Poverty and the Environment : Investment Poverty and the Role of Assets in Generating Welfare for Farmer Households in the Province of Herrera, Panama

Köyhiä maanviljelijöitä on usein syytetty kehitysmaiden ympäristöongelmista. On väitetty, että eloonjäämistaistelu pakottaa heidät käyttämään maata ja muita luonnonvaroja lyhytnäköisesti. Harva asiaa koskeva tutkimus on kuitenkaan tukenut tätä väitettä; perheiden köyhyyden astetta ja heidän aiheuttamaansa ympäristövaikutusta ei ole kyetty kytkemään toisiinsa. Selkeyttääkseen köyhyys-ympäristö –keskustelua, Thomas Reardon ja Steven Vosti kehittivät investointiköyhyyden käsitteen. Se tunnistaa sen kenties suuren joukon maanviljelijäperheitä, jotka eivät ole köyhiä perinteisten köyhyysmittareiden mukaan, mutta joiden hyvinvointi ei ole riittävästi köyhyysrajojen yläpuolella salliakseen perheen investoida kestävämpään maankäyttöön. Reardon ja Vosti korostivat myös omaisuuden vaikutusta perheiden hyvinvointiin, ja uskoivat sen vaikuttavan tuotanto- ja investointipäätöksiin. Tässä tutkimuksessa pyritään vastaamaan kahteen kysymykseen: Miten investointiköyhyyttä voidaan ymmärtää ja mitata? Ja, mikä on viljelijäperheiden omaisuuden hyvinvointia lisäävä vaikutus? Tätä tutkimusta varten haastateltiin 402 maanviljelijäperhettä Väli-Amerikassa, Panaman tasavallan Herreran läänissä. Näiden perheiden hyvinvointia mitattiin heidän kulutuksensa mukaan, ja paikalliset köyhyysrajat laskettiin paikallisen ruoan hinnan mukaan. Herrerassa ihminen tarvitsee keskimäärin 494 dollaria vuodessa saadakseen riittävän ravinnon, tai 876 dollaria vuodessa voidakseen ravinnon lisäksi kattaa muitakin välttämättömiä menoja. Ruoka- eli äärimmäisen köyhyyden rajan alle jäi 15,4% tutkituista perheistä, ja 33,6% oli jokseenkin köyhiä, eli saavutti kyllä riittävän ravitsemuksen, muttei kyennyt kustantamaan muita perustarpeitaan. Molempien köyhyysrajojen yläpuolelle ylsi siis 51% tutkituista perheistä. Näiden köyhyysryhmien välillä on merkittäviä eroavaisuuksia ei vain perheiden varallisuuden, tulojen ja investointistrategioiden välillä, mutta myös perheiden rakenteessa, elinympäristössä ja mahdollisuuksissa saada palveluja. Investointiköyhyyden mittaaminen osoittautui haastavaksi. Herrerassa viljelijät eivät tee investointeja puhtaasti ympäristönsuojeluun, eikä maankäytön kestävyyttä muutenkaan pystytty yhdistämään perheiden hyvinvoinnin tasoon. Siksi investointiköyhyyttä etsittiin sellaisena hyvinvoinnin tasona, jonka alapuolella elävien perheiden parissa tuottavat maanparannusinvestoinnit eivät enää ole suorassa suhteessa hyvinvointiin. Tällaisia investointeja ovat mm. istutetut aidat, lannoitus ja paranneltujen laiduntyyppien viljely. Havaittiin, että jos perheen hyvinvointi putoaa alle 1000 dollarin/henkilö/vuosi, tällaiset tuottavat maanparannusinvestoinnit muuttuvat erittäin harvinaisiksi. Investointiköyhyyden raja on siis noin kaksi kertaa riittävän ravitsemuksen hinta, ja sen ylitti 42,3% tutkituista perheistä. Heille on tyypillistä, että molemmat puolisot käyvät työssä, ovat korkeasti koulutettuja ja yhteisössään aktiivisia, maatila tuottaa paremmin, tilalla kasvatetaan vaativampia kasveja, ja että he ovat kerryttäneet enemmän omaisuutta kuin investointi-köyhyyden rajan alla elävät perheet. Tässä tutkimuksessa kyseenalaistettiin yleinen oletus, että omaisuudesta olisi poikkeuksetta hyötyä viljelijäperheelle. Niinpä omaisuuden vaikutusta perheiden hyvinvointiin tutkittiin selvittämällä, mitä reittejä pitkin perheiden omistama maa, karja, koulutus ja työikäiset perheenjäsenet voisivat lisätä perheen hyvinvointia. Näiden hyvinvointi-mekanismien ajateltiin myös riippuvan monista väliin tulevista tekijöistä. Esimerkiksi koulutus voisi lisätä hyvinvointia, jos sen avulla saataisiin paremmin palkattuja töitä tai perustettaisiin yritys; mutta näihin mekanismeihin saattaa vaikuttaa vaikkapa etäisyys kaupungeista tai se, omistaako perhe ajoneuvon. Köyhimpien perheiden parissa nimenomaan koulutus olikin ainoa tutkittu omaisuuden muoto, joka edisti perheen hyvinvointia, kun taas maasta, karjasta tai työvoimasta ei ollut apua köyhyydestä nousemiseen. Varakkaampien perheiden parissa sen sijaan korkeampaa hyvinvointia tuottivat koulutuksen lisäksi myös maa ja työvoima, joskin monesta väliin tulevasta muuttujasta, kuten tuotantopanoksista riippuen. Ei siis ole automaatiota, jolla omaisuus parantaisi perheiden hyvinvointia. Vaikka rikkailla onkin yleensä enemmän karjaa kuin köyhemmillä, ei tässä aineistossa löydetty yhtään mekanismia, jota kautta karjan määrä tuottaisi korkeampaa hyvinvointia viljelijäperheille. Omaisuuden keräämisen ja hyödyntämisen strategiat myös muuttuvat hyvinvoinnin kasvaessa ja niihin vaikuttavat monet ulkoiset tekijät. Ympäristön ja köyhyyden suhde on siis edelleen epäselvä. Köyhyyden voittaminen vaatii pitkällä tähtäimellä sitä, että viljelijäperheet nousisivat investointiköyhyyden rajan yläpuolelle. Näin heillä olisi varaa alkaa kartuttaa omaisuutta ja investoida kestävämpään maankäyttöön. Tällä hetkellä kuitenkin isolle osalle herreralaisia perheitä tuo raja on kaukana tavoittamattomissa. Miten päästä yli tuhannen dollarin kulutukseen perheenjäsentä kohden, mikäli elintaso ei yllä edes riittävään ravitsemukseen? Ja sittenkin, vaikka hyvinvointi kohenisi, ei ympäristön kannalta parannuksia ole välttämättä odotettavissa, mikäli karjalaumat kasvavat ja eroosioalttiit laitumet leviävät.

Syntheses and Self-Assembling Characteristics of Amphiphilic Star Diblock Copolymers

Uusien polymeeripohjaisten teknologioiden ja materiaalien myötä räätälöityjen polymeerien tarve on kasvanut. Viime vuosituhannen lopussa kehitetyt kontrolloidut polymerointimenetelmät ovat avanneet uusia mahdollisuuksia paitsi monimutkaisten polymeerien synteesiin, myös itsejärjestyvyyteen perustuvien funktionaalisten nanorakenteiden suunnitteluun ja valmistukseen. Nämä voivat jäljitellä luonnossa esiintyviä rakenteita, joita muodostavat esimerkiksi lipidit ja proteiinit. Itsejärjestyvät molekyylit ovat usein amfifiilisiä eli ne koostuvat hydrofiilisistä ja hydrofobisista osista ja polymeereissä nämä osat voivat olla omina lohkoinaan, jolloin puhutaan amfifiilisistä lohko- tai blokkikopolymeereistä. Riippuen järjestyneiden rakenteiden koostumuksesta ja muodosta, amfifiilisiä blokkikopolymeerejä on tutkittu tai jo käytetty nanoteknologiassa, elastomeereissä, voiteluaineissa, pinta-aktiivisina aineina, lääkkeenannostelussa, maaleissa, sekä elektroniikka-, kosmetiikka- ja elintarviketeollisuudessa. Tavallisimmin käytetyt amfifiiliset blokkikopolymeerit ovat olleet lineaarisia, mutta viime aikoina tutkimus on suuntautunut kohti monimutkaisempia rakenteita. Tällaisia ovat esimerkiksi tähtipolymeerit. Tähtimäisissä polymeereissä miselleille tyypillinen ydin-kuori-rakenne säilyy hyvin alhaisissakin polymeerikonsentraatioissa, koska polymeeriketjut ovat kiinni toisissaan yhdessä pisteessä. Siten ne ovat erityisen kiinnostavia tutkimuskohteita erilaisten hydrofobisten orgaanisten yhdisteiden sitomiseksi ja vapauttamiseksi. Tässä työssä on tarkasteltu amfifiilisten tähtipolymeerien itsejärjestymistä vesiliuoksissa sekä kokeellisesti ja tietokonesimulaatioin. Työ koostuu kahdesta osasta: tähtipolymeerien synteesistä makrosyklisillä initiaattoreilla ja amfifiilisten tähtimäisten blokkikopolymeerien ominaisuuksien tutkimisesta.

Endoplasmic reticulum stress and cell death mechanisms in the cell model of Huntington’s disease

This thesis clarifies important molecular pathways that are activated during the cell death observed in Huntington’s disease. Huntington’s disease is one of the most common inherited neurodegenerative diseases, which is primarily inherited in an autosomal dominant manner. HD is caused by an expansion of CAG repeats in the first exon of the IT15 gene. IT15 encodes the production of a Huntington’s disease protein huntingtin. Mutation of the IT15 gene results in a long stretch of polyQ residues close to the amino-terminal region of huntingtin. Huntington’s disease is a fatal autosomal neurodegenerative disorder. Despite the current knowledge of HD, the precise mechanism behind the selective neuronal death, and how the disease propagates, still remains an enigma. The studies mainly focused on the control of endoplasmic reticulum (ER) stress triggered by the mutant huntingtin proteins. The ER is a delicate organelle having essential roles in protein folding and calcium regulation. Even the slightest perturbations on ER homeostasis are effective enough to trigger ER stress and its adaptation pathways, called unfolded protein response (UPR). UPR is essential for cellular homeostasis and it adapts ER to the changing environment and decreases ER stress. If adaptation processes fail and stress is excessive and prolonged; irreversible cell death pathways are engaged. The results showed that inhibition of ER stress with chemical agents are able to decrease cell death and formation of toxic cell aggregates caused by mutant huntingtin proteins. The study concentrated also to the NF-κB (nuclear factor-kappaB) pathway, which is activated during ER stress. NF-κB pathway is capable to regulate the levels of important cellular antioxidants. Cellular antioxidants provide a first line of defence against excess reactive oxygen species. Excess accumulation of reactive oxygen species and subsequent activation of oxidative stress damages motley of vital cellular processes and induce cell degeneration. Data showed that mutant huntingtin proteins downregulate the expression levels of NF-κB and vital antioxidants, which was followed by increased oxidative stress and cell death. Treatment with antioxidants and inhibition of oxidative stress were able to counteract these adverse effects. In addition, thesis connects ER stress caused by mutant huntingtin to the cytoprotective autophagy. Autophagy sustains cellular balance by degrading potentially toxic cell proteins and components observed in Huntington’s disease. The results revealed that cytoprotective autophagy is active at the early points (24h) of ER stress after expression of mutant huntingtin proteins. GADD34 (growth arrest and DNA damage-inducible gene 34), which is previously connected to the regulation of translation during cell stress, was shown to control the stimulation of autophagy. However, GADD34 and autophagy were downregulated at later time points (48h) during mutant huntingtin proteins induced ER stress, and subsequently cell survival decreased. Overexpression GADD34 enhanced autophagy and decreased cell death, indicating that GADD34 plays a critical role in cell protection. The thesis reveales new interesting data about the neuronal cell death pathways seen in Huntington’s disease, and how cell degeneration is partly counteracted by various therapeutic agents. Expression of mutant huntingtin proteins is shown to alter signaling events that control ER stress, oxidative stress and autophagy. Despite that Huntington’s disease is mainly an untreatable disorder; these findings offer potential targets and neuroprotective strategies in designing novel therapies for Huntington’s disease.

Road Dust from Pavement Wear and Traction Sanding

Vehicles affect the concentrations of ambient airborne particles through exhaust emissions, but particles are also formed in the mechanical processes in the tire-road interface, brakes, and engine. Particles deposited on or in the vicinity of the road may be re-entrained, or resuspended, into air through vehicle-induced turbulence and shearing stress of the tires. A commonly used term for these particles is road dust . The processes affecting road dust emissions are complex and currently not well known. Road dust has been acknowledged as a dominant source of PM10 especially during spring in the sub-arctic urban areas, e.g. in Scandinavia, Finland, North America and Japan. The high proportion of road dust in sub-arctic regions of the world has been linked to the snowy winter conditions that make it necessary to use traction control methods. Traction control methods include dispersion of traction sand, melting of ice with brine solutions, and equipping the tires with either metal studs (studded winter tires), snow chains, or special tire design (friction tires). Several of these methods enhance the formation of mineral particles from pavement wear and/or from traction sand that accumulate in the road environment during winter. When snow and ice melt and surfaces dry out, traffic-induced turbulence makes some of the particles airborne. A general aim of this study was to study processes and factors underlying and affecting the formation and emissions of road dust from paved road surfaces. Special emphasis was placed on studying particle formation and sources during tire road interaction, especially when different applications of traction control, namely traction sanding and/or winter tires were in use. Respirable particles with aerodynamic diameter below 10 micrometers (PM10) have been the main concern, but other size ranges and particle size distributions were also studied. The following specific research questions were addressed: i) How do traction sanding and physical properties of the traction sand aggregate affect formation of road dust? ii) How do studded tires affect the formation of road dust when compared with friction tires? iii) What are the composition and sources of airborne road dust in a road simulator and during a springtime road dust episode in Finland? iv) What is the size distribution of abrasion particles from tire-road interaction? The studies were conducted both in a road simulator and in field conditions. The test results from the road simulator showed that traction sanding increased road dust emissions, and that the effect became more dominant with increasing sand load. A high percentage of fine-grained anti-skid aggregate of overall grading increased the PM10 concentrations. Anti-skid aggregate with poor resistance to fragmentation resulted in higher PM levels compared with the other aggregates, and the effect became more significant with higher aggregate loads. Glaciofluvial aggregates tended to cause higher particle concentrations than crushed rocks with good fragmentation resistance. Comparison of tire types showed that studded tires result in higher formation of PM emissions compared with friction tires. The same trend between the tires was present in the tests with and without anti-skid aggregate. This finding applies to test conditions of the road simulator with negligible resuspension. Source and composition analysis showed that the particles in the road simulator were mainly minerals and originated from both traction sand and pavement aggregates. A clear contribution of particles from anti-skid aggregate to ambient PM and dust deposition was also observed in urban conditions. The road simulator results showed that the interaction between tires, anti-skid aggregate and road surface is important in dust production and the relative contributions of these sources depend on their properties. Traction sand grains are fragmented into smaller particles under the tires, but they also wear the pavement aggregate. Therefore particles from both aggregates are observed. The mass size distribution of traction sand and pavement wear particles was mainly coarse, but fine and submicron particles were also present.

The role of cyclase-associated protein (CAP) in actin dynamics during cell motility and morphogenesis

The highly dynamic remodeling of the actin cytoskeleton is responsible for most motile and morphogenetic processes in all eukaryotic cells. In order to generate appropriate spatial and temporal movements, the actin dynamics must be under tight control of an array of actin binding proteins (ABPs). Many proteins have been shown to play a specific role in actin filament growth or disassembly of older filaments. Very little is known about the proteins affecting recycling i.e. the step where newly depolymerized actin monomers are funneled into new rounds of filament assembly. A central protein family involved in the regulation of actin turnover is cyclase-associated proteins (CAP, called Srv2 in budding yeast). This 50-60 kDa protein was first identified from yeast as a suppressor of an activated RAS-allele and a factor associated with adenylyl cyclase. The CAP proteins harbor N-terminal coiled-coil (cc) domain, originally identified as a site for adenylyl cyclase binding. In the N-terminal half is also a 14-3-3 like domain, which is followed by central proline-rich domains and the WH2 domain. In the C-terminal end locates the highly conserved ADP-G-actin binding domain. In this study, we identified two previously suggested but poorly characterized interaction partners for Srv2/CAP: profilin and ADF/cofilin. Profilins are small proteins (12-16 kDa) that bind ATP-actin monomers and promote the nucleotide exchange of actin. The profilin-ATP-actin complex can be directly targeted to the growth of the filament barbed ends capped by Ena/VASP or formins. ADF/cofilins are also small (13-19 kDa) and highly conserved actin binding proteins. They depolymerize ADP-actin monomers from filament pointed ends and remain bound to ADP-actin strongly inhibiting nucleotide exchange. We revealed that the ADP-actin-cofilin complex is able to directly interact with the 14-3-3 like domain at the N-terminal region of Srv2/CAP. The C-terminal high affinity ADP-actin binding site of Srv2/CAP competes with cofilin for an actin monomer. Cofilin can thus be released from Srv2/CAP for the subsequent round of depolymerization. We also revealed that profilin interacts with the first proline-rich region of Srv2/CAP and that the binding occurs simultaneously with ADP-actin binding to C-terminal domain of Srv2/CAP. Both profilin and Srv2/CAP can promote nucleotide exchange of actin monomer. Because profilin has much higher affinity to ATP-actin than Srv2/CAP, the ATP-actin-profilin complex is released for filament polymerization. While a disruption of cofilin binding in yeast Srv2/CAP produces a severe phenotype comparable to Srv2/CAP deletion, an impairment of profilin binding from Srv2/CAP results in much milder phenotype. This suggests that the interaction with cofilin is essential for the function of Srv2/CAP, whereas profilin can also promote its function without direct interaction with Srv2/CAP. We also show that two CAP isoforms with specific expression patterns are present in mice. CAP1 is the major isoform in most tissues, while CAP2 is predominantly expressed in muscles. Deletion of CAP1 from non-muscle cells results in severe actin phenotype accompanied with mislocalization of cofilin to cytoplasmic aggregates. Together these studies suggest that Srv2/CAP recycles actin monomers from cofilin to profilin and thus it plays a central role in actin dynamics in both yeast and mammalian cells.

Interactions and turnover of the muscular dystrophy protein myotilin

The striated muscle sarcomere is a force generating and transducing unit as well as an important sensor of extracellular cues and a coordinator of cellular signals. The borders of individual sarcomeres are formed by the Z-disks. The Z-disk component myotilin interacts with Z-disk core structural proteins and with regulators of signaling cascades. Missense mutations in the gene encoding myotilin cause dominantly inherited muscle disorders, myotilinopathies, by an unknown mechanism. In this thesis the functions of myotilin were further characterized to clarify the molecular biological basis and the pathogenetic mechanisms of inherited muscle disorders, mainly caused by mutated myotilin. Myotilin has an important function in the assembly and maintenance of the Z-disks probably through its actin-organizing properties. Our results show that the Ig-domains of myotilin are needed for both binding and bundling actin and define the Ig domains as actin-binding modules. The disease-causing mutations appear not to change the interplay between actin and myotilin. Interactions between Z-disk proteins regulate muscle functions and disruption of these interactions results in muscle disorders. Mutations in Z-disk components myotilin, ZASP/Cypher and FATZ-2 (calsarcin-1/myozenin-2) are associated with myopathies. We showed that proteins from the myotilin and FATZ families interact via a novel and unique type of class III PDZ binding motif with the PDZ domains of ZASP and other Enigma family members and that the interactions can be modulated by phosphorylation. The morphological findings typical of myotilinopathies include Z-disk alterations and aggregation of dense filamentous material. The causes and mechanisms of protein aggregation in myotilinopathy patients are unknown, but impaired degradation might explain in part the abnormal protein accumulation. We showed that myotilin is degraded by the calcium-dependent, non-lysosomal cysteine protease calpain and by the proteasome pathway, and that wild type and mutant myotilin differ in their sensitivity to degradation. These studies identify the first functional difference between mutated and wild type myotilin. Furthermore, if degradation of myotilin is disturbed, it accumulates in cells in a manner resembling that seen in myotilinopathy patients. Based on the results, we propose a model where mutant myotilin escapes proteolytic breakdown and forms protein aggregates, leading to disruption of myofibrils and muscular dystrophy. In conclusion, the main results of this study demonstrate that myotilin is a Z-disk structural protein interacting with several Z-disk components. The turnover of myotilin is regulated by calpain and the ubiquitin proteasome system and mutations in myotilin seem to affect the degradation of myotilin, leading to protein accumulations in cells. These findings are important for understanding myotilin-linked muscle diseases and designing treatments for these disorders.

Growth and Modification of Cluster-Assembled Thin Films

Thin film applications have become increasingly important in our search for multifunctional and economically viable technological solutions of the future. Thin film coatings can be used for a multitude of purposes, ranging from a basic enhancement of aesthetic attributes to the addition of a complex surface functionality. Anything from electronic or optical properties, to an increased catalytic or biological activity, can be added or enhanced by the deposition of a thin film, with a thickness of only a few atomic layers at the best, on an already existing surface. Thin films offer both a means of saving in materials and the possibility for improving properties without a critical enlargement of devices. Nanocluster deposition is a promising new method for the growth of structured thin films. Nanoclusters are small aggregates of atoms or molecules, ranging in sizes from only a few nanometers up to several hundreds of nanometers in diameter. Due to their large surface to volume ratio, and the confinement of atoms and electrons in all three dimensions, nanoclusters exhibit a wide variety of exotic properties that differ notably from those of both single atoms and bulk materials. Nanoclusters are a completely new type of building block for thin film deposition. As preformed entities, clusters provide a new means of tailoring the properties of thin films before their growth, simply by changing the size or composition of the clusters that are to be deposited. Contrary to contemporary methods of thin film growth, which mainly rely on the deposition of single atoms, cluster deposition also allows for a more precise assembly of thin films, as the configuration of single atoms with respect to each other is already predetermined in clusters. Nanocluster deposition offers a possibility for the coating of virtually any material with a nanostructured thin film, and therein the enhancement of already existing physical or chemical properties, or the addition of some exciting new feature. A clearer understanding of cluster-surface interactions, and the growth of thin films by cluster deposition, must, however, be achieved, if clusters are to be successfully used in thin film technologies. Using a combination of experimental techniques and molecular dynamics simulations, both the deposition of nanoclusters, and the growth and modification of cluster-assembled thin films, are studied in this thesis. Emphasis is laid on an understanding of the interaction between metal clusters and surfaces, and therein the behaviour of these clusters during deposition and thin film growth. The behaviour of single metal clusters, as they impact on clean metal surfaces, is analysed in detail, from which it is shown that there exists a cluster size and deposition energy dependent limit, below which epitaxial alignment occurs. If larger clusters are deposited at low energies, or cluster-surface interactions are weaker, non-epitaxial deposition will take place, resulting in the formation of nanocrystalline structures. The effect of cluster size and deposition energy on the morphology of cluster-assembled thin films is also determined, from which it is shown that nanocrystalline cluster-assembled films will be porous. Modification of these thin films, with the purpose of enhancing their mechanical properties and durability, without destroying their nanostructure, is presented. Irradiation with heavy ions is introduced as a feasible method for increasing the density, and therein the mechanical stability, of cluster-assembled thin films, without critically destroying their nanocrystalline properties. The results of this thesis demonstrate that nanocluster deposition is a suitable technique for the growth of nanostructured thin films. The interactions between nanoclusters and their supporting surfaces must, however, be carefully considered, if a controlled growth of cluster-assembled thin films, with precisely tailored properties, is to be achieved.

Macrophages in regressed and progressed uveal melanoma

Uveal melanoma (UM) is the most common primary ocular malignancy in adults. In Finland, approximately 50 new cases are diagnosed yearly. Up to 50% of UM metastasize, mostly to the liver, although other organs are also affected. Despite improvements in the management of the primary tumour, the survival rates of patients with metastatic UM are poor. Until the 1970s, UMs were treated by enucleation i.e. removal of the eye. Currently, UM is usually treated by brachytherapy, which is known to influence tumour cells and blood vessels. UMs enucleated both primarily and secondarily after brachytherapy contain tumour-infiltrating macrophages, and a high number of macrophages in primary UM is associated with a shorter survival and a higher microvascular density (MVD) within the tumour tissue. The latter is independently associated with a shorter time to metastatic death. Macrophages have several diverse roles depending on their response to variable signals from the surrounding microenvironment. They function as scavengers, as producers of angiogenic and growth factors as well as proteases, which modulate extracellular matrix. Thus, tumour invasiveness and the risk for metastasis increase with increasing macrophage density. The aim of this study was to evaluate the effects of regression and progression of UM on macrophage numbers and microcirculation factors. Tumour regression is induced by primary brachytherapy, and tumour progression is evidenced by the development of metastases. Understanding the biological behaviour of UMs in the both states may help us in finding new treatment modalities against this disease. To achieve these aims case-control analyses of irradiated UMs and primarily-enucleated eyes (34 matched pairs) were performed. UMs were stained immunohistochemically to detect macrophages, extravascular matrix (EVM) loops and networks, and MVD. Following brachytherapy, a lower MVD was observed. The average number of macrophages remained unchanged. Considering that irradiated melanomas may still contain proliferating tumour cells, a clinically-relevant consequence of my study would be the reassurance that the risk for metastasis is likely to be reduced, given that the low MVD in untreated UMs indicates a favourable prognosis. The effect of progression on macrophages was studied in a paired analysis of primarily-enucleated UM and their corresponding hepatic metastases (48 pairs). A cross-sectional histopathological analysis of these pairs was carried out by staining both specimens in a similar way to the first study. MVD was greater in hepatic metastases than in corresponding primary tumours, and the survival of the patient tended to be shorter if hepatic metastases had a higher MVD. Hepatic metastases had also more dendritic macrophages than the primary UMs. Thus, the progression to metastasis seems to alter the inflammatory status within the tumour. Furthermore, determining MVD of biopsied hepatic metastases may serve as a supplementary tool in estimating the prognosis of patients with metastatic uveal melanoma. After irradiation, the majority of treated eyes have been clinically observed to have pigmented episcleral deposits. A noncomparative clinical case series of 211 irradiated UM eyes were studied by recording the number and location of pigmented episcleral deposits during follow-up visits after brachytherapy. For the first time, the study described pigmented episcleral deposits, which are found in the most UM eyes after brachytherapy, and proved them to consist of macrophages full with engulfed melanin particles. This knowledge may save patients from unnecessary enucleation, because episcleral pigmented deposits might be mistaken for extrascleral tumour growth. The presence of pigmented macrophage-related episcleral deposits was associated with plaque size and isotope rather than with tumour size, suggesting that, in addition to tumour regression, radiation atrophy of retinal pigment epithelium and choroid contributes to the formation of the deposits. In the paired (the same 34 pairs as in the first study) cross-sectional study of irradiated and non-irradiated UMs, clinically-visible episcleral deposits and migrating macrophages in other extratumoral tissues were studied histopathologically. Resident macrophages were present in extratumoral tissues in eyes with both irradiated and non-irradiated UM. Irradiation increased both the number of CD68+ macrophages in the sclera beneath the tumour and the number of clinically-observed episcleral macrophages aggregates. Brachytherapy seemed to alter the route of migration of macrophages: after irradiation, macrophages migrated preferentially through the sclera while in non-irradiated UMs they seemed to migrate more along the choroid. In order to understand the influence of these routes on tumour progression and regression in the future, labelling and tracking of activated macrophages in vivo is required.

The effect of structure on the dilute solution properties of branched polysaccharides studied with SEC and AsFlFFF

Cereal arabinoxylans, guar galactomannans, and dextrans produced by lactic acid bacteria(LAB) are a structurally diverse group of branched polysaccharides with nutritional and industrial functions. In this thesis, the effect of the chemical structure on the dilute solution properties of these polysaccharides was investigated using size-exclusion chromatography(SEC) and asymmetric flow field-flow fractionation (AsFlFFF) with multiple-detection. The chemical structures of arabinoxylans were determined, whereas galactomannan and dextran structures were studied in previous investigations. Characterization of arabinoxylans revealed differences in the chemical structures of cereal arabinoxylans. Although arabinoxylans from wheat, rye, and barley fiber contained similar amounts of arabinose side units, the substitution pattern of arabinoxylans from different cereals varied. Arabinoxylans from barley husks and commercial low-viscosity wheat arabinoxylan contained a lower number of arabinose side units. Structurally different dextrans were obtained from different LAB. The structural effects on the solution properties could be studied in detail by modifying pure wheat and rye arabinoxylans and guar galactomannan with specific enzymes. The solution characterization of arabinoxylans, enzymatically modified galactomannans, and dextrans revealed the presence of aggregates in aqueous polysaccharide solutions. In the case of arabinoxylans and dextrans, the comparison of molar mass data from aqueous and organic SEC analyses was essential in confirming aggregation, which could not be observed only from the peak or molar mass distribution shapes obtained with aqueous SEC. The AsFlFFF analyses gave further evidence of aggregation. Comparison of molar mass and intrinsic viscosity data of unmodified and partially debranched guar galactomannan, on the other hand, revealed the aggregation of native galactomannan. The arabinoxylan and galactomannan samples with low or enzymatically extensively decreased side unit content behaved similarly in aqueous solution: lower molar mass samples stayed in solution but formed large aggregates, whereas the water solubility of the higher-molar-mass samples decreased significantly. Due to the restricted solubility of galactomannans in organic solvents, only aqueous galactomannan solutions were studied. The SEC and AsFlFFF results differed for the wheat arabinoxylan and dextran samples. Column matrix effects and possible differences in the separation parameters are discussed, and a problem related to the non-established relationship between the separation parameters of the two separation techniques is highlighted. This thesis shows that complementary approaches in the solution characterization of chemically heterogeneous polysaccharides are needed to comprehensively investigate macromolecular behavior in solution. These results may also be valuable when characterizing other branched polysaccharides.