Thin-Layer Chromatography with Ultraviolet and Mass Spectrometric Detection: From Preparative-Layer to Miniaturized Ultra-Thin-Layer Technique

The present challenge in drug discovery is to synthesize new compounds efficiently in minimal time. The trend is towards carefully designed and well-characterized compound libraries because fast and effective synthesis methods easily produce thousands of new compounds. The need for rapid and reliable analysis methods is increased at the same time. Quality assessment, including the identification and purity tests, is highly important since false (negative or positive) results, for instance in tests of biological activity or determination of early-ADME parameters in vitro (the pharmacokinetic study of drug absorption, distribution, metabolism, and excretion), must be avoided. This thesis summarizes the principles of classical planar chromatographic separation combined with ultraviolet (UV) and mass spectrometric (MS) detection, and introduces powerful, rapid, easy, low-cost, and alternative tools and techniques for qualitative and quantitative analysis of small drug or drug-like molecules. High performance thin-layer chromatography (HPTLC) was introduced and evaluated for fast semi-quantitative assessment of the purity of synthesis target compounds. HPTLC methods were compared with the liquid chromatography (LC) methods. Electrospray ionization mass spectrometry (ESI MS) and atmospheric pressure matrix-assisted laser desorption/ionization MS (AP MALDI MS) were used to identify and confirm the product zones on the plate. AP MALDI MS was rapid, and easy to carry out directly on the plate without scraping. The PLC method was used to isolate target compounds from crude synthesized products and purify them for bioactivity and preliminary ADME tests. Ultra-thin-layer chromatography (UTLC) with AP MALDI MS and desorption electrospray ionization mass spectrometry (DESI MS) was introduced and studied for the first time. Because of the thinner adsorbent layer, the monolithic UTLC plate provided 10 100 times better sensitivity in MALDI analysis than did HPTLC plates. The limits of detection (LODs) down to low picomole range were demonstrated for UTLC AP MALDI and UTLC DESI MS. In a comparison of AP and vacuum MALDI MS detection for UTLC plates, desorption from the irregular surface of the plates with the combination of an external AP MALDI ion source and an ion trap instrument provided clearly less variation in mass accuracy than the vacuum MALDI time-of-flight (TOF) instrument. The performance of the two-dimensional (2D) UTLC separation with AP MALDI MS method was studied for the first time. The influence of the urine matrix on the separation and the repeatability was evaluated with benzodiazepines as model substances in human urine. The applicability of 2D UTLC AP MALDI MS was demonstrated in the detection of metabolites in an authentic urine sample.

Kohti lyyristä abstraktismia : Anitra Lucanderin 1950-luvun modernismi

Towards Lyrical Abstraction Anitra Lucander s Modernism in the 1950s Anitra Lucander (1918-2000) was one of the early pioneers of abstract art in Finland. During the Second World War Finnish art and cultural life was isolated and stagnated and figurative art was still dominant after the war. In the late 1940s and early 1950s, new international abstract art movements started to come to Finland. Anitra Lucander was one of the artists of the younger generation after the war who took an interest in the abstract movements in the early 1950s. At the beginning of the 1950s, abstract art came to Finland primarily in the form of Concretism, but simultaneously, a more delicate abstract movement emerged, and Anitra Lucander was among those cultivating such conceptions in her art. In this thesis, I observe and analyze through Anitra Lucander s art this central movement in Finnish modern art that has not yet been extensively studied. I examine how Anitra Lucander s art connects with the style change in Finnish art. I scrutinize the factors that affected Lucander and turned her towards abstract expression, and the effect her art had on emergence of abstract art in Finland. I will also consider the development of her art, the reception and critique of her art and the effect the critique had on her position in the 1950s art world. Because of a lack of earlier studies, I will undertake basic research, relying on empirical primary source material, where the starting point is to place the phenomenon under examination in the historical and cultural context. The most significant study materials are the artist s paintings and graphics from 1948 to 1960, newspaper and magazine articles from the same era, archive sources and interviews with Lucander s relatives, fellow artists and friends. An interesting aspect of the topic is the fact that Anitra Lucander was the only woman among the important pioneers of early Finnish abstract art. Through Lucander s art, I also examine the position of female artists in the tradition of Modernism as well as in the Finnish art world of the 1950s. This theoretical background is provided by the studies of feminist art historians, such as Marsha Meskimmon, Gill Perry, Griselda Pollock and Anne Middleton Wagner. Lucander s position in the male-dominated Finnish art scene of the 1950s, and how she achieved her position, emerges as one of the central themes of the study. I will also observe whether gender is evident in Lucander s art and expression, as well as her reception and critique compared to the reception of her male colleagues art. From a woman s point of view, I reveal the masculine rhetoric and gendered attitudes in the critique of the era. As a theoretical and methodological frame of reference, I use discourse analysis. Anitra Lucander encountered modernistic, international art movements during her journeys to Paris in the late 1940s and early 1950s. Her art evolved from the geometric Concretism of the early decade towards more delicate and painterly abstract expression. After the mid-1950s, she had developed her signature expression; through Cubism and a collage technique, she developed in her painting a delicate, coloristic imagery, which can be characterized as Lyrical Abstraction. Lucander did not consider abstract expression to be categorical, but saw the abstract and the nonfigurative as equals: the line between the abstract and the figurative is very often fleeting in her art. Already in her own time, Lucander achieved a position as one of the most talented young artists of her generation and her work was included in significant exhibitions. This success can definitely be attributed to the fact that she embraced Modernism in its extreme form, abstraction, already at the beginning of her career and networked with male painters who shared her outlook and modernistic expression. For her, this was either a conscious or an unconscious method of adapting to the male-dominated Finnish art field in the 1950s. In spite of acclaim and attention, Lucander had to encounter the gendered attitudes in the critique of the time, and her art was often perceived through stereotypical views as overly feminine and dependent. However, with her art, Lucander played an important role in the breakthrough for colorism and abstract art in Finland in the 1950s.

Ohjaukselliset käytännöt yliopisto-opintojen alkuvaiheessa : Maatalous-metsätieteellisen tiedekunnan opiskelijoiden merkitykselliset kokemukset ensimmäisen opiskeluvuoden ohjauksesta

In this Master's Thesis I study guidance practises, which facilitate first year students' integration into the university. Besides formal guidance, for example tutoring and peer tutoring, general student advising and introduction courses, I address my research to informal everyday guidance practices. I aim to highlight existing supportive practices, which are meaningful from the university students' perspective. My aim is to study what kind of guidance practises exists in university and how these practises support first year student. The aim of the guidance practises is to facilitate new university student to integrate into the academic community. I study the implementation of this aim as a development of an academic identity, which requires that students have an opportunity for guided participation in academic practises. The research is based on phenomenological-hermeneutic research tradition, and my aim is to produce information of students' everyday experiences and meanings. My informants were students of agriculture and forestry at University of Helsinki. I gathered research material utilizing the critical incident technique in 11 theme interviews, which I carried out with individuals, pairs or small groups. During interviews I asked the students to describe and evaluate their first year guidance experiences, especially those that were extreme positive or negative. Based on my research I specified four meaningful guidance practices: care of students, transparency of the practises of the learning community, presence of guidance in everyday activities of a student and communal reflection to studies. I represent the character and components of the guidance practises, and I also describe the meaning of those practises to university students. Keywords: Guidance practices, guidance, first year studies, academic community, integration, academic identity,critical incidents

Käsityökohtaamisia muinaisuuden kanssa : Neulalla neulominen eli kinnasneulatekniikka ...muutakin kuin neulakinnas?

The aim of this study was to find out how the technique of knotless netting is perceived by the craftsperson of the twenty first century. In this study the craftspeople are represented by the researcher herself, seven craftspeople and teachers (3) teaching knotless netting as well as their students (21). The main interests of this study are the mental pictures and relationship to knotless netting that craftspeople have in the twenty first century. Points of focus are also the specific characteristics of knotless netting, as well as experimenting with new and different materials. The aim of these experiments has been to find new and unusual uses for knotless netting. Preserving knotless netting as a craft and technique are also questions dealt with in this study. The methodology of this study is a qualitative and phenomenographic study of several cases. The data collected are interviews of the teachers, observations in two knotless netting courses, questionnaires answered by the students in these courses and experimental samples made by the author and evaluated by other craftspeople. These samples were made during the years 2005-2008. The interviews, questionnaires and evaluations were conducted under winter and spring 2008. The reference literature is comprised from publications in several different fields. In this study ethnography is the most dominant field of reference due to the fact that knotless netting is so strongly linked to history and antiquity. In the past the technique of knotless netting has been passed down from generation to generation in whatever form the teacher has known. There are many different ways of stitching and binding in knotless netting. This technique is closely connected to traditional knotless netting mittens even today. Nowadays knotless knitting is taught in craft schools, evening classes and in other recreational courses. The concrete understanding of knotless netting by means of two-dimensional instructions is challenging. Craftspeople often require somebody to actually demonstrate the correct way to make the stitches and hold the work before they can proceed with the technique. The way knotless netting is perceived by craftspeople is linked to their backgrounds and preconstructed mental images concerning the technique. An etnographer approaches knotless netting in a different way from a crafts-scientist or a person in an evening class wishing to master the technique. The attitude of the teacher is passed on to students and also affects the way the student perceives knotless netting and its possibilities as a technique. A craftsperson has mixed feelings toward knotted netting. On the other hand the surfaces produced by this rare technique are intriguing but the costs due to the slow manufacturing process are seen as an encumbrance.

Kinnasneulatekniikan verkko-oppimateriaalin kehittäminen ja neulalla neulomisen taidon kehittyminen

The purpose of the study was to develop a functional web-based learning material for the learning of the nålbinding technique. The study of the research topic was already begun in my pedagogical thesis in 2008 by considering the demands on pedagogic material for the teaching of the technique. This study falls into the field of qualitative design research which was carried out through three stages. In the study three methods of usability testing, i.e. expert analysis, the informants’ thinking aloud and interviews, were used as research methods. At the first stage of the study the first version of the learning material was created. This was done on the basis of theoretical knowledge, the demands set on learning materials as clarified in previous studies, on the basis of previously created learning materials for the learning of the nålbinding technique as well as with the help of two experts on the technique. At the second stage, the learning material was developed on the basis of expert analysis and another version of the material was created. At the third stage, usability testing was carried out on the material. At this stage two informants used the material, practiced stitching with the nålbinding needle and thought aloud while doing so. In the usability testing the Morae –programme was used to record the events on the screen, the actions of the informants and their spoken out thoughts. The Morae –programme was also used when analysing the recordings. After the testing, the informants practised stitching independently and in a few weeks time they were interviewed. The interviews were aimed at finding out the informants’ opinions on the future development of the material. On the basis of the informants’ independent attempts at using the nålbinding technique, the development of their skills after the testing was also discussed at the interviews. The development of the learning material will continue after this study on the basis of the usability testing and the interviews. The web-based learning material was created for the website Käspaikka in the address www.kaspaikka.fi/kinnasneula. By creating a multimodal learning material the dual-coding theory by Paivio was taken into consideration. According to the theory, several methods of presentation help a learner to restore information in his/her memory. The independent construction of the learner’s knowledge, i.e. learning according to the principles of the constructivist learning theory, was also supported by creating a logical navigation system, by linking interrelated topics to one another and by presenting the topics in several different forms. In the test situations the learning material was judged to work well when practising stitching with the nålbinding needle. Both informants learned the basics of the nålbinding technique even though their respective learning strategies were quite different. In the usability testing illogicalities and shortcomings were still noticed in the learning material which will still be further developed in the future.

Impact of dental insurance on adults’ oral health care in Tehran, Iran.

The aim of the present study was to determine relationships between insurance status and utilization of oral health care and its characteristics and to identify factors related to insured patients’ selection of dental clinic or dentist. The study was based on cross-sectional data obtained through phone interviews. The target population included adults in the city of Tehran. Using a two-stage stratified random technique, 3,200 seven-digit numbers resembling real phone numbers were drawn; when calling, 1,669 numbers were unavailable (busy, no answer, fax, line blocked). Of the 1,531 subjects who answered the phone call, 224 were outside the target age (under 18), and 221 refused to respond, leaving 1,086 subjects in the final sample. The interviews were carried out using a structured questionnaire and covered characteristics of dental visits, the respondent’s reason for selecting a particular dentist or clinic and demographic and socio-economic background (gender, age, level of education, income, and insurance status). Data analysis included the Chi-square test, ANOVA, and logistic regression and the corresponding odds ratios (OR). Of all the 1,086 respondents, 57% were women, 62% were under age 35, 46% had a medium and 34% a high level of education, 13% were under the poverty line, and 70% had insurance coverage; 64% with the public, and 6% with a commercial insurance. Having insurance coverage was more likely for women (OR=1.5), for those in the oldest age group (OR=2.0), and for those with a high level of education (OR=2.5). Of those with dental insurance, 54% reported having had a dental visit within the past 12 months ; more often by those with commercial insurance in comparison with public (65% vs. 53% p<0.001). Check-up as the reason for the most recent visit occurred most frequently among those with commercial insurance (28%) compared with those having public insurance (16%) or being non-insured (13%) (p<0.001). Having had two or more dental visits within the past 12 months was most common among insured respondents, when compared with the non-insured (31% vs. 22% p=0.01). The non-insured respondents reported tooth extractions almost twice as frequently as did the insured ones (p<0.001). Of the 726 insured subjects, 60% selected fully out-of-pocket-paid services (FOP), and 53% were unaware of their insurance benefits. Of those who selected FOP, good interpersonal aspects (OR=4.6), being unaware of dental insurance benefits (OR=4.6), and good technical aspects (OR=2.3) as a reason had greater odds of selecting FOP. The present study revealed that dental insurance was positively related to demand for oral health care as well as to utilization of services, but to the latter with a minor extent. Among insured respondents, despite their opportunity to use fully or highly subsidized oral health care services, good interpersonal relationship and high quality of services were the most important factors when an insured patient selected a dentist or a clinic. The present findings indicate a clear need to modify dental insurance systems in Iran to facilitate optimal use of oral health care services to maximize the oral health of the population. A special emphasis in the insurance schemes should be focused on preventive care.

Capillary electrochromatography: a versatile instrumental technique for nanodomain interaction studies

This doctoral thesis describes the development of a miniaturized capillary electrochromatography (CEC) technique suitable for the study of interactions between various nanodomains of biological importance. The particular focus of the study was low-density lipoprotein (LDL) particles and their interaction with components of the extracellular matrix (ECM). LDL transports cholesterol to the tissues through the blood circulation, but when the LDL level becomes too high the particles begin to permeate and accumulate in the arteries. Through binding sites on apolipoprotein B-100 (apoB-100), LDL interacts with components of the ECM, such as proteoglycans (PGs) and collagen, in what is considered the key mechanism in the retention of lipoproteins and onset of atherosclerosis. Hydrolytic enzymes and oxidizing agents in the ECM may later successively degrade the LDL surface. Metabolic diseases such as diabetes may provoke damage of the ECM structure through the non-enzymatic reaction of glucose with collagen. In this work, fused silica capillaries of 50 micrometer i.d. were successfully coated with LDL and collagen, and steroids and apoB-100 peptide fragments were introduced as model compounds for interaction studies. The LDL coating was modified with copper sulphate or hydrolytic enzymes, and the interactions of steroids with the native and oxidized lipoproteins were studied. Lipids were also removed from the LDL particle coating leaving behind an apoB-100 surface for further studies. The development of collagen and collagen decorin coatings was helpful in the elucidation of the interactions of apoB-100 peptide fragments with the primary ECM component, collagen. Furthermore, the collagen I coating provided a good platform for glycation studies and for clarification of LDL interactions with native and modified collagen. All methods developed are inexpensive, requiring just small amounts of biomaterial. Moreover, the experimental conditions in CEC are easily modified, and the analyses can be carried out in a reasonable time frame. Other techniques were employed to support and complement the CEC studies. Scanning electron microscopy and atomic force microscopy provided crucial visual information about the native and modified coatings. Asymmetrical flow field-flow fractionation enabled size measurements of the modified lipoproteins. Finally, the CEC results were exploited to develop new sensor chips for a continuous flow quartz crystal microbalance technique, which provided complementary information about LDL ECM interactions. This thesis demonstrates the potential of CEC as a valuable and flexible technique for surface interaction studies. Further, CEC can serve as a novel microreactor for the in situ modification of LDL and collagen coatings. The coatings developed in this study provide useful platforms for a diversity of future investigations on biological nanodomains.

Copper Diffusion Barrier Deposition on Integrated Circuit Devices by Atomic Layer Deposition Technique

Transfer from aluminum to copper metallization and decreasing feature size of integrated circuit devices generated a need for new diffusion barrier process. Copper metallization comprised entirely new process flow with new materials such as low-k insulators and etch stoppers, which made the diffusion barrier integration demanding. Atomic Layer Deposition technique was seen as one of the most promising techniques to deposit copper diffusion barrier for future devices. Atomic Layer Deposition technique was utilized to deposit titanium nitride, tungsten nitride, and tungsten nitride carbide diffusion barriers. Titanium nitride was deposited with a conventional process, and also with new in situ reduction process where titanium metal was used as a reducing agent. Tungsten nitride was deposited with a well-known process from tungsten hexafluoride and ammonia, but tungsten nitride carbide as a new material required a new process chemistry. In addition to material properties, the process integration for the copper metallization was studied making compatibility experiments on different surface materials. Based on these studies, titanium nitride and tungsten nitride processes were found to be incompatible with copper metal. However, tungsten nitride carbide film was compatible with copper and exhibited the most promising properties to be integrated for the copper metallization scheme. The process scale-up on 300 mm wafer comprised extensive film uniformity studies, which improved understanding of non-uniformity sources of the ALD growth and the process-specific requirements for the ALD reactor design. Based on these studies, it was discovered that the TiN process from titanium tetrachloride and ammonia required the reactor design of perpendicular flow for successful scale-up. The copper metallization scheme also includes process steps of the copper oxide reduction prior to the barrier deposition and the copper seed deposition prior to the copper metal deposition. Easy and simple copper oxide reduction process was developed, where the substrate was exposed gaseous reducing agent under vacuum and at elevated temperature. Because the reduction was observed efficient enough to reduce thick copper oxide film, the process was considered also as an alternative method to make the copper seed film via copper oxide reduction.

Development of a new flexor tendon repair technique performed with bioabsorbable poly-L/D-lactide (PLDLA) suture

Sormen koukistajajännevamman korjauksen jälkeisen aktiivisen mobilisaation on todettu johtavan parempaan toiminnalliseen lopputulokseen kuin nykyisin yleisesti käytetyn dynaamisen mobilisaation. Aktiivisen mobilisaation ongelma on jännekorjauksen pettämisriskin lisääntyminen nykyisten ommeltekniikoiden riittämättömän vahvuuden vuoksi. Jännekorjauksen lujuutta on parannettu kehittämällä monisäieommeltekniikoita, joissa jänteeseen tehdään useita rinnakkaisia ydinompeleita. Niiden kliinistä käyttöä rajoittaa kuitenkin monimutkainen ja aikaa vievä tekninen suoritus. Käden koukistajajännekorjauksessa käytetään yleisesti sulamattomia ommelmateriaaleja. Nykyiset käytössä olevat biohajoavat langat heikkenevät liian nopeasti jänteen paranemiseen nähden. Biohajoavan laktidistereokopolymeeri (PLDLA) 96/4 – langan vetolujuuden puoliintumisajan sekä kudosominaisuuksien on aiemmin todettu soveltuvan koukistajajännekorjaukseen. Tutkimuksen tavoitteena oli kehittää välittömän aktiivisen mobilisaation kestävä ja toteutukseltaan yksinkertainen käden koukistajajännekorjausmenetelmä biohajoavaa PLDLA 96/4 –materiaalia käyttäen. Tutkimuksessa analysoitiin viiden eri yleisesti käytetyn koukistajajänneompeleen biomekaanisia ominaisuuksia staattisessa vetolujuustestauksessa ydinompeleen rakenteellisten ominaisuuksien – 1) säikeiden (lankojen) lukumäärän, 2) langan paksuuden ja 3) ompeleen konfiguraation – vaikutuksen selvittämiseksi jännekorjauksen pettämiseen ja vahvuuteen. Jännekorjausten näkyvän avautumisen todettiin alkavan perifeerisen ompeleen pettäessä voima-venymäkäyrän myötöpisteessä. Ydinompeleen lankojen lukumäärän lisääminen paransi ompeleen pitokykyä jänteessä ja suurensi korjauksen myötövoimaa. Sen sijaan paksumman (vahvemman) langan käyttäminen tai ompeleen konfiguraatio eivät vaikuttaneet myötövoimaan. Tulosten perusteella tutkittiin mahdollisuuksia lisätä ompeleen pitokykyä jänteestä yksinkertaisella monisäieompeleella, jossa ydinommel tehtiin kolmen säikeen polyesterilangalla tai nauhamaisen rakenteen omaavalla kolmen säikeen polyesterilangalla. Nauhamainen rakenne lisäsi merkitsevästi ompeleen pitokykyä jänteessä parantaen myötövoimaa sekä maksimivoimaa. Korjauksen vahvuus ylitti aktiivisen mobilisaation jännekorjaukseen kohdistaman kuormitustason. PLDLA 96/4 –langan soveltuvuutta koukistajajännekorjaukseen selvitettiin tutkimalla langan biomekaanisia ominaisuuksia ja solmujen pito-ominaisuuksia staattisessa vetolujuustestauksessa verrattuna yleisimmin jännekorjauksessa käytettävään punottuun polyesterilankaan (Ticron®). PLDLA –langan todettiin soveltuvan hyvin koukistajajännekorjaukseen, sillä se on polyesterilankaa venymättömämpi ja solmujen pitävyys on parempi. Viimeisessä vaiheessa tutkittiin PLDLA 96/4 –langasta valmistetulla kolmisäikeisellä, nauhamaisella jännekorjausvälineellä tehdyn jännekorjauksen kestävyyttä staattisessa vetolujuustestauksessa sekä syklisessä kuormituksessa, joka simuloi staattista testausta paremmin mobilisaation toistuvaa kuormitusta. PLDLA-korjauksen vahvuus ylitti sekä staattisessa että syklisessä kuormituksessa aktiivisen mobilisaation edellyttämän vahvuuden. Nauhamaista litteää ommelmateriaalia ei aiemmin ole tutkittu tai käytetty käden koukistajajännekorjauksessa. Tässä tutkimuksessa ommelmateriaalin nauhamainen rakenne paransi merkitsevästi jännekorjauksen vahvuutta, minkä arvioidaan johtuvan lisääntyneestä kontaktipinnasta jänteen ja ommelmateriaalin välillä estäen ompeleen läpileikkautumista jänteessä. Tutkimuksessa biohajoavasta PLDLA –materiaalista valmistetulla rakenteeltaan nauhamaisella kolmisäikeisellä langalla tehdyn jännekorjauksen vahvuus saavutti aktiivisen mobilisaation edellyttämän tason. Lisäksi uusi menetelmä on helppokäyttöinen ja sillä vältetään perinteisten monisäieompeleiden tekniseen suoritukseen liittyvät ongelmat.

Diffusion of Be, Co and Mn impurities in compound semiconductors and glassy carbon studied by the modified radiotracer technique

The main method of modifying properties of semiconductors is to introduce small amount of impurities inside the material. This is used to control magnetic and optical properties of materials and to realize p- and n-type semiconductors out of intrinsic material in order to manufacture fundamental components such as diodes. As diffusion can be described as random mixing of material due to thermal movement of atoms, it is essential to know the diffusion behavior of the impurities in order to manufacture working components. In modified radiotracer technique diffusion is studied using radioactive isotopes of elements as tracers. The technique is called modified as atoms are deployed inside the material by ion beam implantation. With ion implantation, a distinct distribution of impurities can be deployed inside the sample surface with good con- trol over the amount of implanted atoms. As electromagnetic radiation and other nuclear decay products emitted by radioactive materials can be easily detected, only very low amount of impurities can be used. This makes it possible to study diffusion in pure materials without essentially modifying the initial properties by doping. In this thesis a modified radiotracer technique is used to study the diffusion of beryllium in GaN, ZnO, SiGe and glassy carbon. GaN, ZnO and SiGe are of great interest to the semiconductor industry and beryllium as a small and possibly rapid dopant hasn t been studied previously using the technique. Glassy carbon has been added to demonstrate the feasibility of the technique. In addition, the diffusion of magnetic impurities, Mn and Co, has been studied in GaAs and ZnO (respectively) with spintronic applications in mind.

Measurement of the WW+WZ production cross section using a matrix element technique in lepton+jets events

We present a measurement of the $WW+WZ$ production cross section observed in a final state consisting of an identified electron or muon, two jets, and missing transverse energy. The measurement is carried out in a data sample corresponding to up to 4.6~fb$^{-1}$ of integrated luminosity at $\sqrt{s} = 1.96$ TeV collected by the CDF II detector. Matrix element calculations are used to separate the diboson signal from the large backgrounds. The $WW+WZ$ cross section is measured to be $17.4\pm3.3$~pb, in agreement with standard model predictions. A fit to the dijet invariant mass spectrum yields a compatible cross section measurement.

Top quark mass measurement in the tt̅ all hadronic channel using a matrix element technique in pp̅ collisions at √s=1.96 TeV

We present a measurement of the top quark mass in the all-hadronic channel (\tt $\to$ \bb$q_{1}\bar{q_{2}}q_{3}\bar{q_{4}}$) using 943 pb$^{-1}$ of \ppbar collisions at $\sqrt {s} = 1.96$ TeV collected at the CDF II detector at Fermilab (CDF). We apply the standard model production and decay matrix-element (ME) to $\ttbar$ candidate events. We calculate per-event probability densities according to the ME calculation and construct template models of signal and background. The scale of the jet energy is calibrated using additional templates formed with the invariant mass of pairs of jets. These templates form an overall likelihood function that depends on the top quark mass and on the jet energy scale (JES). We estimate both by maximizing this function. Given 72 observed events, we measure a top quark mass of 171.1 $\pm$ 3.7 (stat.+JES) $\pm$ 2.1 (syst.) GeV/$c^{2}$. The combined uncertainty on the top quark mass is 4.3 GeV/$c^{2}$.