the premises of the initial framework. Based on the empirical data the framework was constantly reviewed and altered and the data recoded accordingly. The result of this thesis was a list of attitudinal factors that affect the adoption of a mobile self-service either positively or negatively. The factors that were found to affect the attitudes towards adoption of mobile self-services positively were: that the service was time & place independent and saved time. Most respondents, but not all, also had a positive attitude towards adoption due to ease of use and being mentally compatible with the service. Factors that affected adoption negatively were lack of technical compatibility, perceived risk for high costs and risk for malicious software. The identified factors were triangulated in respect to existing literature and general attitudes towards mobile services.

Enterprise architecture – the foundation for a strategy

Artikkeli selostaa kokonaisarkkitehtuurin käsitettä ja Kansallinen digitaalinen kirjasto -hankkeen kokonaisarkkitehtuurin laatimista. Kokonaisarkkitehtuuri on tietohallinnon strategisen suunnittelun ja johtamisen väline, mutta sillä on monia käytännöllisempia käyttötarkoituksia esimerkiksi tietojärjestelmien kehittämisessä. Kansallinen digitaalinen kirjasto on opetus- ja kulttuuriministeriön tavoitteena on varmistaa kulttuurin ja tieteen digitaalisten tietovarantojen tehokas ja laadukas hallinta, jakelu ja pitkäaikaissäilytys. Lisäksi hankkeessa edistetään kulttuuriperintö- ja asiakirja-aineistojen digitointia.

Public and private technical assistance programs for non-industrial private forest landowners in the southern United States.

XVIII IUFRO World Congress, Ljubljana 1986.