Effects of the digital subtitling software on the subtitling process : A survey among Finnish professional television subtitlers

Tutkielma käsittelee suomalaisten televisiotekstittäjien ammatillisuutta, käännösprosessia ja digitaalisten tekstitysohjelmien vaikutuksia tekstitysprosessiin ammattitekstittäjien näkökulmasta. Suomen television digitalisoituminen on aiheuttanut mullistuksia myös tekstitysalalla kun tekstitettävä kuvamateriaali on ryhdytty toimittamaan käännöstoimistoille ja tekstittäjille digitaalisena. Teoriaosuudessa käsitellään käännös- ja tekstitystutkimusta sekä koulutusta Suomessa, ammattitaitoa ja ammatillisuutta sekä kääntämisen apukeinoja. Tekstittäminen esitellään erikoistuneena kääntämisen muotona. On kuitenkin myös huomioitava, että kääntäminen on yksi vaihe tekstitysprosessissa. Teoriaosuus päättyy suomalaisten televisiotekstittäjien arjen ja työkentän nykytilanteen käsittelyyn – tekstittäjät työskentelevät monenlaisilla työehdoilla ja laadun kriteerit saatetaan joutua arvioimaan uudelleen. Empiirisen osan alussa esitetään, että suomalaisia televisiotekstittäjiä on haastateltu yllättävän vähän, ja Jääskeläisen ajatuksiin nojaten mainitaan, että tekstittämisen alalla on vielä paljon tutkimatta – etenkin suomalaisesta tekstitysprosessista löytyy tutkittavaa. Tutkimuskohde on ammatikseen televisioon tekstityksiä tekevät kääntäjät. Suomalaiselle tekstitykseen erikoistuneelle käännöstoimistolle työskenteleville tekstittäjille lähetettiin alkutalvesta 2008 kyselylomake, jolla kartoitettiin sekä monivalintakysymyksillä että avoimilla kysymyksillä heidän ammatillisuuttaan, työmenetelmiään, käännös- ja tekstitysprosessiaan, ammattiylpeyttään ja -identiteettiään, ajanhallintaansa, sekä heidän käyttämäänsä digitaalista tekstitysohjelmaa. Tutkimuksessa kävi ilmi, että lähes kolmanneksella vastaajista on ammatistaan neutraali tai jopa negatiivinen käsitys. Näitä tekstittäjiä yhdistää se seikka, että kaikilla on alle 5 vuotta kokemusta alalta. Valtaosa vastanneista on kuitenkin ylpeitä siitä, että toimivat suomen kielen ammattilaisina. Tekstitysprosessi oli lomakkeessa jaettu esikatseluvaiheeseen, käännösvaiheeseen, ajastamisvaiheeseen ja korjauskatseluvaiheeseen. Tekstittäjät pyydettiin mm. arvioimaan tekstitysprosessinsa kokonaiskestoa. Kestoissa ilmeni suuria eroavaisuuksia, joista ainakin osa korreloi kokemuksen kanssa. Runsas puolet vastaajista on hankkinut digitaalisen tekstitysohjelmiston käyttöönsä ja osa ajastaa edelleen käännöstoimistossa muun muassa ohjelmiston kalleuden vuoksi. Digitaalisen ohjelmiston myötä tekstitysprosessiin ja työkäytänteisiin on tullut muutoksia, kun videonauhureista ja televisioista on siirrytty pelkän tietokoneen käyttöön. On mahdollista tehdä etätyötä kaukomailta käsin, kääntää ja ajastaa lomittain tai tehdä esiajastus ja kääntää sitten. Digitaalinen tekniikka on siis mahdollistanut tekstitysprosessin muuttumisen ja vaihtoehtoiset työmenetelmät, mutta kaikista menetelmistä ei välttämättä ole tekstittäjälle hyötyä. Perinteinen tekstitysprosessi (esikatselu, repliikkijakojen merkitseminen käsikirjoitukseen, kääntäminen ja repliikkien laadinta, korjaukset ja tarkastuskatselu) vaikuttaa edelleen tehokkaimmalta. Vaikka työkäytänteet eroavat toisistaan, kokonaiskäsitys on se, että digitalisoitumisen alkukangertelujen jälkeen tekstittäjien työskentely on tehostunut.

Automatic Lameness Detection in a Milking Robot : Instrumentation, measurement software, algorithms for data analysis and a neural network model

The aim of this thesis is to develop a fully automatic lameness detection system that operates in a milking robot. The instrumentation, measurement software, algorithms for data analysis and a neural network model for lameness detection were developed. Automatic milking has become a common practice in dairy husbandry, and in the year 2006 about 4000 farms worldwide used over 6000 milking robots. There is a worldwide movement with the objective of fully automating every process from feeding to milking. Increase in automation is a consequence of increasing farm sizes, the demand for more efficient production and the growth of labour costs. As the level of automation increases, the time that the cattle keeper uses for monitoring animals often decreases. This has created a need for systems for automatically monitoring the health of farm animals. The popularity of milking robots also offers a new and unique possibility to monitor animals in a single confined space up to four times daily. Lameness is a crucial welfare issue in the modern dairy industry. Limb disorders cause serious welfare, health and economic problems especially in loose housing of cattle. Lameness causes losses in milk production and leads to early culling of animals. These costs could be reduced with early identification and treatment. At present, only a few methods for automatically detecting lameness have been developed, and the most common methods used for lameness detection and assessment are various visual locomotion scoring systems. The problem with locomotion scoring is that it needs experience to be conducted properly, it is labour intensive as an on-farm method and the results are subjective. A four balance system for measuring the leg load distribution of dairy cows during milking in order to detect lameness was developed and set up in the University of Helsinki Research farm Suitia. The leg weights of 73 cows were successfully recorded during almost 10,000 robotic milkings over a period of 5 months. The cows were locomotion scored weekly, and the lame cows were inspected clinically for hoof lesions. Unsuccessful measurements, caused by cows standing outside the balances, were removed from the data with a special algorithm, and the mean leg loads and the number of kicks during milking was calculated. In order to develop an expert system to automatically detect lameness cases, a model was needed. A probabilistic neural network (PNN) classifier model was chosen for the task. The data was divided in two parts and 5,074 measurements from 37 cows were used to train the model. The operation of the model was evaluated for its ability to detect lameness in the validating dataset, which had 4,868 measurements from 36 cows. The model was able to classify 96% of the measurements correctly as sound or lame cows, and 100% of the lameness cases in the validation data were identified. The number of measurements causing false alarms was 1.1%. The developed model has the potential to be used for on-farm decision support and can be used in a real-time lameness monitoring system.

Enhanced processing of SPOT multispectral satellite imagery for environmental monitoring and modelling

The Taita Hills in southeastern Kenya form the northernmost part of Africa’s Eastern Arc Mountains, which have been identified by Conservation International as one of the top ten biodiversity hotspots on Earth. As with many areas of the developing world, over recent decades the Taita Hills have experienced significant population growth leading to associated major changes in land use and land cover (LULC), as well as escalating land degradation, particularly soil erosion. Multi-temporal medium resolution multispectral optical satellite data, such as imagery from the SPOT HRV, HRVIR, and HRG sensors, provides a valuable source of information for environmental monitoring and modelling at a landscape level at local and regional scales. However, utilization of multi-temporal SPOT data in quantitative remote sensing studies requires the removal of atmospheric effects and the derivation of surface reflectance factor. Furthermore, for areas of rugged terrain, such as the Taita Hills, topographic correction is necessary to derive comparable reflectance throughout a SPOT scene. Reliable monitoring of LULC change over time and modelling of land degradation and human population distribution and abundance are of crucial importance to sustainable development, natural resource management, biodiversity conservation, and understanding and mitigating climate change and its impacts. The main purpose of this thesis was to develop and validate enhanced processing of SPOT satellite imagery for use in environmental monitoring and modelling at a landscape level, in regions of the developing world with limited ancillary data availability. The Taita Hills formed the application study site, whilst the Helsinki metropolitan region was used as a control site for validation and assessment of the applied atmospheric correction techniques, where multiangular reflectance field measurements were taken and where horizontal visibility meteorological data concurrent with image acquisition were available. The proposed historical empirical line method (HELM) for absolute atmospheric correction was found to be the only applied technique that could derive surface reflectance factor within an RMSE of < 0.02 ps in the SPOT visible and near-infrared bands; an accuracy level identified as a benchmark for successful atmospheric correction. A multi-scale segmentation/object relationship modelling (MSS/ORM) approach was applied to map LULC in the Taita Hills from the multi-temporal SPOT imagery. This object-based procedure was shown to derive significant improvements over a uni-scale maximum-likelihood technique. The derived LULC data was used in combination with low cost GIS geospatial layers describing elevation, rainfall and soil type, to model degradation in the Taita Hills in the form of potential soil loss, utilizing the simple universal soil loss equation (USLE). Furthermore, human population distribution and abundance were modelled with satisfactory results using only SPOT and GIS derived data and non-Gaussian predictive modelling techniques. The SPOT derived LULC data was found to be unnecessary as a predictor because the first and second order image texture measurements had greater power to explain variation in dwelling unit occurrence and abundance. The ability of the procedures to be implemented locally in the developing world using low-cost or freely available data and software was considered. The techniques discussed in this thesis are considered equally applicable to other medium- and high-resolution optical satellite imagery, as well the utilized SPOT data.

Measuring and tracking quality factors in Free and Open Source Software projects

Free and Open Source Software (FOSS) has gained increased interest in the computer software industry, but assessing its quality remains a challenge. FOSS development is frequently carried out by globally distributed development teams, and all stages of development are publicly visible. Several product and process-level quality factors can be measured using the public data. This thesis presents a theoretical background for software quality and metrics and their application in a FOSS environment. Information available from FOSS projects in three information spaces are presented, and a quality model suitable for use in a FOSS context is constructed. The model includes both process and product quality metrics, and takes into account the tools and working methods commonly used in FOSS projects. A subset of the constructed quality model is applied to three FOSS projects, highlighting both theoretical and practical concerns in implementing automatic metric collection and analysis. The experiment shows that useful quality information can be extracted from the vast amount of data available. In particular, projects vary in their growth rate, complexity, modularity and team structure.

Free/Open Source Software Development : Results and Research Methods

Free and open source software development is an alternative to traditional software engineering as an approach to the development of complex software systems. It is a way of developing software based on geographically distributed teams of volunteers without apparent central plan or traditional mechanisms of coordination. The purpose of this thesis is to summarize the current knowledge about free and open source software development and explore the ways on which further understanding on it could be gained. The results of research on the field as well as the research methods are introduced and discussed. Also adapting software process metrics to the context of free and open source software development is illustrated and the possibilities to utilize them as tools to validate other research are discussed.

Cryptographic Software Export Controls in the EU

Certain software products employing digital techniques for encryption of data are subject to export controls in the EU Member States pursuant to Community law and relevant laws in the Member States. These controls are agreed globally in the framework of the so-called Wassenaar Arrangement. Wassenaar is an informal non-proliferation regime aimed at promoting international stability and responsibility in transfers of strategic (dual-use) products and technology. This thesis covers provisions of Wassenaar, Community export control laws and export control laws of Finland, Sweden, Germany, France and United Kingdom. This thesis consists of five chapters. The first chapter discusses the ratio of export control laws and the impact they have on global trade. The ratio is originally defence-related - in general to prevent potential adversaries of participating States from having the same tools, and in particular in the case of cryptographic software to enable signals intelligence efforts. Increasingly as the use of cryptography in a civilian context has mushroomed, export restrictions can have negative effects on civilian trade. Information security solutions may also be took weak because of export restrictions on cryptography. The second chapter covers the OECD's Cryptography Policy, which had a significant effect on its member nations' national cryptography policies and legislation. The OECD is a significant organization,because it acts as a meeting forum for most important industrialized nations. The third chapter covers the Wassenaar Arrangement. The Arrangement is covered from the viewpoint of international law and politics. The Wassenaar control list provisions affecting cryptographic software transfers are also covered in detail. Control lists in the EU and in Member States are usually directly copied from Wassenaar control lists. Controls agreed in its framework set only a minimum level for participating States. However, Wassenaar countries can adopt stricter controls. The fourth chapter covers Community export control law. Export controls are viewed in Community law as falling within the domain of Common Commercial Policy pursuant to Article 133 of the EC Treaty. Therefore the Community has exclusive competence in export matters, save where a national measure is authorized by the Community or falls under foreign or security policy derogations established in Community law. The Member States still have a considerable amount of power in the domain of Common Foreign and Security Policy. They are able to maintain national export controls because export control laws are not fully harmonized. This can also have possible detrimental effects on the functioning of internal market and common export policies. In 1995 the EU adopted Dual-Use Regulation 3381/94/EC, which sets common rules for exports in Member States. Provisions of this regulation receive detailed coverage in this chapter. The fifth chapter covers national legislation and export authorization practices in five different Member States - in Finland, Sweden, Germany, France and in United Kingdom. Export control laws of those Member States are covered when the national laws differ from the uniform approach of the Community's acquis communautaire. Keywords: export control, encryption, software, dual-use, license, foreign trade, e-commerce, Internet

Muuttoliike ja vetovoimatekijät Helsingissä : - Kyselyaineiston analyysi

This thesis explores migration and the attractiveness of urban living in the Greater Helsinki region. The aim of the thesis is to explore the attractiveness of the city of Helsinki in terms of regional migration and to identify what characterizes migration to Helsinki. The study focuses in particular on housing, which is a key factor influencing migration decisions in the region. Other central themes in the study are housing policy and regional competition among municipalities. This study focuses solely on households moving within Finnish borders excluding international migration. Migration is examined by comparing in- and out-migration in Helsinki, as well as studying migration to the city s inner and outer areas. The primary research material in the study is a questionnaire data collected by the National Consumer Research Centre. In this thesis the data is used for studying migrants aged 25 45. The main research method is analyzing the data statistically using the SPSS software. Methods include frequency analysis, cross tabulation, factor analysis and descriptive analysis. Additionally, statistical data is used to complement the questionnaire data. The research results indicate that Helsinki s in- and out-migration differs both in terms of the type of households that migrate as well as in the reasons why they migrate. Furthermore, differences can also be detected between migration to the inner and outer parts of Helsinki. According to the research results, a household s current phase of life is crucial in determining where and why they move within the Greater Helsinki region. A household s set of values on the other hand, seems to have a lesser impact on migration within the region, even though households moving to Helsinki seem to value a somewhat more urban lifestyle than the ones moving out of the city. The research also shows a direct correlation between the values of migrants and their current phase of life. Decisions of migrating are heavily influenced by wider societal issues. In the Greater Helsinki region the labor and housing market appear to have a great influence on the direction of migration streams. According to the results, households move to and from Helsinki for different reasons. The primary reasons for moving to Helsinki are related to the city s diverse labor market and to the working careers of households. Issues related to urban living and an urban lifestyle seem to be relevant although not the main reason why people move to Helsinki. The research material indicates that Helsinki s urban environment is both a pull and a push factor affecting the decisions of migrants. The city attracts those seeking urban living, but on the contrary does not appeal to households seeking more space and wishing to live closer to nature. According to the research, Helsinki with its densely built urban environment mainly attracts singles and childless couples, whereas the city region s other municipalities are more attractive for families with children. Housing policy is one of the main reasons determining where people move within the Helsinki region. As for the city of Helsinki, improving the city s attractiveness seems to be closely linked to how well the city manages to execute its future housing policies and how well alternative living preferences can be taken into account in planning.

Constructing Stability in Software Product Development during Organizational Restructurings

We all have fresh in our memory what happened to the IT sector only a few years ago when the IT-bubble burst. The upswing of productivity in this sector slowed down, investors lost large investments, many found themselves looking for a new job, and countless dreams fell apart. Product developers in the IT sector have experienced a large number of organizational restructurings since the IT boom, including rapid growth, downsizing processes, and structural reforms. Organizational restructurings seem to be a complex and continuous phenomenon people in this sector have to deal with. How do software product developers retrospectively construct their work in relation to organizational restructurings? How do organizational restructurings bring about specific social processes in product development? This working paper focuses on these questions. The overall aim is to develop an understanding of how software product developers construct their work during organizational restructurings. The theoretical frame of reference is based on a social constructionist approach and discourse analysis. This approach offers more or less radical and critical alternatives to mainstream organizational theory. Writings from this perspective attempt to investigate and understand sociocultural processes by which various realities are created. Therefore these studies aim at showing how people participate in constituting the social world (Gergen & Thatchenkery, 1996); knowledge of the world is seen to be constructed between people in daily interaction, in which language plays a central role. This means that interaction, especially the ways of talking and writing about product development during organizational restructurings, become the target of concern. This study consists of 25 in-depth interviews following a pilot study based on 57 semi-structured interviews. In this working paper I analyze 9 in-depth interviews. The interviews were conducted in eight IT firms. The analysis explores how discourses are constructed and function, as well as the consequences that follow from different discourses. The analysis shows that even though the product developers have experienced many organizational restructurings, some of which have been far-reaching, their accounts build strongly on a stability discourse. According to this discourse product development is, perhaps surprisingly, not influenced to a great extent by organizational restructurings. This does not mean that product development is static. According to the social constructionist approach, product development is constantly being reproduced and maintained in ongoing processes. In other words stable effects are also ongoing achievements and these are of particular interest in this study. The product developers maintain rather than change the product development through ongoing processes of construction, even when they experience continuous extensive organizational restructurings. The discourse of stability exists alongside other discourses, some which contradict each other. Together they direct product development and generate meanings. The product developers consequently take an active role in the construction of their work during organizational restructurings. When doing this they also negotiate credible positions for themselves

'... the walls fell down but the blokes just coded ...' - Varieties of stability in software product development during organizational restructurings

Many Finnish IT companies have gone through numerous organizational changes over the past decades. This book draws attention to how stability may be central to software product development experts and IT workers more generally, who continuously have to cope with such change in their workplaces. It does so by analyzing and theorizing change and stability as intertwined and co-existent, thus throwing light on how it is possible that, for example, even if ‘the walls fall down the blokes just code’ and maintain a sense of stability in their daily work. Rather than reproducing the picture of software product development as exciting cutting edge activities and organizational change as dramatic episodes, the study takes the reader beyond the myths surrounding these phenomena to the mundane practices, routines and organizings in product development during organizational change. An analysis of these ordinary practices offers insights into how software product development experts actively engage in constructing stability during organizational change through a variety of practices, including solidarity, homosociality, close relations to products, instrumental or functional views on products, preoccupations with certain tasks and humble obedience. Consequently, the study shows that it may be more appropriate to talk about varieties of stability, characterized by a multitude of practices of stabilizing rather than states of stagnation. Looking at different practices of stability in depth shows the creation of software as an arena for micro-politics, power relations and increasing pressures for order and formalization. The thesis gives particular attention to power relations and processes of positioning following organizational change: how social actors come to understand themselves in the context of ongoing organizational change, how they comply with and/or contest dominant meanings, how they identify and dis-identify with formalization, and how power relations often are reproduced despite dis-identification. Related to processes of positioning, the reader is also given a glimpse into what being at work in a male-dominated and relatively homogeneous work environment looks like. It shows how the strong presence of men or “blokes” of a particular age and education seems to become invisible in workplace talk that appears ‘non-conscious’ of gender.

Lean Thinking in Software Development : Impacts of Kanban on Projects

The history of software development in a somewhat systematical way has been performed for half a century. Despite this time period, serious failures in software development projects still occur. The pertinent mission of software project management is to continuously achieve more and more successful projects. The application of agile software methods and more recently the integration of Lean practices contribute to this trend of continuous improvement in the software industry. One such area warranting proper empirical evidence is the operational efficiency of projects. In the field of software development, Kanban as a process management method has gained momentum recently, mostly due to its linkages to Lean thinking. However, only a few empirical studies investigate the impacts of Kanban on projects in that particular area. The aim of this doctoral thesis is to improve the understanding of how Kanban impacts on software projects. The research is carried out in the area of Lean thinking, which contains a variety of concepts including Kanban. This article-type thesis conducts a set of case studies expanded with the research strategy of quasi-controlled experiment. The data-gathering techniques of interviews, questionnaires, and different types of observations are used to study the case projects, and thereby to understand the impacts of Kanban on software development projects. The research papers of the thesis are refereed, international journal and conference publications. The results highlight new findings regarding the application of Kanban in the software context. The key findings of the thesis suggest that Kanban is applicable to software development. Despite its several benefits reported in this thesis, the empirical evidence implies that Kanban is not all-encompassing but requires additional practices to keep development projects performing appropriately. Implications for research are given, as well. In addition to these findings, the thesis contributes in the area of plan-driven software development by suggesting implications both for research and practitioners. As a conclusion, Kanban can benefit software development projects but additional practices would increase its potential for the projects.