25 resultados para Industry Leader
em Helda - Digital Repository of University of Helsinki
Resumo:
The Forest devil. Businessman Erik Johan Längman (1799 1863) in the transition of economic system In Finnish historiography, Erik Johan Längman (1799-1863) bears a bad reputation of his own level: a mean, profit-seeking businessman who did not care too much about methods in his operations. Although little known, Längman has been praised as one of the pioneers of modern industry in the Grand Duchy of Finland, which belonged to the Russian Empire. From the mid 1830s Längman owned iron mill and several sawmills around the country. The growing demand of the markets in the 1830s, especially in Great Britain, marked a strong stimulus to Finnish lumber industry. At the same time claims for stricter rule over the sawmill industry were raised by high officials. The momentum of the conflict, the Forest Act of 1851, brought an end to illegal overproduction. In this biography, particular emphasis is laid on the entrepreneurial behaviour of Längman, but also on the effect the entrepreneurs had on the Crown s policies. On the other hand, how did the limitations imposed by the Crown guide the actions of the sawmill owners? The solutions adopted by the sawmill owners and the manoeuvring of the government are in a constant dialogue in this study. The Finnish sawmill industry experienced a major change in its techniques and methods of acquiring timber during the 1830s. Längman particularly, with his acquisition organisation, was able to find and reach faraway forests with unexpected results. The official regulating system with its strict producing quotas couldn t follow the changes. When the battle against the sawmill industry really started on, in 1840, it didn t happen for the benefit of iron industry, as argued previously, but to save Crown forests from depletion. After the mid 1840s Längman and the leader of the Finnish nationalistic movement, J. V. Snellman questioned the rationality of the entire regulation system and in doing so they also posed a threat against the aristocratic power. The influential but now also badly provoked chairman of the economic division of senate, Lars Gabriel von Haartman, accused the sawmill-owners harder than ever and took the advantage of the reactionary spirit of imperial Russia to launch the state forest administration. Längman circumvented the conditions of privileges, felled Crown forests illegally and accusations were brought against him for destroying his competitors. The repeated conflicts spoke primarily about a superior business idea and organisational ability. Although Längman spent his last years mostly abroad he still had interests in Finnish timber business when the liberation of sawmill-industry was established, in 1861. Surprisingly, the antagonism around the Crown forests continued, probably even more heated.
Resumo:
The purpose of this study was to extend understanding of how large firms pursuing sustained and profitable growth manage organisational renewal. A multiple-case study was conducted in 27 North American and European wood-industry companies, of which 11 were chosen for closer study. The study combined the organisational-capabilities approach to strategic management with corporate-entrepreneurship thinking. It charted the further development of an identification and classification system for capabilities comprising three dimensions: (i) the dynamism between firm-specific and industry-significant capabilities, (ii) hierarchies of capabilities and capability portfolios, and (iii) their internal structure. Capability building was analysed in the context of the organisational design, the technological systems and the type of resource-bundling process (creating new vs. entrenching existing capabilities). The thesis describes the current capability portfolios and the organisational changes in the case companies. It also clarifies the mechanisms through which companies can influence the balance between knowledge search and the efficiency of knowledge transfer and integration in their daily business activities, and consequently the diversity of their capability portfolio and the breadth and novelty of their product/service range. The largest wood-industry companies of today must develop a seemingly dual strategic focus: they have to combine leading-edge, innovative solutions with cost-efficient, large-scale production. The use of modern technology in production was no longer a primary source of competitiveness in the case companies, but rather belonged to the portfolio of basic capabilities. Knowledge and information management had become an industry imperative, on a par with cost effectiveness. Yet, during the period of this research, the case companies were better in supporting growth in volume of the existing activity than growth through new economic activities. Customer-driven, incremental innovation was preferred over firm-driven innovation through experimentation. The three main constraints on organisational renewal were the lack of slack resources, the aim for lean, centralised designs, and the inward-bound communication climate.
Resumo:
The basis for this study was in poor attractiveness of the wood products industry among young people as a field to study and work in. The purpose was to produce new information of how to improve the relationship between young people and the wood products industry in order to better attract young people with different relational orientation. A survey was conducted among students of comprehensive schools and students of wood industry at vocational schools selected by systematic cluster sampling. The final sample consisted of 613 students. The study combined the theories and concepts of relationships, communication and trust of several disciplines. In addition, it applied theories of relationship marketing, stakeholders, publics, involvement and concepts of reputation and values. It studied the central relational elements in the form of antecedents, relationship state and its consequences. The study examined, how young people with different background and level of interest perceive wood industry as a field to study and work in from relational point of view, what are the central deficiencies in perceived relational elements and what are the public relations activities enhancing the relationship between wood industry and young people with less and high interest in the sector. The results indicate poor visibility of the wood industry among young people: unfamiliarity with the industry and unawareness of the opportunities to study in the field. It appeared that instead of increasing only information sharing, interactive communication in different forms is needed. The study also suggests that behaviors of the industry sector advancing perceived trustworthiness are of crucial importance. Moreover, the wood industry needs to pay attention to its behaviors and communication also among other stakeholder groups, especially the media, as reputation plays an important role in building up trust and satisfaction between young people and the sector. Finally, the less and highly interested young people were found to assess the relationship partly through different relational elements. In order to develop the relationship with highly interested young people they should be regarded clearly as future employees of the wood industry through activities affirming that they are desired and valued employees in the sector. Further, openness of information disclosure, whether concerning current situation or future prospects, seems to increase credibility and attractiveness of the wood industry. Highly interested young people were also found to appreciate socially responsible activities. The less interested young people seem to be insecure about the reliability of the wood industry as an employer, as well as, its ability and interest to invest in young people s skills. In addition,involvement in issues relevant for young people was found crucial in enhancing the relationship with the less interested young people.The conclusions of the study provide tools for enhancing the attractiveness of the wood industry among young people not only to the industry itself, but also to its advocates, teachers and student counselors of comprehensive and vocational schools, authorities and policy makers.
Resumo:
In order to fully understand the process of European integration it is of paramount importance to consider developments at the sub-national and local level. EU integration scholars shifted their attention to the local level only at the beginning of the 1990s with the concept of multi-level governance (MLG). While MLG is the first concept to scrutinise the position of local levels of public administration and other actors within the EU polity, I perceive it as too optimistic in the degree of influence it ascribes to local levels. Thus, learning from and combining MLG with other concepts, such as structural constructivism, helps to reveal some of the hidden aspects of EU integration and paint a more realistic picture of multi-level interaction. This thesis also answers the call for more case studies in order to conceptualise MLG further. After a critical study of theories and concepts of European integration, above all, MLG, I will analyse sub-national and local government in Finland and Germany. I show how the sub-national level and local governments are embedded in the EU s multi-level structure of governance and how, through EU integration, those levels have been empowered but also how their scope of action has partially decreased. After theoretical and institutional contextualisation, I present the results of my empirical study of the EU s Community Initiative LEADER+. LEADER stands for Liaison Entre Actions de Développement de l'Économie Rurale , and aims at improving the economic conditions in Europe s rural areas. I was interested in how different actors construct and shape EU financed rural development, especially in how local actors organised in so-called local action groups (LAGs) cooperate with other administrative units within the LEADER+ administrative chain. I also examined intra-institutional relations within those groups, in order to find out who are the most influential and powerful actors within them. Empirical data on the Finnish and German LAGs was first gathered through a survey, which was then supplemented and completed by interviewing LAG members, LAG-managers, several civil servants from Finnish and German decision-making and managing authorities and a civil servant from the EU Commission. My main argument is that in both Germany and Finland, the Community Initiative LEADER+ offered a space for multi-level interaction and local-level involvement, a space that on the one hand consists of highly motivated people actively contributing to the improvement of the quality of life and economy in Europe s countryside but which is dependent and also restricted by national administrative practices, implementation approaches and cultures on the other. In Finland, the principle of tri-partition (kolmikantaperiaatte) in organising the executive committees of LAGs is very noticeable. In comparison to Germany, for instance, the representation of public administration in those committees is much more limited due to this principle. Furthermore, the mobilisation of local residents and the bringing together of actors from the local area with different social and institutional backgrounds to become an active part of LEADER+ was more successful in Finland than in Germany. Tri-partition as applied in Finland should serve as a model for similar policies in other EU member states. EU integration changed the formal and informal inter-institutional relations linking the different levels of government. The third sector including non-governmental institutions and interest groups gained access to policy-making processes and increasingly interact with government institutions at all levels of public administration. These developments do not necessarily result in the empowering of the local level.
Resumo:
Three strategically important uses of IT in the construction industry are the storage and management of project documents on webservers (EDM), the electronic handling of orders and invoices between companies (EDI) and the use of 3-D models including non-geometrical attributes for integrated design and construction (BIM). In a broad longitudinal survey study of IT use in the Swedish Construction Industry the extent of use of these techniques was measured in 1998, 2000 and 2007. The results showed that EDM and EDI are currently already well-established techniques whereas BIM, although it promises the biggest potential benefits to the industry, only seems to be at the beginning of adoption. In a follow-up to the quantitative studies, the factors affecting the decisions to implement EDM, EDI and BIM as well as the actual adoption processes, were studied using semi-structured interviews with practitioners. The theoretical basis for the interview studies was informed by theoretical frameworks from IT-adoption theory, where in particular the UTAUT model has provided the main basis for the analyses presented here. The results showed that the decisions to take the above technologies into use are made on three differ- ent levels: the individual level, the organizational level in the form of a company, and the organiza- tional level in the form of a project. The different patterns in adoption can to some part be explained by where the decisions are mainly taken. EDM is driven from the organisation/project level, EDI mainly from the organisation/company level, and BIM is driven by individuals pioneering the technique.
Resumo:
The goal of the single building information model has existed for at least thirty years and various standards have been published leading up to the ten-year development of the Industry Foundation Classes. These have been initiatives from researchers, software developers and standards committees. Now large property owners are becoming aware of the benefits of moving IT tools from specific applications towards more comprehensive solutions. This study addresses the state of Building Information Models and the conditions necessary for them to become more widely used. It is a qualitative study based on information from a number of international experts and has asked a series of questions about the feasibility of BIMs, the conditions necessary for their success, and the role of standards with particular reference to the IFCs. Some key statements were distilled from the diverse answers received and indicate that BIM solutions appear too complex for many and may need to be applied in limited areas initially. Standards are generally supported but not applied rigorously and a range of these are relevant to BIM. Benefits will depend upon the building procurement methods used and there should be special roles within the project team to manage information. Case studies are starting to appear and these could be used for publicity. The IFCs are rather oversold and their complexities should be hidden within simple-to-use software. Inevitably major questions remain and property owners may be the key to answering some of these. A framework for presenting standards, backed up by case studies of successful projects, is the solution proposed to provide better information on where particular BIM standards and solutions should be applied in building projects.
Resumo:
Triggered by the very quick proliferation of Internet connectivity, electronic document management (EDM) systems are now rapidly being adopted for managing the documentation that is produced and exchanged in construction projects. Nevertheless there are still substantial barriers to the efficient use of such systems, mainly of a psychological nature and related to insufficient training. This paper presents the results of empirical studies carried out during 2002 concerning the current usage of EDM systems in the Finnish construction industry. The studies employed three different methods in order to provide a multifaceted view of the problem area, both on the industry and individual project level. In order to provide an accurate measurement of overall usage volume in the industry as a whole telephone interviews with key personnel from 100 randomly chosen construction projects were conducted. The interviews showed that while around 1/3 of big projects already have adopted the use of EDM, very few small projects have adopted this technology. The barriers to introduction were investigated through interviews with representatives for half a dozen of providers of systems and ASP-services. These interviews shed a lot of light on the dynamics of the market for this type of services and illustrated the diversity of business strategies adopted by vendors. In the final study log files from a project which had used an EDM system were analysed in order to determine usage patterns. The results illustrated that use is yet incomplete in coverage and that only a part of the individuals involved in the project used the system efficiently, either as information producers or consumers. The study also provided feedback on the usefulness of the log files.
Resumo:
The successful interaction between leaders and their followers is central to the overall functioning of a company. The increasingly multinational nature of modern business and the resulting multicultural and increasingly heterogeneous workforce imposes specific challenges to the development of high-quality work relationships. The Western multinational companies that have started operations in China are facing these challenges. This study examines the quality of leader-follower relationships between Western expatriate leaders and their Chinese followers as well as between Chinese leaders and their Chinese followers in Western-owned subsidiaries in China. The focus is on the influence of personal, interpersonal and behavioural factors (personality, values, cultural knowledge, perceived and actual similarity, interactional justice, and follower performance) and the work-related implications of these relationships (job attitudes and organisational citizenship behaviour). One interesting finding of this study is that Chinese followers have higher perceptions of their Western than their Chinese leaders. The results also indicate that Chinese and Western leaders’ perceptions of their followers are not influenced favourably by the same follower characteristics. In a similar vein, Chinese followers value different traits in Western versus Chinese leaders. These results, as well as the numerous more specific findings of the study, have practical implications for international human resource management and areas such as selection, placement and training. Due to the different effect of personal and interpersonal factors across groups, it is difficult to achieve the “perfect match” between leader and follower characteristics that simultaneously contribute to high-quality relationships for Chinese and Western leaders as well as for followers. However, the results indicate that the ability of organisations to enhance the quality of leader-follower relations by selecting and matching people with suitable characteristics may provide an effective means for organisations to increase positive job attitudes and hence influence work-related outcomes.
Resumo:
The aim of the study was to explore the importance of evaluating leadership criteria in Finland at leader/subordinate levels of the insurance industry. The overall purpose of the thesis is tackled and analyzed from two different perspectives: - by examining the importance of the leadership criteria and style of Finnish insurance business leaders and their subordinates - by examining the opinions of insurance business leaders regarding leadership criteria in two culturally different countries: the US and Finland. This thesis consists of three published articles that scrutinise the focal phenomena both theoretically and empirically. The main results of the study do not lend support to the existence of a universal model of leadership criteria in the insurance business. As a matter of fact, the possible model seems to be based more on the special organizational and cultural circumstances of the country in question. The leadership criteria seem to be quite stable irrespective of the comparatively short research time period (3–5 years) and hierarchical level (subordinate/leader). Leaders have major difficulties in changing their leadership style. In fact, in order to bring about an efficient organizational change in the company you have to alternate the leader. The cultural dimensions (cooperation and monitoring) identified by Finnish subordinates were mostly in line with those of their managers, whilst emphasizing more the aspect of monitoring employees, which could be seen from their point of view as another element of managers’ optimizing/efficiency requirements. In Finnish surveys the strong emphasis on cooperation and mutual trust become apparent by both subordinates and managers. The basic problem is still how to emphasize and balance them in real life in such a way that both parties are happy to work together on a common basis. The American surveys suggests hypothetically that in a soft market period (buyer’s market) managers employ a more relationship-oriented leadership style and correspondingly adapt their leadership style to a more task-oriented approach in a hard market phase (seller’s market). In making business better Finnish insurance managers could probably concentrate more on task-oriented items such as reviewing, budgeting, monitoring and goal-orientation. The study also suggests that the social safety net of the European welfare state ideology has so far shielded the culture-specific sense of social responsibility of Finnish managers from the hazards of free competition and globalization.
Resumo:
Researchers within the fields of economic geography and organizational management have extensively studied learning and the prerequisites and impediments for knowledge transfer. This paper combines two discourses within the two subjects: the-communities-of-practice and the learning region approaches, merging them through the so-called ecology of knowledge-approach, which is used to examine the knowledge transfer from the House of Fabergé to the Finnish jewellery industry. We examine the pre-revolution St Petersburg jewellery cluster and the post-revolution Helsinki, and the transfer of knowledge between these two locations through the components of communities of people, institutions and industry. The paper shows that the industrial dynamics of the Finnish modern-day goldsmith industry was inherently shaped both through the transfer and the non-transfer of knowledge. It also contends that the “knowledge-economy” is not anchored in and exclusive for the high technology sector of the late 20th century.